! Started logfile: J1410-1903_S_2017_05_01_pus_uvs.log on Wed May 1 18:38:20 2019 obs J1410-1903_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1410-1903_S_2017_05_01_pus_uva.fits ! AN table 1: 149 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789113 visibilities/baseline/integration-bin. ! Found source: J1410-1903 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 21164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1410-1903_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 873 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951565Jy sigma=0.022187 ! Fit after self-cal, rms=0.920144Jy sigma=0.022115 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.392 mas, bpa=1.339 degrees ! Estimated noise=769.621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458195 Jy ! Component: 100 - total flux cleaned = 0.0557852 Jy ! Total flux subtracted in 100 components = 0.0557852 Jy ! Clean residual min=-0.018372 max=0.020501 Jy/beam ! Clean residual mean=0.000019 rms=0.006851 Jy/beam ! Combined flux in latest and established models = 0.0557852 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0557852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110718Jy sigma=0.001262 ! Fit after self-cal, rms=0.110602Jy sigma=0.001247 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=8.386 mas, bpa=2.994 degrees ! Estimated noise=645.566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119862 Jy ! Component: 100 - total flux cleaned = 0.011986 Jy ! Component: 150 - total flux cleaned = 0.0121725 Jy ! Component: 200 - total flux cleaned = 0.01201 Jy ! Total flux subtracted in 200 components = 0.01201 Jy ! Clean residual min=-0.014961 max=0.015562 Jy/beam ! Clean residual mean=0.000011 rms=0.005650 Jy/beam ! Combined flux in latest and established models = 0.0677952 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.0677952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107198Jy sigma=0.001424 ! Fit after self-cal, rms=0.107165Jy sigma=0.001424 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.98 HN 0.96 KP 0.83 ! LA 0.80 MK 1.10 NL 0.84 OV 0.86 ! PT 0.83 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 1.03 HN 0.94 KP 0.85 ! LA 0.78 MK 1.04 NL 0.88 OV 0.95 ! PT 0.84 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 1.05 HN 0.89 KP 0.85 ! LA 0.86 MK 1.03 NL 0.92 OV 0.82 ! PT 0.81 SC 0.97 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 1.08 HN 1.08 KP 1.00* ! LA 26.36 MK 0.89 NL 1.00* OV 1.00* ! PT 0.72 SC 1.00* ! ! ! Fit before self-cal, rms=0.107165Jy sigma=0.001424 ! Fit after self-cal, rms=0.084395Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=7.864 mas, bpa=3.474 degrees ! Estimated noise=638.597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133649 Jy ! Component: 100 - total flux cleaned = 9.06971e-05 Jy ! Component: 150 - total flux cleaned = 9.2634e-05 Jy ! Component: 200 - total flux cleaned = 9.3256e-05 Jy ! Total flux subtracted in 200 components = 9.3256e-05 Jy ! Clean residual min=-0.003416 max=0.004187 Jy/beam ! Clean residual mean=0.000013 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.0678885 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0678885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084353Jy sigma=0.000665 ! Fit after self-cal, rms=0.084181Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084181Jy sigma=0.000663 ! Fit after self-cal, rms=0.087949Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=7.914 mas, bpa=3.392 degrees ! Estimated noise=637.181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.0619e-05 Jy ! Component: 100 - total flux cleaned = 1.05144e-05 Jy ! Component: 150 - total flux cleaned = -2.76754e-05 Jy ! Component: 200 - total flux cleaned = -5.65591e-05 Jy ! Total flux subtracted in 200 components = -5.65591e-05 Jy ! Clean residual min=-0.001865 max=0.001841 Jy/beam ! Clean residual mean=0.000002 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0678319 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.0678319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087912Jy sigma=0.000656 ! Fit after self-cal, rms=0.088193Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000280177 Jy ! Component: 100 - total flux cleaned = -0.000281225 Jy ! Component: 150 - total flux cleaned = -0.00030605 Jy ! Component: 200 - total flux cleaned = -0.000305535 Jy ! Total flux subtracted in 200 components = -0.000305535 Jy ! Clean residual min=-0.001739 max=0.001923 Jy/beam ! Clean residual mean=0.000003 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0675264 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0675264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088176Jy sigma=0.000655 ! Fit after self-cal, rms=0.088183Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088183Jy sigma=0.000655 ! Fit after self-cal, rms=0.090477Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=7.853 mas, bpa=3.049 degrees ! Estimated noise=636.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.41829e-07 Jy ! Component: 100 - total flux cleaned = -3.44075e-05 Jy ! Component: 150 - total flux cleaned = -6.15011e-05 Jy ! Component: 200 - total flux cleaned = -6.17671e-05 Jy ! Total flux subtracted in 200 components = -6.17671e-05 Jy ! Clean residual min=-0.001638 max=0.001812 Jy/beam ! Clean residual mean=0.000001 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0674646 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0674646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090459Jy sigma=0.000654 ! Fit after self-cal, rms=0.090523Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.53604e-05 Jy ! Component: 100 - total flux cleaned = -8.48858e-05 Jy ! Component: 150 - total flux cleaned = -8.47739e-05 Jy ! Component: 200 - total flux cleaned = -8.45596e-05 Jy ! Total flux subtracted in 200 components = -8.45596e-05 Jy ! Clean residual min=-0.001626 max=0.001806 Jy/beam ! Clean residual mean=0.000001 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.06738 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.06738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090516Jy sigma=0.000654 ! Fit after self-cal, rms=0.090517Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090517Jy sigma=0.000654 ! Fit after self-cal, rms=0.091062Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.661 mas, bmaj=16.13 mas, bpa=6.002 degrees ! Estimated noise=748.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467283 Jy ! Component: 100 - total flux cleaned = 0.000497887 Jy ! Component: 150 - total flux cleaned = 0.000518162 Jy ! Component: 200 - total flux cleaned = 0.000523602 Jy ! Total flux subtracted in 200 components = 0.000523602 Jy ! Clean residual min=-0.001756 max=0.001708 Jy/beam ! Clean residual mean=0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0679036 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.0679036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091060Jy sigma=0.000654 ! Fit after self-cal, rms=0.091065Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29799e-05 Jy ! Component: 100 - total flux cleaned = 2.39125e-05 Jy ! Component: 150 - total flux cleaned = 3.03946e-05 Jy ! Component: 200 - total flux cleaned = 3.57241e-05 Jy ! Total flux subtracted in 200 components = 3.57241e-05 Jy ! Clean residual min=-0.001760 max=0.001700 Jy/beam ! Clean residual mean=0.000002 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0679394 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.0679393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091064Jy sigma=0.000654 ! Fit after self-cal, rms=0.091063Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=7.801 mas, bpa=2.806 degrees ! Estimated noise=636.397 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 7.801 at 2.806 degrees (North through East) ! Clean map min=-0.0015957 max=0.06649 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=6.476 mas, bpa=0.6229 degrees ! Estimated noise=879.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529148 Jy ! Component: 100 - total flux cleaned = 0.0644665 Jy ! Component: 150 - total flux cleaned = 0.0668557 Jy ! Component: 200 - total flux cleaned = 0.0668649 Jy ! Total flux subtracted in 200 components = 0.0668649 Jy ! Clean residual min=-0.002105 max=0.002524 Jy/beam ! Clean residual mean=-0.000000 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0668649 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0668649 Jy ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=7.801 mas, bpa=2.806 degrees ! Estimated noise=636.397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337518 Jy ! Component: 100 - total flux cleaned = 0.000279773 Jy ! Component: 150 - total flux cleaned = 0.00022928 Jy ! Component: 200 - total flux cleaned = 0.000184008 Jy ! Total flux subtracted in 200 components = 0.000184008 Jy ! Clean residual min=-0.001716 max=0.001814 Jy/beam ! Clean residual mean=0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0670489 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0670489 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.661 mas, bmaj=16.13 mas, bpa=6.002 degrees ! Estimated noise=748.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478376 Jy ! Component: 100 - total flux cleaned = 0.000513305 Jy ! Component: 150 - total flux cleaned = 0.000543748 Jy ! Component: 200 - total flux cleaned = 0.000557136 Jy ! Total flux subtracted in 200 components = 0.000557136 Jy ! Clean residual min=-0.001813 max=0.001746 Jy/beam ! Clean residual mean=0.000002 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0676061 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.42128e-05 Jy ! Component: 100 - total flux cleaned = 4.53893e-05 Jy ! Component: 150 - total flux cleaned = 5.50075e-05 Jy ! Component: 200 - total flux cleaned = 7.25206e-05 Jy ! Total flux subtracted in 200 components = 7.25206e-05 Jy ! Clean residual min=-0.001796 max=0.001724 Jy/beam ! Clean residual mean=0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0676786 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0676786 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=7.801 mas, bpa=2.806 degrees ! Estimated noise=636.397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000399481 Jy ! Component: 100 - total flux cleaned = -0.000419028 Jy ! Component: 150 - total flux cleaned = -0.000455112 Jy ! Component: 200 - total flux cleaned = -0.000471531 Jy ! Total flux subtracted in 200 components = -0.000471531 Jy ! Clean residual min=-0.001657 max=0.001814 Jy/beam ! Clean residual mean=0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0672071 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0672071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091062Jy sigma=0.000654 ! Fit after self-cal, rms=0.091071Jy sigma=0.000654 wmodel J1410-1903_S_2017_05_01_pus_map.mod ! Writing 40 model components to file: J1410-1903_S_2017_05_01_pus_map.mod wobs J1410-1903_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1410-1903_S_2017_05_01_pus_uvs.fits wwins J1410-1903_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1410-1903_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608994 Jy ! Component: 100 - total flux cleaned = 0.00078147 Jy ! Component: 150 - total flux cleaned = 0.000944235 Jy ! Component: 200 - total flux cleaned = 0.000996278 Jy ! Component: 250 - total flux cleaned = 0.000920325 Jy ! Component: 300 - total flux cleaned = 0.000871116 Jy ! Component: 350 - total flux cleaned = 0.000705491 Jy ! Component: 400 - total flux cleaned = 0.000590757 Jy ! Component: 450 - total flux cleaned = 0.000456113 Jy ! Component: 500 - total flux cleaned = 0.00034679 Jy ! Component: 550 - total flux cleaned = 0.000325684 Jy ! Component: 600 - total flux cleaned = 0.000221351 Jy ! Component: 650 - total flux cleaned = 0.000160156 Jy ! Component: 700 - total flux cleaned = 6.04338e-05 Jy ! Component: 750 - total flux cleaned = 2.15396e-05 Jy ! Component: 800 - total flux cleaned = -7.46901e-05 Jy ! Component: 850 - total flux cleaned = -0.000131751 Jy ! Component: 900 - total flux cleaned = -0.000280372 Jy ! Component: 950 - total flux cleaned = -0.000371193 Jy ! Component: 1000 - total flux cleaned = -0.000424922 Jy ! Component: 1050 - total flux cleaned = -0.000495797 Jy ! Component: 1100 - total flux cleaned = -0.000548686 Jy ! Component: 1150 - total flux cleaned = -0.000600244 Jy ! Component: 1200 - total flux cleaned = -0.000734762 Jy ! Component: 1250 - total flux cleaned = -0.00075151 Jy ! Component: 1300 - total flux cleaned = -0.000816812 Jy ! Component: 1350 - total flux cleaned = -0.000849092 Jy ! Component: 1400 - total flux cleaned = -0.000881045 Jy ! Component: 1450 - total flux cleaned = -0.000865692 Jy ! Component: 1500 - total flux cleaned = -0.000881274 Jy ! Component: 1550 - total flux cleaned = -0.000927189 Jy ! Component: 1600 - total flux cleaned = -0.0009572 Jy ! Component: 1650 - total flux cleaned = -0.000912397 Jy ! Component: 1700 - total flux cleaned = -0.000926987 Jy ! Component: 1750 - total flux cleaned = -0.000883681 Jy ! Component: 1800 - total flux cleaned = -0.000926549 Jy ! Component: 1850 - total flux cleaned = -0.000926397 Jy ! Component: 1900 - total flux cleaned = -0.000926325 Jy ! Component: 1950 - total flux cleaned = -0.000981308 Jy ! Component: 2000 - total flux cleaned = -0.000940283 Jy ! Component: 2050 - total flux cleaned = -0.000900056 Jy ! Component: 2100 - total flux cleaned = -0.000860139 Jy ! Component: 2150 - total flux cleaned = -0.000886557 Jy ! Component: 2200 - total flux cleaned = -0.000860442 Jy ! Component: 2250 - total flux cleaned = -0.000886213 Jy ! Component: 2300 - total flux cleaned = -0.000847584 Jy ! Component: 2350 - total flux cleaned = -0.000834663 Jy ! Component: 2400 - total flux cleaned = -0.000822044 Jy ! Component: 2450 - total flux cleaned = -0.000809626 Jy ! Component: 2500 - total flux cleaned = -0.000760282 Jy ! Component: 2550 - total flux cleaned = -0.000735783 Jy ! Component: 2600 - total flux cleaned = -0.000735759 Jy ! Component: 2650 - total flux cleaned = -0.000747784 Jy ! Component: 2700 - total flux cleaned = -0.000747821 Jy ! Component: 2750 - total flux cleaned = -0.000748053 Jy ! Component: 2800 - total flux cleaned = -0.000736416 Jy ! Component: 2850 - total flux cleaned = -0.000748093 Jy ! Component: 2900 - total flux cleaned = -0.000748134 Jy ! Component: 2950 - total flux cleaned = -0.000748061 Jy ! Component: 3000 - total flux cleaned = -0.000759426 Jy ! Component: 3050 - total flux cleaned = -0.000781959 Jy ! Component: 3100 - total flux cleaned = -0.000826268 Jy ! Component: 3150 - total flux cleaned = -0.000848203 Jy ! Component: 3200 - total flux cleaned = -0.000848191 Jy ! Component: 3250 - total flux cleaned = -0.000858974 Jy ! Component: 3300 - total flux cleaned = -0.000913028 Jy ! Component: 3350 - total flux cleaned = -0.000934386 Jy ! Component: 3400 - total flux cleaned = -0.000881158 Jy ! Component: 3450 - total flux cleaned = -0.000944729 Jy ! Component: 3500 - total flux cleaned = -0.000976244 Jy ! Component: 3550 - total flux cleaned = -0.000976225 Jy ! Component: 3600 - total flux cleaned = -0.00102804 Jy ! Component: 3650 - total flux cleaned = -0.00102804 Jy ! Component: 3700 - total flux cleaned = -0.00104844 Jy ! Component: 3750 - total flux cleaned = -0.00107879 Jy ! Component: 3800 - total flux cleaned = -0.00107875 Jy ! Component: 3850 - total flux cleaned = -0.00109883 Jy ! Component: 3900 - total flux cleaned = -0.00108886 Jy ! Component: 3950 - total flux cleaned = -0.00112843 Jy ! Component: 4000 - total flux cleaned = -0.00113826 Jy ! Component: 4050 - total flux cleaned = -0.00113836 Jy ! Total flux subtracted in 4096 components = -0.00118691 Jy ! Clean residual min=-0.000545 max=0.000566 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0660202 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 307 components and 0.0660202 Jy ![Exited script file: muppet] wmap "J1410-1903_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 7.801 at 2.806 degrees (North through East) ! Clean map min=-0.0012355 max=0.067045 Jy/beam ! Writing clean map to FITS file: J1410-1903_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0670449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171875 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.769075 0.769075 1.53815 3.0763 6.1526 12.3052 24.6104 49.2208 98.4416 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 7.801 at 2.806 degrees (North through East) ! Clean map min=-0.0012355 max=0.067045 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1410-1903_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:38:25 2019