! Started logfile: J1416+3444_X_2017_06_10_pus_uvs.log on Mon May 6 12:49:00 2019 obs J1416+3444_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1416+3444_X_2017_06_10_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.911265 visibilities/baseline/integration-bin. ! Found source: J1416+3444 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 70860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1416+3444_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.813928Jy sigma=0.007372 ! Fit after self-cal, rms=0.789460Jy sigma=0.007164 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7609 mas, bmaj=1.246 mas, bpa=-6.258 degrees ! Estimated noise=678.612 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162161 Jy ! Component: 100 - total flux cleaned = 0.233273 Jy ! Total flux subtracted in 100 components = 0.233273 Jy ! Clean residual min=-0.026784 max=0.106193 Jy/beam ! Clean residual mean=-0.000111 rms=0.008736 Jy/beam ! Combined flux in latest and established models = 0.233273 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.233273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.222661Jy sigma=0.002063 ! Fit after self-cal, rms=0.221862Jy sigma=0.002057 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1.2, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0974908 Jy ! Component: 100 - total flux cleaned = 0.1508 Jy ! Total flux subtracted in 100 components = 0.1508 Jy ! Clean residual min=-0.016658 max=0.041396 Jy/beam ! Clean residual mean=-0.000019 rms=0.005040 Jy/beam ! Combined flux in latest and established models = 0.384073 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.384073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151094Jy sigma=0.001378 ! Fit after self-cal, rms=0.138907Jy sigma=0.001276 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0497527 Jy ! Component: 100 - total flux cleaned = 0.0802395 Jy ! Total flux subtracted in 100 components = 0.0802395 Jy ! Clean residual min=-0.009407 max=0.024852 Jy/beam ! Clean residual mean=0.000018 rms=0.002922 Jy/beam ! Combined flux in latest and established models = 0.464312 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 42 components and 0.464312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107699Jy sigma=0.000970 ! Fit after self-cal, rms=0.106509Jy sigma=0.000959 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (0.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263342 Jy ! Component: 100 - total flux cleaned = 0.0443115 Jy ! Total flux subtracted in 100 components = 0.0443115 Jy ! Clean residual min=-0.006716 max=0.010481 Jy/beam ! Clean residual mean=0.000039 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.508624 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.508624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095152Jy sigma=0.000843 ! Fit after self-cal, rms=0.094886Jy sigma=0.000841 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01441 Jy ! Component: 100 - total flux cleaned = 0.0250247 Jy ! Total flux subtracted in 100 components = 0.0250247 Jy ! Clean residual min=-0.005769 max=0.008782 Jy/beam ! Clean residual mean=0.000052 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.533649 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.533649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090659Jy sigma=0.000796 ! Fit after self-cal, rms=0.090590Jy sigma=0.000796 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9718 mas, bmaj=1.534 mas, bpa=-4.695 degrees ! Estimated noise=293.561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167175 Jy ! Component: 100 - total flux cleaned = 0.0278262 Jy ! Component: 150 - total flux cleaned = 0.0356176 Jy ! Component: 200 - total flux cleaned = 0.0411934 Jy ! Total flux subtracted in 200 components = 0.0411934 Jy ! Clean residual min=-0.007450 max=0.012821 Jy/beam ! Clean residual mean=0.000196 rms=0.002990 Jy/beam ! Combined flux in latest and established models = 0.574842 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 76 components and 0.574842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087158Jy sigma=0.000758 ! Fit after self-cal, rms=0.087113Jy sigma=0.000757 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.01 KP 0.97 ! LA 0.96 MK 0.98 NL 1.01 OV 0.98 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.00 KP 0.95 ! LA 0.97 MK 0.99 NL 1.02 OV 0.97 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.99 KP 0.95 ! LA 1.00 MK 1.05 NL 1.04 OV 0.97 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 1.00 KP 0.95 ! LA 1.00 MK 1.00 NL 1.01 OV 0.97 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 0.96 KP 0.96 ! LA 0.98 MK 1.06 NL 1.01 OV 0.98 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 0.99 KP 0.97 ! LA 1.00 MK 0.99 NL 1.02 OV 0.97 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 1.02 KP 0.97 ! LA 1.00 MK 1.00 NL 1.01 OV 0.98 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.06 KP 0.97 ! LA 0.99 MK 1.00 NL 1.00 OV 0.98 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.00 KP 0.97 ! LA 1.01 MK 0.99 NL 1.04 OV 0.98 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.00 KP 0.97 ! LA 1.02 MK 1.02 NL 1.02 OV 0.98 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.01 KP 0.98 ! LA 1.03 MK 1.03 NL 1.04 OV 0.98 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.96 HN 0.96 KP 0.93 ! LA 1.01 MK 0.99 NL 0.98 OV 0.98 ! PT 1.06 SC 1.05 ! ! ! Fit before self-cal, rms=0.087113Jy sigma=0.000757 ! Fit after self-cal, rms=0.087454Jy sigma=0.000737 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9804 mas, bmaj=1.55 mas, bpa=-5.333 degrees ! Estimated noise=294.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145746 Jy ! Component: 100 - total flux cleaned = -0.000129173 Jy ! Component: 150 - total flux cleaned = -0.000128993 Jy ! Component: 200 - total flux cleaned = -0.00016876 Jy ! Total flux subtracted in 200 components = -0.00016876 Jy ! Clean residual min=-0.006494 max=0.010759 Jy/beam ! Clean residual mean=0.000140 rms=0.002560 Jy/beam ! Combined flux in latest and established models = 0.574674 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 86 components and 0.574674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087395Jy sigma=0.000736 ! Fit after self-cal, rms=0.087421Jy sigma=0.000736 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087421Jy sigma=0.000736 ! Fit after self-cal, rms=0.087463Jy sigma=0.000724 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9762 mas, bmaj=1.549 mas, bpa=-5.741 degrees ! Estimated noise=293.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258686 Jy ! Component: 100 - total flux cleaned = 0.000223811 Jy ! Component: 150 - total flux cleaned = 0.000190969 Jy ! Component: 200 - total flux cleaned = 0.000161922 Jy ! Total flux subtracted in 200 components = 0.000161922 Jy ! Clean residual min=-0.005640 max=0.010279 Jy/beam ! Clean residual mean=0.000127 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.574836 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.574836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087431Jy sigma=0.000723 ! Fit after self-cal, rms=0.087446Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117284 Jy ! Component: 100 - total flux cleaned = 0.0196681 Jy ! Component: 150 - total flux cleaned = 0.0254794 Jy ! Component: 200 - total flux cleaned = 0.0298582 Jy ! Total flux subtracted in 200 components = 0.0298582 Jy ! Clean residual min=-0.004328 max=0.007785 Jy/beam ! Clean residual mean=0.000053 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.604694 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 145 components and 0.604694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085722Jy sigma=0.000701 ! Fit after self-cal, rms=0.085530Jy sigma=0.000699 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085530Jy sigma=0.000699 ! Fit after self-cal, rms=0.085286Jy sigma=0.000698 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9762 mas, bmaj=1.55 mas, bpa=-5.826 degrees ! Estimated noise=292.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557461 Jy ! Component: 100 - total flux cleaned = 0.00930543 Jy ! Component: 150 - total flux cleaned = 0.0120801 Jy ! Component: 200 - total flux cleaned = 0.01364 Jy ! Total flux subtracted in 200 components = 0.01364 Jy ! Clean residual min=-0.003691 max=0.006695 Jy/beam ! Clean residual mean=0.000032 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.618334 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 157 components and 0.618334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084902Jy sigma=0.000693 ! Fit after self-cal, rms=0.084834Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.2, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623298 Jy ! Component: 100 - total flux cleaned = 0.00980601 Jy ! Component: 150 - total flux cleaned = 0.0123956 Jy ! Component: 200 - total flux cleaned = 0.0142264 Jy ! Total flux subtracted in 200 components = 0.0142264 Jy ! Clean residual min=-0.003271 max=0.006347 Jy/beam ! Clean residual mean=0.000029 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.63256 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 182 components and 0.63256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084377Jy sigma=0.000686 ! Fit after self-cal, rms=0.084337Jy sigma=0.000686 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (2.4, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477067 Jy ! Component: 100 - total flux cleaned = 0.00631506 Jy ! Component: 150 - total flux cleaned = 0.00731183 Jy ! Component: 200 - total flux cleaned = 0.00801595 Jy ! Total flux subtracted in 200 components = 0.00801595 Jy ! Clean residual min=-0.002842 max=0.004413 Jy/beam ! Clean residual mean=0.000039 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.640576 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 202 components and 0.640576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083994Jy sigma=0.000682 ! Fit after self-cal, rms=0.083944Jy sigma=0.000682 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (20.2, 17.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386744 Jy ! Component: 100 - total flux cleaned = 0.00545681 Jy ! Component: 150 - total flux cleaned = 0.00677123 Jy ! Component: 200 - total flux cleaned = 0.00776574 Jy ! Total flux subtracted in 200 components = 0.00776574 Jy ! Clean residual min=-0.002356 max=0.003300 Jy/beam ! Clean residual mean=0.000028 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.648342 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 225 components and 0.648342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083704Jy sigma=0.000679 ! Fit after self-cal, rms=0.083688Jy sigma=0.000679 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (13.2, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299251 Jy ! Component: 100 - total flux cleaned = 0.00400716 Jy ! Component: 150 - total flux cleaned = 0.00505186 Jy ! Component: 200 - total flux cleaned = 0.00607199 Jy ! Total flux subtracted in 200 components = 0.00607199 Jy ! Clean residual min=-0.002096 max=0.002517 Jy/beam ! Clean residual mean=0.000012 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.654414 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 241 components and 0.654414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083532Jy sigma=0.000677 ! Fit after self-cal, rms=0.083521Jy sigma=0.000677 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083521Jy sigma=0.000677 ! Fit after self-cal, rms=0.083309Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.308 mas, bmaj=2.555 mas, bpa=-5.32 degrees ! Estimated noise=364.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388131 Jy ! Component: 100 - total flux cleaned = 0.0061486 Jy ! Component: 150 - total flux cleaned = 0.00775398 Jy ! Component: 200 - total flux cleaned = 0.00922441 Jy ! Total flux subtracted in 200 components = 0.00922441 Jy ! Clean residual min=-0.002638 max=0.003305 Jy/beam ! Clean residual mean=0.000027 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.663638 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 264 components and 0.663638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083226Jy sigma=0.000675 ! Fit after self-cal, rms=0.083212Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100637 Jy ! Component: 100 - total flux cleaned = 0.0020649 Jy ! Component: 150 - total flux cleaned = 0.00299443 Jy ! Component: 200 - total flux cleaned = 0.0038128 Jy ! Total flux subtracted in 200 components = 0.0038128 Jy ! Clean residual min=-0.002333 max=0.002746 Jy/beam ! Clean residual mean=0.000010 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.667451 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 274 components and 0.667451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083198Jy sigma=0.000675 ! Fit after self-cal, rms=0.083191Jy sigma=0.000675 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9741 mas, bmaj=1.546 mas, bpa=-6.236 degrees ! Estimated noise=291.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9741 x 1.546 at -6.236 degrees (North through East) ! Clean map min=-0.001692 max=0.19856 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7598 mas, bmaj=1.255 mas, bpa=-7.967 degrees ! Estimated noise=675.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180823 Jy ! Component: 100 - total flux cleaned = 0.283819 Jy ! Component: 150 - total flux cleaned = 0.352102 Jy ! Component: 200 - total flux cleaned = 0.401214 Jy ! Total flux subtracted in 200 components = 0.401214 Jy ! Clean residual min=-0.010617 max=0.028100 Jy/beam ! Clean residual mean=-0.000034 rms=0.003697 Jy/beam ! Combined flux in latest and established models = 0.401215 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.401215 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9741 mas, bmaj=1.546 mas, bpa=-6.236 degrees ! Estimated noise=291.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580836 Jy ! Component: 100 - total flux cleaned = 0.0949933 Jy ! Component: 150 - total flux cleaned = 0.119648 Jy ! Component: 200 - total flux cleaned = 0.137658 Jy ! Total flux subtracted in 200 components = 0.137658 Jy ! Clean residual min=-0.006849 max=0.010578 Jy/beam ! Clean residual mean=0.000067 rms=0.002827 Jy/beam ! Combined flux in latest and established models = 0.538873 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 84 components and 0.538873 Jy ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.308 mas, bmaj=2.555 mas, bpa=-5.32 degrees ! Estimated noise=364.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258629 Jy ! Component: 100 - total flux cleaned = 0.0433344 Jy ! Component: 150 - total flux cleaned = 0.0566029 Jy ! Component: 200 - total flux cleaned = 0.0671746 Jy ! Total flux subtracted in 200 components = 0.0671746 Jy ! Clean residual min=-0.006570 max=0.007492 Jy/beam ! Clean residual mean=0.000084 rms=0.002680 Jy/beam ! Combined flux in latest and established models = 0.606048 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879791 Jy ! Component: 100 - total flux cleaned = 0.0162273 Jy ! Component: 150 - total flux cleaned = 0.0225501 Jy ! Component: 200 - total flux cleaned = 0.0279979 Jy ! Total flux subtracted in 200 components = 0.0279979 Jy ! Clean residual min=-0.004212 max=0.004912 Jy/beam ! Clean residual mean=0.000041 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 0.634045 Jy ! Adding 146 model components to the UV plane model. ! The established model now contains 215 components and 0.634046 Jy ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9741 mas, bmaj=1.546 mas, bpa=-6.236 degrees ! Estimated noise=291.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440099 Jy ! Component: 100 - total flux cleaned = 0.0080975 Jy ! Component: 150 - total flux cleaned = 0.0107238 Jy ! Component: 200 - total flux cleaned = 0.012532 Jy ! Total flux subtracted in 200 components = 0.012532 Jy ! Clean residual min=-0.002626 max=0.003131 Jy/beam ! Clean residual mean=0.000014 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.646578 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 245 components and 0.646578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083763Jy sigma=0.000681 ! Fit after self-cal, rms=0.083693Jy sigma=0.000680 wmodel J1416+3444_X_2017_06_10_pus_map.mod ! Writing 245 model components to file: J1416+3444_X_2017_06_10_pus_map.mod wobs J1416+3444_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1416+3444_X_2017_06_10_pus_uvs.fits wwins J1416+3444_X_2017_06_10_pus_map.win ! wwins: Wrote 8 windows to J1416+3444_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139153 Jy ! Component: 100 - total flux cleaned = 0.00266027 Jy ! Component: 150 - total flux cleaned = 0.00361208 Jy ! Component: 200 - total flux cleaned = 0.00420162 Jy ! Component: 250 - total flux cleaned = 0.00467867 Jy ! Component: 300 - total flux cleaned = 0.00513533 Jy ! Component: 350 - total flux cleaned = 0.00553614 Jy ! Component: 400 - total flux cleaned = 0.00600317 Jy ! Component: 450 - total flux cleaned = 0.00638038 Jy ! Component: 500 - total flux cleaned = 0.00682079 Jy ! Component: 550 - total flux cleaned = 0.00724883 Jy ! Component: 600 - total flux cleaned = 0.00763131 Jy ! Component: 650 - total flux cleaned = 0.00807222 Jy ! Component: 700 - total flux cleaned = 0.00827131 Jy ! Component: 750 - total flux cleaned = 0.00853096 Jy ! Component: 800 - total flux cleaned = 0.00865771 Jy ! Component: 850 - total flux cleaned = 0.00878196 Jy ! Component: 900 - total flux cleaned = 0.00884317 Jy ! Component: 950 - total flux cleaned = 0.00887383 Jy ! Component: 1000 - total flux cleaned = 0.00893357 Jy ! Component: 1050 - total flux cleaned = 0.00899155 Jy ! Component: 1100 - total flux cleaned = 0.00904759 Jy ! Component: 1150 - total flux cleaned = 0.00907521 Jy ! Component: 1200 - total flux cleaned = 0.00907523 Jy ! Component: 1250 - total flux cleaned = 0.00912969 Jy ! Component: 1300 - total flux cleaned = 0.00915613 Jy ! Component: 1350 - total flux cleaned = 0.00923457 Jy ! Component: 1400 - total flux cleaned = 0.00920839 Jy ! Component: 1450 - total flux cleaned = 0.00925939 Jy ! Component: 1500 - total flux cleaned = 0.00925904 Jy ! Component: 1550 - total flux cleaned = 0.00928378 Jy ! Component: 1600 - total flux cleaned = 0.00935671 Jy ! Component: 1650 - total flux cleaned = 0.00938059 Jy ! Component: 1700 - total flux cleaned = 0.00938017 Jy ! Component: 1750 - total flux cleaned = 0.00938004 Jy ! Component: 1800 - total flux cleaned = 0.0093341 Jy ! Component: 1850 - total flux cleaned = 0.00940254 Jy ! Component: 1900 - total flux cleaned = 0.00937996 Jy ! Component: 1950 - total flux cleaned = 0.00933594 Jy ! Component: 2000 - total flux cleaned = 0.00940156 Jy ! Total flux subtracted in 2048 components = 0.00933682 Jy ! Clean residual min=-0.001132 max=0.001111 Jy/beam ! Clean residual mean=0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.655915 Jy keep ! Adding 163 model components to the UV plane model. ! The established model now contains 395 components and 0.655915 Jy ![Exited script file: muppet] wmap "J1416+3444_X_2017_06_10_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9741 x 1.546 at -6.236 degrees (North through East) ! Clean map min=-0.0019972 max=0.20125 Jy/beam ! Writing clean map to FITS file: J1416+3444_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.201251 invert ! Inverting map ! Your choice of large map pixels excluded 0.133% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000416134 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.620322 0.620322 1.24064 2.48129 4.96257 9.92515 19.8503 39.7006 79.4012 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.201 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9741 x 1.546 at -6.236 degrees (North through East) ! Clean map min=-0.0019972 max=0.20125 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1416+3444_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:49:06 2019