! Started logfile: J1401-3004_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:43 2019 obs J1401-3004_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1401-3004_S_2017_04_28_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.716959 visibilities/baseline/integration-bin. ! Found source: J1401-3004 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 9808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1401-3004_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 440 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914895Jy sigma=0.050524 ! Fit after self-cal, rms=0.902441Jy sigma=0.050387 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.608 mas, bpa=-9.755 degrees ! Estimated noise=821.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367023 Jy ! Component: 100 - total flux cleaned = 0.0398935 Jy ! Total flux subtracted in 100 components = 0.0398935 Jy ! Clean residual min=-0.019530 max=0.022440 Jy/beam ! Clean residual mean=0.000091 rms=0.006062 Jy/beam ! Combined flux in latest and established models = 0.0398935 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0398935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134441Jy sigma=0.002000 ! Fit after self-cal, rms=0.134379Jy sigma=0.001994 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.97 mas, bmaj=9.752 mas, bpa=-9.041 degrees ! Estimated noise=547.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780651 Jy ! Component: 100 - total flux cleaned = 0.000255126 Jy ! Component: 150 - total flux cleaned = -0.000204422 Jy ! Component: 200 - total flux cleaned = -0.0006064 Jy ! Total flux subtracted in 200 components = -0.0006064 Jy ! Clean residual min=-0.017192 max=0.023481 Jy/beam ! Clean residual mean=0.000159 rms=0.005677 Jy/beam ! Combined flux in latest and established models = 0.0392871 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.0392871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131761Jy sigma=0.002030 ! Fit after self-cal, rms=0.131617Jy sigma=0.002030 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.57 HN 0.90 KP 0.58 ! LA 0.59 MK 0.66 NL 0.63 OV 0.57 ! PT 0.57 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 0.49 HN 0.86 KP 0.55 ! LA 0.52 MK 0.74 NL 0.72 OV 0.66 ! PT 0.60 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.54 HN 1.00 KP 0.58 ! LA 0.54 MK 0.63 NL 0.68 OV 0.58 ! PT 0.56 SC 1.04 ! ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.87 HN 1.16 KP 1.00* ! LA 15.95 MK 0.95 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.131617Jy sigma=0.002030 ! Fit after self-cal, rms=0.061653Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=8.972 mas, bpa=-3.308 degrees ! Estimated noise=535.184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388527 Jy ! Component: 100 - total flux cleaned = 0.000315996 Jy ! Component: 150 - total flux cleaned = 0.000317012 Jy ! Component: 200 - total flux cleaned = 0.000321214 Jy ! Total flux subtracted in 200 components = 0.000321214 Jy ! Clean residual min=-0.001758 max=0.002059 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0396083 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.0396083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061566Jy sigma=0.000665 ! Fit after self-cal, rms=0.061091Jy sigma=0.000659 ! Inverting map ! Added new window around map position (-7, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233301 Jy ! Component: 100 - total flux cleaned = 0.00278534 Jy ! Component: 150 - total flux cleaned = 0.00294596 Jy ! Component: 200 - total flux cleaned = 0.00308747 Jy ! Total flux subtracted in 200 components = 0.00308747 Jy ! Clean residual min=-0.001784 max=0.002183 Jy/beam ! Clean residual mean=0.000003 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.0426957 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.0426957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060925Jy sigma=0.000657 ! Fit after self-cal, rms=0.060942Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060942Jy sigma=0.000657 ! Fit after self-cal, rms=0.056663Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=8.927 mas, bpa=-3.808 degrees ! Estimated noise=531.421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100371 Jy ! Component: 100 - total flux cleaned = 0.00113522 Jy ! Component: 150 - total flux cleaned = 0.00122614 Jy ! Component: 200 - total flux cleaned = 0.00133678 Jy ! Total flux subtracted in 200 components = 0.00133678 Jy ! Clean residual min=-0.001600 max=0.001550 Jy/beam ! Clean residual mean=-0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0440325 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0440325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056597Jy sigma=0.000652 ! Fit after self-cal, rms=0.056557Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135261 Jy ! Component: 100 - total flux cleaned = 0.00153147 Jy ! Component: 150 - total flux cleaned = 0.00165496 Jy ! Component: 200 - total flux cleaned = 0.00173783 Jy ! Total flux subtracted in 200 components = 0.00173783 Jy ! Clean residual min=-0.001647 max=0.001397 Jy/beam ! Clean residual mean=0.000000 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0457703 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.0457703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056467Jy sigma=0.000651 ! Fit after self-cal, rms=0.056442Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056442Jy sigma=0.000651 ! Fit after self-cal, rms=0.055562Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=8.9 mas, bpa=-3.965 degrees ! Estimated noise=529.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457937 Jy ! Component: 100 - total flux cleaned = 0.000569272 Jy ! Component: 150 - total flux cleaned = 0.00066873 Jy ! Component: 200 - total flux cleaned = 0.000691194 Jy ! Total flux subtracted in 200 components = 0.000691194 Jy ! Clean residual min=-0.001444 max=0.001378 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0464615 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 76 components and 0.0464615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055515Jy sigma=0.000650 ! Fit after self-cal, rms=0.055495Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184982 Jy ! Component: 100 - total flux cleaned = 0.000206731 Jy ! Component: 150 - total flux cleaned = 0.000227692 Jy ! Component: 200 - total flux cleaned = 0.000267958 Jy ! Total flux subtracted in 200 components = 0.000267958 Jy ! Clean residual min=-0.001431 max=0.001326 Jy/beam ! Clean residual mean=-0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0467295 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.0467295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055464Jy sigma=0.000649 ! Fit after self-cal, rms=0.055452Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055452Jy sigma=0.000649 ! Fit after self-cal, rms=0.055016Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.748 mas, bmaj=24.57 mas, bpa=3.712 degrees ! Estimated noise=564.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537378 Jy ! Component: 100 - total flux cleaned = 0.000595726 Jy ! Component: 150 - total flux cleaned = 0.000607366 Jy ! Component: 200 - total flux cleaned = 0.000617567 Jy ! Total flux subtracted in 200 components = 0.000617567 Jy ! Clean residual min=-0.001116 max=0.001262 Jy/beam ! Clean residual mean=-0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0473471 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.0473471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055012Jy sigma=0.000649 ! Fit after self-cal, rms=0.054994Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116577 Jy ! Component: 100 - total flux cleaned = 0.000106795 Jy ! Component: 150 - total flux cleaned = 8.77076e-05 Jy ! Component: 200 - total flux cleaned = 7.9078e-05 Jy ! Total flux subtracted in 200 components = 7.9078e-05 Jy ! Clean residual min=-0.001124 max=0.001219 Jy/beam ! Clean residual mean=-0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0474261 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.0474261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054990Jy sigma=0.000649 ! Fit after self-cal, rms=0.054983Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=8.883 mas, bpa=-3.97 degrees ! Estimated noise=530.206 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.682 x 8.883 at -3.97 degrees (North through East) ! Clean map min=-0.0025126 max=0.047804 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=6.976 mas, bpa=-4.102 degrees ! Estimated noise=806.988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365137 Jy ! Component: 100 - total flux cleaned = 0.0430185 Jy ! Component: 150 - total flux cleaned = 0.0424985 Jy ! Component: 200 - total flux cleaned = 0.0426777 Jy ! Total flux subtracted in 200 components = 0.0426777 Jy ! Clean residual min=-0.003594 max=0.002981 Jy/beam ! Clean residual mean=0.000001 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0426777 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0426777 Jy ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=8.883 mas, bpa=-3.97 degrees ! Estimated noise=530.206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190802 Jy ! Component: 100 - total flux cleaned = 0.00258993 Jy ! Component: 150 - total flux cleaned = 0.00300309 Jy ! Component: 200 - total flux cleaned = 0.00329322 Jy ! Total flux subtracted in 200 components = 0.00329322 Jy ! Clean residual min=-0.001838 max=0.001548 Jy/beam ! Clean residual mean=-0.000002 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0459709 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 37 components and 0.0459709 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.748 mas, bmaj=24.57 mas, bpa=3.712 degrees ! Estimated noise=564.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124292 Jy ! Component: 100 - total flux cleaned = 0.00138769 Jy ! Component: 150 - total flux cleaned = 0.00146039 Jy ! Component: 200 - total flux cleaned = 0.00143925 Jy ! Total flux subtracted in 200 components = 0.00143925 Jy ! Clean residual min=-0.001131 max=0.001279 Jy/beam ! Clean residual mean=-0.000001 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0474101 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.67247e-07 Jy ! Component: 100 - total flux cleaned = -8.22538e-08 Jy ! Component: 150 - total flux cleaned = -1.7388e-05 Jy ! Component: 200 - total flux cleaned = -1.70025e-05 Jy ! Total flux subtracted in 200 components = -1.70025e-05 Jy ! Clean residual min=-0.001136 max=0.001213 Jy/beam ! Clean residual mean=-0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0473931 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 75 components and 0.0473931 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=8.883 mas, bpa=-3.97 degrees ! Estimated noise=530.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.8843e-06 Jy ! Component: 100 - total flux cleaned = -0.000117601 Jy ! Component: 150 - total flux cleaned = -0.000262546 Jy ! Component: 200 - total flux cleaned = -0.000352807 Jy ! Total flux subtracted in 200 components = -0.000352807 Jy ! Clean residual min=-0.001722 max=0.001418 Jy/beam ! Clean residual mean=-0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0470403 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.0470403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055241Jy sigma=0.000650 ! Fit after self-cal, rms=0.055351Jy sigma=0.000650 wmodel J1401-3004_S_2017_04_28_pus_map.mod ! Writing 86 model components to file: J1401-3004_S_2017_04_28_pus_map.mod wobs J1401-3004_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1401-3004_S_2017_04_28_pus_uvs.fits wwins J1401-3004_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J1401-3004_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035571 Jy ! Component: 100 - total flux cleaned = -0.000480316 Jy ! Component: 150 - total flux cleaned = -0.00059596 Jy ! Component: 200 - total flux cleaned = -0.000705707 Jy ! Component: 250 - total flux cleaned = -0.000872419 Jy ! Component: 300 - total flux cleaned = -0.00103168 Jy ! Component: 350 - total flux cleaned = -0.00114668 Jy ! Component: 400 - total flux cleaned = -0.00129472 Jy ! Component: 450 - total flux cleaned = -0.00140231 Jy ! Component: 500 - total flux cleaned = -0.00157699 Jy ! Component: 550 - total flux cleaned = -0.0017637 Jy ! Component: 600 - total flux cleaned = -0.00191222 Jy ! Component: 650 - total flux cleaned = -0.00204123 Jy ! Component: 700 - total flux cleaned = -0.0022145 Jy ! Component: 750 - total flux cleaned = -0.00236828 Jy ! Component: 800 - total flux cleaned = -0.00245882 Jy ! Component: 850 - total flux cleaned = -0.00254792 Jy ! Component: 900 - total flux cleaned = -0.00260614 Jy ! Component: 950 - total flux cleaned = -0.00267772 Jy ! Component: 1000 - total flux cleaned = -0.00277607 Jy ! Component: 1050 - total flux cleaned = -0.00285902 Jy ! Component: 1100 - total flux cleaned = -0.00294036 Jy ! Component: 1150 - total flux cleaned = -0.00299397 Jy ! Component: 1200 - total flux cleaned = -0.00304689 Jy ! Component: 1250 - total flux cleaned = -0.00312506 Jy ! Component: 1300 - total flux cleaned = -0.00315077 Jy ! Component: 1350 - total flux cleaned = -0.00321399 Jy ! Component: 1400 - total flux cleaned = -0.00328877 Jy ! Component: 1450 - total flux cleaned = -0.00336234 Jy ! Component: 1500 - total flux cleaned = -0.00341064 Jy ! Component: 1550 - total flux cleaned = -0.00347019 Jy ! Component: 1600 - total flux cleaned = -0.00348189 Jy ! Component: 1650 - total flux cleaned = -0.00356361 Jy ! Component: 1700 - total flux cleaned = -0.00360976 Jy ! Component: 1750 - total flux cleaned = -0.00366675 Jy ! Component: 1800 - total flux cleaned = -0.00372306 Jy ! Component: 1850 - total flux cleaned = -0.0037565 Jy ! Component: 1900 - total flux cleaned = -0.0037784 Jy ! Component: 1950 - total flux cleaned = -0.00381107 Jy ! Component: 2000 - total flux cleaned = -0.00383253 Jy ! Component: 2050 - total flux cleaned = -0.00384323 Jy ! Component: 2100 - total flux cleaned = -0.00388528 Jy ! Component: 2150 - total flux cleaned = -0.00391654 Jy ! Component: 2200 - total flux cleaned = -0.00393695 Jy ! Component: 2250 - total flux cleaned = -0.00397773 Jy ! Component: 2300 - total flux cleaned = -0.00401798 Jy ! Component: 2350 - total flux cleaned = -0.00403775 Jy ! Component: 2400 - total flux cleaned = -0.0040772 Jy ! Component: 2450 - total flux cleaned = -0.00407718 Jy ! Component: 2500 - total flux cleaned = -0.00409665 Jy ! Component: 2550 - total flux cleaned = -0.00411582 Jy ! Component: 2600 - total flux cleaned = -0.00413487 Jy ! Component: 2650 - total flux cleaned = -0.00417261 Jy ! Component: 2700 - total flux cleaned = -0.0042099 Jy ! Component: 2750 - total flux cleaned = -0.00422826 Jy ! Component: 2800 - total flux cleaned = -0.00423741 Jy ! Component: 2850 - total flux cleaned = -0.00426471 Jy ! Component: 2900 - total flux cleaned = -0.00426463 Jy ! Component: 2950 - total flux cleaned = -0.00428258 Jy ! Component: 3000 - total flux cleaned = -0.00429141 Jy ! Component: 3050 - total flux cleaned = -0.00429144 Jy ! Component: 3100 - total flux cleaned = -0.00430885 Jy ! Component: 3150 - total flux cleaned = -0.0043089 Jy ! Component: 3200 - total flux cleaned = -0.00431748 Jy ! Component: 3250 - total flux cleaned = -0.0043089 Jy ! Component: 3300 - total flux cleaned = -0.00435117 Jy ! Component: 3350 - total flux cleaned = -0.00435952 Jy ! Component: 3400 - total flux cleaned = -0.0044011 Jy ! Component: 3450 - total flux cleaned = -0.00442591 Jy ! Component: 3500 - total flux cleaned = -0.00444238 Jy ! Component: 3550 - total flux cleaned = -0.00445057 Jy ! Component: 3600 - total flux cleaned = -0.00449113 Jy ! Component: 3650 - total flux cleaned = -0.00449926 Jy ! Component: 3700 - total flux cleaned = -0.00454729 Jy ! Component: 3750 - total flux cleaned = -0.00457899 Jy ! Component: 3800 - total flux cleaned = -0.00458688 Jy ! Component: 3850 - total flux cleaned = -0.00458689 Jy ! Component: 3900 - total flux cleaned = -0.00461804 Jy ! Component: 3950 - total flux cleaned = -0.00464128 Jy ! Component: 4000 - total flux cleaned = -0.00463361 Jy ! Component: 4050 - total flux cleaned = -0.00466418 Jy ! Total flux subtracted in 4096 components = -0.00469459 Jy ! Clean residual min=-0.000464 max=0.000380 Jy/beam ! Clean residual mean=-0.000000 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.0423457 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 333 components and 0.0423457 Jy ![Exited script file: muppet] wmap "J1401-3004_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.682 x 8.883 at -3.97 degrees (North through East) ! Clean map min=-0.0017759 max=0.045432 Jy/beam ! Writing clean map to FITS file: J1401-3004_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0454322 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000138725 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.916037 0.916037 1.83207 3.66415 7.32829 14.6566 29.3132 58.6263 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.682 x 8.883 at -3.97 degrees (North through East) ! Clean map min=-0.0017759 max=0.045432 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1401-3004_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:48 2019