! Started logfile: J1415-2809_X_2017_07_09_pus_uvs.log on Wed May 8 15:26:13 2019 obs J1415-2809_X_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1415-2809_X_2017_07_09_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.871345 visibilities/baseline/integration-bin. ! Found source: J1415-2809 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 979 lines of history. ! ! Reading 35760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1415-2809_X_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.924336Jy sigma=0.006829 ! Fit after self-cal, rms=0.903222Jy sigma=0.006672 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6845 mas, bmaj=2.019 mas, bpa=-0.5405 degrees ! Estimated noise=1029.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728364 Jy ! Component: 100 - total flux cleaned = 0.0920148 Jy ! Total flux subtracted in 100 components = 0.0920148 Jy ! Clean residual min=-0.004600 max=0.008556 Jy/beam ! Clean residual mean=-0.000042 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.0920148 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0920148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095015Jy sigma=0.000660 ! Fit after self-cal, rms=0.094987Jy sigma=0.000660 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00978388 Jy ! Component: 100 - total flux cleaned = 0.0150873 Jy ! Total flux subtracted in 100 components = 0.0150873 Jy ! Clean residual min=-0.003392 max=0.004071 Jy/beam ! Clean residual mean=-0.000021 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.107102 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.107102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093578Jy sigma=0.000648 ! Fit after self-cal, rms=0.093567Jy sigma=0.000648 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8849 mas, bmaj=2.496 mas, bpa=0.5504 degrees ! Estimated noise=560.985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502946 Jy ! Component: 100 - total flux cleaned = 0.00721802 Jy ! Component: 150 - total flux cleaned = 0.00831684 Jy ! Component: 200 - total flux cleaned = 0.00885142 Jy ! Total flux subtracted in 200 components = 0.00885142 Jy ! Clean residual min=-0.002154 max=0.003185 Jy/beam ! Clean residual mean=-0.000023 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.115954 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.115954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093341Jy sigma=0.000646 ! Fit after self-cal, rms=0.093343Jy sigma=0.000646 ! Inverting map ! Added new window around map position (3.8, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279358 Jy ! Component: 100 - total flux cleaned = 0.00403985 Jy ! Component: 150 - total flux cleaned = 0.00457119 Jy ! Component: 200 - total flux cleaned = 0.00483806 Jy ! Total flux subtracted in 200 components = 0.00483806 Jy ! Clean residual min=-0.001876 max=0.001950 Jy/beam ! Clean residual mean=-0.000004 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.120792 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 50 components and 0.120792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093262Jy sigma=0.000646 ! Fit after self-cal, rms=0.093256Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.22 KP 1.02 ! LA 0.96 MK 0.92 NL 1.03 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.09 KP 1.02 ! LA 0.97 MK 0.94 NL 1.01 OV 0.98 ! PT 1.06 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.15 KP 0.97 ! LA 1.02 MK 0.97 NL 1.02 OV 0.95 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.06 KP 0.98 ! LA 1.01 MK 1.01 NL 0.99 OV 1.03 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.00* KP 0.97 ! LA 0.97 MK 0.99 NL 1.01 OV 0.98 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00* KP 0.97 ! LA 0.96 MK 0.97 NL 1.02 OV 1.03 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.03 KP 0.97 ! LA 1.01 MK 1.02 NL 1.03 OV 1.02 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 1.00* KP 0.99 ! LA 0.96 MK 0.94 NL 1.03 OV 0.99 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00* KP 0.98 ! LA 1.02 MK 1.03 NL 0.97 OV 0.96 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.00* KP 1.03 ! LA 1.01 MK 2.14 NL 1.01 OV 1.07 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00* KP 1.02 ! LA 0.99 MK 0.99 NL 1.00* OV 0.98 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 1.00* KP 0.98 ! LA 0.96 MK 0.90 NL 1.00* OV 0.99 ! PT 1.00 SC 0.93 ! ! ! Fit before self-cal, rms=0.093256Jy sigma=0.000645 ! Fit after self-cal, rms=0.095650Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8887 mas, bmaj=2.504 mas, bpa=0.781 degrees ! Estimated noise=562.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000924202 Jy ! Component: 100 - total flux cleaned = 0.00110138 Jy ! Component: 150 - total flux cleaned = 0.00117119 Jy ! Component: 200 - total flux cleaned = 0.00121277 Jy ! Total flux subtracted in 200 components = 0.00121277 Jy ! Clean residual min=-0.001606 max=0.001809 Jy/beam ! Clean residual mean=-0.000001 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.122004 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.122004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095633Jy sigma=0.000644 ! Fit after self-cal, rms=0.095691Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095691Jy sigma=0.000643 ! Fit after self-cal, rms=0.095993Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.504 mas, bpa=0.7868 degrees ! Estimated noise=562.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328232 Jy ! Component: 100 - total flux cleaned = 0.000407507 Jy ! Component: 150 - total flux cleaned = 0.000407084 Jy ! Component: 200 - total flux cleaned = 0.000424623 Jy ! Total flux subtracted in 200 components = 0.000424623 Jy ! Clean residual min=-0.001587 max=0.001771 Jy/beam ! Clean residual mean=-0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.122429 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.122429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095985Jy sigma=0.000643 ! Fit after self-cal, rms=0.095989Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146162 Jy ! Component: 100 - total flux cleaned = 0.00165342 Jy ! Component: 150 - total flux cleaned = 0.00169791 Jy ! Component: 200 - total flux cleaned = 0.00178021 Jy ! Total flux subtracted in 200 components = 0.00178021 Jy ! Clean residual min=-0.001534 max=0.001294 Jy/beam ! Clean residual mean=-0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.124209 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.124209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095962Jy sigma=0.000643 ! Fit after self-cal, rms=0.095961Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095961Jy sigma=0.000643 ! Fit after self-cal, rms=0.096623Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8916 mas, bmaj=2.51 mas, bpa=0.7381 degrees ! Estimated noise=561.851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.72958e-05 Jy ! Component: 100 - total flux cleaned = -9.83872e-05 Jy ! Component: 150 - total flux cleaned = -8.00582e-05 Jy ! Component: 200 - total flux cleaned = -9.6235e-05 Jy ! Total flux subtracted in 200 components = -9.6235e-05 Jy ! Clean residual min=-0.001167 max=0.001212 Jy/beam ! Clean residual mean=0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.124113 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.124113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096614Jy sigma=0.000642 ! Fit after self-cal, rms=0.096639Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.43952e-05 Jy ! Component: 100 - total flux cleaned = 3.42622e-05 Jy ! Component: 150 - total flux cleaned = 4.79565e-05 Jy ! Component: 200 - total flux cleaned = 4.7274e-05 Jy ! Total flux subtracted in 200 components = 4.7274e-05 Jy ! Clean residual min=-0.001163 max=0.001211 Jy/beam ! Clean residual mean=0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.12416 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.12416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096635Jy sigma=0.000642 ! Fit after self-cal, rms=0.096634Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096634Jy sigma=0.000642 ! Fit after self-cal, rms=0.096680Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.513 mas, bmaj=6.253 mas, bpa=-2.155 degrees ! Estimated noise=699.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121531 Jy ! Component: 100 - total flux cleaned = 9.53474e-05 Jy ! Component: 150 - total flux cleaned = 6.02956e-05 Jy ! Component: 200 - total flux cleaned = 1.84876e-05 Jy ! Total flux subtracted in 200 components = 1.84876e-05 Jy ! Clean residual min=-0.001358 max=0.001142 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.124179 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 122 components and 0.124179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096679Jy sigma=0.000642 ! Fit after self-cal, rms=0.096682Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.22225e-05 Jy ! Component: 100 - total flux cleaned = 4.15771e-05 Jy ! Component: 150 - total flux cleaned = 3.2536e-05 Jy ! Component: 200 - total flux cleaned = 1.60786e-05 Jy ! Total flux subtracted in 200 components = 1.60786e-05 Jy ! Clean residual min=-0.001351 max=0.001148 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.124195 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 127 components and 0.124195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096681Jy sigma=0.000642 ! Fit after self-cal, rms=0.096681Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8915 mas, bmaj=2.509 mas, bpa=0.7397 degrees ! Estimated noise=561.784 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8915 x 2.509 at 0.7397 degrees (North through East) ! Clean map min=-0.0011247 max=0.098893 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.688 mas, bmaj=2.025 mas, bpa=-0.1113 degrees ! Estimated noise=1045.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734344 Jy ! Component: 100 - total flux cleaned = 0.0932802 Jy ! Component: 150 - total flux cleaned = 0.103225 Jy ! Component: 200 - total flux cleaned = 0.108594 Jy ! Total flux subtracted in 200 components = 0.108594 Jy ! Clean residual min=-0.003255 max=0.002799 Jy/beam ! Clean residual mean=-0.000022 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.108594 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.108594 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8915 mas, bmaj=2.509 mas, bpa=0.7397 degrees ! Estimated noise=561.784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441158 Jy ! Component: 100 - total flux cleaned = 0.00725822 Jy ! Component: 150 - total flux cleaned = 0.00934632 Jy ! Component: 200 - total flux cleaned = 0.0109417 Jy ! Total flux subtracted in 200 components = 0.0109417 Jy ! Clean residual min=-0.001537 max=0.001472 Jy/beam ! Clean residual mean=-0.000015 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.119536 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 54 components and 0.119536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.513 mas, bmaj=6.253 mas, bpa=-2.155 degrees ! Estimated noise=699.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193876 Jy ! Component: 100 - total flux cleaned = 0.00307089 Jy ! Component: 150 - total flux cleaned = 0.00382435 Jy ! Component: 200 - total flux cleaned = 0.00410695 Jy ! Total flux subtracted in 200 components = 0.00410695 Jy ! Clean residual min=-0.001491 max=0.001106 Jy/beam ! Clean residual mean=-0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.123643 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015536 Jy ! Component: 100 - total flux cleaned = 0.000206636 Jy ! Component: 150 - total flux cleaned = 0.000236237 Jy ! Component: 200 - total flux cleaned = 0.000249791 Jy ! Total flux subtracted in 200 components = 0.000249791 Jy ! Clean residual min=-0.001437 max=0.001105 Jy/beam ! Clean residual mean=0.000000 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.123893 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 94 components and 0.123893 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8915 mas, bmaj=2.509 mas, bpa=0.7397 degrees ! Estimated noise=561.784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295134 Jy ! Component: 100 - total flux cleaned = -0.000128353 Jy ! Component: 150 - total flux cleaned = -9.74651e-06 Jy ! Component: 200 - total flux cleaned = 7.61463e-05 Jy ! Total flux subtracted in 200 components = 7.61463e-05 Jy ! Clean residual min=-0.001198 max=0.001275 Jy/beam ! Clean residual mean=0.000000 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.123969 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.123969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096698Jy sigma=0.000642 ! Fit after self-cal, rms=0.096690Jy sigma=0.000642 wmodel J1415-2809_X_2017_07_09_pus_map.mod ! Writing 109 model components to file: J1415-2809_X_2017_07_09_pus_map.mod wobs J1415-2809_X_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1415-2809_X_2017_07_09_pus_uvs.fits wwins J1415-2809_X_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J1415-2809_X_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.08312e-05 Jy ! Component: 100 - total flux cleaned = 1.1056e-05 Jy ! Component: 150 - total flux cleaned = 2.99711e-05 Jy ! Component: 200 - total flux cleaned = -6.00459e-05 Jy ! Component: 250 - total flux cleaned = -0.000146281 Jy ! Component: 300 - total flux cleaned = -0.000228881 Jy ! Component: 350 - total flux cleaned = -0.000323725 Jy ! Component: 400 - total flux cleaned = -0.000354353 Jy ! Component: 450 - total flux cleaned = -0.00044411 Jy ! Component: 500 - total flux cleaned = -0.000516881 Jy ! Component: 550 - total flux cleaned = -0.000530877 Jy ! Component: 600 - total flux cleaned = -0.000558452 Jy ! Component: 650 - total flux cleaned = -0.00057218 Jy ! Component: 700 - total flux cleaned = -0.000559487 Jy ! Component: 750 - total flux cleaned = -0.000559655 Jy ! Component: 800 - total flux cleaned = -0.000559861 Jy ! Component: 850 - total flux cleaned = -0.000547061 Jy ! Component: 900 - total flux cleaned = -0.000509698 Jy ! Component: 950 - total flux cleaned = -0.000497338 Jy ! Component: 1000 - total flux cleaned = -0.000485109 Jy ! Component: 1050 - total flux cleaned = -0.000437546 Jy ! Component: 1100 - total flux cleaned = -0.000460965 Jy ! Component: 1150 - total flux cleaned = -0.000460854 Jy ! Component: 1200 - total flux cleaned = -0.000472122 Jy ! Component: 1250 - total flux cleaned = -0.000449587 Jy ! Component: 1300 - total flux cleaned = -0.000427358 Jy ! Component: 1350 - total flux cleaned = -0.000416443 Jy ! Component: 1400 - total flux cleaned = -0.000394883 Jy ! Component: 1450 - total flux cleaned = -0.000384337 Jy ! Component: 1500 - total flux cleaned = -0.000373877 Jy ! Component: 1550 - total flux cleaned = -0.000384304 Jy ! Component: 1600 - total flux cleaned = -0.000363835 Jy ! Component: 1650 - total flux cleaned = -0.000363957 Jy ! Component: 1700 - total flux cleaned = -0.000394129 Jy ! Component: 1750 - total flux cleaned = -0.000354552 Jy ! Component: 1800 - total flux cleaned = -0.000383962 Jy ! Component: 1850 - total flux cleaned = -0.000374056 Jy ! Component: 1900 - total flux cleaned = -0.00032601 Jy ! Component: 1950 - total flux cleaned = -0.000354437 Jy ! Component: 2000 - total flux cleaned = -0.000335448 Jy ! Total flux subtracted in 2048 components = -0.000335423 Jy ! Clean residual min=-0.000507 max=0.000587 Jy/beam ! Clean residual mean=-0.000005 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.123633 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 233 components and 0.123633 Jy ![Exited script file: muppet] wmap "J1415-2809_X_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8915 x 2.509 at 0.7397 degrees (North through East) ! Clean map min=-0.00089244 max=0.09926 Jy/beam ! Writing clean map to FITS file: J1415-2809_X_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0992597 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176923 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.534728 0.534728 1.06946 2.13891 4.27782 8.55565 17.1113 34.2226 68.4452 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8915 x 2.509 at 0.7397 degrees (North through East) ! Clean map min=-0.00089244 max=0.09926 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1415-2809_X_2017_07_09_pus_uvs.log closed on Wed May 8 15:26:15 2019