! Started logfile: J1403+0610_S_2017_07_16_pus_uvs.log on Thu May 9 11:10:20 2019 obs J1403+0610_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1403+0610_S_2017_07_16_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.758333 visibilities/baseline/integration-bin. ! Found source: J1403+0610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 15288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1403+0610_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 816 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991095Jy sigma=0.008754 ! Fit after self-cal, rms=0.956845Jy sigma=0.008465 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=6.616 mas, bpa=-3.023 degrees ! Estimated noise=947.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352012 Jy ! Component: 100 - total flux cleaned = 0.0429025 Jy ! Total flux subtracted in 100 components = 0.0429025 Jy ! Clean residual min=-0.003081 max=0.002913 Jy/beam ! Clean residual mean=0.000001 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0429025 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0429025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079437Jy sigma=0.000657 ! Fit after self-cal, rms=0.078284Jy sigma=0.000647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.41 mas, bpa=-2.855 degrees ! Estimated noise=781.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432635 Jy ! Component: 100 - total flux cleaned = 0.00630311 Jy ! Component: 150 - total flux cleaned = 0.00736299 Jy ! Component: 200 - total flux cleaned = 0.00781698 Jy ! Total flux subtracted in 200 components = 0.00781698 Jy ! Clean residual min=-0.002500 max=0.002433 Jy/beam ! Clean residual mean=0.000000 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0507195 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 32 components and 0.0507195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078028Jy sigma=0.000645 ! Fit after self-cal, rms=0.078006Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.01 KP 0.97 ! LA 1.03 MK 1.09 NL 0.99 OV 1.12 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 0.96 ! LA 0.91 MK 1.12 NL 1.08 OV 1.06 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 1.00* HN 0.94 KP 0.99 ! LA 0.95 MK 1.14 NL 1.02 OV 0.99 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! A total of 204 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.83 KP 1.00* ! LA 0.83 MK 0.71 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.078006Jy sigma=0.000645 ! Fit after self-cal, rms=0.076346Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=7.439 mas, bpa=-1.705 degrees ! Estimated noise=793.122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.65024e-05 Jy ! Component: 100 - total flux cleaned = 2.07588e-06 Jy ! Component: 150 - total flux cleaned = 3.6584e-05 Jy ! Component: 200 - total flux cleaned = 5.29261e-05 Jy ! Total flux subtracted in 200 components = 5.29261e-05 Jy ! Clean residual min=-0.002479 max=0.002039 Jy/beam ! Clean residual mean=-0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0507724 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0507724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076338Jy sigma=0.000644 ! Fit after self-cal, rms=0.076280Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076280Jy sigma=0.000643 ! Fit after self-cal, rms=0.076672Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.427 mas, bpa=-1.648 degrees ! Estimated noise=792.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.78782e-05 Jy ! Component: 100 - total flux cleaned = -3.52308e-05 Jy ! Component: 150 - total flux cleaned = -5.87836e-06 Jy ! Component: 200 - total flux cleaned = 2.02921e-05 Jy ! Total flux subtracted in 200 components = 2.02921e-05 Jy ! Clean residual min=-0.002452 max=0.002157 Jy/beam ! Clean residual mean=0.000003 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0507927 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.0507927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076666Jy sigma=0.000642 ! Fit after self-cal, rms=0.076686Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75015e-05 Jy ! Component: 100 - total flux cleaned = 3.16304e-05 Jy ! Component: 150 - total flux cleaned = 5.83128e-05 Jy ! Component: 200 - total flux cleaned = 9.46161e-05 Jy ! Total flux subtracted in 200 components = 9.46161e-05 Jy ! Clean residual min=-0.002351 max=0.002046 Jy/beam ! Clean residual mean=0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0508873 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.0508873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076680Jy sigma=0.000642 ! Fit after self-cal, rms=0.076683Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076683Jy sigma=0.000642 ! Fit after self-cal, rms=0.077438Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.416 mas, bpa=-1.567 degrees ! Estimated noise=794.582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.06214e-05 Jy ! Component: 100 - total flux cleaned = 0.000110647 Jy ! Component: 150 - total flux cleaned = 0.000147747 Jy ! Component: 200 - total flux cleaned = 0.00018224 Jy ! Total flux subtracted in 200 components = 0.00018224 Jy ! Clean residual min=-0.002382 max=0.002135 Jy/beam ! Clean residual mean=0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0510696 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.0510696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077433Jy sigma=0.000642 ! Fit after self-cal, rms=0.077480Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.4894e-05 Jy ! Component: 100 - total flux cleaned = -3.46076e-05 Jy ! Component: 150 - total flux cleaned = -2.43986e-05 Jy ! Component: 200 - total flux cleaned = 6.16122e-06 Jy ! Total flux subtracted in 200 components = 6.16122e-06 Jy ! Clean residual min=-0.002330 max=0.002134 Jy/beam ! Clean residual mean=0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0510757 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0510757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077476Jy sigma=0.000641 ! Fit after self-cal, rms=0.077477Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077477Jy sigma=0.000641 ! Fit after self-cal, rms=0.077730Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.991 mas, bmaj=11.83 mas, bpa=-5.512 degrees ! Estimated noise=1019.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780185 Jy ! Component: 100 - total flux cleaned = 0.0010644 Jy ! Component: 150 - total flux cleaned = 0.00110992 Jy ! Component: 200 - total flux cleaned = 0.00114102 Jy ! Total flux subtracted in 200 components = 0.00114102 Jy ! Clean residual min=-0.002204 max=0.002471 Jy/beam ! Clean residual mean=0.000006 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0522167 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.0522167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077733Jy sigma=0.000641 ! Fit after self-cal, rms=0.077750Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141094 Jy ! Component: 100 - total flux cleaned = 0.000169116 Jy ! Component: 150 - total flux cleaned = 0.000193214 Jy ! Component: 200 - total flux cleaned = 0.00022315 Jy ! Total flux subtracted in 200 components = 0.00022315 Jy ! Clean residual min=-0.002197 max=0.002461 Jy/beam ! Clean residual mean=0.000006 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0524399 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.0524399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077752Jy sigma=0.000641 ! Fit after self-cal, rms=0.077753Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=7.401 mas, bpa=-1.459 degrees ! Estimated noise=795.492 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 7.401 at -1.459 degrees (North through East) ! Clean map min=-0.0022265 max=0.047067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=6.591 mas, bpa=-1.514 degrees ! Estimated noise=973.406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036197 Jy ! Component: 100 - total flux cleaned = 0.0442655 Jy ! Component: 150 - total flux cleaned = 0.0474086 Jy ! Component: 200 - total flux cleaned = 0.0487382 Jy ! Total flux subtracted in 200 components = 0.0487382 Jy ! Clean residual min=-0.003179 max=0.002630 Jy/beam ! Clean residual mean=0.000001 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0487382 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0487382 Jy ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=7.401 mas, bpa=-1.459 degrees ! Estimated noise=795.492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017596 Jy ! Component: 100 - total flux cleaned = 0.0023162 Jy ! Component: 150 - total flux cleaned = 0.00240623 Jy ! Component: 200 - total flux cleaned = 0.00245993 Jy ! Total flux subtracted in 200 components = 0.00245993 Jy ! Clean residual min=-0.002391 max=0.002208 Jy/beam ! Clean residual mean=0.000003 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0511981 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0511981 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.991 mas, bmaj=11.83 mas, bpa=-5.512 degrees ! Estimated noise=1019.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000992995 Jy ! Component: 100 - total flux cleaned = 0.00122037 Jy ! Component: 150 - total flux cleaned = 0.00126781 Jy ! Component: 200 - total flux cleaned = 0.0012869 Jy ! Total flux subtracted in 200 components = 0.0012869 Jy ! Clean residual min=-0.002210 max=0.002448 Jy/beam ! Clean residual mean=0.000006 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.052485 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35779e-06 Jy ! Component: 100 - total flux cleaned = 2.53899e-05 Jy ! Component: 150 - total flux cleaned = 3.36232e-05 Jy ! Component: 200 - total flux cleaned = 4.14512e-05 Jy ! Total flux subtracted in 200 components = 4.14512e-05 Jy ! Clean residual min=-0.002200 max=0.002443 Jy/beam ! Clean residual mean=0.000006 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0525264 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0525264 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=7.401 mas, bpa=-1.459 degrees ! Estimated noise=795.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000546754 Jy ! Component: 100 - total flux cleaned = -0.000725095 Jy ! Component: 150 - total flux cleaned = -0.000836078 Jy ! Component: 200 - total flux cleaned = -0.000864687 Jy ! Total flux subtracted in 200 components = -0.000864687 Jy ! Clean residual min=-0.002356 max=0.002141 Jy/beam ! Clean residual mean=0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0516618 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.0516618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077752Jy sigma=0.000641 ! Fit after self-cal, rms=0.077753Jy sigma=0.000641 wmodel J1403+0610_S_2017_07_16_pus_map.mod ! Writing 45 model components to file: J1403+0610_S_2017_07_16_pus_map.mod wobs J1403+0610_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1403+0610_S_2017_07_16_pus_uvs.fits wwins J1403+0610_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1403+0610_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522829 Jy ! Component: 100 - total flux cleaned = -0.000561624 Jy ! Component: 150 - total flux cleaned = -0.000736971 Jy ! Component: 200 - total flux cleaned = -0.000905176 Jy ! Component: 250 - total flux cleaned = -0.000970204 Jy ! Component: 300 - total flux cleaned = -0.00100101 Jy ! Component: 350 - total flux cleaned = -0.00103076 Jy ! Component: 400 - total flux cleaned = -0.00103017 Jy ! Component: 450 - total flux cleaned = -0.00108705 Jy ! Component: 500 - total flux cleaned = -0.00105865 Jy ! Component: 550 - total flux cleaned = -0.00111353 Jy ! Component: 600 - total flux cleaned = -0.00116668 Jy ! Component: 650 - total flux cleaned = -0.00119287 Jy ! Component: 700 - total flux cleaned = -0.00126922 Jy ! Component: 750 - total flux cleaned = -0.00129337 Jy ! Component: 800 - total flux cleaned = -0.00126881 Jy ! Component: 850 - total flux cleaned = -0.0012692 Jy ! Component: 900 - total flux cleaned = -0.00136364 Jy ! Component: 950 - total flux cleaned = -0.00147866 Jy ! Component: 1000 - total flux cleaned = -0.00147837 Jy ! Component: 1050 - total flux cleaned = -0.00154553 Jy ! Component: 1100 - total flux cleaned = -0.00158952 Jy ! Component: 1150 - total flux cleaned = -0.00167574 Jy ! Component: 1200 - total flux cleaned = -0.00167552 Jy ! Component: 1250 - total flux cleaned = -0.00169605 Jy ! Component: 1300 - total flux cleaned = -0.00165434 Jy ! Component: 1350 - total flux cleaned = -0.00171549 Jy ! Component: 1400 - total flux cleaned = -0.00169532 Jy ! Component: 1450 - total flux cleaned = -0.00165586 Jy ! Component: 1500 - total flux cleaned = -0.00163681 Jy ! Component: 1550 - total flux cleaned = -0.0016754 Jy ! Component: 1600 - total flux cleaned = -0.00167562 Jy ! Component: 1650 - total flux cleaned = -0.00169456 Jy ! Component: 1700 - total flux cleaned = -0.00175007 Jy ! Component: 1750 - total flux cleaned = -0.00171331 Jy ! Component: 1800 - total flux cleaned = -0.00165921 Jy ! Component: 1850 - total flux cleaned = -0.00164169 Jy ! Component: 1900 - total flux cleaned = -0.00160666 Jy ! Component: 1950 - total flux cleaned = -0.00153751 Jy ! Component: 2000 - total flux cleaned = -0.00155507 Jy ! Component: 2050 - total flux cleaned = -0.00150427 Jy ! Component: 2100 - total flux cleaned = -0.00152105 Jy ! Component: 2150 - total flux cleaned = -0.0014544 Jy ! Component: 2200 - total flux cleaned = -0.00147048 Jy ! Component: 2250 - total flux cleaned = -0.00138871 Jy ! Component: 2300 - total flux cleaned = -0.00134036 Jy ! Component: 2350 - total flux cleaned = -0.00126048 Jy ! Component: 2400 - total flux cleaned = -0.00114944 Jy ! Component: 2450 - total flux cleaned = -0.00108665 Jy ! Component: 2500 - total flux cleaned = -0.00105579 Jy ! Component: 2550 - total flux cleaned = -0.00102508 Jy ! Component: 2600 - total flux cleaned = -0.000918147 Jy ! Component: 2650 - total flux cleaned = -0.000887659 Jy ! Component: 2700 - total flux cleaned = -0.000887456 Jy ! Component: 2750 - total flux cleaned = -0.000783149 Jy ! Component: 2800 - total flux cleaned = -0.000797868 Jy ! Component: 2850 - total flux cleaned = -0.000724782 Jy ! Component: 2900 - total flux cleaned = -0.00068128 Jy ! Component: 2950 - total flux cleaned = -0.000609357 Jy ! Component: 3000 - total flux cleaned = -0.000566448 Jy ! Component: 3050 - total flux cleaned = -0.000467373 Jy ! Component: 3100 - total flux cleaned = -0.000425193 Jy ! Component: 3150 - total flux cleaned = -0.000369562 Jy ! Component: 3200 - total flux cleaned = -0.0003004 Jy ! Component: 3250 - total flux cleaned = -0.000218156 Jy ! Component: 3300 - total flux cleaned = -0.000177519 Jy ! Component: 3350 - total flux cleaned = -0.000163955 Jy ! Component: 3400 - total flux cleaned = -0.000110494 Jy ! Component: 3450 - total flux cleaned = -0.000123674 Jy ! Component: 3500 - total flux cleaned = -3.10103e-05 Jy ! Component: 3550 - total flux cleaned = 3.46529e-05 Jy ! Component: 3600 - total flux cleaned = 6.07695e-05 Jy ! Component: 3650 - total flux cleaned = 0.000112713 Jy ! Component: 3700 - total flux cleaned = 0.000177044 Jy ! Component: 3750 - total flux cleaned = 0.000176894 Jy ! Component: 3800 - total flux cleaned = 0.000291165 Jy ! Component: 3850 - total flux cleaned = 0.000341656 Jy ! Component: 3900 - total flux cleaned = 0.000341599 Jy ! Component: 3950 - total flux cleaned = 0.000391565 Jy ! Component: 4000 - total flux cleaned = 0.000490541 Jy ! Component: 4050 - total flux cleaned = 0.000527416 Jy ! Total flux subtracted in 4096 components = 0.000564007 Jy ! Clean residual min=-0.000741 max=0.000647 Jy/beam ! Clean residual mean=0.000001 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.0522258 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 325 components and 0.0522258 Jy ![Exited script file: muppet] wmap "J1403+0610_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 7.401 at -1.459 degrees (North through East) ! Clean map min=-0.0015752 max=0.047075 Jy/beam ! Writing clean map to FITS file: J1403+0610_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0470752 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223411 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42375 1.42375 2.84749 5.69499 11.39 22.7799 45.5599 91.1198 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 7.401 at -1.459 degrees (North through East) ! Clean map min=-0.0015752 max=0.047075 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1403+0610_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:10:24 2019