! Started logfile: J1408-0752_S_2017_08_12_pus_uvs.log on Fri May 10 15:00:34 2019 obs J1408-0752_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1408-0752_S_2017_08_12_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.306667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1408-0752 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1408-0752_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.164146Jy sigma=0.009787 ! Fit after self-cal, rms=0.515801Jy sigma=0.004376 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=29.26 mas, bpa=-17.12 degrees ! Estimated noise=5800.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.382512 Jy ! Component: 100 - total flux cleaned = 0.480755 Jy ! Total flux subtracted in 100 components = 0.480755 Jy ! Clean residual min=-0.037021 max=0.045066 Jy/beam ! Clean residual mean=0.000284 rms=0.015486 Jy/beam ! Combined flux in latest and established models = 0.480755 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.480755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127200Jy sigma=0.001044 ! Fit after self-cal, rms=0.127029Jy sigma=0.001041 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=28.58 mas, bpa=-17.15 degrees ! Estimated noise=4865.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606328 Jy ! Component: 100 - total flux cleaned = 0.0967475 Jy ! Component: 150 - total flux cleaned = 0.116757 Jy ! Component: 200 - total flux cleaned = 0.130625 Jy ! Total flux subtracted in 200 components = 0.130625 Jy ! Clean residual min=-0.011614 max=0.011632 Jy/beam ! Clean residual mean=0.000032 rms=0.005338 Jy/beam ! Combined flux in latest and established models = 0.61138 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 113 components and 0.61138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085919Jy sigma=0.000705 ! Fit after self-cal, rms=0.085568Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 0.94 MK 1.02 NL 1.06 OV 1.09 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.98 MK 1.03 NL 0.96 OV 0.95 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.085568Jy sigma=0.000702 ! Fit after self-cal, rms=0.079754Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=28.82 mas, bpa=-16.79 degrees ! Estimated noise=5055.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00912189 Jy ! Component: 100 - total flux cleaned = 0.00968473 Jy ! Component: 150 - total flux cleaned = 0.00878075 Jy ! Component: 200 - total flux cleaned = 0.00743318 Jy ! Total flux subtracted in 200 components = 0.00743318 Jy ! Clean residual min=-0.002977 max=0.002972 Jy/beam ! Clean residual mean=0.000006 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.618813 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 175 components and 0.618813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076991Jy sigma=0.000641 ! Fit after self-cal, rms=0.076970Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076970Jy sigma=0.000641 ! Fit after self-cal, rms=0.076864Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=28.79 mas, bpa=-16.79 degrees ! Estimated noise=5047.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172623 Jy ! Component: 100 - total flux cleaned = -0.00161197 Jy ! Component: 150 - total flux cleaned = -0.0015079 Jy ! Component: 200 - total flux cleaned = -0.00150745 Jy ! Total flux subtracted in 200 components = -0.00150745 Jy ! Clean residual min=-0.001404 max=0.001421 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.617306 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 224 components and 0.617306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076574Jy sigma=0.000638 ! Fit after self-cal, rms=0.076572Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445387 Jy ! Component: 100 - total flux cleaned = 0.000949379 Jy ! Component: 150 - total flux cleaned = 0.00154272 Jy ! Component: 200 - total flux cleaned = 0.00197788 Jy ! Total flux subtracted in 200 components = 0.00197788 Jy ! Clean residual min=-0.001011 max=0.001011 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.619284 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 268 components and 0.619284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076460Jy sigma=0.000637 ! Fit after self-cal, rms=0.076457Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076457Jy sigma=0.000637 ! Fit after self-cal, rms=0.076490Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=28.78 mas, bpa=-16.79 degrees ! Estimated noise=5049.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000301746 Jy ! Component: 100 - total flux cleaned = -0.000131854 Jy ! Component: 150 - total flux cleaned = -2.8674e-05 Jy ! Component: 200 - total flux cleaned = 0.000118841 Jy ! Total flux subtracted in 200 components = 0.000118841 Jy ! Clean residual min=-0.000793 max=0.000799 Jy/beam ! Clean residual mean=0.000000 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.619403 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 295 components and 0.619403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076417Jy sigma=0.000637 ! Fit after self-cal, rms=0.076419Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.4919e-05 Jy ! Component: 100 - total flux cleaned = -1.50835e-05 Jy ! Component: 150 - total flux cleaned = -1.46763e-05 Jy ! Component: 200 - total flux cleaned = 0.000114966 Jy ! Total flux subtracted in 200 components = 0.000114966 Jy ! Clean residual min=-0.000707 max=0.000713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.619518 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 345 components and 0.619518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076369Jy sigma=0.000636 ! Fit after self-cal, rms=0.076368Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076368Jy sigma=0.000636 ! Fit after self-cal, rms=0.076367Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.831 mas, bmaj=26.97 mas, bpa=-11.65 degrees ! Estimated noise=6146.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.56572e-05 Jy ! Component: 100 - total flux cleaned = 8.45648e-05 Jy ! Component: 150 - total flux cleaned = 0.000244584 Jy ! Component: 200 - total flux cleaned = 0.000404969 Jy ! Total flux subtracted in 200 components = 0.000404969 Jy ! Clean residual min=-0.000878 max=0.000886 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.619923 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 385 components and 0.619923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076318Jy sigma=0.000636 ! Fit after self-cal, rms=0.076317Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308259 Jy ! Component: 100 - total flux cleaned = -0.000151405 Jy ! Component: 150 - total flux cleaned = -0.000101449 Jy ! Component: 200 - total flux cleaned = -0.000153898 Jy ! Total flux subtracted in 200 components = -0.000153898 Jy ! Clean residual min=-0.000855 max=0.000859 Jy/beam ! Clean residual mean=-0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.619769 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 432 components and 0.619769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076277Jy sigma=0.000635 ! Fit after self-cal, rms=0.076273Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=28.78 mas, bpa=-16.79 degrees ! Estimated noise=5049.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 28.78 at -16.79 degrees (North through East) ! Clean map min=-0.0041919 max=0.46165 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=29.32 mas, bpa=-17.09 degrees ! Estimated noise=5956.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.375845 Jy ! Component: 100 - total flux cleaned = 0.471807 Jy ! Component: 150 - total flux cleaned = 0.519891 Jy ! Component: 200 - total flux cleaned = 0.545454 Jy ! Total flux subtracted in 200 components = 0.545454 Jy ! Clean residual min=-0.018488 max=0.018391 Jy/beam ! Clean residual mean=0.000109 rms=0.007066 Jy/beam ! Combined flux in latest and established models = 0.545454 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 63 model components to the UV plane model. ! The established model now contains 63 components and 0.545454 Jy ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=28.78 mas, bpa=-16.79 degrees ! Estimated noise=5049.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020063 Jy ! Component: 100 - total flux cleaned = 0.0299548 Jy ! Component: 150 - total flux cleaned = 0.0371263 Jy ! Component: 200 - total flux cleaned = 0.0413588 Jy ! Total flux subtracted in 200 components = 0.0413588 Jy ! Clean residual min=-0.006076 max=0.006129 Jy/beam ! Clean residual mean=0.000023 rms=0.002582 Jy/beam ! Combined flux in latest and established models = 0.586812 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 128 components and 0.586812 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.831 mas, bmaj=26.97 mas, bpa=-11.65 degrees ! Estimated noise=6146.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00928845 Jy ! Component: 100 - total flux cleaned = 0.0141474 Jy ! Component: 150 - total flux cleaned = 0.0159712 Jy ! Component: 200 - total flux cleaned = 0.0170493 Jy ! Total flux subtracted in 200 components = 0.0170493 Jy ! Clean residual min=-0.002853 max=0.002866 Jy/beam ! Clean residual mean=0.000024 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.603862 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678791 Jy ! Component: 100 - total flux cleaned = 0.000675998 Jy ! Component: 150 - total flux cleaned = 0.000174746 Jy ! Component: 200 - total flux cleaned = -0.000906515 Jy ! Total flux subtracted in 200 components = -0.000906515 Jy ! Clean residual min=-0.003121 max=0.003164 Jy/beam ! Clean residual mean=0.000048 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.602955 Jy ! Adding 131 model components to the UV plane model. ! The established model now contains 258 components and 0.602955 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=28.78 mas, bpa=-16.79 degrees ! Estimated noise=5049.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00430661 Jy ! Component: 100 - total flux cleaned = -0.00630001 Jy ! Component: 150 - total flux cleaned = -0.0073881 Jy ! Component: 200 - total flux cleaned = -0.0079143 Jy ! Total flux subtracted in 200 components = -0.0079143 Jy ! Clean residual min=-0.001653 max=0.001653 Jy/beam ! Clean residual mean=-0.000004 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.595041 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 312 components and 0.595041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076509Jy sigma=0.000638 ! Fit after self-cal, rms=0.076506Jy sigma=0.000637 wmodel J1408-0752_S_2017_08_12_pus_map.mod ! Writing 312 model components to file: J1408-0752_S_2017_08_12_pus_map.mod wobs J1408-0752_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1408-0752_S_2017_08_12_pus_uvs.fits wwins J1408-0752_S_2017_08_12_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1408-0752_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 28.78 at -16.79 degrees (North through East) ! Clean map min=-0.0068413 max=0.4606 Jy/beam ! Writing clean map to FITS file: J1408-0752_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.460601 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000544963 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.354947 0.354947 0.709894 1.41979 2.83958 5.67915 11.3583 22.7166 45.4332 90.8665 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.46 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 28.78 at -16.79 degrees (North through East) ! Clean map min=-0.0068413 max=0.4606 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1408-0752_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:00:37 2019