! Started logfile: J1410-1903_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:55 2019 obs J1410-1903_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1410-1903_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.742284 visibilities/baseline/integration-bin. ! Found source: J1410-1903 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1410-1903_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 774 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970146Jy sigma=0.007005 ! Fit after self-cal, rms=0.931242Jy sigma=0.006756 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=13.8 mas, bpa=-15.86 degrees ! Estimated noise=1766.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569295 Jy ! Component: 100 - total flux cleaned = 0.0700367 Jy ! Total flux subtracted in 100 components = 0.0700367 Jy ! Clean residual min=-0.004447 max=0.005048 Jy/beam ! Clean residual mean=-0.000014 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.0700367 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0700367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098319Jy sigma=0.000643 ! Fit after self-cal, rms=0.097832Jy sigma=0.000641 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=15.87 mas, bpa=-14.27 degrees ! Estimated noise=949.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069742 Jy ! Component: 100 - total flux cleaned = 0.010801 Jy ! Component: 150 - total flux cleaned = 0.0129504 Jy ! Component: 200 - total flux cleaned = 0.0137788 Jy ! Total flux subtracted in 200 components = 0.0137788 Jy ! Clean residual min=-0.003015 max=0.003046 Jy/beam ! Clean residual mean=-0.000002 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0838155 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 0.0838154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097325Jy sigma=0.000637 ! Fit after self-cal, rms=0.097301Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 0.97 KP 1.07 ! LA 1.01 MK 1.06 NL 0.95 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00 HN 1.09 KP 0.97 ! LA 0.99 MK 1.03 NL 0.98 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.02 KP 0.97 ! LA 0.83 MK 0.94 NL 1.14 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.89 KP 1.00* ! LA 1.00* MK 0.90 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.097301Jy sigma=0.000637 ! Fit after self-cal, rms=0.095671Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=15.9 mas, bpa=-14.43 degrees ! Estimated noise=952.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000382498 Jy ! Component: 100 - total flux cleaned = -0.000531442 Jy ! Component: 150 - total flux cleaned = -0.000562488 Jy ! Component: 200 - total flux cleaned = -0.000562715 Jy ! Total flux subtracted in 200 components = -0.000562715 Jy ! Clean residual min=-0.002983 max=0.002737 Jy/beam ! Clean residual mean=-0.000000 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0832527 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.0832527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095642Jy sigma=0.000636 ! Fit after self-cal, rms=0.095584Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095584Jy sigma=0.000635 ! Fit after self-cal, rms=0.097333Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=16.26 mas, bpa=-14.56 degrees ! Estimated noise=957.343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000329766 Jy ! Component: 100 - total flux cleaned = -0.000450911 Jy ! Component: 150 - total flux cleaned = -0.000504146 Jy ! Component: 200 - total flux cleaned = -0.000537608 Jy ! Total flux subtracted in 200 components = -0.000537608 Jy ! Clean residual min=-0.002382 max=0.001969 Jy/beam ! Clean residual mean=-0.000002 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0827151 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.0827151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097324Jy sigma=0.000634 ! Fit after self-cal, rms=0.097382Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.33535e-06 Jy ! Component: 100 - total flux cleaned = -4.41857e-05 Jy ! Component: 150 - total flux cleaned = -7.17294e-05 Jy ! Component: 200 - total flux cleaned = -9.75057e-05 Jy ! Total flux subtracted in 200 components = -9.75057e-05 Jy ! Clean residual min=-0.002369 max=0.001960 Jy/beam ! Clean residual mean=-0.000001 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0826176 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.0826176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097376Jy sigma=0.000634 ! Fit after self-cal, rms=0.097377Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097377Jy sigma=0.000634 ! Fit after self-cal, rms=0.097897Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=16.35 mas, bpa=-14.55 degrees ! Estimated noise=956.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350738 Jy ! Component: 100 - total flux cleaned = -0.000452846 Jy ! Component: 150 - total flux cleaned = -0.000483527 Jy ! Component: 200 - total flux cleaned = -0.000511194 Jy ! Total flux subtracted in 200 components = -0.000511194 Jy ! Clean residual min=-0.002343 max=0.001982 Jy/beam ! Clean residual mean=-0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0821064 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.0821064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097890Jy sigma=0.000634 ! Fit after self-cal, rms=0.097903Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.36354e-05 Jy ! Component: 100 - total flux cleaned = -4.23583e-05 Jy ! Component: 150 - total flux cleaned = -6.87084e-05 Jy ! Component: 200 - total flux cleaned = -8.09539e-05 Jy ! Total flux subtracted in 200 components = -8.09539e-05 Jy ! Clean residual min=-0.002341 max=0.001963 Jy/beam ! Clean residual mean=-0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0820255 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.0820255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097898Jy sigma=0.000633 ! Fit after self-cal, rms=0.097894Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097894Jy sigma=0.000633 ! Fit after self-cal, rms=0.098029Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.273 mas, bmaj=20.26 mas, bpa=-6.584 degrees ! Estimated noise=1122.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130349 Jy ! Component: 100 - total flux cleaned = -0.000242345 Jy ! Component: 150 - total flux cleaned = -0.000321933 Jy ! Component: 200 - total flux cleaned = -0.000404053 Jy ! Total flux subtracted in 200 components = -0.000404053 Jy ! Clean residual min=-0.002980 max=0.002000 Jy/beam ! Clean residual mean=-0.000005 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0816214 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.0816214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098029Jy sigma=0.000633 ! Fit after self-cal, rms=0.098039Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.91959e-05 Jy ! Component: 100 - total flux cleaned = -4.50996e-05 Jy ! Component: 150 - total flux cleaned = -0.000106171 Jy ! Component: 200 - total flux cleaned = -0.000128381 Jy ! Total flux subtracted in 200 components = -0.000128381 Jy ! Clean residual min=-0.002972 max=0.002015 Jy/beam ! Clean residual mean=-0.000005 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.081493 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.081493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098040Jy sigma=0.000633 ! Fit after self-cal, rms=0.098039Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=16.39 mas, bpa=-14.53 degrees ! Estimated noise=955.646 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 16.39 at -14.53 degrees (North through East) ! Clean map min=-0.0022483 max=0.072051 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=14.02 mas, bpa=-16.08 degrees ! Estimated noise=1474.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565807 Jy ! Component: 100 - total flux cleaned = 0.0698555 Jy ! Component: 150 - total flux cleaned = 0.0755066 Jy ! Component: 200 - total flux cleaned = 0.0788924 Jy ! Total flux subtracted in 200 components = 0.0788924 Jy ! Clean residual min=-0.003400 max=0.003898 Jy/beam ! Clean residual mean=-0.000003 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0788924 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0788924 Jy ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=16.39 mas, bpa=-14.53 degrees ! Estimated noise=955.646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173592 Jy ! Component: 100 - total flux cleaned = 0.0018076 Jy ! Component: 150 - total flux cleaned = 0.0019123 Jy ! Component: 200 - total flux cleaned = 0.00199939 Jy ! Total flux subtracted in 200 components = 0.00199939 Jy ! Clean residual min=-0.002279 max=0.002052 Jy/beam ! Clean residual mean=-0.000003 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0808918 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0808918 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.273 mas, bmaj=20.26 mas, bpa=-6.584 degrees ! Estimated noise=1122.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635443 Jy ! Component: 100 - total flux cleaned = 0.000700621 Jy ! Component: 150 - total flux cleaned = 0.000785017 Jy ! Component: 200 - total flux cleaned = 0.000830853 Jy ! Total flux subtracted in 200 components = 0.000830853 Jy ! Clean residual min=-0.003056 max=0.002259 Jy/beam ! Clean residual mean=-0.000005 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0817227 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.97417e-05 Jy ! Component: 100 - total flux cleaned = 2.35705e-06 Jy ! Component: 150 - total flux cleaned = -3.10654e-05 Jy ! Component: 200 - total flux cleaned = -4.66588e-05 Jy ! Total flux subtracted in 200 components = -4.66588e-05 Jy ! Clean residual min=-0.003051 max=0.002228 Jy/beam ! Clean residual mean=-0.000005 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.081676 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.081676 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=16.39 mas, bpa=-14.53 degrees ! Estimated noise=955.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150501 Jy ! Component: 100 - total flux cleaned = 5.83137e-05 Jy ! Component: 150 - total flux cleaned = -4.87438e-05 Jy ! Component: 200 - total flux cleaned = -0.000143885 Jy ! Total flux subtracted in 200 components = -0.000143885 Jy ! Clean residual min=-0.002353 max=0.001940 Jy/beam ! Clean residual mean=-0.000002 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0815321 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.0815322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098043Jy sigma=0.000633 ! Fit after self-cal, rms=0.098008Jy sigma=0.000633 wmodel J1410-1903_S_2017_10_09_pus_map.mod ! Writing 65 model components to file: J1410-1903_S_2017_10_09_pus_map.mod wobs J1410-1903_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1410-1903_S_2017_10_09_pus_uvs.fits wwins J1410-1903_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1410-1903_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000775247 Jy ! Component: 100 - total flux cleaned = -0.000739666 Jy ! Component: 150 - total flux cleaned = -0.000931145 Jy ! Component: 200 - total flux cleaned = -0.000991535 Jy ! Component: 250 - total flux cleaned = -0.000905055 Jy ! Component: 300 - total flux cleaned = -0.000767655 Jy ! Component: 350 - total flux cleaned = -0.000635645 Jy ! Component: 400 - total flux cleaned = -0.00050777 Jy ! Component: 450 - total flux cleaned = -0.00038441 Jy ! Component: 500 - total flux cleaned = -0.000265024 Jy ! Component: 550 - total flux cleaned = -0.000195833 Jy ! Component: 600 - total flux cleaned = -0.000105799 Jy ! Component: 650 - total flux cleaned = 3.11585e-06 Jy ! Component: 700 - total flux cleaned = 6.56575e-05 Jy ! Component: 750 - total flux cleaned = 6.52571e-05 Jy ! Component: 800 - total flux cleaned = 4.53787e-05 Jy ! Component: 850 - total flux cleaned = 6.54814e-05 Jy ! Component: 900 - total flux cleaned = 8.48111e-05 Jy ! Component: 950 - total flux cleaned = 0.000141017 Jy ! Component: 1000 - total flux cleaned = 0.00012328 Jy ! Component: 1050 - total flux cleaned = 0.000159619 Jy ! Component: 1100 - total flux cleaned = 0.000194353 Jy ! Component: 1150 - total flux cleaned = 0.000142949 Jy ! Component: 1200 - total flux cleaned = 0.000193872 Jy ! Component: 1250 - total flux cleaned = 0.000276888 Jy ! Component: 1300 - total flux cleaned = 0.000308955 Jy ! Component: 1350 - total flux cleaned = 0.000340661 Jy ! Component: 1400 - total flux cleaned = 0.00034081 Jy ! Component: 1450 - total flux cleaned = 0.000387712 Jy ! Component: 1500 - total flux cleaned = 0.000433589 Jy ! Component: 1550 - total flux cleaned = 0.000448561 Jy ! Component: 1600 - total flux cleaned = 0.000448858 Jy ! Component: 1650 - total flux cleaned = 0.000478146 Jy ! Component: 1700 - total flux cleaned = 0.000492576 Jy ! Component: 1750 - total flux cleaned = 0.00052096 Jy ! Component: 1800 - total flux cleaned = 0.000506911 Jy ! Component: 1850 - total flux cleaned = 0.000548137 Jy ! Component: 1900 - total flux cleaned = 0.000547886 Jy ! Component: 1950 - total flux cleaned = 0.000521249 Jy ! Component: 2000 - total flux cleaned = 0.000534489 Jy ! Component: 2050 - total flux cleaned = 0.000495224 Jy ! Component: 2100 - total flux cleaned = 0.000533922 Jy ! Component: 2150 - total flux cleaned = 0.00053374 Jy ! Component: 2200 - total flux cleaned = 0.000520912 Jy ! Component: 2250 - total flux cleaned = 0.000470902 Jy ! Component: 2300 - total flux cleaned = 0.00043377 Jy ! Component: 2350 - total flux cleaned = 0.000445929 Jy ! Component: 2400 - total flux cleaned = 0.000421658 Jy ! Component: 2450 - total flux cleaned = 0.000433572 Jy ! Component: 2500 - total flux cleaned = 0.000421504 Jy ! Component: 2550 - total flux cleaned = 0.000433266 Jy ! Component: 2600 - total flux cleaned = 0.00042147 Jy ! Component: 2650 - total flux cleaned = 0.00038666 Jy ! Component: 2700 - total flux cleaned = 0.000386681 Jy ! Component: 2750 - total flux cleaned = 0.000386683 Jy ! Component: 2800 - total flux cleaned = 0.000375618 Jy ! Component: 2850 - total flux cleaned = 0.000386794 Jy ! Component: 2900 - total flux cleaned = 0.000364831 Jy ! Component: 2950 - total flux cleaned = 0.000375792 Jy ! Component: 3000 - total flux cleaned = 0.000386695 Jy ! Component: 3050 - total flux cleaned = 0.000354407 Jy ! Component: 3100 - total flux cleaned = 0.000332964 Jy ! Component: 3150 - total flux cleaned = 0.000311645 Jy ! Component: 3200 - total flux cleaned = 0.00026946 Jy ! Component: 3250 - total flux cleaned = 0.000279908 Jy ! Component: 3300 - total flux cleaned = 0.000248809 Jy ! Component: 3350 - total flux cleaned = 0.000259194 Jy ! Component: 3400 - total flux cleaned = 0.000238716 Jy ! Component: 3450 - total flux cleaned = 0.000248867 Jy ! Component: 3500 - total flux cleaned = 0.000218569 Jy ! Component: 3550 - total flux cleaned = 0.000218582 Jy ! Component: 3600 - total flux cleaned = 0.000208608 Jy ! Component: 3650 - total flux cleaned = 0.000208544 Jy ! Component: 3700 - total flux cleaned = 0.00013949 Jy ! Component: 3750 - total flux cleaned = 0.000129726 Jy ! Component: 3800 - total flux cleaned = 0.000100408 Jy ! Component: 3850 - total flux cleaned = 0.000100484 Jy ! Component: 3900 - total flux cleaned = 0.000119847 Jy ! Component: 3950 - total flux cleaned = 7.16106e-05 Jy ! Component: 4000 - total flux cleaned = 5.25095e-05 Jy ! Component: 4050 - total flux cleaned = 5.24778e-05 Jy ! Total flux subtracted in 4096 components = 2.39345e-05 Jy ! Clean residual min=-0.000679 max=0.000547 Jy/beam ! Clean residual mean=-0.000000 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0815561 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 329 components and 0.0815561 Jy ![Exited script file: muppet] wmap "J1410-1903_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 16.39 at -14.53 degrees (North through East) ! Clean map min=-0.0015657 max=0.072957 Jy/beam ! Writing clean map to FITS file: J1410-1903_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0729568 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161149 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.662647 0.662647 1.32529 2.65059 5.30117 10.6023 21.2047 42.4094 84.8188 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 16.39 at -14.53 degrees (North through East) ! Clean map min=-0.0015657 max=0.072957 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1410-1903_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:14:01 2019