! Started logfile: J1404+6551_S_2017_06_15_pus_uvs.log on Tue May 7 15:21:07 2019 obs J1404+6551_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1404+6551_S_2017_06_15_pus_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967111 visibilities/baseline/integration-bin. ! Found source: J1404+6551 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 26112 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1404+6551_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 781 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920583Jy sigma=0.008354 ! Fit after self-cal, rms=0.896228Jy sigma=0.008120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=3.498 mas, bpa=5.017 degrees ! Estimated noise=908.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0749126 Jy ! Component: 100 - total flux cleaned = 0.114681 Jy ! Total flux subtracted in 100 components = 0.114681 Jy ! Clean residual min=-0.012020 max=0.028929 Jy/beam ! Clean residual mean=-0.000184 rms=0.003969 Jy/beam ! Combined flux in latest and established models = 0.114681 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.114681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156233Jy sigma=0.001505 ! Fit after self-cal, rms=0.155835Jy sigma=0.001502 ! Inverting map ! Added new window around map position (-1.5, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328144 Jy ! Component: 100 - total flux cleaned = 0.0574717 Jy ! Total flux subtracted in 100 components = 0.0574717 Jy ! Clean residual min=-0.011067 max=0.024763 Jy/beam ! Clean residual mean=-0.000154 rms=0.003480 Jy/beam ! Combined flux in latest and established models = 0.172152 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 73 components and 0.172152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141337Jy sigma=0.001350 ! Fit after self-cal, rms=0.140738Jy sigma=0.001346 ! Inverting map ! Added new window around map position (67.5, 18.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259912 Jy ! Component: 100 - total flux cleaned = 0.0452402 Jy ! Total flux subtracted in 100 components = 0.0452402 Jy ! Clean residual min=-0.009939 max=0.020913 Jy/beam ! Clean residual mean=-0.000139 rms=0.003107 Jy/beam ! Combined flux in latest and established models = 0.217393 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.217393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132059Jy sigma=0.001260 ! Fit after self-cal, rms=0.131591Jy sigma=0.001256 ! Inverting map ! Added new window around map position (-8.5, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234501 Jy ! Component: 100 - total flux cleaned = 0.0411383 Jy ! Total flux subtracted in 100 components = 0.0411383 Jy ! Clean residual min=-0.009557 max=0.017321 Jy/beam ! Clean residual mean=-0.000120 rms=0.002788 Jy/beam ! Combined flux in latest and established models = 0.258531 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 107 components and 0.258531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123554Jy sigma=0.001174 ! Fit after self-cal, rms=0.122931Jy sigma=0.001169 ! Inverting map ! Added new window around map position (-4.5, -11.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185377 Jy ! Component: 100 - total flux cleaned = 0.0331432 Jy ! Total flux subtracted in 100 components = 0.0331432 Jy ! Clean residual min=-0.008692 max=0.014307 Jy/beam ! Clean residual mean=-0.000103 rms=0.002551 Jy/beam ! Combined flux in latest and established models = 0.291674 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.291674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117366Jy sigma=0.001112 ! Fit after self-cal, rms=0.117044Jy sigma=0.001109 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=4.276 mas, bpa=14.79 degrees ! Estimated noise=538.556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289432 Jy ! Component: 100 - total flux cleaned = 0.0507167 Jy ! Component: 150 - total flux cleaned = 0.0676998 Jy ! Component: 200 - total flux cleaned = 0.0813644 Jy ! Total flux subtracted in 200 components = 0.0813644 Jy ! Clean residual min=-0.013227 max=0.018517 Jy/beam ! Clean residual mean=-0.000165 rms=0.004353 Jy/beam ! Combined flux in latest and established models = 0.373038 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 158 components and 0.373039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107530Jy sigma=0.001006 ! Fit after self-cal, rms=0.107082Jy sigma=0.001002 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.16 HN 1.00 KP 1.07 ! LA 0.77 MK 0.99 NL 1.21 OV 1.52 ! PT 0.72 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.19 HN 1.04 KP 1.02 ! LA 0.75 MK 0.91 NL 1.31 OV 1.47 ! PT 0.72 SC 1.34 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.20 HN 1.09 KP 1.03 ! LA 0.77 MK 0.98 NL 1.31 OV 1.41 ! PT 0.72 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.28 HN 1.14 KP 1.00* ! LA 0.75 MK 0.86 NL 1.00* OV 1.00* ! PT 0.80 SC 1.00* ! ! ! Fit before self-cal, rms=0.107082Jy sigma=0.001002 ! Fit after self-cal, rms=0.104391Jy sigma=0.000850 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.152 mas, bmaj=4.29 mas, bpa=5.258 degrees ! Estimated noise=551.982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00877524 Jy ! Component: 100 - total flux cleaned = 0.00990804 Jy ! Component: 150 - total flux cleaned = 0.0101174 Jy ! Component: 200 - total flux cleaned = 0.0102076 Jy ! Total flux subtracted in 200 components = 0.0102076 Jy ! Clean residual min=-0.010892 max=0.010904 Jy/beam ! Clean residual mean=0.000091 rms=0.003113 Jy/beam ! Combined flux in latest and established models = 0.383246 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 175 components and 0.383246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103322Jy sigma=0.000846 ! Fit after self-cal, rms=0.104180Jy sigma=0.000842 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104180Jy sigma=0.000842 ! Fit after self-cal, rms=0.118522Jy sigma=0.000752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.171 mas, bmaj=4.398 mas, bpa=40.07 degrees ! Estimated noise=572.466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278993 Jy ! Component: 100 - total flux cleaned = 0.00322106 Jy ! Component: 150 - total flux cleaned = 0.0032283 Jy ! Component: 200 - total flux cleaned = 0.00308249 Jy ! Total flux subtracted in 200 components = 0.00308249 Jy ! Clean residual min=-0.007112 max=0.008822 Jy/beam ! Clean residual mean=-0.000045 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.386329 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 187 components and 0.386329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118077Jy sigma=0.000753 ! Fit after self-cal, rms=0.118452Jy sigma=0.000752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.86854e-05 Jy ! Component: 100 - total flux cleaned = -9.9593e-05 Jy ! Component: 150 - total flux cleaned = -3.80568e-05 Jy ! Component: 200 - total flux cleaned = -9.45565e-05 Jy ! Total flux subtracted in 200 components = -9.45565e-05 Jy ! Clean residual min=-0.007157 max=0.008744 Jy/beam ! Clean residual mean=-0.000047 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 0.386234 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 196 components and 0.386234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118310Jy sigma=0.000752 ! Fit after self-cal, rms=0.118324Jy sigma=0.000752 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118324Jy sigma=0.000752 ! Fit after self-cal, rms=0.124590Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.213 mas, bmaj=4.473 mas, bpa=43.74 degrees ! Estimated noise=589.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021524 Jy ! Component: 100 - total flux cleaned = 0.00215048 Jy ! Component: 150 - total flux cleaned = 0.00208508 Jy ! Component: 200 - total flux cleaned = 0.00202531 Jy ! Total flux subtracted in 200 components = 0.00202531 Jy ! Clean residual min=-0.007167 max=0.008909 Jy/beam ! Clean residual mean=-0.000045 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.388259 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 199 components and 0.388259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124312Jy sigma=0.000752 ! Fit after self-cal, rms=0.124369Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.3871e-05 Jy ! Component: 100 - total flux cleaned = 8.59137e-05 Jy ! Component: 150 - total flux cleaned = -2.27225e-05 Jy ! Component: 200 - total flux cleaned = -7.39595e-05 Jy ! Total flux subtracted in 200 components = -7.39595e-05 Jy ! Clean residual min=-0.007193 max=0.008934 Jy/beam ! Clean residual mean=-0.000046 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 0.388185 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 201 components and 0.388185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124258Jy sigma=0.000752 ! Fit after self-cal, rms=0.124272Jy sigma=0.000751 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124272Jy sigma=0.000751 ! Fit after self-cal, rms=0.129053Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.871 mas, bmaj=9.964 mas, bpa=61.74 degrees ! Estimated noise=702.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185593 Jy ! Component: 100 - total flux cleaned = 0.00174139 Jy ! Component: 150 - total flux cleaned = 0.00173846 Jy ! Component: 200 - total flux cleaned = 0.00165912 Jy ! Total flux subtracted in 200 components = 0.00165912 Jy ! Clean residual min=-0.009842 max=0.013926 Jy/beam ! Clean residual mean=-0.000081 rms=0.003664 Jy/beam ! Combined flux in latest and established models = 0.389845 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 209 components and 0.389844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128976Jy sigma=0.000751 ! Fit after self-cal, rms=0.128981Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.25011e-06 Jy ! Component: 100 - total flux cleaned = -7.6447e-05 Jy ! Component: 150 - total flux cleaned = -0.000142519 Jy ! Component: 200 - total flux cleaned = -0.000142555 Jy ! Total flux subtracted in 200 components = -0.000142555 Jy ! Clean residual min=-0.009857 max=0.014080 Jy/beam ! Clean residual mean=-0.000081 rms=0.003660 Jy/beam ! Combined flux in latest and established models = 0.389702 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 211 components and 0.389702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128919Jy sigma=0.000752 ! Fit after self-cal, rms=0.128931Jy sigma=0.000751 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.248 mas, bmaj=4.525 mas, bpa=46.72 degrees ! Estimated noise=604.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.248 x 4.525 at 46.72 degrees (North through East) ! Clean map min=-0.0072605 max=0.093253 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=3.64 mas, bpa=47.47 degrees ! Estimated noise=1055.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0835305 Jy ! Component: 100 - total flux cleaned = 0.135525 Jy ! Component: 150 - total flux cleaned = 0.175892 Jy ! Component: 200 - total flux cleaned = 0.208273 Jy ! Total flux subtracted in 200 components = 0.208273 Jy ! Clean residual min=-0.011778 max=0.019497 Jy/beam ! Clean residual mean=-0.000140 rms=0.003215 Jy/beam ! Combined flux in latest and established models = 0.208273 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 80 model components to the UV plane model. ! The established model now contains 80 components and 0.208273 Jy ! Inverting map and beam ! Estimated beam: bmin=4.248 mas, bmaj=4.525 mas, bpa=46.72 degrees ! Estimated noise=604.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465946 Jy ! Component: 100 - total flux cleaned = 0.0784318 Jy ! Component: 150 - total flux cleaned = 0.102139 Jy ! Component: 200 - total flux cleaned = 0.120268 Jy ! Total flux subtracted in 200 components = 0.120268 Jy ! Clean residual min=-0.009602 max=0.013534 Jy/beam ! Clean residual mean=-0.000148 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 0.328541 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 155 components and 0.328541 Jy ! Inverting map ! Added new window around map position (-14.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150505 Jy ! Component: 100 - total flux cleaned = 0.0264416 Jy ! Component: 150 - total flux cleaned = 0.0354607 Jy ! Component: 200 - total flux cleaned = 0.0426421 Jy ! Total flux subtracted in 200 components = 0.0426421 Jy ! Clean residual min=-0.007803 max=0.008854 Jy/beam ! Clean residual mean=-0.000086 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.371183 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 197 components and 0.371183 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.871 mas, bmaj=9.964 mas, bpa=61.74 degrees ! Estimated noise=702.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104669 Jy ! Component: 100 - total flux cleaned = 0.0168096 Jy ! Component: 150 - total flux cleaned = 0.0212239 Jy ! Component: 200 - total flux cleaned = 0.0238089 Jy ! Total flux subtracted in 200 components = 0.0238089 Jy ! Clean residual min=-0.010238 max=0.012460 Jy/beam ! Clean residual mean=-0.000104 rms=0.003512 Jy/beam ! Combined flux in latest and established models = 0.394992 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000632995 Jy ! Component: 100 - total flux cleaned = 0.00100862 Jy ! Component: 150 - total flux cleaned = 0.00126338 Jy ! Component: 200 - total flux cleaned = 0.00149832 Jy ! Total flux subtracted in 200 components = 0.00149832 Jy ! Clean residual min=-0.010134 max=0.012528 Jy/beam ! Clean residual mean=-0.000100 rms=0.003497 Jy/beam ! Combined flux in latest and established models = 0.39649 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 232 components and 0.39649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.248 mas, bmaj=4.525 mas, bpa=46.72 degrees ! Estimated noise=604.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171077 Jy ! Component: 100 - total flux cleaned = -0.00128598 Jy ! Component: 150 - total flux cleaned = -0.000916638 Jy ! Component: 200 - total flux cleaned = -0.00058183 Jy ! Total flux subtracted in 200 components = -0.00058183 Jy ! Clean residual min=-0.006917 max=0.008618 Jy/beam ! Clean residual mean=-0.000053 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.395909 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 247 components and 0.395909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127833Jy sigma=0.000749 ! Fit after self-cal, rms=0.127358Jy sigma=0.000746 wmodel J1404+6551_S_2017_06_15_pus_map.mod ! Writing 247 model components to file: J1404+6551_S_2017_06_15_pus_map.mod wobs J1404+6551_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1404+6551_S_2017_06_15_pus_uvs.fits wwins J1404+6551_S_2017_06_15_pus_map.win ! wwins: Wrote 6 windows to J1404+6551_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374722 Jy ! Component: 100 - total flux cleaned = 0.00668089 Jy ! Component: 150 - total flux cleaned = 0.00905519 Jy ! Component: 200 - total flux cleaned = 0.0110946 Jy ! Component: 250 - total flux cleaned = 0.0131874 Jy ! Component: 300 - total flux cleaned = 0.0146585 Jy ! Component: 350 - total flux cleaned = 0.015876 Jy ! Component: 400 - total flux cleaned = 0.016851 Jy ! Component: 450 - total flux cleaned = 0.0182308 Jy ! Component: 500 - total flux cleaned = 0.0196851 Jy ! Component: 550 - total flux cleaned = 0.0208051 Jy ! Component: 600 - total flux cleaned = 0.0218088 Jy ! Component: 650 - total flux cleaned = 0.0231879 Jy ! Component: 700 - total flux cleaned = 0.0240597 Jy ! Component: 750 - total flux cleaned = 0.0252049 Jy ! Component: 800 - total flux cleaned = 0.0261438 Jy ! Component: 850 - total flux cleaned = 0.0267922 Jy ! Component: 900 - total flux cleaned = 0.0277055 Jy ! Component: 950 - total flux cleaned = 0.0286949 Jy ! Component: 1000 - total flux cleaned = 0.0294052 Jy ! Component: 1050 - total flux cleaned = 0.030282 Jy ! Component: 1100 - total flux cleaned = 0.0308874 Jy ! Component: 1150 - total flux cleaned = 0.0318294 Jy ! Component: 1200 - total flux cleaned = 0.0323362 Jy ! Component: 1250 - total flux cleaned = 0.0330887 Jy ! Component: 1300 - total flux cleaned = 0.0335853 Jy ! Component: 1350 - total flux cleaned = 0.0340765 Jy ! Component: 1400 - total flux cleaned = 0.0345629 Jy ! Component: 1450 - total flux cleaned = 0.0350436 Jy ! Component: 1500 - total flux cleaned = 0.0353608 Jy ! Component: 1550 - total flux cleaned = 0.0357532 Jy ! Component: 1600 - total flux cleaned = 0.0362973 Jy ! Component: 1650 - total flux cleaned = 0.0363746 Jy ! Component: 1700 - total flux cleaned = 0.0367555 Jy ! Component: 1750 - total flux cleaned = 0.0370569 Jy ! Component: 1800 - total flux cleaned = 0.0372809 Jy ! Component: 1850 - total flux cleaned = 0.0377998 Jy ! Component: 1900 - total flux cleaned = 0.038093 Jy ! Component: 1950 - total flux cleaned = 0.0383856 Jy ! Component: 2000 - total flux cleaned = 0.0388901 Jy ! Component: 2050 - total flux cleaned = 0.0390352 Jy ! Component: 2100 - total flux cleaned = 0.0398848 Jy ! Component: 2150 - total flux cleaned = 0.0402353 Jy ! Component: 2200 - total flux cleaned = 0.040653 Jy ! Component: 2250 - total flux cleaned = 0.0410671 Jy ! Component: 2300 - total flux cleaned = 0.0413401 Jy ! Component: 2350 - total flux cleaned = 0.0418154 Jy ! Component: 2400 - total flux cleaned = 0.0420847 Jy ! Component: 2450 - total flux cleaned = 0.0426187 Jy ! Component: 2500 - total flux cleaned = 0.0427506 Jy ! Component: 2550 - total flux cleaned = 0.0432758 Jy ! Component: 2600 - total flux cleaned = 0.0434708 Jy ! Component: 2650 - total flux cleaned = 0.043923 Jy ! Component: 2700 - total flux cleaned = 0.0441782 Jy ! Component: 2750 - total flux cleaned = 0.0446874 Jy ! Component: 2800 - total flux cleaned = 0.0451282 Jy ! Component: 2850 - total flux cleaned = 0.0453792 Jy ! Component: 2900 - total flux cleaned = 0.0456278 Jy ! Component: 2950 - total flux cleaned = 0.0460599 Jy ! Component: 3000 - total flux cleaned = 0.0462434 Jy ! Component: 3050 - total flux cleaned = 0.0463654 Jy ! Component: 3100 - total flux cleaned = 0.0467881 Jy ! Component: 3150 - total flux cleaned = 0.0470269 Jy ! Component: 3200 - total flux cleaned = 0.0474429 Jy ! Component: 3250 - total flux cleaned = 0.0476201 Jy ! Component: 3300 - total flux cleaned = 0.0478545 Jy ! Component: 3350 - total flux cleaned = 0.0480297 Jy ! Component: 3400 - total flux cleaned = 0.0484921 Jy ! Component: 3450 - total flux cleaned = 0.0486639 Jy ! Component: 3500 - total flux cleaned = 0.0488919 Jy ! Component: 3550 - total flux cleaned = 0.0492316 Jy ! Component: 3600 - total flux cleaned = 0.0496248 Jy ! Component: 3650 - total flux cleaned = 0.0496811 Jy ! Component: 3700 - total flux cleaned = 0.0498479 Jy ! Component: 3750 - total flux cleaned = 0.0501239 Jy ! Component: 3800 - total flux cleaned = 0.0503977 Jy ! Component: 3850 - total flux cleaned = 0.0505606 Jy ! Component: 3900 - total flux cleaned = 0.0507767 Jy ! Component: 3950 - total flux cleaned = 0.051099 Jy ! Component: 4000 - total flux cleaned = 0.0512587 Jy ! Component: 4050 - total flux cleaned = 0.0514177 Jy ! Total flux subtracted in 4096 components = 0.0516289 Jy ! Clean residual min=-0.003025 max=0.002947 Jy/beam ! Clean residual mean=-0.000015 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.447538 Jy keep ! Adding 429 model components to the UV plane model. ! The established model now contains 676 components and 0.447538 Jy ![Exited script file: muppet] wmap "J1404+6551_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.248 x 4.525 at 46.72 degrees (North through East) ! Clean map min=-0.005679 max=0.096351 Jy/beam ! Writing clean map to FITS file: J1404+6551_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0963506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0011141 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.4689 3.4689 6.93781 13.8756 27.7512 55.5024 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.248 x 4.525 at 46.72 degrees (North through East) ! Clean map min=-0.005679 max=0.096351 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1404+6551_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:21:13 2019