! Started logfile: J1405-1440_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:58 2019 obs J1405-1440_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1405-1440_S_2017_04_28_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.776587 visibilities/baseline/integration-bin. ! Found source: J1405-1440 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 7828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1405-1440_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859199Jy sigma=0.038964 ! Fit after self-cal, rms=0.853412Jy sigma=0.038724 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=7.4 mas, bpa=-17.26 degrees ! Estimated noise=703.977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542265 Jy ! Component: 100 - total flux cleaned = 0.0778479 Jy ! Total flux subtracted in 100 components = 0.0778479 Jy ! Clean residual min=-0.019666 max=0.022839 Jy/beam ! Clean residual mean=0.000177 rms=0.006113 Jy/beam ! Combined flux in latest and established models = 0.0778479 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0778479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152346Jy sigma=0.002564 ! Fit after self-cal, rms=0.151115Jy sigma=0.002559 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.195 mas, bpa=-15.19 degrees ! Estimated noise=559.777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654004 Jy ! Component: 100 - total flux cleaned = 0.00580964 Jy ! Component: 150 - total flux cleaned = 0.00484603 Jy ! Component: 200 - total flux cleaned = 0.00370223 Jy ! Total flux subtracted in 200 components = 0.00370223 Jy ! Clean residual min=-0.025194 max=0.025628 Jy/beam ! Clean residual mean=0.000149 rms=0.007530 Jy/beam ! Combined flux in latest and established models = 0.0815502 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.0815502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143999Jy sigma=0.002812 ! Fit after self-cal, rms=0.143871Jy sigma=0.002812 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 0.67 HN 0.71 KP 0.66 ! LA 0.63 MK 0.32 NL 0.67 OV 0.70 ! PT 0.75 SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.60 HN 0.75 KP 0.64 ! LA 0.63 MK 1.00* NL 0.80 OV 0.70 ! PT 0.73 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.64 HN 0.71 KP 0.67 ! LA 0.64 MK 9.78 NL 0.78 OV 0.66 ! PT 0.70 SC 0.86 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.81 HN 0.84 KP 1.00* ! LA 17.95 MK 0.16 NL 1.00* OV 1.00* ! PT 0.85 SC 1.00* ! ! ! Fit before self-cal, rms=0.143871Jy sigma=0.002812 ! Fit after self-cal, rms=0.053023Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=8.17 mas, bpa=-0.4656 degrees ! Estimated noise=622.513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383291 Jy ! Component: 100 - total flux cleaned = 0.000385908 Jy ! Component: 150 - total flux cleaned = 0.00031368 Jy ! Component: 200 - total flux cleaned = 0.000347453 Jy ! Total flux subtracted in 200 components = 0.000347453 Jy ! Clean residual min=-0.002291 max=0.002275 Jy/beam ! Clean residual mean=0.000005 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0818976 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.0818976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052958Jy sigma=0.000675 ! Fit after self-cal, rms=0.050747Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050747Jy sigma=0.000658 ! Fit after self-cal, rms=0.049223Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=8.138 mas, bpa=-1.209 degrees ! Estimated noise=614.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313625 Jy ! Component: 100 - total flux cleaned = 0.000419845 Jy ! Component: 150 - total flux cleaned = 0.000515536 Jy ! Component: 200 - total flux cleaned = 0.000573116 Jy ! Total flux subtracted in 200 components = 0.000573116 Jy ! Clean residual min=-0.001541 max=0.001564 Jy/beam ! Clean residual mean=0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0824707 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0824707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049178Jy sigma=0.000646 ! Fit after self-cal, rms=0.049197Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82942e-05 Jy ! Component: 100 - total flux cleaned = 5.50531e-05 Jy ! Component: 150 - total flux cleaned = 0.000105518 Jy ! Component: 200 - total flux cleaned = 0.000153148 Jy ! Total flux subtracted in 200 components = 0.000153148 Jy ! Clean residual min=-0.001517 max=0.001534 Jy/beam ! Clean residual mean=0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0826239 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0826239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049170Jy sigma=0.000646 ! Fit after self-cal, rms=0.049168Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049168Jy sigma=0.000646 ! Fit after self-cal, rms=0.049312Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=8.197 mas, bpa=-0.5318 degrees ! Estimated noise=617.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333848 Jy ! Component: 100 - total flux cleaned = 0.000443866 Jy ! Component: 150 - total flux cleaned = 0.000543386 Jy ! Component: 200 - total flux cleaned = 0.000589246 Jy ! Total flux subtracted in 200 components = 0.000589246 Jy ! Clean residual min=-0.001464 max=0.001537 Jy/beam ! Clean residual mean=0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0832131 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0832131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049283Jy sigma=0.000645 ! Fit after self-cal, rms=0.049283Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.64186e-05 Jy ! Component: 100 - total flux cleaned = 9.02746e-05 Jy ! Component: 150 - total flux cleaned = 0.000130549 Jy ! Component: 200 - total flux cleaned = 0.00014955 Jy ! Total flux subtracted in 200 components = 0.00014955 Jy ! Clean residual min=-0.001461 max=0.001525 Jy/beam ! Clean residual mean=0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0833627 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0833627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049264Jy sigma=0.000645 ! Fit after self-cal, rms=0.049263Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049263Jy sigma=0.000645 ! Fit after self-cal, rms=0.049318Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.716 mas, bmaj=14.85 mas, bpa=2.658 degrees ! Estimated noise=714.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443857 Jy ! Component: 100 - total flux cleaned = 0.00055992 Jy ! Component: 150 - total flux cleaned = 0.00058379 Jy ! Component: 200 - total flux cleaned = 0.000608933 Jy ! Total flux subtracted in 200 components = 0.000608933 Jy ! Clean residual min=-0.001411 max=0.001379 Jy/beam ! Clean residual mean=0.000002 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0839716 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.0839716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049312Jy sigma=0.000645 ! Fit after self-cal, rms=0.049310Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.76572e-05 Jy ! Component: 100 - total flux cleaned = 2.78896e-05 Jy ! Component: 150 - total flux cleaned = 3.12142e-05 Jy ! Component: 200 - total flux cleaned = 3.73919e-05 Jy ! Total flux subtracted in 200 components = 3.73919e-05 Jy ! Clean residual min=-0.001410 max=0.001382 Jy/beam ! Clean residual mean=0.000002 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.084009 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.084009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049309Jy sigma=0.000645 ! Fit after self-cal, rms=0.049309Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=8.241 mas, bpa=0.02757 degrees ! Estimated noise=620.003 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.869 x 8.241 at 0.02757 degrees (North through East) ! Clean map min=-0.0024223 max=0.081054 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=6.769 mas, bpa=-2.142 degrees ! Estimated noise=877.924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621013 Jy ! Component: 100 - total flux cleaned = 0.0811749 Jy ! Component: 150 - total flux cleaned = 0.0871015 Jy ! Component: 200 - total flux cleaned = 0.0863326 Jy ! Total flux subtracted in 200 components = 0.0863326 Jy ! Clean residual min=-0.003394 max=0.003138 Jy/beam ! Clean residual mean=0.000002 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0863326 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0863326 Jy ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=8.241 mas, bpa=0.02757 degrees ! Estimated noise=620.003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000937277 Jy ! Component: 100 - total flux cleaned = -0.00114947 Jy ! Component: 150 - total flux cleaned = -0.001333 Jy ! Component: 200 - total flux cleaned = -0.0014913 Jy ! Total flux subtracted in 200 components = -0.0014913 Jy ! Clean residual min=-0.002143 max=0.001704 Jy/beam ! Clean residual mean=0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0848413 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.0848413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.716 mas, bmaj=14.85 mas, bpa=2.658 degrees ! Estimated noise=714.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149485 Jy ! Component: 100 - total flux cleaned = -0.000231436 Jy ! Component: 150 - total flux cleaned = -0.000324204 Jy ! Component: 200 - total flux cleaned = -0.0003833 Jy ! Total flux subtracted in 200 components = -0.0003833 Jy ! Clean residual min=-0.001542 max=0.001400 Jy/beam ! Clean residual mean=0.000002 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.084458 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.17169e-05 Jy ! Component: 100 - total flux cleaned = -9.61848e-05 Jy ! Component: 150 - total flux cleaned = -0.00012204 Jy ! Component: 200 - total flux cleaned = -0.000157015 Jy ! Total flux subtracted in 200 components = -0.000157015 Jy ! Clean residual min=-0.001483 max=0.001391 Jy/beam ! Clean residual mean=0.000002 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.084301 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.084301 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=8.241 mas, bpa=0.02757 degrees ! Estimated noise=620.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020121 Jy ! Component: 100 - total flux cleaned = 0.000208137 Jy ! Component: 150 - total flux cleaned = 0.000208153 Jy ! Component: 200 - total flux cleaned = 0.000207988 Jy ! Total flux subtracted in 200 components = 0.000207988 Jy ! Clean residual min=-0.001408 max=0.001583 Jy/beam ! Clean residual mean=0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.084509 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.084509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049295Jy sigma=0.000645 ! Fit after self-cal, rms=0.049292Jy sigma=0.000645 wmodel J1405-1440_S_2017_04_28_pus_map.mod ! Writing 36 model components to file: J1405-1440_S_2017_04_28_pus_map.mod wobs J1405-1440_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1405-1440_S_2017_04_28_pus_uvs.fits wwins J1405-1440_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1405-1440_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438607 Jy ! Component: 100 - total flux cleaned = 0.000566391 Jy ! Component: 150 - total flux cleaned = 0.000659929 Jy ! Component: 200 - total flux cleaned = 0.00072694 Jy ! Component: 250 - total flux cleaned = 0.000835068 Jy ! Component: 300 - total flux cleaned = 0.000980821 Jy ! Component: 350 - total flux cleaned = 0.00110153 Jy ! Component: 400 - total flux cleaned = 0.00121829 Jy ! Component: 450 - total flux cleaned = 0.00133101 Jy ! Component: 500 - total flux cleaned = 0.00142239 Jy ! Component: 550 - total flux cleaned = 0.00147557 Jy ! Component: 600 - total flux cleaned = 0.00147593 Jy ! Component: 650 - total flux cleaned = 0.00157749 Jy ! Component: 700 - total flux cleaned = 0.00162756 Jy ! Component: 750 - total flux cleaned = 0.0017409 Jy ! Component: 800 - total flux cleaned = 0.00175675 Jy ! Component: 850 - total flux cleaned = 0.00180358 Jy ! Component: 900 - total flux cleaned = 0.00175746 Jy ! Component: 950 - total flux cleaned = 0.00177267 Jy ! Component: 1000 - total flux cleaned = 0.00180252 Jy ! Component: 1050 - total flux cleaned = 0.00180275 Jy ! Component: 1100 - total flux cleaned = 0.00181729 Jy ! Component: 1150 - total flux cleaned = 0.00181708 Jy ! Component: 1200 - total flux cleaned = 0.00184523 Jy ! Component: 1250 - total flux cleaned = 0.00181731 Jy ! Component: 1300 - total flux cleaned = 0.00181739 Jy ! Component: 1350 - total flux cleaned = 0.00183093 Jy ! Component: 1400 - total flux cleaned = 0.00184418 Jy ! Component: 1450 - total flux cleaned = 0.00185728 Jy ! Component: 1500 - total flux cleaned = 0.00190943 Jy ! Component: 1550 - total flux cleaned = 0.00188352 Jy ! Component: 1600 - total flux cleaned = 0.00190909 Jy ! Component: 1650 - total flux cleaned = 0.00192192 Jy ! Component: 1700 - total flux cleaned = 0.0019719 Jy ! Component: 1750 - total flux cleaned = 0.00197211 Jy ! Component: 1800 - total flux cleaned = 0.00204529 Jy ! Component: 1850 - total flux cleaned = 0.00203322 Jy ! Component: 1900 - total flux cleaned = 0.00203317 Jy ! Component: 1950 - total flux cleaned = 0.00203298 Jy ! Component: 2000 - total flux cleaned = 0.00199786 Jy ! Component: 2050 - total flux cleaned = 0.00199799 Jy ! Component: 2100 - total flux cleaned = 0.00204376 Jy ! Component: 2150 - total flux cleaned = 0.00206653 Jy ! Component: 2200 - total flux cleaned = 0.00205529 Jy ! Component: 2250 - total flux cleaned = 0.00206631 Jy ! Component: 2300 - total flux cleaned = 0.00208826 Jy ! Component: 2350 - total flux cleaned = 0.00207745 Jy ! Component: 2400 - total flux cleaned = 0.00213165 Jy ! Component: 2450 - total flux cleaned = 0.00208884 Jy ! Component: 2500 - total flux cleaned = 0.00210997 Jy ! Component: 2550 - total flux cleaned = 0.00208893 Jy ! Component: 2600 - total flux cleaned = 0.002068 Jy ! Component: 2650 - total flux cleaned = 0.00203707 Jy ! Component: 2700 - total flux cleaned = 0.00200625 Jy ! Component: 2750 - total flux cleaned = 0.00201631 Jy ! Component: 2800 - total flux cleaned = 0.00201633 Jy ! Component: 2850 - total flux cleaned = 0.00197638 Jy ! Component: 2900 - total flux cleaned = 0.00196648 Jy ! Component: 2950 - total flux cleaned = 0.00192717 Jy ! Component: 3000 - total flux cleaned = 0.0019467 Jy ! Component: 3050 - total flux cleaned = 0.00193692 Jy ! Component: 3100 - total flux cleaned = 0.00189848 Jy ! Component: 3150 - total flux cleaned = 0.00186032 Jy ! Component: 3200 - total flux cleaned = 0.00183195 Jy ! Component: 3250 - total flux cleaned = 0.00183203 Jy ! Component: 3300 - total flux cleaned = 0.00183198 Jy ! Component: 3350 - total flux cleaned = 0.00182261 Jy ! Component: 3400 - total flux cleaned = 0.00178591 Jy ! Component: 3450 - total flux cleaned = 0.00177678 Jy ! Component: 3500 - total flux cleaned = 0.00175871 Jy ! Component: 3550 - total flux cleaned = 0.00170482 Jy ! Component: 3600 - total flux cleaned = 0.00168693 Jy ! Component: 3650 - total flux cleaned = 0.00164274 Jy ! Component: 3700 - total flux cleaned = 0.001634 Jy ! Component: 3750 - total flux cleaned = 0.00158173 Jy ! Component: 3800 - total flux cleaned = 0.00154702 Jy ! Component: 3850 - total flux cleaned = 0.00152981 Jy ! Component: 3900 - total flux cleaned = 0.00150417 Jy ! Component: 3950 - total flux cleaned = 0.00147874 Jy ! Component: 4000 - total flux cleaned = 0.00146178 Jy ! Component: 4050 - total flux cleaned = 0.00141149 Jy ! Total flux subtracted in 4096 components = 0.00138649 Jy ! Clean residual min=-0.000605 max=0.000452 Jy/beam ! Clean residual mean=0.000001 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.0858955 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 284 components and 0.0858955 Jy ![Exited script file: muppet] wmap "J1405-1440_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.869 x 8.241 at 0.02757 degrees (North through East) ! Clean map min=-0.0019671 max=0.08086 Jy/beam ! Writing clean map to FITS file: J1405-1440_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0808599 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146429 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.543269 0.543269 1.08654 2.17307 4.34615 8.6923 17.3846 34.7692 69.5384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.869 x 8.241 at 0.02757 degrees (North through East) ! Clean map min=-0.0019671 max=0.08086 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1405-1440_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:28:03 2019