! Started logfile: J1408-0752_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:15:17 2019 obs J1408-0752_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1408-0752_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.222222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1408-0752 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1408-0752_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.572997Jy sigma=0.003795 ! Fit after self-cal, rms=0.561423Jy sigma=0.003732 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=18.95 mas, bpa=31.99 degrees ! Estimated noise=6974.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.357686 Jy ! Component: 100 - total flux cleaned = 0.453235 Jy ! Total flux subtracted in 100 components = 0.453235 Jy ! Clean residual min=-0.046767 max=0.047307 Jy/beam ! Clean residual mean=0.000079 rms=0.017718 Jy/beam ! Combined flux in latest and established models = 0.453235 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.453235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143470Jy sigma=0.001061 ! Fit after self-cal, rms=0.143096Jy sigma=0.001060 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=19.53 mas, bpa=32.14 degrees ! Estimated noise=6314.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594827 Jy ! Component: 100 - total flux cleaned = 0.0750714 Jy ! Component: 150 - total flux cleaned = 0.0930117 Jy ! Component: 200 - total flux cleaned = 0.111672 Jy ! Total flux subtracted in 200 components = 0.111672 Jy ! Clean residual min=-0.019497 max=0.019391 Jy/beam ! Clean residual mean=0.000072 rms=0.007655 Jy/beam ! Combined flux in latest and established models = 0.564906 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 78 components and 0.564906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099571Jy sigma=0.000681 ! Fit after self-cal, rms=0.098319Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00* KP 1.00* ! LA 0.98 MK 1.00* NL 1.05 OV 1.00* ! PT 0.93 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00* KP 1.00* ! LA 0.93 MK 1.00* NL 1.06 OV 1.00* ! PT 0.94 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.00* KP 1.00* ! LA 0.94 MK 1.00* NL 0.97 OV 1.00* ! PT 0.95 SC 1.05 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.098319Jy sigma=0.000672 ! Fit after self-cal, rms=0.090597Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=19.16 mas, bpa=32.01 degrees ! Estimated noise=6302.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508195 Jy ! Component: 100 - total flux cleaned = 0.00513333 Jy ! Component: 150 - total flux cleaned = 0.00281918 Jy ! Component: 200 - total flux cleaned = 0.000274533 Jy ! Total flux subtracted in 200 components = 0.000274533 Jy ! Clean residual min=-0.004722 max=0.004829 Jy/beam ! Clean residual mean=-0.000005 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.565181 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 114 components and 0.565181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087963Jy sigma=0.000624 ! Fit after self-cal, rms=0.088025Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088025Jy sigma=0.000624 ! Fit after self-cal, rms=0.087775Jy sigma=0.000623 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=19.13 mas, bpa=32.01 degrees ! Estimated noise=6293.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000954897 Jy ! Component: 100 - total flux cleaned = -0.00113502 Jy ! Component: 150 - total flux cleaned = -0.00081343 Jy ! Component: 200 - total flux cleaned = -0.00038267 Jy ! Total flux subtracted in 200 components = -0.00038267 Jy ! Clean residual min=-0.002371 max=0.002370 Jy/beam ! Clean residual mean=-0.000006 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.564798 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 144 components and 0.564798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087153Jy sigma=0.000619 ! Fit after self-cal, rms=0.087100Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011777 Jy ! Component: 100 - total flux cleaned = 0.00159746 Jy ! Component: 150 - total flux cleaned = 0.00169511 Jy ! Component: 200 - total flux cleaned = 0.00178974 Jy ! Total flux subtracted in 200 components = 0.00178974 Jy ! Clean residual min=-0.001517 max=0.001527 Jy/beam ! Clean residual mean=-0.000002 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.566588 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 178 components and 0.566588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086852Jy sigma=0.000618 ! Fit after self-cal, rms=0.086845Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086845Jy sigma=0.000618 ! Fit after self-cal, rms=0.086902Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=19.12 mas, bpa=32.01 degrees ! Estimated noise=6294.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000753696 Jy ! Component: 100 - total flux cleaned = 0.000749295 Jy ! Component: 150 - total flux cleaned = 0.000595193 Jy ! Component: 200 - total flux cleaned = 0.000226392 Jy ! Total flux subtracted in 200 components = 0.000226392 Jy ! Clean residual min=-0.001210 max=0.001207 Jy/beam ! Clean residual mean=-0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.566814 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 197 components and 0.566814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086752Jy sigma=0.000617 ! Fit after self-cal, rms=0.086751Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014626 Jy ! Component: 100 - total flux cleaned = 0.00199028 Jy ! Component: 150 - total flux cleaned = 0.0024182 Jy ! Component: 200 - total flux cleaned = 0.00236637 Jy ! Total flux subtracted in 200 components = 0.00236637 Jy ! Clean residual min=-0.000867 max=0.000850 Jy/beam ! Clean residual mean=-0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.569181 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 221 components and 0.569181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086684Jy sigma=0.000616 ! Fit after self-cal, rms=0.086683Jy sigma=0.000616 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086683Jy sigma=0.000616 ! Fit after self-cal, rms=0.086670Jy sigma=0.000616 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.153 mas, bmaj=17.52 mas, bpa=25.98 degrees ! Estimated noise=7344.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377092 Jy ! Component: 100 - total flux cleaned = 0.000410979 Jy ! Component: 150 - total flux cleaned = 0.000417304 Jy ! Component: 200 - total flux cleaned = 0.0005913 Jy ! Total flux subtracted in 200 components = 0.0005913 Jy ! Clean residual min=-0.001704 max=0.001669 Jy/beam ! Clean residual mean=-0.000000 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.569772 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 251 components and 0.569772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086655Jy sigma=0.000616 ! Fit after self-cal, rms=0.086658Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.25704e-05 Jy ! Component: 100 - total flux cleaned = 6.15861e-05 Jy ! Component: 150 - total flux cleaned = 6.76055e-05 Jy ! Component: 200 - total flux cleaned = 0.000230457 Jy ! Total flux subtracted in 200 components = 0.000230457 Jy ! Clean residual min=-0.001039 max=0.001080 Jy/beam ! Clean residual mean=-0.000001 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.570003 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 291 components and 0.570003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086629Jy sigma=0.000616 ! Fit after self-cal, rms=0.086626Jy sigma=0.000616 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=19.11 mas, bpa=32.01 degrees ! Estimated noise=6291.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.451 x 19.11 at 32.01 degrees (North through East) ! Clean map min=-0.014323 max=0.37392 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=18.46 mas, bpa=31.93 degrees ! Estimated noise=6857.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.361286 Jy ! Component: 100 - total flux cleaned = 0.455211 Jy ! Component: 150 - total flux cleaned = 0.506036 Jy ! Component: 200 - total flux cleaned = 0.543189 Jy ! Total flux subtracted in 200 components = 0.543189 Jy ! Clean residual min=-0.027019 max=0.026740 Jy/beam ! Clean residual mean=0.000071 rms=0.008222 Jy/beam ! Combined flux in latest and established models = 0.543189 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.543189 Jy ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=19.11 mas, bpa=32.01 degrees ! Estimated noise=6291.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648268 Jy ! Component: 100 - total flux cleaned = -0.000720696 Jy ! Component: 150 - total flux cleaned = 0.000470143 Jy ! Component: 200 - total flux cleaned = 0.00144557 Jy ! Total flux subtracted in 200 components = 0.00144557 Jy ! Clean residual min=-0.007016 max=0.006978 Jy/beam ! Clean residual mean=0.000005 rms=0.002756 Jy/beam ! Combined flux in latest and established models = 0.544634 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 97 components and 0.544634 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.153 mas, bmaj=17.52 mas, bpa=25.98 degrees ! Estimated noise=7344.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624364 Jy ! Component: 100 - total flux cleaned = 0.00861463 Jy ! Component: 150 - total flux cleaned = 0.00860428 Jy ! Component: 200 - total flux cleaned = 0.00856556 Jy ! Total flux subtracted in 200 components = 0.00856556 Jy ! Clean residual min=-0.016743 max=0.017266 Jy/beam ! Clean residual mean=0.000015 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 0.5532 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-125, -123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016843 Jy ! Component: 100 - total flux cleaned = 0.023395 Jy ! Component: 150 - total flux cleaned = 0.0244595 Jy ! Component: 200 - total flux cleaned = 0.0252404 Jy ! Total flux subtracted in 200 components = 0.0252404 Jy ! Clean residual min=-0.052675 max=0.019366 Jy/beam ! Clean residual mean=0.000002 rms=0.007624 Jy/beam ! Combined flux in latest and established models = 0.57844 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 172 components and 0.57844 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=19.11 mas, bpa=32.01 degrees ! Estimated noise=6291.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0132874 Jy ! Component: 100 - total flux cleaned = -0.0169643 Jy ! Component: 150 - total flux cleaned = -0.0175884 Jy ! Component: 200 - total flux cleaned = -0.017337 Jy ! Total flux subtracted in 200 components = -0.017337 Jy ! Clean residual min=-0.007669 max=0.017785 Jy/beam ! Clean residual mean=0.000001 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.561103 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 191 components and 0.561103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087537Jy sigma=0.000621 ! Fit after self-cal, rms=0.087406Jy sigma=0.000620 wmodel J1408-0752_S_2017_01_16_pus_map.mod ! Writing 191 model components to file: J1408-0752_S_2017_01_16_pus_map.mod wobs J1408-0752_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1408-0752_S_2017_01_16_pus_uvs.fits wwins J1408-0752_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1408-0752_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103219 Jy ! Component: 100 - total flux cleaned = -0.000234209 Jy ! Component: 150 - total flux cleaned = -0.00023764 Jy ! Component: 200 - total flux cleaned = -0.000294682 Jy ! Component: 250 - total flux cleaned = -0.000406622 Jy ! Component: 300 - total flux cleaned = -0.000516542 Jy ! Component: 350 - total flux cleaned = -0.000624859 Jy ! Component: 400 - total flux cleaned = -0.000404571 Jy ! Component: 450 - total flux cleaned = -0.000178719 Jy ! Component: 500 - total flux cleaned = 5.45156e-05 Jy ! Component: 550 - total flux cleaned = 0.000420908 Jy ! Component: 600 - total flux cleaned = 0.000805665 Jy ! Component: 650 - total flux cleaned = 0.00100844 Jy ! Component: 700 - total flux cleaned = 0.00122344 Jy ! Component: 750 - total flux cleaned = 0.0013009 Jy ! Component: 800 - total flux cleaned = 0.00138018 Jy ! Component: 850 - total flux cleaned = 0.00146882 Jy ! Component: 900 - total flux cleaned = 0.00156375 Jy ! Component: 950 - total flux cleaned = 0.00177756 Jy ! Component: 1000 - total flux cleaned = 0.00189571 Jy ! Component: 1050 - total flux cleaned = 0.00202018 Jy ! Component: 1100 - total flux cleaned = 0.00215588 Jy ! Component: 1150 - total flux cleaned = 0.00245935 Jy ! Component: 1200 - total flux cleaned = 0.00246136 Jy ! Component: 1250 - total flux cleaned = 0.00264001 Jy ! Component: 1300 - total flux cleaned = 0.00283295 Jy ! Component: 1350 - total flux cleaned = 0.00304803 Jy ! Component: 1400 - total flux cleaned = 0.00329268 Jy ! Component: 1450 - total flux cleaned = 0.00328528 Jy ! Component: 1500 - total flux cleaned = 0.00357464 Jy ! Component: 1550 - total flux cleaned = 0.00390697 Jy ! Component: 1600 - total flux cleaned = 0.00391544 Jy ! Component: 1650 - total flux cleaned = 0.00391929 Jy ! Component: 1700 - total flux cleaned = 0.00391204 Jy ! Component: 1750 - total flux cleaned = 0.0039125 Jy ! Component: 1800 - total flux cleaned = 0.00391835 Jy ! Component: 1850 - total flux cleaned = 0.00448623 Jy ! Component: 1900 - total flux cleaned = 0.00450018 Jy ! Component: 1950 - total flux cleaned = 0.00448716 Jy ! Component: 2000 - total flux cleaned = 0.00446433 Jy ! Component: 2050 - total flux cleaned = 0.00446168 Jy ! Component: 2100 - total flux cleaned = 0.00446198 Jy ! Component: 2150 - total flux cleaned = 0.00540781 Jy ! Component: 2200 - total flux cleaned = 0.00533677 Jy ! Component: 2250 - total flux cleaned = 0.0052879 Jy ! Component: 2300 - total flux cleaned = 0.00527241 Jy ! Component: 2350 - total flux cleaned = 0.00670281 Jy ! Component: 2400 - total flux cleaned = 0.00662322 Jy ! Component: 2450 - total flux cleaned = 0.00651807 Jy ! Component: 2500 - total flux cleaned = 0.0064662 Jy ! Component: 2550 - total flux cleaned = 0.00644868 Jy ! Component: 2600 - total flux cleaned = 0.00641784 Jy ! Component: 2650 - total flux cleaned = 0.00894367 Jy ! Component: 2700 - total flux cleaned = 0.00905522 Jy ! Component: 2750 - total flux cleaned = 0.00892528 Jy ! Component: 2800 - total flux cleaned = 0.00879309 Jy ! Component: 2850 - total flux cleaned = 0.00875766 Jy ! Component: 2900 - total flux cleaned = 0.0087396 Jy ! Component: 2950 - total flux cleaned = 0.00881658 Jy ! Component: 3000 - total flux cleaned = 0.00873587 Jy ! Component: 3050 - total flux cleaned = 0.0140105 Jy ! Component: 3100 - total flux cleaned = 0.0136273 Jy ! Component: 3150 - total flux cleaned = 0.0133957 Jy ! Component: 3200 - total flux cleaned = 0.0133271 Jy ! Component: 3250 - total flux cleaned = 0.0133946 Jy ! Component: 3300 - total flux cleaned = 0.0135992 Jy ! Component: 3350 - total flux cleaned = 0.0232693 Jy ! Component: 3400 - total flux cleaned = 0.0234352 Jy ! Component: 3450 - total flux cleaned = 0.0238433 Jy ! Component: 3500 - total flux cleaned = 0.0242492 Jy ! Component: 3550 - total flux cleaned = 0.02454 Jy ! Component: 3600 - total flux cleaned = 0.0244042 Jy ! Component: 3650 - total flux cleaned = 0.0244884 Jy ! Component: 3700 - total flux cleaned = 0.0424785 Jy ! Component: 3750 - total flux cleaned = 0.0428271 Jy ! Component: 3800 - total flux cleaned = 0.0435344 Jy ! Component: 3850 - total flux cleaned = 0.0449083 Jy ! Component: 3900 - total flux cleaned = 0.0467009 Jy ! Component: 3950 - total flux cleaned = 0.0480194 Jy ! Component: 4000 - total flux cleaned = 0.0471534 Jy ! Component: 4050 - total flux cleaned = 0.0467567 Jy ! Total flux subtracted in 4096 components = 0.0460596 Jy ! Clean residual min=-2.198904 max=2.308477 Jy/beam ! Clean residual mean=-0.000261 rms=0.335204 Jy/beam ! Combined flux in latest and established models = 0.607163 Jy keep ! Adding 73 model components to the UV plane model. ! The established model now contains 264 components and 0.607163 Jy ![Exited script file: muppet] wmap "J1408-0752_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.451 x 19.11 at 32.01 degrees (North through East) ! Clean map min=-1.9863 max=1.973 Jy/beam ! Writing clean map to FITS file: J1408-0752_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.973 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.165718 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -25.1979 25.1979 50.3957 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.4971 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.973 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.451 x 19.11 at 32.01 degrees (North through East) ! Clean map min=-1.9863 max=1.973 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1408-0752_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:15:22 2019