! Started logfile: J1358+1119_X_2017_06_10_pus_uvs.log on Mon May 6 12:48:49 2019 obs J1358+1119_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1358+1119_X_2017_06_10_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.850154 visibilities/baseline/integration-bin. ! Found source: J1358+1119 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 66108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1358+1119_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918809Jy sigma=0.008407 ! Fit after self-cal, rms=0.904902Jy sigma=0.008282 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8305 mas, bmaj=1.666 mas, bpa=5.024 degrees ! Estimated noise=643.479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722817 Jy ! Component: 100 - total flux cleaned = 0.0926138 Jy ! Total flux subtracted in 100 components = 0.0926138 Jy ! Clean residual min=-0.003679 max=0.010412 Jy/beam ! Clean residual mean=-0.000018 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.0926138 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0926138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078665Jy sigma=0.000687 ! Fit after self-cal, rms=0.078618Jy sigma=0.000686 ! Inverting map ! Added new window around map position (1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114376 Jy ! Component: 100 - total flux cleaned = 0.0179543 Jy ! Total flux subtracted in 100 components = 0.0179543 Jy ! Clean residual min=-0.002169 max=0.003364 Jy/beam ! Clean residual mean=-0.000008 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.110568 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.110568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076639Jy sigma=0.000666 ! Fit after self-cal, rms=0.076595Jy sigma=0.000666 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455582 Jy ! Component: 100 - total flux cleaned = 0.00729563 Jy ! Total flux subtracted in 100 components = 0.00729563 Jy ! Clean residual min=-0.001755 max=0.001746 Jy/beam ! Clean residual mean=-0.000005 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.117864 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.117864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076281Jy sigma=0.000662 ! Fit after self-cal, rms=0.076275Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=1.935 mas, bpa=3.715 degrees ! Estimated noise=304.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275829 Jy ! Component: 100 - total flux cleaned = 0.00437197 Jy ! Component: 150 - total flux cleaned = 0.0054477 Jy ! Component: 200 - total flux cleaned = 0.00620439 Jy ! Total flux subtracted in 200 components = 0.00620439 Jy ! Clean residual min=-0.001147 max=0.001287 Jy/beam ! Clean residual mean=-0.000005 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.124068 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 50 components and 0.124068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076173Jy sigma=0.000661 ! Fit after self-cal, rms=0.076170Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.01 KP 1.03 ! LA 0.97 MK 1.03 NL 0.97 OV 0.99 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.97 KP 0.99 ! LA 0.96 MK 1.00 NL 0.99 OV 1.02 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 1.00 ! LA 1.02 MK 1.04 NL 0.98 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.04 KP 1.00 ! LA 1.01 MK 1.01 NL 0.96 OV 1.02 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.97 KP 1.01 ! LA 0.96 MK 1.04 NL 0.98 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 0.99 ! LA 1.00 MK 1.03 NL 0.98 OV 0.99 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.01 KP 1.00 ! LA 1.01 MK 1.05 NL 0.99 OV 1.01 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 1.02 KP 0.99 ! LA 1.00 MK 0.99 NL 0.99 OV 1.00 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.99 KP 1.03 ! LA 1.00 MK 1.01 NL 1.00 OV 1.01 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 0.99 ! LA 1.01 MK 1.01 NL 0.98 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.04 KP 1.00 ! LA 1.00 MK 0.98 NL 0.97 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.97 KP 0.94 ! LA 1.00 MK 1.12 NL 0.99 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.076170Jy sigma=0.000661 ! Fit after self-cal, rms=0.076288Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.943 mas, bpa=3.697 degrees ! Estimated noise=304.526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137994 Jy ! Component: 100 - total flux cleaned = 0.00197174 Jy ! Component: 150 - total flux cleaned = 0.00223845 Jy ! Component: 200 - total flux cleaned = 0.00244026 Jy ! Total flux subtracted in 200 components = 0.00244026 Jy ! Clean residual min=-0.001003 max=0.000909 Jy/beam ! Clean residual mean=-0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.126508 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 73 components and 0.126508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076261Jy sigma=0.000660 ! Fit after self-cal, rms=0.076265Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076265Jy sigma=0.000660 ! Fit after self-cal, rms=0.076683Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=1.941 mas, bpa=3.724 degrees ! Estimated noise=304.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339668 Jy ! Component: 100 - total flux cleaned = 0.000622464 Jy ! Component: 150 - total flux cleaned = 0.000746253 Jy ! Component: 200 - total flux cleaned = 0.000839601 Jy ! Total flux subtracted in 200 components = 0.000839601 Jy ! Clean residual min=-0.000756 max=0.000765 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.127348 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.127348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076674Jy sigma=0.000659 ! Fit after self-cal, rms=0.076687Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.93569e-05 Jy ! Component: 100 - total flux cleaned = 0.000157949 Jy ! Component: 150 - total flux cleaned = 0.000241714 Jy ! Component: 200 - total flux cleaned = 0.000284876 Jy ! Total flux subtracted in 200 components = 0.000284876 Jy ! Clean residual min=-0.000744 max=0.000740 Jy/beam ! Clean residual mean=0.000000 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.127633 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.127633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076682Jy sigma=0.000659 ! Fit after self-cal, rms=0.076681Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076681Jy sigma=0.000659 ! Fit after self-cal, rms=0.076726Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.941 mas, bpa=3.627 degrees ! Estimated noise=304.491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.6763e-05 Jy ! Component: 100 - total flux cleaned = 0.000264521 Jy ! Component: 150 - total flux cleaned = 0.000349892 Jy ! Component: 200 - total flux cleaned = 0.000406928 Jy ! Total flux subtracted in 200 components = 0.000406928 Jy ! Clean residual min=-0.000725 max=0.000746 Jy/beam ! Clean residual mean=-0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.12804 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.12804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076722Jy sigma=0.000659 ! Fit after self-cal, rms=0.076722Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.92351e-05 Jy ! Component: 100 - total flux cleaned = 8.7774e-05 Jy ! Component: 150 - total flux cleaned = 0.000140843 Jy ! Component: 200 - total flux cleaned = 0.000181442 Jy ! Total flux subtracted in 200 components = 0.000181442 Jy ! Clean residual min=-0.000716 max=0.000726 Jy/beam ! Clean residual mean=0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.128221 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.128221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076720Jy sigma=0.000659 ! Fit after self-cal, rms=0.076719Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076719Jy sigma=0.000659 ! Fit after self-cal, rms=0.076722Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.12 mas, bmaj=2.93 mas, bpa=-1.022 degrees ! Estimated noise=370.463 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191999 Jy ! Component: 100 - total flux cleaned = 0.000302433 Jy ! Component: 150 - total flux cleaned = 0.000387511 Jy ! Component: 200 - total flux cleaned = 0.000448878 Jy ! Total flux subtracted in 200 components = 0.000448878 Jy ! Clean residual min=-0.000648 max=0.000725 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.12867 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.12867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076721Jy sigma=0.000659 ! Fit after self-cal, rms=0.076720Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.61937e-06 Jy ! Component: 100 - total flux cleaned = 6.44654e-05 Jy ! Component: 150 - total flux cleaned = 0.000115315 Jy ! Component: 200 - total flux cleaned = 0.000156063 Jy ! Total flux subtracted in 200 components = 0.000156063 Jy ! Clean residual min=-0.000652 max=0.000726 Jy/beam ! Clean residual mean=0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.128826 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 0.128826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076720Jy sigma=0.000659 ! Fit after self-cal, rms=0.076719Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.942 mas, bpa=3.537 degrees ! Estimated noise=304.458 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.023 x 1.942 at 3.537 degrees (North through East) ! Clean map min=-0.00064163 max=0.095978 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8353 mas, bmaj=1.671 mas, bpa=4.911 degrees ! Estimated noise=644.114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0719239 Jy ! Component: 100 - total flux cleaned = 0.0937241 Jy ! Component: 150 - total flux cleaned = 0.104923 Jy ! Component: 200 - total flux cleaned = 0.111136 Jy ! Total flux subtracted in 200 components = 0.111136 Jy ! Clean residual min=-0.001947 max=0.003186 Jy/beam ! Clean residual mean=-0.000010 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.111136 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.111136 Jy ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.942 mas, bpa=3.537 degrees ! Estimated noise=304.458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533478 Jy ! Component: 100 - total flux cleaned = 0.00846379 Jy ! Component: 150 - total flux cleaned = 0.0105302 Jy ! Component: 200 - total flux cleaned = 0.0119971 Jy ! Total flux subtracted in 200 components = 0.0119971 Jy ! Clean residual min=-0.000859 max=0.000849 Jy/beam ! Clean residual mean=-0.000007 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.123134 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 67 components and 0.123134 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.12 mas, bmaj=2.93 mas, bpa=-1.022 degrees ! Estimated noise=370.463 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177653 Jy ! Component: 100 - total flux cleaned = 0.00289996 Jy ! Component: 150 - total flux cleaned = 0.00368793 Jy ! Component: 200 - total flux cleaned = 0.00425441 Jy ! Total flux subtracted in 200 components = 0.00425441 Jy ! Clean residual min=-0.000702 max=0.000758 Jy/beam ! Clean residual mean=-0.000003 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.127388 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410013 Jy ! Component: 100 - total flux cleaned = 0.000708011 Jy ! Component: 150 - total flux cleaned = 0.000926934 Jy ! Component: 200 - total flux cleaned = 0.0010896 Jy ! Total flux subtracted in 200 components = 0.0010896 Jy ! Clean residual min=-0.000650 max=0.000733 Jy/beam ! Clean residual mean=0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.128478 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 140 components and 0.128478 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.942 mas, bpa=3.537 degrees ! Estimated noise=304.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176545 Jy ! Component: 100 - total flux cleaned = 0.000228326 Jy ! Component: 150 - total flux cleaned = 0.00026274 Jy ! Component: 200 - total flux cleaned = 0.000282963 Jy ! Total flux subtracted in 200 components = 0.000282963 Jy ! Clean residual min=-0.000719 max=0.000759 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.128761 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 151 components and 0.128761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076720Jy sigma=0.000659 ! Fit after self-cal, rms=0.076716Jy sigma=0.000659 wmodel J1358+1119_X_2017_06_10_pus_map.mod ! Writing 151 model components to file: J1358+1119_X_2017_06_10_pus_map.mod wobs J1358+1119_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1358+1119_X_2017_06_10_pus_uvs.fits wwins J1358+1119_X_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1358+1119_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110107 Jy ! Component: 100 - total flux cleaned = 0.000180397 Jy ! Component: 150 - total flux cleaned = 0.000336318 Jy ! Component: 200 - total flux cleaned = 0.000432865 Jy ! Component: 250 - total flux cleaned = 0.00048453 Jy ! Component: 300 - total flux cleaned = 0.000554694 Jy ! Component: 350 - total flux cleaned = 0.00062257 Jy ! Component: 400 - total flux cleaned = 0.000669969 Jy ! Component: 450 - total flux cleaned = 0.000735083 Jy ! Component: 500 - total flux cleaned = 0.000771344 Jy ! Component: 550 - total flux cleaned = 0.000762408 Jy ! Component: 600 - total flux cleaned = 0.000788552 Jy ! Component: 650 - total flux cleaned = 0.000780012 Jy ! Component: 700 - total flux cleaned = 0.000822483 Jy ! Component: 750 - total flux cleaned = 0.000839045 Jy ! Component: 800 - total flux cleaned = 0.000863402 Jy ! Component: 850 - total flux cleaned = 0.000839188 Jy ! Component: 900 - total flux cleaned = 0.000831365 Jy ! Component: 950 - total flux cleaned = 0.000839262 Jy ! Component: 1000 - total flux cleaned = 0.000839273 Jy ! Component: 1050 - total flux cleaned = 0.000831677 Jy ! Component: 1100 - total flux cleaned = 0.000816579 Jy ! Component: 1150 - total flux cleaned = 0.000786646 Jy ! Component: 1200 - total flux cleaned = 0.000786894 Jy ! Component: 1250 - total flux cleaned = 0.000801461 Jy ! Component: 1300 - total flux cleaned = 0.000823099 Jy ! Component: 1350 - total flux cleaned = 0.000815976 Jy ! Component: 1400 - total flux cleaned = 0.000844248 Jy ! Component: 1450 - total flux cleaned = 0.000816149 Jy ! Component: 1500 - total flux cleaned = 0.000837042 Jy ! Component: 1550 - total flux cleaned = 0.000830053 Jy ! Component: 1600 - total flux cleaned = 0.000850455 Jy ! Component: 1650 - total flux cleaned = 0.000850509 Jy ! Component: 1700 - total flux cleaned = 0.000857196 Jy ! Component: 1750 - total flux cleaned = 0.00087051 Jy ! Component: 1800 - total flux cleaned = 0.000890191 Jy ! Component: 1850 - total flux cleaned = 0.000896624 Jy ! Component: 1900 - total flux cleaned = 0.000903026 Jy ! Component: 1950 - total flux cleaned = 0.000909286 Jy ! Component: 2000 - total flux cleaned = 0.000921927 Jy ! Total flux subtracted in 2048 components = 0.000903142 Jy ! Clean residual min=-0.000434 max=0.000373 Jy/beam ! Clean residual mean=0.000001 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.129664 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 292 components and 0.129664 Jy ![Exited script file: muppet] wmap "J1358+1119_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.023 x 1.942 at 3.537 degrees (North through East) ! Clean map min=-0.00048496 max=0.096071 Jy/beam ! Writing clean map to FITS file: J1358+1119_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0960712 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000120083 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.374982 0.374982 0.749964 1.49993 2.99986 5.99971 11.9994 23.9989 47.9977 95.9954 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.023 x 1.942 at 3.537 degrees (North through East) ! Clean map min=-0.00048496 max=0.096071 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1358+1119_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:48:53 2019