! Started logfile: J1402-1825_S_2017_10_21_pus_uvs.log on Sat May 11 20:59:22 2019 obs J1402-1825_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1402-1825_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.941744 visibilities/baseline/integration-bin. ! Found source: J1402-1825 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 19528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1402-1825_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 694 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995797Jy sigma=0.008314 ! Fit after self-cal, rms=0.929122Jy sigma=0.007787 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=14.26 mas, bpa=-20.66 degrees ! Estimated noise=1272.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556316 Jy ! Component: 100 - total flux cleaned = 0.0691999 Jy ! Total flux subtracted in 100 components = 0.0691999 Jy ! Clean residual min=-0.004230 max=0.005156 Jy/beam ! Clean residual mean=-0.000006 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.0691999 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0691999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094285Jy sigma=0.000730 ! Fit after self-cal, rms=0.093573Jy sigma=0.000724 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=16.54 mas, bpa=-20.6 degrees ! Estimated noise=731.845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00761795 Jy ! Component: 100 - total flux cleaned = 0.0110075 Jy ! Component: 150 - total flux cleaned = 0.0131179 Jy ! Component: 200 - total flux cleaned = 0.0145465 Jy ! Total flux subtracted in 200 components = 0.0145465 Jy ! Clean residual min=-0.003034 max=0.003342 Jy/beam ! Clean residual mean=0.000006 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.0837464 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 59 components and 0.0837464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092876Jy sigma=0.000720 ! Fit after self-cal, rms=0.092862Jy sigma=0.000720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.03 KP 1.18 ! LA 1.07 MK 1.02 NL 0.91 OV 1.00 ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.99 KP 1.08 ! LA 1.00 MK 0.98 NL 1.04 OV 1.02 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.03 KP 1.07 ! LA 0.78 MK 1.09 NL 1.13 OV 0.93 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.84 KP 1.00* ! LA 0.77 MK 1.00 NL 1.00* OV 1.00* ! PT 0.79 ! ! ! Fit before self-cal, rms=0.092862Jy sigma=0.000720 ! Fit after self-cal, rms=0.090155Jy sigma=0.000716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=16.56 mas, bpa=-20.55 degrees ! Estimated noise=734.998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197636 Jy ! Component: 100 - total flux cleaned = 0.000150722 Jy ! Component: 150 - total flux cleaned = 0.000149877 Jy ! Component: 200 - total flux cleaned = 0.000149616 Jy ! Total flux subtracted in 200 components = 0.000149616 Jy ! Clean residual min=-0.001906 max=0.001828 Jy/beam ! Clean residual mean=0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.083896 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.083896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090144Jy sigma=0.000716 ! Fit after self-cal, rms=0.090165Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090165Jy sigma=0.000715 ! Fit after self-cal, rms=0.090134Jy sigma=0.000715 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=16.59 mas, bpa=-20.42 degrees ! Estimated noise=735.076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204299 Jy ! Component: 100 - total flux cleaned = 0.000309285 Jy ! Component: 150 - total flux cleaned = 0.000339623 Jy ! Component: 200 - total flux cleaned = 0.000340261 Jy ! Total flux subtracted in 200 components = 0.000340261 Jy ! Clean residual min=-0.002156 max=0.001672 Jy/beam ! Clean residual mean=0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0842362 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.0842362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090127Jy sigma=0.000714 ! Fit after self-cal, rms=0.090169Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135026 Jy ! Component: 100 - total flux cleaned = 0.000148359 Jy ! Component: 150 - total flux cleaned = 0.000148712 Jy ! Component: 200 - total flux cleaned = 0.000128748 Jy ! Total flux subtracted in 200 components = 0.000128748 Jy ! Clean residual min=-0.002118 max=0.001689 Jy/beam ! Clean residual mean=0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.084365 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 0.084365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090166Jy sigma=0.000714 ! Fit after self-cal, rms=0.090168Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090168Jy sigma=0.000714 ! Fit after self-cal, rms=0.090503Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=16.61 mas, bpa=-20.34 degrees ! Estimated noise=736.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237209 Jy ! Component: 100 - total flux cleaned = 0.000276074 Jy ! Component: 150 - total flux cleaned = 0.000275395 Jy ! Component: 200 - total flux cleaned = 0.000264692 Jy ! Total flux subtracted in 200 components = 0.000264692 Jy ! Clean residual min=-0.002177 max=0.001710 Jy/beam ! Clean residual mean=-0.000000 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0846297 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 93 components and 0.0846297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090499Jy sigma=0.000714 ! Fit after self-cal, rms=0.090523Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.78085e-05 Jy ! Component: 100 - total flux cleaned = 5.79473e-05 Jy ! Component: 150 - total flux cleaned = 3.97143e-05 Jy ! Component: 200 - total flux cleaned = 3.11256e-05 Jy ! Total flux subtracted in 200 components = 3.11256e-05 Jy ! Clean residual min=-0.002155 max=0.001690 Jy/beam ! Clean residual mean=0.000000 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0846608 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.0846608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090520Jy sigma=0.000714 ! Fit after self-cal, rms=0.090522Jy sigma=0.000714 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090522Jy sigma=0.000714 ! Fit after self-cal, rms=0.090669Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.585 mas, bmaj=23.97 mas, bpa=-11.98 degrees ! Estimated noise=902.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.15413e-05 Jy ! Component: 100 - total flux cleaned = 3.8011e-05 Jy ! Component: 150 - total flux cleaned = 3.88331e-05 Jy ! Component: 200 - total flux cleaned = 3.86325e-05 Jy ! Total flux subtracted in 200 components = 3.86325e-05 Jy ! Clean residual min=-0.002302 max=0.002269 Jy/beam ! Clean residual mean=-0.000003 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0846995 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.0846995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090668Jy sigma=0.000714 ! Fit after self-cal, rms=0.090673Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.2725e-05 Jy ! Component: 100 - total flux cleaned = -1.87223e-05 Jy ! Component: 150 - total flux cleaned = -1.27915e-05 Jy ! Component: 200 - total flux cleaned = -1.77094e-06 Jy ! Total flux subtracted in 200 components = -1.77094e-06 Jy ! Clean residual min=-0.002302 max=0.002271 Jy/beam ! Clean residual mean=-0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0846977 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 110 components and 0.0846977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090673Jy sigma=0.000714 ! Fit after self-cal, rms=0.090674Jy sigma=0.000714 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=16.62 mas, bpa=-20.29 degrees ! Estimated noise=737.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 16.62 at -20.29 degrees (North through East) ! Clean map min=-0.0021118 max=0.072664 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=14.37 mas, bpa=-20.2 degrees ! Estimated noise=1290.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564479 Jy ! Component: 100 - total flux cleaned = 0.0700198 Jy ! Component: 150 - total flux cleaned = 0.0757114 Jy ! Component: 200 - total flux cleaned = 0.0790182 Jy ! Total flux subtracted in 200 components = 0.0790182 Jy ! Clean residual min=-0.003423 max=0.003251 Jy/beam ! Clean residual mean=0.000003 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.0790182 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0790182 Jy ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=16.62 mas, bpa=-20.29 degrees ! Estimated noise=737.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263217 Jy ! Component: 100 - total flux cleaned = 0.00403324 Jy ! Component: 150 - total flux cleaned = 0.00464105 Jy ! Component: 200 - total flux cleaned = 0.00490695 Jy ! Total flux subtracted in 200 components = 0.00490695 Jy ! Clean residual min=-0.002087 max=0.001711 Jy/beam ! Clean residual mean=-0.000000 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0839252 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.0839252 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.585 mas, bmaj=23.97 mas, bpa=-11.98 degrees ! Estimated noise=902.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526381 Jy ! Component: 100 - total flux cleaned = 0.000586262 Jy ! Component: 150 - total flux cleaned = 0.000605564 Jy ! Component: 200 - total flux cleaned = 0.000622038 Jy ! Total flux subtracted in 200 components = 0.000622038 Jy ! Clean residual min=-0.002308 max=0.002267 Jy/beam ! Clean residual mean=-0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0845472 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.6377e-06 Jy ! Component: 100 - total flux cleaned = 1.47582e-05 Jy ! Component: 150 - total flux cleaned = 2.80992e-05 Jy ! Component: 200 - total flux cleaned = 3.41862e-05 Jy ! Total flux subtracted in 200 components = 3.41862e-05 Jy ! Clean residual min=-0.002299 max=0.002265 Jy/beam ! Clean residual mean=-0.000002 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0845814 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.0845814 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=16.62 mas, bpa=-20.29 degrees ! Estimated noise=737.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120969 Jy ! Component: 100 - total flux cleaned = 0.000120331 Jy ! Component: 150 - total flux cleaned = 0.000104065 Jy ! Component: 200 - total flux cleaned = 0.000104351 Jy ! Total flux subtracted in 200 components = 0.000104351 Jy ! Clean residual min=-0.002064 max=0.001712 Jy/beam ! Clean residual mean=-0.000000 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0846857 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.0846857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090679Jy sigma=0.000714 ! Fit after self-cal, rms=0.090675Jy sigma=0.000714 wmodel J1402-1825_S_2017_10_21_pus_map.mod ! Writing 65 model components to file: J1402-1825_S_2017_10_21_pus_map.mod wobs J1402-1825_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1402-1825_S_2017_10_21_pus_uvs.fits wwins J1402-1825_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1402-1825_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000622519 Jy ! Component: 100 - total flux cleaned = -0.000810212 Jy ! Component: 150 - total flux cleaned = -0.000840451 Jy ! Component: 200 - total flux cleaned = -0.000758383 Jy ! Component: 250 - total flux cleaned = -0.000758882 Jy ! Component: 300 - total flux cleaned = -0.000759607 Jy ! Component: 350 - total flux cleaned = -0.000711173 Jy ! Component: 400 - total flux cleaned = -0.000758321 Jy ! Component: 450 - total flux cleaned = -0.000804094 Jy ! Component: 500 - total flux cleaned = -0.000848844 Jy ! Component: 550 - total flux cleaned = -0.000892157 Jy ! Component: 600 - total flux cleaned = -0.000976538 Jy ! Component: 650 - total flux cleaned = -0.000997323 Jy ! Component: 700 - total flux cleaned = -0.00103776 Jy ! Component: 750 - total flux cleaned = -0.00101835 Jy ! Component: 800 - total flux cleaned = -0.00105704 Jy ! Component: 850 - total flux cleaned = -0.00107586 Jy ! Component: 900 - total flux cleaned = -0.00111287 Jy ! Component: 950 - total flux cleaned = -0.00120336 Jy ! Component: 1000 - total flux cleaned = -0.00123891 Jy ! Component: 1050 - total flux cleaned = -0.00132697 Jy ! Component: 1100 - total flux cleaned = -0.00141301 Jy ! Component: 1150 - total flux cleaned = -0.00139583 Jy ! Component: 1200 - total flux cleaned = -0.00147982 Jy ! Component: 1250 - total flux cleaned = -0.0015457 Jy ! Component: 1300 - total flux cleaned = -0.00161026 Jy ! Component: 1350 - total flux cleaned = -0.00164221 Jy ! Component: 1400 - total flux cleaned = -0.0016735 Jy ! Component: 1450 - total flux cleaned = -0.00168914 Jy ! Component: 1500 - total flux cleaned = -0.00178121 Jy ! Component: 1550 - total flux cleaned = -0.00184154 Jy ! Component: 1600 - total flux cleaned = -0.00191552 Jy ! Component: 1650 - total flux cleaned = -0.00198858 Jy ! Component: 1700 - total flux cleaned = -0.00201746 Jy ! Component: 1750 - total flux cleaned = -0.00207456 Jy ! Component: 1800 - total flux cleaned = -0.00210271 Jy ! Component: 1850 - total flux cleaned = -0.0021584 Jy ! Component: 1900 - total flux cleaned = -0.00219961 Jy ! Component: 1950 - total flux cleaned = -0.0021998 Jy ! Component: 2000 - total flux cleaned = -0.00225362 Jy ! Component: 2050 - total flux cleaned = -0.00226695 Jy ! Component: 2100 - total flux cleaned = -0.00226691 Jy ! Component: 2150 - total flux cleaned = -0.00224094 Jy ! Component: 2200 - total flux cleaned = -0.00226673 Jy ! Component: 2250 - total flux cleaned = -0.00226685 Jy ! Component: 2300 - total flux cleaned = -0.00230475 Jy ! Component: 2350 - total flux cleaned = -0.0023046 Jy ! Component: 2400 - total flux cleaned = -0.00232927 Jy ! Component: 2450 - total flux cleaned = -0.00230456 Jy ! Component: 2500 - total flux cleaned = -0.00228027 Jy ! Component: 2550 - total flux cleaned = -0.00223195 Jy ! Component: 2600 - total flux cleaned = -0.00223206 Jy ! Component: 2650 - total flux cleaned = -0.00218463 Jy ! Component: 2700 - total flux cleaned = -0.00216112 Jy ! Component: 2750 - total flux cleaned = -0.00214942 Jy ! Component: 2800 - total flux cleaned = -0.00214955 Jy ! Component: 2850 - total flux cleaned = -0.00219584 Jy ! Component: 2900 - total flux cleaned = -0.00218429 Jy ! Component: 2950 - total flux cleaned = -0.00218428 Jy ! Component: 3000 - total flux cleaned = -0.00218431 Jy ! Component: 3050 - total flux cleaned = -0.00218442 Jy ! Component: 3100 - total flux cleaned = -0.00220682 Jy ! Component: 3150 - total flux cleaned = -0.00215094 Jy ! Component: 3200 - total flux cleaned = -0.00215088 Jy ! Component: 3250 - total flux cleaned = -0.0021508 Jy ! Component: 3300 - total flux cleaned = -0.00215082 Jy ! Component: 3350 - total flux cleaned = -0.00213977 Jy ! Component: 3400 - total flux cleaned = -0.00212877 Jy ! Component: 3450 - total flux cleaned = -0.00211777 Jy ! Component: 3500 - total flux cleaned = -0.00208488 Jy ! Component: 3550 - total flux cleaned = -0.00204106 Jy ! Component: 3600 - total flux cleaned = -0.00201916 Jy ! Component: 3650 - total flux cleaned = -0.0019646 Jy ! Component: 3700 - total flux cleaned = -0.00193193 Jy ! Component: 3750 - total flux cleaned = -0.00191025 Jy ! Component: 3800 - total flux cleaned = -0.00185595 Jy ! Component: 3850 - total flux cleaned = -0.00181252 Jy ! Component: 3900 - total flux cleaned = -0.00176912 Jy ! Component: 3950 - total flux cleaned = -0.00173663 Jy ! Component: 4000 - total flux cleaned = -0.00169329 Jy ! Component: 4050 - total flux cleaned = -0.00166081 Jy ! Total flux subtracted in 4096 components = -0.00160672 Jy ! Clean residual min=-0.000669 max=0.000691 Jy/beam ! Clean residual mean=-0.000000 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.083079 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 332 components and 0.083079 Jy ![Exited script file: muppet] wmap "J1402-1825_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 16.62 at -20.29 degrees (North through East) ! Clean map min=-0.0012922 max=0.073173 Jy/beam ! Writing clean map to FITS file: J1402-1825_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0731729 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190604 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.781454 0.781454 1.56291 3.12582 6.25163 12.5033 25.0065 50.0131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 16.62 at -20.29 degrees (North through East) ! Clean map min=-0.0012922 max=0.073173 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1402-1825_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:59:27 2019