! Started logfile: J1407-3431_S_2017_04_28_pus_uvs.log on Thu May 2 16:28:03 2019 obs J1407-3431_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1407-3431_S_2017_04_28_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.771689 visibilities/baseline/integration-bin. ! Found source: J1407-3431 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 20280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1407-3431_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 766 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914912Jy sigma=0.030507 ! Fit after self-cal, rms=0.866044Jy sigma=0.030348 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=7.42 mas, bpa=-2.772 degrees ! Estimated noise=1224.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703394 Jy ! Component: 100 - total flux cleaned = 0.095007 Jy ! Total flux subtracted in 100 components = 0.095007 Jy ! Clean residual min=-0.027195 max=0.028710 Jy/beam ! Clean residual mean=0.000014 rms=0.008875 Jy/beam ! Combined flux in latest and established models = 0.095007 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.095007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181647Jy sigma=0.002677 ! Fit after self-cal, rms=0.181504Jy sigma=0.002659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=9.525 mas, bpa=-2.218 degrees ! Estimated noise=610.165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113688 Jy ! Component: 100 - total flux cleaned = 0.0137983 Jy ! Component: 150 - total flux cleaned = 0.0141595 Jy ! Component: 200 - total flux cleaned = 0.0143351 Jy ! Total flux subtracted in 200 components = 0.0143351 Jy ! Clean residual min=-0.029945 max=0.036228 Jy/beam ! Clean residual mean=-0.000007 rms=0.012460 Jy/beam ! Combined flux in latest and established models = 0.109342 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.109342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176878Jy sigma=0.002981 ! Fit after self-cal, rms=0.176875Jy sigma=0.002981 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.70 HN 1.05 KP 0.69 ! LA 0.67 MK 1.36 NL 0.73 OV 0.71 ! PT 0.76 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.64 HN 1.15 KP 0.67 ! LA 0.66 MK 1.46 NL 0.90 OV 0.73 ! PT 0.75 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.64 FD 0.66 HN 1.05 KP 0.72 ! LA 0.68 MK 1.25 NL 0.84 OV 0.67 ! PT 0.72 SC 1.14 ! ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.77 HN 1.20 KP 1.00* ! LA 26.40 MK 0.99 NL 1.00* OV 1.00* ! PT 0.75 SC 1.00* ! ! ! Fit before self-cal, rms=0.176875Jy sigma=0.002981 ! Fit after self-cal, rms=1.405580Jy sigma=0.000691 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=9.649 mas, bpa=3.096 degrees ! Estimated noise=625.883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293907 Jy ! Component: 100 - total flux cleaned = 0.00306979 Jy ! Component: 150 - total flux cleaned = 0.00295835 Jy ! Component: 200 - total flux cleaned = 0.00284919 Jy ! Total flux subtracted in 200 components = 0.00284919 Jy ! Clean residual min=-0.003311 max=0.004339 Jy/beam ! Clean residual mean=-0.000020 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.112191 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.112191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.405458Jy sigma=0.000689 ! Fit after self-cal, rms=1.406235Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.406235Jy sigma=0.000683 ! Fit after self-cal, rms=1.402687Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=9.41 mas, bpa=2.206 degrees ! Estimated noise=621.576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245341 Jy ! Component: 100 - total flux cleaned = 0.00245201 Jy ! Component: 150 - total flux cleaned = 0.00245646 Jy ! Component: 200 - total flux cleaned = 0.00245845 Jy ! Total flux subtracted in 200 components = 0.00245845 Jy ! Clean residual min=-0.002959 max=0.003421 Jy/beam ! Clean residual mean=-0.000019 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.11465 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.11465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.402547Jy sigma=0.000680 ! Fit after self-cal, rms=1.402532Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254921 Jy ! Component: 100 - total flux cleaned = 0.00246877 Jy ! Component: 150 - total flux cleaned = 0.00206581 Jy ! Component: 200 - total flux cleaned = 0.00191841 Jy ! Total flux subtracted in 200 components = 0.00191841 Jy ! Clean residual min=-0.002761 max=0.002954 Jy/beam ! Clean residual mean=-0.000018 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.116568 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.116568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.402470Jy sigma=0.000679 ! Fit after self-cal, rms=1.402453Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.402453Jy sigma=0.000679 ! Fit after self-cal, rms=1.309948Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.725 mas, bmaj=9.223 mas, bpa=1.627 degrees ! Estimated noise=619.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284736 Jy ! Component: 100 - total flux cleaned = 0.00314661 Jy ! Component: 150 - total flux cleaned = 0.0031504 Jy ! Component: 200 - total flux cleaned = 0.00315267 Jy ! Total flux subtracted in 200 components = 0.00315267 Jy ! Clean residual min=-0.002654 max=0.002631 Jy/beam ! Clean residual mean=-0.000015 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.119721 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.119721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.309780Jy sigma=0.000677 ! Fit after self-cal, rms=1.309752Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368088 Jy ! Component: 100 - total flux cleaned = 0.000244544 Jy ! Component: 150 - total flux cleaned = 7.99613e-05 Jy ! Component: 200 - total flux cleaned = -2.27466e-05 Jy ! Total flux subtracted in 200 components = -2.27466e-05 Jy ! Clean residual min=-0.002559 max=0.002603 Jy/beam ! Clean residual mean=-0.000016 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.119698 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 60 components and 0.119698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.309740Jy sigma=0.000677 ! Fit after self-cal, rms=1.309720Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.309720Jy sigma=0.000677 ! Fit after self-cal, rms=1.301200Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.439 mas, bmaj=27.29 mas, bpa=5.232 degrees ! Estimated noise=660.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225757 Jy ! Component: 100 - total flux cleaned = 0.00309267 Jy ! Component: 150 - total flux cleaned = 0.00345349 Jy ! Component: 200 - total flux cleaned = 0.00355655 Jy ! Total flux subtracted in 200 components = 0.00355655 Jy ! Clean residual min=-0.002556 max=0.002397 Jy/beam ! Clean residual mean=-0.000026 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.123255 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.123255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.301029Jy sigma=0.000676 ! Fit after self-cal, rms=1.301025Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255637 Jy ! Component: 100 - total flux cleaned = 0.000332591 Jy ! Component: 150 - total flux cleaned = 0.000405103 Jy ! Component: 200 - total flux cleaned = 0.000475211 Jy ! Total flux subtracted in 200 components = 0.000475211 Jy ! Clean residual min=-0.002549 max=0.002377 Jy/beam ! Clean residual mean=-0.000026 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.12373 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.12373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.301013Jy sigma=0.000676 ! Fit after self-cal, rms=1.301014Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=9.004 mas, bpa=0.9836 degrees ! Estimated noise=618.474 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 9.004 at 0.9836 degrees (North through East) ! Clean map min=-0.0024433 max=0.085314 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=7.132 mas, bpa=0.4877 degrees ! Estimated noise=1188.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.069038 Jy ! Component: 100 - total flux cleaned = 0.0921488 Jy ! Component: 150 - total flux cleaned = 0.103924 Jy ! Component: 200 - total flux cleaned = 0.11083 Jy ! Total flux subtracted in 200 components = 0.11083 Jy ! Clean residual min=-0.004405 max=0.004843 Jy/beam ! Clean residual mean=-0.000005 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.110831 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.110831 Jy ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=9.004 mas, bpa=0.9836 degrees ! Estimated noise=618.474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621322 Jy ! Component: 100 - total flux cleaned = 0.00961919 Jy ! Component: 150 - total flux cleaned = 0.0111146 Jy ! Component: 200 - total flux cleaned = 0.0114472 Jy ! Total flux subtracted in 200 components = 0.0114472 Jy ! Clean residual min=-0.002673 max=0.002689 Jy/beam ! Clean residual mean=-0.000016 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.122278 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 0.122278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.439 mas, bmaj=27.29 mas, bpa=5.232 degrees ! Estimated noise=660.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111154 Jy ! Component: 100 - total flux cleaned = 0.0013209 Jy ! Component: 150 - total flux cleaned = 0.00157986 Jy ! Component: 200 - total flux cleaned = 0.0018055 Jy ! Total flux subtracted in 200 components = 0.0018055 Jy ! Clean residual min=-0.002460 max=0.002439 Jy/beam ! Clean residual mean=-0.000027 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.124083 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.89914e-05 Jy ! Component: 100 - total flux cleaned = 8.64995e-05 Jy ! Component: 150 - total flux cleaned = 0.000168676 Jy ! Component: 200 - total flux cleaned = 0.000221449 Jy ! Total flux subtracted in 200 components = 0.000221449 Jy ! Clean residual min=-0.002441 max=0.002394 Jy/beam ! Clean residual mean=-0.000027 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.124305 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 78 components and 0.124305 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=9.004 mas, bpa=0.9836 degrees ! Estimated noise=618.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138106 Jy ! Component: 100 - total flux cleaned = -0.000488637 Jy ! Component: 150 - total flux cleaned = -0.00068012 Jy ! Component: 200 - total flux cleaned = -0.000796949 Jy ! Total flux subtracted in 200 components = -0.000796949 Jy ! Clean residual min=-0.002514 max=0.002356 Jy/beam ! Clean residual mean=-0.000016 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.123508 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.123508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.301004Jy sigma=0.000676 ! Fit after self-cal, rms=1.301012Jy sigma=0.000675 wmodel J1407-3431_S_2017_04_28_pus_map.mod ! Writing 100 model components to file: J1407-3431_S_2017_04_28_pus_map.mod wobs J1407-3431_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1407-3431_S_2017_04_28_pus_uvs.fits wwins J1407-3431_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J1407-3431_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022369 Jy ! Component: 100 - total flux cleaned = -0.000457307 Jy ! Component: 150 - total flux cleaned = -0.000458141 Jy ! Component: 200 - total flux cleaned = -0.000458137 Jy ! Component: 250 - total flux cleaned = -0.000356383 Jy ! Component: 300 - total flux cleaned = -0.000322903 Jy ! Component: 350 - total flux cleaned = -0.000226779 Jy ! Component: 400 - total flux cleaned = -0.000133822 Jy ! Component: 450 - total flux cleaned = -4.43255e-05 Jy ! Component: 500 - total flux cleaned = 4.22403e-05 Jy ! Component: 550 - total flux cleaned = 4.24249e-05 Jy ! Component: 600 - total flux cleaned = 0.00012572 Jy ! Component: 650 - total flux cleaned = 0.000233449 Jy ! Component: 700 - total flux cleaned = 0.000365581 Jy ! Component: 750 - total flux cleaned = 0.000443193 Jy ! Component: 800 - total flux cleaned = 0.000595326 Jy ! Component: 850 - total flux cleaned = 0.000743454 Jy ! Component: 900 - total flux cleaned = 0.000816082 Jy ! Component: 950 - total flux cleaned = 0.000863853 Jy ! Component: 1000 - total flux cleaned = 0.00100531 Jy ! Component: 1050 - total flux cleaned = 0.00107453 Jy ! Component: 1100 - total flux cleaned = 0.00116575 Jy ! Component: 1150 - total flux cleaned = 0.00118868 Jy ! Component: 1200 - total flux cleaned = 0.00127756 Jy ! Component: 1250 - total flux cleaned = 0.00136475 Jy ! Component: 1300 - total flux cleaned = 0.00145067 Jy ! Component: 1350 - total flux cleaned = 0.00145073 Jy ! Component: 1400 - total flux cleaned = 0.00153445 Jy ! Component: 1450 - total flux cleaned = 0.00159636 Jy ! Component: 1500 - total flux cleaned = 0.00165745 Jy ! Component: 1550 - total flux cleaned = 0.00167768 Jy ! Component: 1600 - total flux cleaned = 0.00173721 Jy ! Component: 1650 - total flux cleaned = 0.001796 Jy ! Component: 1700 - total flux cleaned = 0.00185417 Jy ! Component: 1750 - total flux cleaned = 0.00191189 Jy ! Component: 1800 - total flux cleaned = 0.00198788 Jy ! Component: 1850 - total flux cleaned = 0.00200664 Jy ! Component: 1900 - total flux cleaned = 0.00200659 Jy ! Component: 1950 - total flux cleaned = 0.00202503 Jy ! Component: 2000 - total flux cleaned = 0.0020614 Jy ! Component: 2050 - total flux cleaned = 0.00209754 Jy ! Component: 2100 - total flux cleaned = 0.00215128 Jy ! Component: 2150 - total flux cleaned = 0.00216913 Jy ! Component: 2200 - total flux cleaned = 0.00218678 Jy ! Component: 2250 - total flux cleaned = 0.0022042 Jy ! Component: 2300 - total flux cleaned = 0.00222141 Jy ! Component: 2350 - total flux cleaned = 0.00227252 Jy ! Component: 2400 - total flux cleaned = 0.00225552 Jy ! Component: 2450 - total flux cleaned = 0.00225565 Jy ! Component: 2500 - total flux cleaned = 0.00225557 Jy ! Component: 2550 - total flux cleaned = 0.00233835 Jy ! Component: 2600 - total flux cleaned = 0.00233818 Jy ! Component: 2650 - total flux cleaned = 0.00233828 Jy ! Component: 2700 - total flux cleaned = 0.00235445 Jy ! Component: 2750 - total flux cleaned = 0.00240257 Jy ! Component: 2800 - total flux cleaned = 0.0024342 Jy ! Component: 2850 - total flux cleaned = 0.00241847 Jy ! Component: 2900 - total flux cleaned = 0.00244971 Jy ! Component: 2950 - total flux cleaned = 0.00246534 Jy ! Component: 3000 - total flux cleaned = 0.00246534 Jy ! Component: 3050 - total flux cleaned = 0.00249615 Jy ! Component: 3100 - total flux cleaned = 0.00254175 Jy ! Component: 3150 - total flux cleaned = 0.00258708 Jy ! Component: 3200 - total flux cleaned = 0.00260209 Jy ! Component: 3250 - total flux cleaned = 0.00267657 Jy ! Component: 3300 - total flux cleaned = 0.00267651 Jy ! Component: 3350 - total flux cleaned = 0.0026766 Jy ! Component: 3400 - total flux cleaned = 0.00273517 Jy ! Component: 3450 - total flux cleaned = 0.00273504 Jy ! Component: 3500 - total flux cleaned = 0.00276385 Jy ! Component: 3550 - total flux cleaned = 0.00280691 Jy ! Component: 3600 - total flux cleaned = 0.00282113 Jy ! Component: 3650 - total flux cleaned = 0.0028211 Jy ! Component: 3700 - total flux cleaned = 0.00289165 Jy ! Component: 3750 - total flux cleaned = 0.00293366 Jy ! Component: 3800 - total flux cleaned = 0.00300324 Jy ! Component: 3850 - total flux cleaned = 0.00303089 Jy ! Component: 3900 - total flux cleaned = 0.00308585 Jy ! Component: 3950 - total flux cleaned = 0.00312685 Jy ! Component: 4000 - total flux cleaned = 0.00315391 Jy ! Component: 4050 - total flux cleaned = 0.00316761 Jy ! Total flux subtracted in 4096 components = 0.00320805 Jy ! Clean residual min=-0.000904 max=0.000766 Jy/beam ! Clean residual mean=0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.126716 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 357 components and 0.126716 Jy ![Exited script file: muppet] wmap "J1407-3431_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 9.004 at 0.9836 degrees (North through East) ! Clean map min=-0.0015003 max=0.082005 Jy/beam ! Writing clean map to FITS file: J1407-3431_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0820049 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00023983 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.877373 0.877373 1.75475 3.50949 7.01899 14.038 28.0759 56.1519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 9.004 at 0.9836 degrees (North through East) ! Clean map min=-0.0015003 max=0.082005 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1407-3431_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:28:08 2019