! Started logfile: J1402-1840_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:53 2019 obs J1402-1840_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1402-1840_S_2017_04_28_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789352 visibilities/baseline/integration-bin. ! Found source: J1402-1840 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1402-1840_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 492 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.784126Jy sigma=0.020811 ! Fit after self-cal, rms=0.769222Jy sigma=0.020642 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=6.583 mas, bpa=-5.905 degrees ! Estimated noise=1446.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15909 Jy ! Component: 100 - total flux cleaned = 0.192454 Jy ! Total flux subtracted in 100 components = 0.192454 Jy ! Clean residual min=-0.035175 max=0.047206 Jy/beam ! Clean residual mean=0.000068 rms=0.011260 Jy/beam ! Combined flux in latest and established models = 0.192454 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.192454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220301Jy sigma=0.003820 ! Fit after self-cal, rms=0.220204Jy sigma=0.003812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.991 mas, bmaj=8.324 mas, bpa=-2.393 degrees ! Estimated noise=757.604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0150696 Jy ! Component: 100 - total flux cleaned = -0.0161527 Jy ! Component: 150 - total flux cleaned = -0.0179483 Jy ! Component: 200 - total flux cleaned = -0.0192596 Jy ! Total flux subtracted in 200 components = -0.0192596 Jy ! Clean residual min=-0.036926 max=0.049903 Jy/beam ! Clean residual mean=0.000116 rms=0.011515 Jy/beam ! Combined flux in latest and established models = 0.173194 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.173194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221621Jy sigma=0.003591 ! Fit after self-cal, rms=0.221566Jy sigma=0.003591 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.84 HN 0.93 KP 0.82 ! LA 0.79 MK 0.84 NL 0.77 OV 0.82 ! PT 0.86 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.77 HN 1.00 KP 0.77 ! LA 0.75 MK 0.89 NL 0.93 OV 0.85 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.80 HN 0.97 KP 0.82 ! LA 0.79 MK 0.88 NL 0.88 OV 0.77 ! PT 0.88 SC 1.04 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.83 HN 0.97 KP 1.00* ! LA 23.76 MK 1.23 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.221566Jy sigma=0.003591 ! Fit after self-cal, rms=4.114718Jy sigma=0.000701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=8.076 mas, bpa=-0.2822 degrees ! Estimated noise=752.936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353025 Jy ! Component: 100 - total flux cleaned = 0.00391951 Jy ! Component: 150 - total flux cleaned = 0.00386333 Jy ! Component: 200 - total flux cleaned = 0.00386583 Jy ! Total flux subtracted in 200 components = 0.00386583 Jy ! Clean residual min=-0.005308 max=0.004641 Jy/beam ! Clean residual mean=-0.000007 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.17706 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.17706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.114587Jy sigma=0.000700 ! Fit after self-cal, rms=4.114734Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.114734Jy sigma=0.000692 ! Fit after self-cal, rms=6.591676Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.068 mas, bpa=-0.706 degrees ! Estimated noise=760.465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319438 Jy ! Component: 100 - total flux cleaned = 0.0044746 Jy ! Component: 150 - total flux cleaned = 0.00469464 Jy ! Component: 200 - total flux cleaned = 0.00488056 Jy ! Total flux subtracted in 200 components = 0.00488056 Jy ! Clean residual min=-0.003522 max=0.003197 Jy/beam ! Clean residual mean=-0.000003 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.181941 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.181941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.591449Jy sigma=0.000682 ! Fit after self-cal, rms=6.591485Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.64761e-05 Jy ! Component: 100 - total flux cleaned = 0.000212176 Jy ! Component: 150 - total flux cleaned = 0.000288804 Jy ! Component: 200 - total flux cleaned = 0.000335892 Jy ! Total flux subtracted in 200 components = 0.000335892 Jy ! Clean residual min=-0.003468 max=0.003184 Jy/beam ! Clean residual mean=-0.000003 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.182277 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.182277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.591469Jy sigma=0.000682 ! Fit after self-cal, rms=6.591470Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.591470Jy sigma=0.000682 ! Fit after self-cal, rms=6.757598Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=8.026 mas, bpa=-0.7181 degrees ! Estimated noise=768.478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261891 Jy ! Component: 100 - total flux cleaned = 0.00398297 Jy ! Component: 150 - total flux cleaned = 0.00460302 Jy ! Component: 200 - total flux cleaned = 0.00471679 Jy ! Total flux subtracted in 200 components = 0.00471679 Jy ! Clean residual min=-0.003340 max=0.003019 Jy/beam ! Clean residual mean=-0.000003 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.186993 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.186993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.757380Jy sigma=0.000681 ! Fit after self-cal, rms=6.757377Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.73147e-05 Jy ! Component: 100 - total flux cleaned = 0.000108961 Jy ! Component: 150 - total flux cleaned = 0.000147315 Jy ! Component: 200 - total flux cleaned = 0.000184628 Jy ! Total flux subtracted in 200 components = 0.000184628 Jy ! Clean residual min=-0.003327 max=0.003015 Jy/beam ! Clean residual mean=-0.000003 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.187178 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.187178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.757370Jy sigma=0.000681 ! Fit after self-cal, rms=6.757371Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.757371Jy sigma=0.000681 ! Fit after self-cal, rms=6.878370Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.806 mas, bmaj=15.47 mas, bpa=3.006 degrees ! Estimated noise=891.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301146 Jy ! Component: 100 - total flux cleaned = 0.00403908 Jy ! Component: 150 - total flux cleaned = 0.0044312 Jy ! Component: 200 - total flux cleaned = 0.0045181 Jy ! Total flux subtracted in 200 components = 0.0045181 Jy ! Clean residual min=-0.003708 max=0.003352 Jy/beam ! Clean residual mean=-0.000007 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.191696 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.191696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.878111Jy sigma=0.000681 ! Fit after self-cal, rms=6.878116Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106348 Jy ! Component: 100 - total flux cleaned = 9.58819e-05 Jy ! Component: 150 - total flux cleaned = 9.59513e-05 Jy ! Component: 200 - total flux cleaned = 0.000103244 Jy ! Total flux subtracted in 200 components = 0.000103244 Jy ! Clean residual min=-0.003716 max=0.003356 Jy/beam ! Clean residual mean=-0.000007 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.191799 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.191799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.878106Jy sigma=0.000681 ! Fit after self-cal, rms=6.878106Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=7.987 mas, bpa=-0.6516 degrees ! Estimated noise=776.527 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 7.987 at -0.6516 degrees (North through East) ! Clean map min=-0.0030514 max=0.19849 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=6.447 mas, bpa=-3.862 degrees ! Estimated noise=1394.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154123 Jy ! Component: 100 - total flux cleaned = 0.187888 Jy ! Component: 150 - total flux cleaned = 0.193522 Jy ! Component: 200 - total flux cleaned = 0.19303 Jy ! Total flux subtracted in 200 components = 0.19303 Jy ! Clean residual min=-0.004380 max=0.004144 Jy/beam ! Clean residual mean=0.000001 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.19303 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.19303 Jy ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=7.987 mas, bpa=-0.6516 degrees ! Estimated noise=776.527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.93644e-05 Jy ! Component: 100 - total flux cleaned = -0.000322204 Jy ! Component: 150 - total flux cleaned = -0.000545405 Jy ! Component: 200 - total flux cleaned = -0.000733604 Jy ! Total flux subtracted in 200 components = -0.000733604 Jy ! Clean residual min=-0.003419 max=0.003021 Jy/beam ! Clean residual mean=-0.000003 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.192297 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.192296 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.806 mas, bmaj=15.47 mas, bpa=3.006 degrees ! Estimated noise=891.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.68853e-05 Jy ! Component: 100 - total flux cleaned = -4.83281e-05 Jy ! Component: 150 - total flux cleaned = -0.00011732 Jy ! Component: 200 - total flux cleaned = -0.000174514 Jy ! Total flux subtracted in 200 components = -0.000174514 Jy ! Clean residual min=-0.003693 max=0.003375 Jy/beam ! Clean residual mean=-0.000007 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.192122 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.65846e-05 Jy ! Component: 100 - total flux cleaned = -0.000111315 Jy ! Component: 150 - total flux cleaned = -0.000138932 Jy ! Component: 200 - total flux cleaned = -0.000176934 Jy ! Total flux subtracted in 200 components = -0.000176934 Jy ! Clean residual min=-0.003710 max=0.003378 Jy/beam ! Clean residual mean=-0.000007 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.191945 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.191945 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=7.987 mas, bpa=-0.6516 degrees ! Estimated noise=776.527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018295 Jy ! Component: 100 - total flux cleaned = -0.000143391 Jy ! Component: 150 - total flux cleaned = -0.000142021 Jy ! Component: 200 - total flux cleaned = -0.000109568 Jy ! Total flux subtracted in 200 components = -0.000109568 Jy ! Clean residual min=-0.003326 max=0.002948 Jy/beam ! Clean residual mean=-0.000003 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.191835 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.191835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.878147Jy sigma=0.000681 ! Fit after self-cal, rms=6.878143Jy sigma=0.000681 wmodel J1402-1840_S_2017_04_28_pus_map.mod ! Writing 35 model components to file: J1402-1840_S_2017_04_28_pus_map.mod wobs J1402-1840_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1402-1840_S_2017_04_28_pus_uvs.fits wwins J1402-1840_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1402-1840_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547558 Jy ! Component: 100 - total flux cleaned = -0.000495585 Jy ! Component: 150 - total flux cleaned = -0.00021366 Jy ! Component: 200 - total flux cleaned = -3.4972e-05 Jy ! Component: 250 - total flux cleaned = 9.3741e-05 Jy ! Component: 300 - total flux cleaned = 0.000301389 Jy ! Component: 350 - total flux cleaned = 0.000381947 Jy ! Component: 400 - total flux cleaned = 0.000421075 Jy ! Component: 450 - total flux cleaned = 0.00042 Jy ! Component: 500 - total flux cleaned = 0.000344171 Jy ! Component: 550 - total flux cleaned = 0.000270378 Jy ! Component: 600 - total flux cleaned = 0.000270991 Jy ! Component: 650 - total flux cleaned = 0.000270333 Jy ! Component: 700 - total flux cleaned = 0.000374686 Jy ! Component: 750 - total flux cleaned = 0.000442595 Jy ! Component: 800 - total flux cleaned = 0.000542873 Jy ! Component: 850 - total flux cleaned = 0.000475996 Jy ! Component: 900 - total flux cleaned = 0.000573414 Jy ! Component: 950 - total flux cleaned = 0.000765544 Jy ! Component: 1000 - total flux cleaned = 0.000828416 Jy ! Component: 1050 - total flux cleaned = 0.0008594 Jy ! Component: 1100 - total flux cleaned = 0.000982339 Jy ! Component: 1150 - total flux cleaned = 0.00110439 Jy ! Component: 1200 - total flux cleaned = 0.00125392 Jy ! Component: 1250 - total flux cleaned = 0.00140169 Jy ! Component: 1300 - total flux cleaned = 0.00146001 Jy ! Component: 1350 - total flux cleaned = 0.00154641 Jy ! Component: 1400 - total flux cleaned = 0.00171765 Jy ! Component: 1450 - total flux cleaned = 0.00168967 Jy ! Component: 1500 - total flux cleaned = 0.00171778 Jy ! Component: 1550 - total flux cleaned = 0.00180096 Jy ! Component: 1600 - total flux cleaned = 0.00174635 Jy ! Component: 1650 - total flux cleaned = 0.00188163 Jy ! Component: 1700 - total flux cleaned = 0.00190843 Jy ! Component: 1750 - total flux cleaned = 0.00196119 Jy ! Component: 1800 - total flux cleaned = 0.00201366 Jy ! Component: 1850 - total flux cleaned = 0.0021179 Jy ! Component: 1900 - total flux cleaned = 0.00224668 Jy ! Component: 1950 - total flux cleaned = 0.00224608 Jy ! Component: 2000 - total flux cleaned = 0.00219545 Jy ! Component: 2050 - total flux cleaned = 0.00229652 Jy ! Component: 2100 - total flux cleaned = 0.00227144 Jy ! Component: 2150 - total flux cleaned = 0.00224688 Jy ! Component: 2200 - total flux cleaned = 0.00224683 Jy ! Component: 2250 - total flux cleaned = 0.00224701 Jy ! Component: 2300 - total flux cleaned = 0.00229551 Jy ! Component: 2350 - total flux cleaned = 0.00224705 Jy ! Component: 2400 - total flux cleaned = 0.00222301 Jy ! Component: 2450 - total flux cleaned = 0.0021755 Jy ! Component: 2500 - total flux cleaned = 0.00215193 Jy ! Component: 2550 - total flux cleaned = 0.00215184 Jy ! Component: 2600 - total flux cleaned = 0.00210526 Jy ! Component: 2650 - total flux cleaned = 0.00205898 Jy ! Component: 2700 - total flux cleaned = 0.00201287 Jy ! Component: 2750 - total flux cleaned = 0.00199006 Jy ! Component: 2800 - total flux cleaned = 0.00196726 Jy ! Component: 2850 - total flux cleaned = 0.00183165 Jy ! Component: 2900 - total flux cleaned = 0.00185432 Jy ! Component: 2950 - total flux cleaned = 0.00180948 Jy ! Component: 3000 - total flux cleaned = 0.00180953 Jy ! Component: 3050 - total flux cleaned = 0.00176503 Jy ! Component: 3100 - total flux cleaned = 0.00161051 Jy ! Component: 3150 - total flux cleaned = 0.00161051 Jy ! Component: 3200 - total flux cleaned = 0.00147941 Jy ! Component: 3250 - total flux cleaned = 0.00139262 Jy ! Component: 3300 - total flux cleaned = 0.00130605 Jy ! Component: 3350 - total flux cleaned = 0.00115545 Jy ! Component: 3400 - total flux cleaned = 0.00111274 Jy ! Component: 3450 - total flux cleaned = 0.000984609 Jy ! Component: 3500 - total flux cleaned = 0.000899607 Jy ! Component: 3550 - total flux cleaned = 0.000814879 Jy ! Component: 3600 - total flux cleaned = 0.000688464 Jy ! Component: 3650 - total flux cleaned = 0.000688469 Jy ! Component: 3700 - total flux cleaned = 0.000584089 Jy ! Component: 3750 - total flux cleaned = 0.000584044 Jy ! Component: 3800 - total flux cleaned = 0.000397271 Jy ! Component: 3850 - total flux cleaned = 0.000273366 Jy ! Component: 3900 - total flux cleaned = 0.00014987 Jy ! Component: 3950 - total flux cleaned = 0.000149977 Jy ! Component: 4000 - total flux cleaned = 2.74481e-05 Jy ! Component: 4050 - total flux cleaned = -1.31962e-05 Jy ! Total flux subtracted in 4096 components = -9.43493e-05 Jy ! Clean residual min=-0.001205 max=0.001287 Jy/beam ! Clean residual mean=-0.000003 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.191741 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 357 components and 0.191741 Jy ![Exited script file: muppet] wmap "J1402-1840_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 7.987 at -0.6516 degrees (North through East) ! Clean map min=-0.0028285 max=0.19887 Jy/beam ! Writing clean map to FITS file: J1402-1840_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.198869 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000393401 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.593459 0.593459 1.18692 2.37383 4.74767 9.49534 18.9907 37.9813 75.9627 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.198 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 7.987 at -0.6516 degrees (North through East) ! Clean map min=-0.0028285 max=0.19887 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1402-1840_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:58 2019