! Started logfile: J1400-1858_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:39 2019 obs J1400-1858_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1400-1858_S_2017_04_28_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.771429 visibilities/baseline/integration-bin. ! Found source: J1400-1858 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 7776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1400-1858_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.759663Jy sigma=0.030332 ! Fit after self-cal, rms=0.744206Jy sigma=0.030303 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=7.045 mas, bpa=-6.372 degrees ! Estimated noise=1293.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134016 Jy ! Component: 100 - total flux cleaned = 0.164455 Jy ! Total flux subtracted in 100 components = 0.164455 Jy ! Clean residual min=-0.054037 max=0.069042 Jy/beam ! Clean residual mean=0.000125 rms=0.017935 Jy/beam ! Combined flux in latest and established models = 0.164455 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.164455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179613Jy sigma=0.004646 ! Fit after self-cal, rms=0.179588Jy sigma=0.004645 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.161 mas, bmaj=8.714 mas, bpa=-4.893 degrees ! Estimated noise=865.452 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0136708 Jy ! Component: 100 - total flux cleaned = -0.0164675 Jy ! Component: 150 - total flux cleaned = -0.0187867 Jy ! Component: 200 - total flux cleaned = -0.0202479 Jy ! Total flux subtracted in 200 components = -0.0202479 Jy ! Clean residual min=-0.048869 max=0.062493 Jy/beam ! Clean residual mean=0.000215 rms=0.017470 Jy/beam ! Combined flux in latest and established models = 0.144207 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.144207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175200Jy sigma=0.004352 ! Fit after self-cal, rms=0.175086Jy sigma=0.004352 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.75 HN 0.85 KP 0.72 ! LA 0.72 MK 0.46 NL 0.68 OV 0.77 ! PT 0.80 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.69 HN 0.90 KP 0.68 ! LA 0.68 MK 0.51 NL 0.81 OV 0.80 ! PT 0.83 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.71 HN 0.89 KP 0.73 ! LA 0.73 MK 0.63 NL 0.78 OV 0.71 ! PT 0.76 SC 1.10 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.76 HN 0.81 KP 1.00* ! LA 26.69 MK 1.12 NL 1.00* OV 1.00* ! PT 0.82 SC 1.00* ! ! ! Fit before self-cal, rms=0.175086Jy sigma=0.004352 ! Fit after self-cal, rms=1.022563Jy sigma=0.000706 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=8.294 mas, bpa=-2.39 degrees ! Estimated noise=859.173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236516 Jy ! Component: 100 - total flux cleaned = 0.00254721 Jy ! Component: 150 - total flux cleaned = 0.0025522 Jy ! Component: 200 - total flux cleaned = 0.00267307 Jy ! Total flux subtracted in 200 components = 0.00267307 Jy ! Clean residual min=-0.005102 max=0.004348 Jy/beam ! Clean residual mean=0.000003 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.14688 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.14688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.022699Jy sigma=0.000700 ! Fit after self-cal, rms=1.023023Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.023023Jy sigma=0.000689 ! Fit after self-cal, rms=0.079575Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=8.289 mas, bpa=-2.381 degrees ! Estimated noise=852.263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118493 Jy ! Component: 100 - total flux cleaned = 0.00118999 Jy ! Component: 150 - total flux cleaned = 0.00128153 Jy ! Component: 200 - total flux cleaned = 0.00128039 Jy ! Total flux subtracted in 200 components = 0.00128039 Jy ! Clean residual min=-0.002850 max=0.003106 Jy/beam ! Clean residual mean=0.000002 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.14816 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.14816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079292Jy sigma=0.000662 ! Fit after self-cal, rms=0.079278Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (42, 112). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261188 Jy ! Component: 100 - total flux cleaned = 0.0031729 Jy ! Component: 150 - total flux cleaned = 0.00322819 Jy ! Component: 200 - total flux cleaned = 0.00317805 Jy ! Total flux subtracted in 200 components = 0.00317805 Jy ! Clean residual min=-0.002593 max=0.002666 Jy/beam ! Clean residual mean=0.000002 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.151338 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.151338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079139Jy sigma=0.000660 ! Fit after self-cal, rms=0.079141Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079141Jy sigma=0.000660 ! Fit after self-cal, rms=0.079189Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=8.286 mas, bpa=-1.896 degrees ! Estimated noise=854.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129519 Jy ! Component: 100 - total flux cleaned = 0.00148526 Jy ! Component: 150 - total flux cleaned = 0.00148978 Jy ! Component: 200 - total flux cleaned = 0.00149026 Jy ! Total flux subtracted in 200 components = 0.00149026 Jy ! Clean residual min=-0.002448 max=0.002408 Jy/beam ! Clean residual mean=-0.000000 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.152829 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.152829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079052Jy sigma=0.000658 ! Fit after self-cal, rms=0.079055Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.92924e-06 Jy ! Component: 100 - total flux cleaned = -1.34754e-06 Jy ! Component: 150 - total flux cleaned = -4.07101e-05 Jy ! Component: 200 - total flux cleaned = -4.17533e-05 Jy ! Total flux subtracted in 200 components = -4.17533e-05 Jy ! Clean residual min=-0.002336 max=0.002390 Jy/beam ! Clean residual mean=-0.000000 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.152787 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.152787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078999Jy sigma=0.000658 ! Fit after self-cal, rms=0.078998Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078998Jy sigma=0.000658 ! Fit after self-cal, rms=0.078780Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.934 mas, bmaj=16.05 mas, bpa=2.518 degrees ! Estimated noise=948.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000824656 Jy ! Component: 100 - total flux cleaned = 0.000856203 Jy ! Component: 150 - total flux cleaned = 0.00085867 Jy ! Component: 200 - total flux cleaned = 0.000858622 Jy ! Total flux subtracted in 200 components = 0.000858622 Jy ! Clean residual min=-0.001925 max=0.002228 Jy/beam ! Clean residual mean=-0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.153645 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.153645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078750Jy sigma=0.000658 ! Fit after self-cal, rms=0.078748Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.14082e-05 Jy ! Component: 100 - total flux cleaned = -6.94834e-05 Jy ! Component: 150 - total flux cleaned = -8.69617e-05 Jy ! Component: 200 - total flux cleaned = -0.000120274 Jy ! Total flux subtracted in 200 components = -0.000120274 Jy ! Clean residual min=-0.001869 max=0.002174 Jy/beam ! Clean residual mean=-0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.153525 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.153525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078739Jy sigma=0.000658 ! Fit after self-cal, rms=0.078743Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=8.283 mas, bpa=-1.573 degrees ! Estimated noise=856.978 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.918 x 8.283 at -1.573 degrees (North through East) ! Clean map min=-0.0026727 max=0.16768 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=6.876 mas, bpa=-1.505 degrees ! Estimated noise=1278.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132966 Jy ! Component: 100 - total flux cleaned = 0.157691 Jy ! Component: 150 - total flux cleaned = 0.156524 Jy ! Component: 200 - total flux cleaned = 0.155252 Jy ! Total flux subtracted in 200 components = 0.155252 Jy ! Clean residual min=-0.005907 max=0.005800 Jy/beam ! Clean residual mean=0.000000 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.155252 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.155252 Jy ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=8.283 mas, bpa=-1.573 degrees ! Estimated noise=856.978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209328 Jy ! Component: 100 - total flux cleaned = -0.00193082 Jy ! Component: 150 - total flux cleaned = -0.00162684 Jy ! Component: 200 - total flux cleaned = -0.00123165 Jy ! Total flux subtracted in 200 components = -0.00123165 Jy ! Clean residual min=-0.002866 max=0.002909 Jy/beam ! Clean residual mean=0.000000 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.154021 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.154021 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.934 mas, bmaj=16.05 mas, bpa=2.518 degrees ! Estimated noise=948.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495535 Jy ! Component: 100 - total flux cleaned = 0.000538442 Jy ! Component: 150 - total flux cleaned = 0.000581838 Jy ! Component: 200 - total flux cleaned = 0.000546925 Jy ! Total flux subtracted in 200 components = 0.000546925 Jy ! Clean residual min=-0.002399 max=0.002259 Jy/beam ! Clean residual mean=-0.000001 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.154567 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.92549e-05 Jy ! Component: 100 - total flux cleaned = -0.000134729 Jy ! Component: 150 - total flux cleaned = -0.000198464 Jy ! Component: 200 - total flux cleaned = -0.000228928 Jy ! Total flux subtracted in 200 components = -0.000228928 Jy ! Clean residual min=-0.002286 max=0.002182 Jy/beam ! Clean residual mean=-0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.154339 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.154339 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=8.283 mas, bpa=-1.573 degrees ! Estimated noise=856.978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234779 Jy ! Component: 100 - total flux cleaned = 0.000150724 Jy ! Component: 150 - total flux cleaned = 0.000151306 Jy ! Component: 200 - total flux cleaned = 0.000151894 Jy ! Total flux subtracted in 200 components = 0.000151894 Jy ! Clean residual min=-0.002382 max=0.002403 Jy/beam ! Clean residual mean=-0.000000 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.15449 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.15449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078869Jy sigma=0.000658 ! Fit after self-cal, rms=0.078887Jy sigma=0.000658 wmodel J1400-1858_S_2017_04_28_pus_map.mod ! Writing 56 model components to file: J1400-1858_S_2017_04_28_pus_map.mod wobs J1400-1858_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1400-1858_S_2017_04_28_pus_uvs.fits wwins J1400-1858_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J1400-1858_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.0314e-05 Jy ! Component: 100 - total flux cleaned = -0.000298044 Jy ! Component: 150 - total flux cleaned = -0.000712788 Jy ! Component: 200 - total flux cleaned = -0.00107503 Jy ! Component: 250 - total flux cleaned = -0.00139051 Jy ! Component: 300 - total flux cleaned = -0.00155966 Jy ! Component: 350 - total flux cleaned = -0.00172414 Jy ! Component: 400 - total flux cleaned = -0.00181989 Jy ! Component: 450 - total flux cleaned = -0.00188209 Jy ! Component: 500 - total flux cleaned = -0.00188232 Jy ! Component: 550 - total flux cleaned = -0.00200241 Jy ! Component: 600 - total flux cleaned = -0.00206107 Jy ! Component: 650 - total flux cleaned = -0.00211795 Jy ! Component: 700 - total flux cleaned = -0.00214657 Jy ! Component: 750 - total flux cleaned = -0.0022837 Jy ! Component: 800 - total flux cleaned = -0.00228404 Jy ! Component: 850 - total flux cleaned = -0.00241609 Jy ! Component: 900 - total flux cleaned = -0.00254567 Jy ! Component: 950 - total flux cleaned = -0.00262147 Jy ! Component: 1000 - total flux cleaned = -0.00267143 Jy ! Component: 1050 - total flux cleaned = -0.00284338 Jy ! Component: 1100 - total flux cleaned = -0.00289193 Jy ! Component: 1150 - total flux cleaned = -0.002964 Jy ! Component: 1200 - total flux cleaned = -0.0030578 Jy ! Component: 1250 - total flux cleaned = -0.00312723 Jy ! Component: 1300 - total flux cleaned = -0.0032184 Jy ! Component: 1350 - total flux cleaned = -0.00321799 Jy ! Component: 1400 - total flux cleaned = -0.00324044 Jy ! Component: 1450 - total flux cleaned = -0.00328398 Jy ! Component: 1500 - total flux cleaned = -0.00328394 Jy ! Component: 1550 - total flux cleaned = -0.00330538 Jy ! Component: 1600 - total flux cleaned = -0.00334763 Jy ! Component: 1650 - total flux cleaned = -0.00334736 Jy ! Component: 1700 - total flux cleaned = -0.00336796 Jy ! Component: 1750 - total flux cleaned = -0.00344894 Jy ! Component: 1800 - total flux cleaned = -0.00352901 Jy ! Component: 1850 - total flux cleaned = -0.00362822 Jy ! Component: 1900 - total flux cleaned = -0.00380501 Jy ! Component: 1950 - total flux cleaned = -0.00392155 Jy ! Component: 2000 - total flux cleaned = -0.00401757 Jy ! Component: 2050 - total flux cleaned = -0.00415086 Jy ! Component: 2100 - total flux cleaned = -0.00428247 Jy ! Component: 2150 - total flux cleaned = -0.00446906 Jy ! Component: 2200 - total flux cleaned = -0.0045797 Jy ! Component: 2250 - total flux cleaned = -0.00468928 Jy ! Component: 2300 - total flux cleaned = -0.00485243 Jy ! Component: 2350 - total flux cleaned = -0.0049779 Jy ! Component: 2400 - total flux cleaned = -0.00510241 Jy ! Component: 2450 - total flux cleaned = -0.00522562 Jy ! Component: 2500 - total flux cleaned = -0.00541754 Jy ! Component: 2550 - total flux cleaned = -0.0055384 Jy ! Component: 2600 - total flux cleaned = -0.00565835 Jy ! Component: 2650 - total flux cleaned = -0.00577728 Jy ! Component: 2700 - total flux cleaned = -0.00586151 Jy ! Component: 2750 - total flux cleaned = -0.00599538 Jy ! Component: 2800 - total flux cleaned = -0.00614421 Jy ! Component: 2850 - total flux cleaned = -0.00627542 Jy ! Component: 2900 - total flux cleaned = -0.00635658 Jy ! Component: 2950 - total flux cleaned = -0.00648572 Jy ! Component: 3000 - total flux cleaned = -0.00659798 Jy ! Component: 3050 - total flux cleaned = -0.00667748 Jy ! Component: 3100 - total flux cleaned = -0.00685069 Jy ! Component: 3150 - total flux cleaned = -0.00691319 Jy ! Component: 3200 - total flux cleaned = -0.00699075 Jy ! Component: 3250 - total flux cleaned = -0.00708322 Jy ! Component: 3300 - total flux cleaned = -0.00714436 Jy ! Component: 3350 - total flux cleaned = -0.00722022 Jy ! Component: 3400 - total flux cleaned = -0.00731064 Jy ! Component: 3450 - total flux cleaned = -0.00743038 Jy ! Component: 3500 - total flux cleaned = -0.00754902 Jy ! Component: 3550 - total flux cleaned = -0.00762246 Jy ! Component: 3600 - total flux cleaned = -0.00768113 Jy ! Component: 3650 - total flux cleaned = -0.00779732 Jy ! Component: 3700 - total flux cleaned = -0.00784078 Jy ! Component: 3750 - total flux cleaned = -0.00791246 Jy ! Component: 3800 - total flux cleaned = -0.0079979 Jy ! Component: 3850 - total flux cleaned = -0.00806846 Jy ! Component: 3900 - total flux cleaned = -0.00809668 Jy ! Component: 3950 - total flux cleaned = -0.00816644 Jy ! Component: 4000 - total flux cleaned = -0.00819412 Jy ! Component: 4050 - total flux cleaned = -0.00826293 Jy ! Total flux subtracted in 4096 components = -0.00835847 Jy ! Clean residual min=-0.000938 max=0.000898 Jy/beam ! Clean residual mean=-0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.146132 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 294 components and 0.146132 Jy ![Exited script file: muppet] wmap "J1400-1858_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.918 x 8.283 at -1.573 degrees (North through East) ! Clean map min=-0.0021163 max=0.16846 Jy/beam ! Writing clean map to FITS file: J1400-1858_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168464 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236098 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.420441 0.420441 0.840882 1.68176 3.36353 6.72706 13.4541 26.9082 53.8165 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.918 x 8.283 at -1.573 degrees (North through East) ! Clean map min=-0.0021163 max=0.16846 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1400-1858_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:43 2019