! Started logfile: J1359-4152_S_2017_06_15_pus_uvs.log on Tue May 7 15:20:44 2019 obs J1359-4152_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1359-4152_S_2017_06_15_pus_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.291253 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1359-4152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 7392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1359-4152_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 852 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 910 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 934 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1153 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993747Jy sigma=0.006404 ! Fit after self-cal, rms=0.938849Jy sigma=0.006060 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.311 mas, bmaj=8.594 mas, bpa=-11.98 degrees ! Estimated noise=3963.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657527 Jy ! Component: 100 - total flux cleaned = 0.086349 Jy ! Total flux subtracted in 100 components = 0.086349 Jy ! Clean residual min=-0.016541 max=0.022690 Jy/beam ! Clean residual mean=0.000128 rms=0.004991 Jy/beam ! Combined flux in latest and established models = 0.086349 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.086349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102157Jy sigma=0.000642 ! Fit after self-cal, rms=0.100634Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=8.184 mas, bpa=-11.34 degrees ! Estimated noise=1590.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00840393 Jy ! Component: 100 - total flux cleaned = -0.00960635 Jy ! Component: 150 - total flux cleaned = -0.00924781 Jy ! Component: 200 - total flux cleaned = -0.00894292 Jy ! Total flux subtracted in 200 components = -0.00894292 Jy ! Clean residual min=-0.004822 max=0.005753 Jy/beam ! Clean residual mean=0.000010 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.0774061 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 44 components and 0.0774061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100030Jy sigma=0.000625 ! Fit after self-cal, rms=0.099848Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.43 KP 1.00* ! LA 1.02 MK 0.89 NL 1.13 OV 0.97 ! PT 1.08 SC 1.02 ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.17 KP 0.47 ! LA 0.86 MK 1.04 NL 1.42 OV 1.04 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.20 KP 0.65 ! LA 1.16 MK 0.96 NL 1.23 OV 0.88 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.99 KP 1.00* ! LA 1.00* MK 0.80 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.099848Jy sigma=0.000625 ! Fit after self-cal, rms=0.103778Jy sigma=0.000616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=8.019 mas, bpa=-11.51 degrees ! Estimated noise=1694.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11496e-05 Jy ! Component: 100 - total flux cleaned = 0.000319842 Jy ! Component: 150 - total flux cleaned = 0.000576929 Jy ! Component: 200 - total flux cleaned = 0.00079676 Jy ! Total flux subtracted in 200 components = 0.00079676 Jy ! Clean residual min=-0.003357 max=0.003673 Jy/beam ! Clean residual mean=0.000010 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.0782029 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.0782029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103707Jy sigma=0.000615 ! Fit after self-cal, rms=0.103898Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103898Jy sigma=0.000614 ! Fit after self-cal, rms=0.105761Jy sigma=0.000612 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=7.971 mas, bpa=-11.55 degrees ! Estimated noise=1697.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463958 Jy ! Component: 100 - total flux cleaned = 0.000741788 Jy ! Component: 150 - total flux cleaned = 0.000835381 Jy ! Component: 200 - total flux cleaned = 0.000917091 Jy ! Total flux subtracted in 200 components = 0.000917091 Jy ! Clean residual min=-0.003671 max=0.003129 Jy/beam ! Clean residual mean=0.000002 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.07912 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.07912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105706Jy sigma=0.000612 ! Fit after self-cal, rms=0.105786Jy sigma=0.000612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.71205e-05 Jy ! Component: 100 - total flux cleaned = 0.000112739 Jy ! Component: 150 - total flux cleaned = 0.000111779 Jy ! Component: 200 - total flux cleaned = 0.000187291 Jy ! Total flux subtracted in 200 components = 0.000187291 Jy ! Clean residual min=-0.003679 max=0.003016 Jy/beam ! Clean residual mean=0.000003 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.0793073 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.0793072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105746Jy sigma=0.000611 ! Fit after self-cal, rms=0.105728Jy sigma=0.000611 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105728Jy sigma=0.000611 ! Fit after self-cal, rms=0.106273Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=7.954 mas, bpa=-11.57 degrees ! Estimated noise=1699.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490133 Jy ! Component: 100 - total flux cleaned = 0.000702014 Jy ! Component: 150 - total flux cleaned = 0.000775701 Jy ! Component: 200 - total flux cleaned = 0.000808877 Jy ! Total flux subtracted in 200 components = 0.000808877 Jy ! Clean residual min=-0.003650 max=0.003054 Jy/beam ! Clean residual mean=-0.000000 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0801161 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.0801161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106241Jy sigma=0.000611 ! Fit after self-cal, rms=0.106255Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.85985e-05 Jy ! Component: 100 - total flux cleaned = 0.000143256 Jy ! Component: 150 - total flux cleaned = 0.000175725 Jy ! Component: 200 - total flux cleaned = 0.000204721 Jy ! Total flux subtracted in 200 components = 0.000204721 Jy ! Clean residual min=-0.003587 max=0.003156 Jy/beam ! Clean residual mean=0.000000 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0803208 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.0803208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106230Jy sigma=0.000611 ! Fit after self-cal, rms=0.106211Jy sigma=0.000611 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106211Jy sigma=0.000611 ! Fit after self-cal, rms=0.106404Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.778 mas, bmaj=21.11 mas, bpa=-0.7215 degrees ! Estimated noise=2431.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000795057 Jy ! Component: 100 - total flux cleaned = 0.000930769 Jy ! Component: 150 - total flux cleaned = 0.00100967 Jy ! Component: 200 - total flux cleaned = 0.00110866 Jy ! Total flux subtracted in 200 components = 0.00110866 Jy ! Clean residual min=-0.003243 max=0.002572 Jy/beam ! Clean residual mean=0.000001 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.0814295 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 79 components and 0.0814295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106407Jy sigma=0.000611 ! Fit after self-cal, rms=0.106409Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.16767e-05 Jy ! Component: 100 - total flux cleaned = -3.63153e-05 Jy ! Component: 150 - total flux cleaned = -3.94111e-06 Jy ! Component: 200 - total flux cleaned = 2.48723e-05 Jy ! Total flux subtracted in 200 components = 2.48723e-05 Jy ! Clean residual min=-0.003155 max=0.002584 Jy/beam ! Clean residual mean=0.000003 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.0814544 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 0.0814544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106413Jy sigma=0.000611 ! Fit after self-cal, rms=0.106406Jy sigma=0.000611 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=7.946 mas, bpa=-11.58 degrees ! Estimated noise=1701.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.563 x 7.946 at -11.58 degrees (North through East) ! Clean map min=-0.0092301 max=0.060002 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=8.888 mas, bpa=-11.35 degrees ! Estimated noise=4632.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518161 Jy ! Component: 100 - total flux cleaned = 0.0657637 Jy ! Component: 150 - total flux cleaned = 0.0683914 Jy ! Component: 200 - total flux cleaned = 0.0700955 Jy ! Total flux subtracted in 200 components = 0.0700955 Jy ! Clean residual min=-0.008866 max=0.009593 Jy/beam ! Clean residual mean=0.000070 rms=0.002600 Jy/beam ! Combined flux in latest and established models = 0.0700955 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0700955 Jy ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=7.946 mas, bpa=-11.58 degrees ! Estimated noise=1701.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593839 Jy ! Component: 100 - total flux cleaned = 0.0075337 Jy ! Component: 150 - total flux cleaned = 0.00816265 Jy ! Component: 200 - total flux cleaned = 0.00867081 Jy ! Total flux subtracted in 200 components = 0.00867081 Jy ! Clean residual min=-0.003824 max=0.003715 Jy/beam ! Clean residual mean=-0.000005 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.0787663 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 51 components and 0.0787663 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.778 mas, bmaj=21.11 mas, bpa=-0.7215 degrees ! Estimated noise=2431.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168246 Jy ! Component: 100 - total flux cleaned = 0.00186141 Jy ! Component: 150 - total flux cleaned = 0.00201348 Jy ! Component: 200 - total flux cleaned = 0.00214785 Jy ! Total flux subtracted in 200 components = 0.00214785 Jy ! Clean residual min=-0.003062 max=0.003110 Jy/beam ! Clean residual mean=-0.000001 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.0809142 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117968 Jy ! Component: 100 - total flux cleaned = 0.000221288 Jy ! Component: 150 - total flux cleaned = 0.000339267 Jy ! Component: 200 - total flux cleaned = 0.000415246 Jy ! Total flux subtracted in 200 components = 0.000415246 Jy ! Clean residual min=-0.002944 max=0.002937 Jy/beam ! Clean residual mean=0.000002 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.0813294 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.0813294 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=7.946 mas, bpa=-11.58 degrees ! Estimated noise=1701.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000753148 Jy ! Component: 100 - total flux cleaned = -0.000493939 Jy ! Component: 150 - total flux cleaned = -0.00044846 Jy ! Component: 200 - total flux cleaned = -0.00052519 Jy ! Total flux subtracted in 200 components = -0.00052519 Jy ! Clean residual min=-0.003520 max=0.003268 Jy/beam ! Clean residual mean=-0.000001 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0808042 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.0808042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106391Jy sigma=0.000611 ! Fit after self-cal, rms=0.106349Jy sigma=0.000611 wmodel J1359-4152_S_2017_06_15_pus_map.mod ! Writing 71 model components to file: J1359-4152_S_2017_06_15_pus_map.mod wobs J1359-4152_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1359-4152_S_2017_06_15_pus_uvs.fits wwins J1359-4152_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J1359-4152_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171282 Jy ! Component: 100 - total flux cleaned = -0.000177442 Jy ! Component: 150 - total flux cleaned = -0.000530646 Jy ! Component: 200 - total flux cleaned = -0.000734424 Jy ! Component: 250 - total flux cleaned = -0.000848889 Jy ! Component: 300 - total flux cleaned = -0.000885735 Jy ! Component: 350 - total flux cleaned = -0.000851087 Jy ! Component: 400 - total flux cleaned = -0.000816959 Jy ! Component: 450 - total flux cleaned = -0.000625063 Jy ! Component: 500 - total flux cleaned = -0.000594858 Jy ! Component: 550 - total flux cleaned = -0.0004759 Jy ! Component: 600 - total flux cleaned = -0.000275509 Jy ! Component: 650 - total flux cleaned = -0.000136032 Jy ! Component: 700 - total flux cleaned = 5.4618e-05 Jy ! Component: 750 - total flux cleaned = 0.000134269 Jy ! Component: 800 - total flux cleaned = 0.000212715 Jy ! Component: 850 - total flux cleaned = 0.000314352 Jy ! Component: 900 - total flux cleaned = 0.000363835 Jy ! Component: 950 - total flux cleaned = 0.000461635 Jy ! Component: 1000 - total flux cleaned = 0.000533453 Jy ! Component: 1050 - total flux cleaned = 0.000532771 Jy ! Component: 1100 - total flux cleaned = 0.000601781 Jy ! Component: 1150 - total flux cleaned = 0.0005784 Jy ! Component: 1200 - total flux cleaned = 0.000555439 Jy ! Component: 1250 - total flux cleaned = 0.000510963 Jy ! Component: 1300 - total flux cleaned = 0.000467334 Jy ! Component: 1350 - total flux cleaned = 0.000424544 Jy ! Component: 1400 - total flux cleaned = 0.000424535 Jy ! Component: 1450 - total flux cleaned = 0.000424667 Jy ! Component: 1500 - total flux cleaned = 0.000404095 Jy ! Component: 1550 - total flux cleaned = 0.0003838 Jy ! Component: 1600 - total flux cleaned = 0.000323034 Jy ! Component: 1650 - total flux cleaned = 0.000303118 Jy ! Component: 1700 - total flux cleaned = 0.000302911 Jy ! Component: 1750 - total flux cleaned = 0.000283062 Jy ! Component: 1800 - total flux cleaned = 0.000282822 Jy ! Component: 1850 - total flux cleaned = 0.000244216 Jy ! Component: 1900 - total flux cleaned = 0.000148387 Jy ! Component: 1950 - total flux cleaned = 0.000167368 Jy ! Component: 2000 - total flux cleaned = 3.52577e-05 Jy ! Component: 2050 - total flux cleaned = -3.96188e-05 Jy ! Component: 2100 - total flux cleaned = -9.55089e-05 Jy ! Component: 2150 - total flux cleaned = -0.000132628 Jy ! Component: 2200 - total flux cleaned = -0.000205997 Jy ! Component: 2250 - total flux cleaned = -0.000224341 Jy ! Component: 2300 - total flux cleaned = -0.000315285 Jy ! Component: 2350 - total flux cleaned = -0.000387552 Jy ! Component: 2400 - total flux cleaned = -0.00044153 Jy ! Component: 2450 - total flux cleaned = -0.000549025 Jy ! Component: 2500 - total flux cleaned = -0.000584717 Jy ! Component: 2550 - total flux cleaned = -0.000638122 Jy ! Component: 2600 - total flux cleaned = -0.000673573 Jy ! Component: 2650 - total flux cleaned = -0.000779537 Jy ! Component: 2700 - total flux cleaned = -0.000797202 Jy ! Component: 2750 - total flux cleaned = -0.000867403 Jy ! Component: 2800 - total flux cleaned = -0.000867404 Jy ! Component: 2850 - total flux cleaned = -0.000919953 Jy ! Component: 2900 - total flux cleaned = -0.000920042 Jy ! Component: 2950 - total flux cleaned = -0.00098993 Jy ! Component: 3000 - total flux cleaned = -0.00100738 Jy ! Component: 3050 - total flux cleaned = -0.00104231 Jy ! Component: 3100 - total flux cleaned = -0.00109471 Jy ! Component: 3150 - total flux cleaned = -0.00109467 Jy ! Component: 3200 - total flux cleaned = -0.00112959 Jy ! Component: 3250 - total flux cleaned = -0.0012522 Jy ! Component: 3300 - total flux cleaned = -0.00128732 Jy ! Component: 3350 - total flux cleaned = -0.00132246 Jy ! Component: 3400 - total flux cleaned = -0.00133992 Jy ! Component: 3450 - total flux cleaned = -0.00137506 Jy ! Component: 3500 - total flux cleaned = -0.00142786 Jy ! Component: 3550 - total flux cleaned = -0.00148063 Jy ! Component: 3600 - total flux cleaned = -0.00155131 Jy ! Component: 3650 - total flux cleaned = -0.0015513 Jy ! Component: 3700 - total flux cleaned = -0.0015513 Jy ! Component: 3750 - total flux cleaned = -0.00160454 Jy ! Component: 3800 - total flux cleaned = -0.0016402 Jy ! Component: 3850 - total flux cleaned = -0.00167584 Jy ! Component: 3900 - total flux cleaned = -0.00171146 Jy ! Component: 3950 - total flux cleaned = -0.00172936 Jy ! Component: 4000 - total flux cleaned = -0.0017652 Jy ! Component: 4050 - total flux cleaned = -0.0017832 Jy ! Total flux subtracted in 4096 components = -0.00178319 Jy ! Clean residual min=-0.001310 max=0.001262 Jy/beam ! Clean residual mean=0.000019 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.079021 Jy keep ! Adding 203 model components to the UV plane model. ! The established model now contains 274 components and 0.079021 Jy ![Exited script file: muppet] wmap "J1359-4152_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.563 x 7.946 at -11.58 degrees (North through East) ! Clean map min=-0.0082169 max=0.060673 Jy/beam ! Writing clean map to FITS file: J1359-4152_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0606732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000298186 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.47439 1.47439 2.94877 5.89755 11.7951 23.5902 47.1804 94.3608 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.563 x 7.946 at -11.58 degrees (North through East) ! Clean map min=-0.0082169 max=0.060673 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1359-4152_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:20:49 2019