! Started logfile: J1414+4554_S_2017_08_12_pus_uvs.log on Fri May 10 15:00:37 2019 obs J1414+4554_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1414+4554_S_2017_08_12_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983486 visibilities/baseline/integration-bin. ! Found source: J1414+4554 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 38592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1414+4554_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1201 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.917108Jy sigma=0.008719 ! Fit after self-cal, rms=0.890605Jy sigma=0.008481 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=4.606 mas, bpa=-9.606 degrees ! Estimated noise=901.641 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850791 Jy ! Component: 100 - total flux cleaned = 0.119541 Jy ! Total flux subtracted in 100 components = 0.119541 Jy ! Clean residual min=-0.014643 max=0.057212 Jy/beam ! Clean residual mean=-0.000010 rms=0.004412 Jy/beam ! Combined flux in latest and established models = 0.119541 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.119541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127202Jy sigma=0.001193 ! Fit after self-cal, rms=0.126561Jy sigma=0.001190 ! Inverting map ! Added new window around map position (4.5, -27). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481739 Jy ! Component: 100 - total flux cleaned = 0.0725609 Jy ! Total flux subtracted in 100 components = 0.0725609 Jy ! Clean residual min=-0.009109 max=0.014327 Jy/beam ! Clean residual mean=-0.000009 rms=0.002734 Jy/beam ! Combined flux in latest and established models = 0.192102 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.192102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104296Jy sigma=0.000953 ! Fit after self-cal, rms=0.097672Jy sigma=0.000895 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292999 Jy ! Component: 100 - total flux cleaned = 0.0468077 Jy ! Total flux subtracted in 100 components = 0.0468077 Jy ! Clean residual min=-0.006075 max=0.010421 Jy/beam ! Clean residual mean=-0.000008 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.23891 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.23891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086428Jy sigma=0.000778 ! Fit after self-cal, rms=0.085309Jy sigma=0.000769 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154741 Jy ! Component: 100 - total flux cleaned = 0.0264727 Jy ! Total flux subtracted in 100 components = 0.0264727 Jy ! Clean residual min=-0.004729 max=0.008316 Jy/beam ! Clean residual mean=-0.000008 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.265382 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.265382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081400Jy sigma=0.000727 ! Fit after self-cal, rms=0.081239Jy sigma=0.000726 ! Inverting map ! Added new window around map position (0, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010127 Jy ! Component: 100 - total flux cleaned = 0.0175648 Jy ! Total flux subtracted in 100 components = 0.0175648 Jy ! Clean residual min=-0.004381 max=0.006987 Jy/beam ! Clean residual mean=-0.000009 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.282947 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.282947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079442Jy sigma=0.000707 ! Fit after self-cal, rms=0.079373Jy sigma=0.000707 ! Inverting map ! Added new window around map position (5, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749978 Jy ! Component: 100 - total flux cleaned = 0.0128784 Jy ! Total flux subtracted in 100 components = 0.0128784 Jy ! Clean residual min=-0.003789 max=0.004725 Jy/beam ! Clean residual mean=-0.000010 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.295826 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.295826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078397Jy sigma=0.000697 ! Fit after self-cal, rms=0.078350Jy sigma=0.000696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=5.506 mas, bpa=-5.899 degrees ! Estimated noise=437.882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675101 Jy ! Component: 100 - total flux cleaned = 0.0115981 Jy ! Component: 150 - total flux cleaned = 0.015354 Jy ! Component: 200 - total flux cleaned = 0.0183664 Jy ! Total flux subtracted in 200 components = 0.0183664 Jy ! Clean residual min=-0.002591 max=0.003005 Jy/beam ! Clean residual mean=-0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.314192 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 149 components and 0.314192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077568Jy sigma=0.000688 ! Fit after self-cal, rms=0.077540Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 0.96 KP 1.05 ! LA 1.00 MK 1.03 NL 0.89 OV 0.98 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.01 KP 1.00 ! LA 0.97 MK 1.03 NL 1.06 OV 1.04 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.01 KP 0.99 ! LA 1.00 MK 1.59 NL 1.02 OV 0.95 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.99 KP 1.00* ! LA 0.99 MK 1.04 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.077540Jy sigma=0.000688 ! Fit after self-cal, rms=0.080692Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=5.609 mas, bpa=-4.754 degrees ! Estimated noise=443.649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998118 Jy ! Component: 100 - total flux cleaned = 0.0012691 Jy ! Component: 150 - total flux cleaned = 0.0015616 Jy ! Component: 200 - total flux cleaned = 0.0017178 Jy ! Total flux subtracted in 200 components = 0.0017178 Jy ! Clean residual min=-0.002006 max=0.002377 Jy/beam ! Clean residual mean=-0.000001 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.31591 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 168 components and 0.31591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080587Jy sigma=0.000678 ! Fit after self-cal, rms=0.080613Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080613Jy sigma=0.000677 ! Fit after self-cal, rms=0.085384Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=5.58 mas, bpa=-4.726 degrees ! Estimated noise=443.849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101403 Jy ! Component: 100 - total flux cleaned = 0.00142857 Jy ! Component: 150 - total flux cleaned = 0.00164871 Jy ! Component: 200 - total flux cleaned = 0.00183991 Jy ! Total flux subtracted in 200 components = 0.00183991 Jy ! Clean residual min=-0.001402 max=0.001701 Jy/beam ! Clean residual mean=-0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.31775 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 181 components and 0.31775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085323Jy sigma=0.000670 ! Fit after self-cal, rms=0.085383Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-69.5, -92). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000845191 Jy ! Component: 100 - total flux cleaned = 0.000803347 Jy ! Component: 150 - total flux cleaned = 0.000801681 Jy ! Component: 200 - total flux cleaned = 0.000832212 Jy ! Total flux subtracted in 200 components = 0.000832212 Jy ! Clean residual min=-0.001357 max=0.001306 Jy/beam ! Clean residual mean=-0.000003 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.318582 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 190 components and 0.318582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085337Jy sigma=0.000670 ! Fit after self-cal, rms=0.085338Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085338Jy sigma=0.000670 ! Fit after self-cal, rms=0.085696Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=5.564 mas, bpa=-4.415 degrees ! Estimated noise=444.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971919 Jy ! Component: 100 - total flux cleaned = 0.00131605 Jy ! Component: 150 - total flux cleaned = 0.00150017 Jy ! Component: 200 - total flux cleaned = 0.00158613 Jy ! Total flux subtracted in 200 components = 0.00158613 Jy ! Clean residual min=-0.001268 max=0.001268 Jy/beam ! Clean residual mean=-0.000003 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.320168 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 195 components and 0.320168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085667Jy sigma=0.000669 ! Fit after self-cal, rms=0.085668Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124194 Jy ! Component: 100 - total flux cleaned = 9.90753e-05 Jy ! Component: 150 - total flux cleaned = 9.95809e-05 Jy ! Component: 200 - total flux cleaned = 7.5208e-05 Jy ! Total flux subtracted in 200 components = 7.5208e-05 Jy ! Clean residual min=-0.001251 max=0.001251 Jy/beam ! Clean residual mean=-0.000003 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.320243 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 200 components and 0.320243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085652Jy sigma=0.000669 ! Fit after self-cal, rms=0.085653Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085653Jy sigma=0.000669 ! Fit after self-cal, rms=0.085859Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=9.151 mas, bpa=3.884 degrees ! Estimated noise=540.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325048 Jy ! Component: 100 - total flux cleaned = 0.000454867 Jy ! Component: 150 - total flux cleaned = 0.000472857 Jy ! Component: 200 - total flux cleaned = 0.000504166 Jy ! Total flux subtracted in 200 components = 0.000504166 Jy ! Clean residual min=-0.001230 max=0.001129 Jy/beam ! Clean residual mean=-0.000004 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.320748 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 215 components and 0.320748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085853Jy sigma=0.000669 ! Fit after self-cal, rms=0.085852Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55582e-05 Jy ! Component: 100 - total flux cleaned = -5.21932e-05 Jy ! Component: 150 - total flux cleaned = -8.92238e-05 Jy ! Component: 200 - total flux cleaned = -0.000111665 Jy ! Total flux subtracted in 200 components = -0.000111665 Jy ! Clean residual min=-0.001206 max=0.001115 Jy/beam ! Clean residual mean=-0.000004 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.320636 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 229 components and 0.320636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085849Jy sigma=0.000669 ! Fit after self-cal, rms=0.085849Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=5.551 mas, bpa=-4.291 degrees ! Estimated noise=444.881 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 5.551 at -4.291 degrees (North through East) ! Clean map min=-0.0016645 max=0.1076 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=4.632 mas, bpa=-8.063 degrees ! Estimated noise=932.809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967637 Jy ! Component: 100 - total flux cleaned = 0.151889 Jy ! Component: 150 - total flux cleaned = 0.188098 Jy ! Component: 200 - total flux cleaned = 0.213895 Jy ! Total flux subtracted in 200 components = 0.213895 Jy ! Clean residual min=-0.006752 max=0.014564 Jy/beam ! Clean residual mean=-0.000003 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.213895 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.213895 Jy ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=5.551 mas, bpa=-4.291 degrees ! Estimated noise=444.881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260767 Jy ! Component: 100 - total flux cleaned = 0.0443102 Jy ! Component: 150 - total flux cleaned = 0.0578666 Jy ! Component: 200 - total flux cleaned = 0.0681925 Jy ! Total flux subtracted in 200 components = 0.0681925 Jy ! Clean residual min=-0.002905 max=0.006007 Jy/beam ! Clean residual mean=0.000002 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.282087 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 92 components and 0.282087 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00799993 Jy ! Component: 100 - total flux cleaned = 0.0142714 Jy ! Component: 150 - total flux cleaned = 0.0192228 Jy ! Component: 200 - total flux cleaned = 0.0231783 Jy ! Total flux subtracted in 200 components = 0.0231783 Jy ! Clean residual min=-0.001725 max=0.002540 Jy/beam ! Clean residual mean=0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.305266 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 128 components and 0.305266 Jy ! Inverting map ! Added new window around map position (-3.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322776 Jy ! Component: 100 - total flux cleaned = 0.00584228 Jy ! Component: 150 - total flux cleaned = 0.00801801 Jy ! Component: 200 - total flux cleaned = 0.00983939 Jy ! Total flux subtracted in 200 components = 0.00983939 Jy ! Clean residual min=-0.001290 max=0.001330 Jy/beam ! Clean residual mean=-0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.315105 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 149 components and 0.315105 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=9.151 mas, bpa=3.884 degrees ! Estimated noise=540.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197184 Jy ! Component: 100 - total flux cleaned = 0.00296147 Jy ! Component: 150 - total flux cleaned = 0.0035441 Jy ! Component: 200 - total flux cleaned = 0.00401756 Jy ! Total flux subtracted in 200 components = 0.00401756 Jy ! Clean residual min=-0.001223 max=0.001139 Jy/beam ! Clean residual mean=-0.000003 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.319122 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391508 Jy ! Component: 100 - total flux cleaned = 0.000655224 Jy ! Component: 150 - total flux cleaned = 0.000843123 Jy ! Component: 200 - total flux cleaned = 0.000991963 Jy ! Total flux subtracted in 200 components = 0.000991963 Jy ! Clean residual min=-0.001227 max=0.001071 Jy/beam ! Clean residual mean=-0.000003 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.320114 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 201 components and 0.320114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=5.551 mas, bpa=-4.291 degrees ! Estimated noise=444.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191688 Jy ! Component: 100 - total flux cleaned = -3.9595e-05 Jy ! Component: 150 - total flux cleaned = 3.03119e-05 Jy ! Component: 200 - total flux cleaned = 6.24227e-05 Jy ! Total flux subtracted in 200 components = 6.24227e-05 Jy ! Clean residual min=-0.001250 max=0.001174 Jy/beam ! Clean residual mean=-0.000002 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.320177 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 222 components and 0.320177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085887Jy sigma=0.000669 ! Fit after self-cal, rms=0.085868Jy sigma=0.000669 wmodel J1414+4554_S_2017_08_12_pus_map.mod ! Writing 222 model components to file: J1414+4554_S_2017_08_12_pus_map.mod wobs J1414+4554_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1414+4554_S_2017_08_12_pus_uvs.fits wwins J1414+4554_S_2017_08_12_pus_map.win ! wwins: Wrote 7 windows to J1414+4554_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.81039e-05 Jy ! Component: 100 - total flux cleaned = 4.66655e-05 Jy ! Component: 150 - total flux cleaned = -3.36517e-05 Jy ! Component: 200 - total flux cleaned = -7.24757e-05 Jy ! Component: 250 - total flux cleaned = -0.000187893 Jy ! Component: 300 - total flux cleaned = -0.000281761 Jy ! Component: 350 - total flux cleaned = -0.00029999 Jy ! Component: 400 - total flux cleaned = -0.000336361 Jy ! Component: 450 - total flux cleaned = -0.000371509 Jy ! Component: 500 - total flux cleaned = -0.000405966 Jy ! Component: 550 - total flux cleaned = -0.00040576 Jy ! Component: 600 - total flux cleaned = -0.000472729 Jy ! Component: 650 - total flux cleaned = -0.000489203 Jy ! Component: 700 - total flux cleaned = -0.000538079 Jy ! Component: 750 - total flux cleaned = -0.000537906 Jy ! Component: 800 - total flux cleaned = -0.000553901 Jy ! Component: 850 - total flux cleaned = -0.000585481 Jy ! Component: 900 - total flux cleaned = -0.000631799 Jy ! Component: 950 - total flux cleaned = -0.000616496 Jy ! Component: 1000 - total flux cleaned = -0.000586522 Jy ! Component: 1050 - total flux cleaned = -0.000646176 Jy ! Component: 1100 - total flux cleaned = -0.000690191 Jy ! Component: 1150 - total flux cleaned = -0.000661138 Jy ! Component: 1200 - total flux cleaned = -0.000675667 Jy ! Component: 1250 - total flux cleaned = -0.000718291 Jy ! Component: 1300 - total flux cleaned = -0.00078866 Jy ! Component: 1350 - total flux cleaned = -0.000760699 Jy ! Component: 1400 - total flux cleaned = -0.000774434 Jy ! Component: 1450 - total flux cleaned = -0.000815436 Jy ! Component: 1500 - total flux cleaned = -0.000801682 Jy ! Component: 1550 - total flux cleaned = -0.000788388 Jy ! Component: 1600 - total flux cleaned = -0.000801654 Jy ! Component: 1650 - total flux cleaned = -0.000788641 Jy ! Component: 1700 - total flux cleaned = -0.000775806 Jy ! Component: 1750 - total flux cleaned = -0.000775833 Jy ! Component: 1800 - total flux cleaned = -0.000788843 Jy ! Component: 1850 - total flux cleaned = -0.00082711 Jy ! Component: 1900 - total flux cleaned = -0.00086482 Jy ! Component: 1950 - total flux cleaned = -0.000802268 Jy ! Component: 2000 - total flux cleaned = -0.00083971 Jy ! Component: 2050 - total flux cleaned = -0.00091361 Jy ! Component: 2100 - total flux cleaned = -0.000950298 Jy ! Component: 2150 - total flux cleaned = -0.000938141 Jy ! Component: 2200 - total flux cleaned = -0.000950279 Jy ! Component: 2250 - total flux cleaned = -0.000950102 Jy ! Component: 2300 - total flux cleaned = -0.000950089 Jy ! Component: 2350 - total flux cleaned = -0.000950015 Jy ! Component: 2400 - total flux cleaned = -0.000985206 Jy ! Component: 2450 - total flux cleaned = -0.000996766 Jy ! Component: 2500 - total flux cleaned = -0.000996646 Jy ! Component: 2550 - total flux cleaned = -0.000985141 Jy ! Component: 2600 - total flux cleaned = -0.000985213 Jy ! Component: 2650 - total flux cleaned = -0.00101919 Jy ! Component: 2700 - total flux cleaned = -0.00103032 Jy ! Component: 2750 - total flux cleaned = -0.000974481 Jy ! Component: 2800 - total flux cleaned = -0.000963399 Jy ! Component: 2850 - total flux cleaned = -0.00102939 Jy ! Component: 2900 - total flux cleaned = -0.000985556 Jy ! Component: 2950 - total flux cleaned = -0.000985601 Jy ! Component: 3000 - total flux cleaned = -0.000964047 Jy ! Component: 3050 - total flux cleaned = -0.000953357 Jy ! Component: 3100 - total flux cleaned = -0.000964116 Jy ! Component: 3150 - total flux cleaned = -0.000932218 Jy ! Component: 3200 - total flux cleaned = -0.000900745 Jy ! Component: 3250 - total flux cleaned = -0.000890339 Jy ! Component: 3300 - total flux cleaned = -0.000911337 Jy ! Component: 3350 - total flux cleaned = -0.000890604 Jy ! Component: 3400 - total flux cleaned = -0.000890663 Jy ! Component: 3450 - total flux cleaned = -0.000859988 Jy ! Component: 3500 - total flux cleaned = -0.000839704 Jy ! Component: 3550 - total flux cleaned = -0.000880172 Jy ! Component: 3600 - total flux cleaned = -0.000839925 Jy ! Component: 3650 - total flux cleaned = -0.000829836 Jy ! Component: 3700 - total flux cleaned = -0.000829741 Jy ! Component: 3750 - total flux cleaned = -0.000829855 Jy ! Component: 3800 - total flux cleaned = -0.000839656 Jy ! Component: 3850 - total flux cleaned = -0.000790817 Jy ! Component: 3900 - total flux cleaned = -0.00081036 Jy ! Component: 3950 - total flux cleaned = -0.000771578 Jy ! Component: 4000 - total flux cleaned = -0.000761921 Jy ! Component: 4050 - total flux cleaned = -0.000771558 Jy ! Total flux subtracted in 4096 components = -0.000828707 Jy ! Clean residual min=-0.000563 max=0.000476 Jy/beam ! Clean residual mean=0.000000 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.319348 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 517 components and 0.319348 Jy ![Exited script file: muppet] wmap "J1414+4554_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 5.551 at -4.291 degrees (North through East) ! Clean map min=-0.0010364 max=0.10755 Jy/beam ! Writing clean map to FITS file: J1414+4554_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172302 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.480626 0.480626 0.961253 1.92251 3.84501 7.69002 15.38 30.7601 61.5202 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 5.551 at -4.291 degrees (North through East) ! Clean map min=-0.0010364 max=0.10755 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1414+4554_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:00:43 2019