! Started logfile: J1402-1825_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:48 2019 obs J1402-1825_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1402-1825_S_2017_04_28_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.792797 visibilities/baseline/integration-bin. ! Found source: J1402-1825 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 20692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1402-1825_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 743 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929315Jy sigma=0.036316 ! Fit after self-cal, rms=0.917094Jy sigma=0.036266 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=6.703 mas, bpa=-17.23 degrees ! Estimated noise=800.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0411973 Jy ! Component: 100 - total flux cleaned = 0.0583297 Jy ! Total flux subtracted in 100 components = 0.0583297 Jy ! Clean residual min=-0.011107 max=0.017319 Jy/beam ! Clean residual mean=0.000037 rms=0.003683 Jy/beam ! Combined flux in latest and established models = 0.0583297 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0583297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154659Jy sigma=0.001559 ! Fit after self-cal, rms=0.154553Jy sigma=0.001545 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.797 mas, bpa=-17.28 degrees ! Estimated noise=459.404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379043 Jy ! Component: 100 - total flux cleaned = 0.000170616 Jy ! Component: 150 - total flux cleaned = -8.76704e-06 Jy ! Component: 200 - total flux cleaned = -0.000459663 Jy ! Total flux subtracted in 200 components = -0.000459663 Jy ! Clean residual min=-0.011851 max=0.015010 Jy/beam ! Clean residual mean=0.000082 rms=0.004249 Jy/beam ! Combined flux in latest and established models = 0.0578701 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.0578701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153864Jy sigma=0.001530 ! Fit after self-cal, rms=0.153625Jy sigma=0.001530 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.80 HN 0.76 KP 0.76 ! LA 0.77 MK 0.17 NL 0.72 OV 0.82 ! PT 0.83 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.80 HN 0.80 KP 0.78 ! LA 0.76 MK 9.68 NL 0.81 OV 0.87 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.75 HN 0.78 KP 0.74 ! LA 0.77 MK 0.37 NL 0.81 OV 0.79 ! PT 0.78 SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 0.83 KP 1.00* ! LA 14.96 MK 0.27 NL 1.00* OV 1.00* ! PT 1.09 SC 1.00* ! ! ! Fit before self-cal, rms=0.153625Jy sigma=0.001530 ! Fit after self-cal, rms=0.679776Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=7.441 mas, bpa=-10.38 degrees ! Estimated noise=502.418 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000844424 Jy ! Component: 100 - total flux cleaned = 0.00084987 Jy ! Component: 150 - total flux cleaned = 0.000849874 Jy ! Component: 200 - total flux cleaned = 0.000849785 Jy ! Total flux subtracted in 200 components = 0.000849785 Jy ! Clean residual min=-0.002196 max=0.002182 Jy/beam ! Clean residual mean=0.000003 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0587199 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0587199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.679558Jy sigma=0.000684 ! Fit after self-cal, rms=0.679788Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.679788Jy sigma=0.000670 ! Fit after self-cal, rms=1.146133Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=7.662 mas, bpa=-7.92 degrees ! Estimated noise=506.302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.94819e-05 Jy ! Component: 100 - total flux cleaned = -5.42548e-05 Jy ! Component: 150 - total flux cleaned = -0.000165287 Jy ! Component: 200 - total flux cleaned = -0.0001657 Jy ! Total flux subtracted in 200 components = -0.0001657 Jy ! Clean residual min=-0.001595 max=0.001547 Jy/beam ! Clean residual mean=0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0585542 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0585542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.145863Jy sigma=0.000662 ! Fit after self-cal, rms=1.145865Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137297 Jy ! Component: 100 - total flux cleaned = 0.000166273 Jy ! Component: 150 - total flux cleaned = 0.000191664 Jy ! Component: 200 - total flux cleaned = 0.000213513 Jy ! Total flux subtracted in 200 components = 0.000213513 Jy ! Clean residual min=-0.001473 max=0.001563 Jy/beam ! Clean residual mean=0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.0587677 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0587677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.145752Jy sigma=0.000662 ! Fit after self-cal, rms=1.145756Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.145756Jy sigma=0.000662 ! Fit after self-cal, rms=1.655708Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=7.902 mas, bpa=-4.443 degrees ! Estimated noise=526.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.43602e-05 Jy ! Component: 100 - total flux cleaned = -0.000114897 Jy ! Component: 150 - total flux cleaned = -0.000171944 Jy ! Component: 200 - total flux cleaned = -0.000221408 Jy ! Total flux subtracted in 200 components = -0.000221408 Jy ! Clean residual min=-0.001622 max=0.001569 Jy/beam ! Clean residual mean=0.000002 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0585463 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0585463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.655425Jy sigma=0.000661 ! Fit after self-cal, rms=1.655424Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.53194e-05 Jy ! Component: 100 - total flux cleaned = 8.57252e-05 Jy ! Component: 150 - total flux cleaned = 0.000119767 Jy ! Component: 200 - total flux cleaned = 0.000147384 Jy ! Total flux subtracted in 200 components = 0.000147384 Jy ! Clean residual min=-0.001664 max=0.001577 Jy/beam ! Clean residual mean=0.000002 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0586937 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0586937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.655296Jy sigma=0.000661 ! Fit after self-cal, rms=1.655297Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.655297Jy sigma=0.000661 ! Fit after self-cal, rms=2.110824Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.728 mas, bmaj=15.6 mas, bpa=2.195 degrees ! Estimated noise=614.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303097 Jy ! Component: 100 - total flux cleaned = 0.000349115 Jy ! Component: 150 - total flux cleaned = 0.000387638 Jy ! Component: 200 - total flux cleaned = 0.000409837 Jy ! Total flux subtracted in 200 components = 0.000409837 Jy ! Clean residual min=-0.001501 max=0.001358 Jy/beam ! Clean residual mean=0.000003 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0591035 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.0591035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.110785Jy sigma=0.000660 ! Fit after self-cal, rms=2.110783Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.99451e-05 Jy ! Component: 100 - total flux cleaned = 9.09317e-05 Jy ! Component: 150 - total flux cleaned = 0.000110722 Jy ! Component: 200 - total flux cleaned = 0.000101879 Jy ! Total flux subtracted in 200 components = 0.000101879 Jy ! Clean residual min=-0.001506 max=0.001355 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0592054 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.0592054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.110746Jy sigma=0.000660 ! Fit after self-cal, rms=2.110744Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=8.165 mas, bpa=-1.543 degrees ! Estimated noise=542.099 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.854 x 8.165 at -1.543 degrees (North through East) ! Clean map min=-0.0016097 max=0.061845 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=6.536 mas, bpa=-4.612 degrees ! Estimated noise=973.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479868 Jy ! Component: 100 - total flux cleaned = 0.0596787 Jy ! Component: 150 - total flux cleaned = 0.0601883 Jy ! Component: 200 - total flux cleaned = 0.0600476 Jy ! Total flux subtracted in 200 components = 0.0600476 Jy ! Clean residual min=-0.003118 max=0.003509 Jy/beam ! Clean residual mean=0.000000 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0600476 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0600476 Jy ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=8.165 mas, bpa=-1.543 degrees ! Estimated noise=542.099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108931 Jy ! Component: 100 - total flux cleaned = -0.000226877 Jy ! Component: 150 - total flux cleaned = -0.000321171 Jy ! Component: 200 - total flux cleaned = -0.000438898 Jy ! Total flux subtracted in 200 components = -0.000438898 Jy ! Clean residual min=-0.001786 max=0.001523 Jy/beam ! Clean residual mean=0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0596087 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.0596087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.728 mas, bmaj=15.6 mas, bpa=2.195 degrees ! Estimated noise=614.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227528 Jy ! Component: 100 - total flux cleaned = -0.000256253 Jy ! Component: 150 - total flux cleaned = -0.000287153 Jy ! Component: 200 - total flux cleaned = -0.000302661 Jy ! Total flux subtracted in 200 components = -0.000302661 Jy ! Clean residual min=-0.001529 max=0.001384 Jy/beam ! Clean residual mean=0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.059306 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.38043e-05 Jy ! Component: 100 - total flux cleaned = -2.68524e-05 Jy ! Component: 150 - total flux cleaned = -3.90287e-05 Jy ! Component: 200 - total flux cleaned = -5.05593e-05 Jy ! Total flux subtracted in 200 components = -5.05593e-05 Jy ! Clean residual min=-0.001527 max=0.001397 Jy/beam ! Clean residual mean=0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0592555 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0592555 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=8.165 mas, bpa=-1.543 degrees ! Estimated noise=542.099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105609 Jy ! Component: 100 - total flux cleaned = -0.000160872 Jy ! Component: 150 - total flux cleaned = -0.000249073 Jy ! Component: 200 - total flux cleaned = -0.000306631 Jy ! Total flux subtracted in 200 components = -0.000306631 Jy ! Clean residual min=-0.001875 max=0.001545 Jy/beam ! Clean residual mean=0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0589488 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0589488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.110136Jy sigma=0.000661 ! Fit after self-cal, rms=2.110131Jy sigma=0.000661 wmodel J1402-1825_S_2017_04_28_pus_map.mod ! Writing 35 model components to file: J1402-1825_S_2017_04_28_pus_map.mod wobs J1402-1825_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1402-1825_S_2017_04_28_pus_uvs.fits wwins J1402-1825_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1402-1825_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390274 Jy ! Component: 100 - total flux cleaned = -0.000524057 Jy ! Component: 150 - total flux cleaned = -0.000728094 Jy ! Component: 200 - total flux cleaned = -0.000947105 Jy ! Component: 250 - total flux cleaned = -0.0010642 Jy ! Component: 300 - total flux cleaned = -0.00120174 Jy ! Component: 350 - total flux cleaned = -0.00131411 Jy ! Component: 400 - total flux cleaned = -0.0014017 Jy ! Component: 450 - total flux cleaned = -0.00146595 Jy ! Component: 500 - total flux cleaned = -0.00150792 Jy ! Component: 550 - total flux cleaned = -0.00150771 Jy ! Component: 600 - total flux cleaned = -0.00148741 Jy ! Component: 650 - total flux cleaned = -0.00144778 Jy ! Component: 700 - total flux cleaned = -0.00142811 Jy ! Component: 750 - total flux cleaned = -0.00135101 Jy ! Component: 800 - total flux cleaned = -0.00131328 Jy ! Component: 850 - total flux cleaned = -0.00127573 Jy ! Component: 900 - total flux cleaned = -0.00123858 Jy ! Component: 950 - total flux cleaned = -0.00118389 Jy ! Component: 1000 - total flux cleaned = -0.00111231 Jy ! Component: 1050 - total flux cleaned = -0.00105908 Jy ! Component: 1100 - total flux cleaned = -0.000971704 Jy ! Component: 1150 - total flux cleaned = -0.000937151 Jy ! Component: 1200 - total flux cleaned = -0.000869007 Jy ! Component: 1250 - total flux cleaned = -0.000835299 Jy ! Component: 1300 - total flux cleaned = -0.000768478 Jy ! Component: 1350 - total flux cleaned = -0.000702581 Jy ! Component: 1400 - total flux cleaned = -0.000669913 Jy ! Component: 1450 - total flux cleaned = -0.000669842 Jy ! Component: 1500 - total flux cleaned = -0.000605696 Jy ! Component: 1550 - total flux cleaned = -0.000605667 Jy ! Component: 1600 - total flux cleaned = -0.000542725 Jy ! Component: 1650 - total flux cleaned = -0.000558087 Jy ! Component: 1700 - total flux cleaned = -0.000496207 Jy ! Component: 1750 - total flux cleaned = -0.000465353 Jy ! Component: 1800 - total flux cleaned = -0.000419817 Jy ! Component: 1850 - total flux cleaned = -0.000359552 Jy ! Component: 1900 - total flux cleaned = -0.000374619 Jy ! Component: 1950 - total flux cleaned = -0.000300521 Jy ! Component: 2000 - total flux cleaned = -0.000300486 Jy ! Component: 2050 - total flux cleaned = -0.000242021 Jy ! Component: 2100 - total flux cleaned = -0.000213068 Jy ! Component: 2150 - total flux cleaned = -0.000227449 Jy ! Component: 2200 - total flux cleaned = -0.000184573 Jy ! Component: 2250 - total flux cleaned = -0.000156373 Jy ! Component: 2300 - total flux cleaned = -0.000170462 Jy ! Component: 2350 - total flux cleaned = -0.000142376 Jy ! Component: 2400 - total flux cleaned = -0.000156185 Jy ! Component: 2450 - total flux cleaned = -0.000100959 Jy ! Component: 2500 - total flux cleaned = -0.000100994 Jy ! Component: 2550 - total flux cleaned = -7.38473e-05 Jy ! Component: 2600 - total flux cleaned = -0.000114607 Jy ! Component: 2650 - total flux cleaned = -8.76066e-05 Jy ! Component: 2700 - total flux cleaned = -7.40976e-05 Jy ! Component: 2750 - total flux cleaned = -3.41759e-05 Jy ! Component: 2800 - total flux cleaned = -2.09136e-05 Jy ! Component: 2850 - total flux cleaned = 1.85885e-05 Jy ! Component: 2900 - total flux cleaned = 3.16605e-05 Jy ! Component: 2950 - total flux cleaned = 4.4638e-05 Jy ! Component: 3000 - total flux cleaned = 8.3508e-05 Jy ! Component: 3050 - total flux cleaned = 7.07018e-05 Jy ! Component: 3100 - total flux cleaned = 8.36063e-05 Jy ! Component: 3150 - total flux cleaned = 7.09341e-05 Jy ! Component: 3200 - total flux cleaned = 8.3563e-05 Jy ! Component: 3250 - total flux cleaned = 8.35206e-05 Jy ! Component: 3300 - total flux cleaned = 9.60332e-05 Jy ! Component: 3350 - total flux cleaned = 7.11488e-05 Jy ! Component: 3400 - total flux cleaned = 7.10626e-05 Jy ! Component: 3450 - total flux cleaned = 0.000120425 Jy ! Component: 3500 - total flux cleaned = 0.000108072 Jy ! Component: 3550 - total flux cleaned = 0.000108043 Jy ! Component: 3600 - total flux cleaned = 0.000144535 Jy ! Component: 3650 - total flux cleaned = 0.000132345 Jy ! Component: 3700 - total flux cleaned = 0.000132407 Jy ! Component: 3750 - total flux cleaned = 0.00012036 Jy ! Component: 3800 - total flux cleaned = 0.000144211 Jy ! Component: 3850 - total flux cleaned = 0.000108559 Jy ! Component: 3900 - total flux cleaned = 0.00013219 Jy ! Component: 3950 - total flux cleaned = 8.5042e-05 Jy ! Component: 4000 - total flux cleaned = 0.000108477 Jy ! Component: 4050 - total flux cleaned = 7.34135e-05 Jy ! Total flux subtracted in 4096 components = 9.67079e-05 Jy ! Clean residual min=-0.000688 max=0.000581 Jy/beam ! Clean residual mean=0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0590455 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 280 components and 0.0590456 Jy ![Exited script file: muppet] wmap "J1402-1825_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.854 x 8.165 at -1.543 degrees (North through East) ! Clean map min=-0.0012178 max=0.062646 Jy/beam ! Writing clean map to FITS file: J1402-1825_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0626457 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197564 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.946101 0.946101 1.8922 3.7844 7.56881 15.1376 30.2752 60.5504 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.854 x 8.165 at -1.543 degrees (North through East) ! Clean map min=-0.0012178 max=0.062646 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1402-1825_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:53 2019