! Started logfile: J1357-1527_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:45 2019 obs J1357-1527_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1357-1527_S_2017_10_09_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.641026 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357-1527_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.683124Jy sigma=0.005164 ! Fit after self-cal, rms=0.659030Jy sigma=0.004989 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=15 mas, bpa=-13.92 degrees ! Estimated noise=2776.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.259957 Jy ! Component: 100 - total flux cleaned = 0.324272 Jy ! Total flux subtracted in 100 components = 0.324272 Jy ! Clean residual min=-0.020894 max=0.028529 Jy/beam ! Clean residual mean=-0.000079 rms=0.006335 Jy/beam ! Combined flux in latest and established models = 0.324272 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.324272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136091Jy sigma=0.000934 ! Fit after self-cal, rms=0.136072Jy sigma=0.000934 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=15.49 mas, bpa=-13 degrees ! Estimated noise=2357.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462602 Jy ! Component: 100 - total flux cleaned = 0.0753365 Jy ! Component: 150 - total flux cleaned = 0.0955545 Jy ! Component: 200 - total flux cleaned = 0.110036 Jy ! Total flux subtracted in 200 components = 0.110036 Jy ! Clean residual min=-0.011007 max=0.017680 Jy/beam ! Clean residual mean=-0.000042 rms=0.003699 Jy/beam ! Combined flux in latest and established models = 0.434308 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 102 components and 0.434308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115105Jy sigma=0.000791 ! Fit after self-cal, rms=0.115020Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.91 HN 1.02 KP 1.09 ! LA 1.02 MK 1.04 NL 0.89 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 0.94 HN 1.08 KP 1.02 ! LA 0.95 MK 1.05 NL 1.08 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.03 KP 0.90 ! LA 0.76 MK 1.04 NL 1.22 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.115020Jy sigma=0.000790 ! Fit after self-cal, rms=0.097757Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=15.92 mas, bpa=-13.02 degrees ! Estimated noise=2363.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00291444 Jy ! Component: 100 - total flux cleaned = -0.00400187 Jy ! Component: 150 - total flux cleaned = -0.00450791 Jy ! Component: 200 - total flux cleaned = -0.00499199 Jy ! Total flux subtracted in 200 components = -0.00499199 Jy ! Clean residual min=-0.007752 max=0.008500 Jy/beam ! Clean residual mean=-0.000017 rms=0.002041 Jy/beam ! Combined flux in latest and established models = 0.429316 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 0.429316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097494Jy sigma=0.000671 ! Fit after self-cal, rms=0.097551Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097551Jy sigma=0.000671 ! Fit after self-cal, rms=0.095887Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.692 mas, bmaj=15.85 mas, bpa=-13.14 degrees ! Estimated noise=2358.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101363 Jy ! Component: 100 - total flux cleaned = -0.00119633 Jy ! Component: 150 - total flux cleaned = -0.00126804 Jy ! Component: 200 - total flux cleaned = -0.00133225 Jy ! Total flux subtracted in 200 components = -0.00133225 Jy ! Clean residual min=-0.005324 max=0.005905 Jy/beam ! Clean residual mean=-0.000000 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.427984 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 0.427984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095712Jy sigma=0.000655 ! Fit after self-cal, rms=0.095738Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212856 Jy ! Component: 100 - total flux cleaned = 0.000103369 Jy ! Component: 150 - total flux cleaned = 0.000103584 Jy ! Component: 200 - total flux cleaned = 5.8538e-05 Jy ! Total flux subtracted in 200 components = 5.8538e-05 Jy ! Clean residual min=-0.005202 max=0.005908 Jy/beam ! Clean residual mean=0.000000 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.428042 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 137 components and 0.428042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095676Jy sigma=0.000655 ! Fit after self-cal, rms=0.095671Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095671Jy sigma=0.000655 ! Fit after self-cal, rms=0.096113Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.692 mas, bmaj=15.91 mas, bpa=-13.19 degrees ! Estimated noise=2362.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121109 Jy ! Component: 100 - total flux cleaned = -0.00127626 Jy ! Component: 150 - total flux cleaned = -0.00132697 Jy ! Component: 200 - total flux cleaned = -0.00137105 Jy ! Total flux subtracted in 200 components = -0.00137105 Jy ! Clean residual min=-0.005021 max=0.005790 Jy/beam ! Clean residual mean=-0.000000 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.426671 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 144 components and 0.426671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096025Jy sigma=0.000654 ! Fit after self-cal, rms=0.096027Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123183 Jy ! Component: 100 - total flux cleaned = 8.19903e-05 Jy ! Component: 150 - total flux cleaned = 1.27912e-05 Jy ! Component: 200 - total flux cleaned = -5.20642e-05 Jy ! Total flux subtracted in 200 components = -5.20642e-05 Jy ! Clean residual min=-0.005013 max=0.005785 Jy/beam ! Clean residual mean=-0.000000 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.426619 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 146 components and 0.426619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095996Jy sigma=0.000654 ! Fit after self-cal, rms=0.095995Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095995Jy sigma=0.000654 ! Fit after self-cal, rms=0.096361Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.147 mas, bmaj=17.91 mas, bpa=-4.605 degrees ! Estimated noise=2746.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000768752 Jy ! Component: 100 - total flux cleaned = -0.000952521 Jy ! Component: 150 - total flux cleaned = -0.00113252 Jy ! Component: 200 - total flux cleaned = -0.0012209 Jy ! Total flux subtracted in 200 components = -0.0012209 Jy ! Clean residual min=-0.004546 max=0.005451 Jy/beam ! Clean residual mean=0.000002 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.425398 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 154 components and 0.425398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096333Jy sigma=0.000653 ! Fit after self-cal, rms=0.096337Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.51032e-05 Jy ! Component: 100 - total flux cleaned = 5.69499e-05 Jy ! Component: 150 - total flux cleaned = 3.61442e-05 Jy ! Component: 200 - total flux cleaned = 1.70266e-05 Jy ! Total flux subtracted in 200 components = 1.70266e-05 Jy ! Clean residual min=-0.004509 max=0.005445 Jy/beam ! Clean residual mean=0.000002 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.425415 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 160 components and 0.425415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096331Jy sigma=0.000653 ! Fit after self-cal, rms=0.096330Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=15.97 mas, bpa=-13.24 degrees ! Estimated noise=2364.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 15.97 at -13.24 degrees (North through East) ! Clean map min=-0.0047532 max=0.33074 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=15.28 mas, bpa=-14.04 degrees ! Estimated noise=2796.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260586 Jy ! Component: 100 - total flux cleaned = 0.321722 Jy ! Component: 150 - total flux cleaned = 0.350839 Jy ! Component: 200 - total flux cleaned = 0.370139 Jy ! Total flux subtracted in 200 components = 0.370139 Jy ! Clean residual min=-0.008424 max=0.011104 Jy/beam ! Clean residual mean=-0.000033 rms=0.002619 Jy/beam ! Combined flux in latest and established models = 0.370139 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.370139 Jy ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=15.97 mas, bpa=-13.24 degrees ! Estimated noise=2364.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185791 Jy ! Component: 100 - total flux cleaned = 0.0304185 Jy ! Component: 150 - total flux cleaned = 0.0384076 Jy ! Component: 200 - total flux cleaned = 0.0438689 Jy ! Total flux subtracted in 200 components = 0.0438689 Jy ! Clean residual min=-0.005350 max=0.006768 Jy/beam ! Clean residual mean=-0.000012 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.414008 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 103 components and 0.414009 Jy ! Inverting map ! Added new window around map position (-35, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478219 Jy ! Component: 100 - total flux cleaned = 0.00657654 Jy ! Component: 150 - total flux cleaned = 0.00790462 Jy ! Component: 200 - total flux cleaned = 0.00829727 Jy ! Total flux subtracted in 200 components = 0.00829727 Jy ! Clean residual min=-0.004579 max=0.004572 Jy/beam ! Clean residual mean=-0.000001 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.422306 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 132 components and 0.422306 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.147 mas, bmaj=17.91 mas, bpa=-4.605 degrees ! Estimated noise=2746.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133633 Jy ! Component: 100 - total flux cleaned = 0.00180182 Jy ! Component: 150 - total flux cleaned = 0.00212931 Jy ! Component: 200 - total flux cleaned = 0.00230077 Jy ! Total flux subtracted in 200 components = 0.00230077 Jy ! Clean residual min=-0.003865 max=0.004477 Jy/beam ! Clean residual mean=0.000005 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.424607 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.33457e-06 Jy ! Component: 100 - total flux cleaned = 4.74075e-05 Jy ! Component: 150 - total flux cleaned = 9.50675e-05 Jy ! Component: 200 - total flux cleaned = 0.000182651 Jy ! Total flux subtracted in 200 components = 0.000182651 Jy ! Clean residual min=-0.003621 max=0.004129 Jy/beam ! Clean residual mean=0.000006 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.424789 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 166 components and 0.424789 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=15.97 mas, bpa=-13.24 degrees ! Estimated noise=2364.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216482 Jy ! Component: 100 - total flux cleaned = 1.08019e-05 Jy ! Component: 150 - total flux cleaned = 0.000268511 Jy ! Component: 200 - total flux cleaned = 0.000413094 Jy ! Total flux subtracted in 200 components = 0.000413094 Jy ! Clean residual min=-0.003918 max=0.004178 Jy/beam ! Clean residual mean=0.000002 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.425202 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 195 components and 0.425202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095771Jy sigma=0.000650 ! Fit after self-cal, rms=0.095726Jy sigma=0.000649 wmodel J1357-1527_S_2017_10_09_pus_map.mod ! Writing 195 model components to file: J1357-1527_S_2017_10_09_pus_map.mod wobs J1357-1527_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1357-1527_S_2017_10_09_pus_uvs.fits wwins J1357-1527_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1357-1527_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687976 Jy ! Component: 100 - total flux cleaned = 0.00102721 Jy ! Component: 150 - total flux cleaned = 0.0015312 Jy ! Component: 200 - total flux cleaned = 0.00189133 Jy ! Component: 250 - total flux cleaned = 0.00234984 Jy ! Component: 300 - total flux cleaned = 0.00262373 Jy ! Component: 350 - total flux cleaned = 0.00283433 Jy ! Component: 400 - total flux cleaned = 0.00299007 Jy ! Component: 450 - total flux cleaned = 0.00318912 Jy ! Component: 500 - total flux cleaned = 0.0032377 Jy ! Component: 550 - total flux cleaned = 0.00333021 Jy ! Component: 600 - total flux cleaned = 0.00351041 Jy ! Component: 650 - total flux cleaned = 0.00364289 Jy ! Component: 700 - total flux cleaned = 0.00364406 Jy ! Component: 750 - total flux cleaned = 0.00368602 Jy ! Component: 800 - total flux cleaned = 0.00364474 Jy ! Component: 850 - total flux cleaned = 0.00364495 Jy ! Component: 900 - total flux cleaned = 0.00364531 Jy ! Component: 950 - total flux cleaned = 0.00364529 Jy ! Component: 1000 - total flux cleaned = 0.00360806 Jy ! Component: 1050 - total flux cleaned = 0.00349837 Jy ! Component: 1100 - total flux cleaned = 0.00346195 Jy ! Component: 1150 - total flux cleaned = 0.00328568 Jy ! Component: 1200 - total flux cleaned = 0.00321677 Jy ! Component: 1250 - total flux cleaned = 0.00311522 Jy ! Component: 1300 - total flux cleaned = 0.00308299 Jy ! Component: 1350 - total flux cleaned = 0.00304995 Jy ! Component: 1400 - total flux cleaned = 0.00288798 Jy ! Component: 1450 - total flux cleaned = 0.0027605 Jy ! Component: 1500 - total flux cleaned = 0.00250914 Jy ! Component: 1550 - total flux cleaned = 0.00238508 Jy ! Component: 1600 - total flux cleaned = 0.00210988 Jy ! Component: 1650 - total flux cleaned = 0.00201896 Jy ! Component: 1700 - total flux cleaned = 0.00175048 Jy ! Component: 1750 - total flux cleaned = 0.00154496 Jy ! Component: 1800 - total flux cleaned = 0.00142872 Jy ! Component: 1850 - total flux cleaned = 0.00125643 Jy ! Component: 1900 - total flux cleaned = 0.00108604 Jy ! Component: 1950 - total flux cleaned = 0.000945597 Jy ! Component: 2000 - total flux cleaned = 0.000806578 Jy ! Component: 2050 - total flux cleaned = 0.0006415 Jy ! Component: 2100 - total flux cleaned = 0.000478205 Jy ! Component: 2150 - total flux cleaned = 0.000451198 Jy ! Component: 2200 - total flux cleaned = 0.000317834 Jy ! Component: 2250 - total flux cleaned = 0.000212498 Jy ! Component: 2300 - total flux cleaned = 0.000134218 Jy ! Component: 2350 - total flux cleaned = 4.5349e-06 Jy ! Component: 2400 - total flux cleaned = -4.69481e-05 Jy ! Component: 2450 - total flux cleaned = -0.000250698 Jy ! Component: 2500 - total flux cleaned = -0.000376812 Jy ! Component: 2550 - total flux cleaned = -0.000427101 Jy ! Component: 2600 - total flux cleaned = -0.000501734 Jy ! Component: 2650 - total flux cleaned = -0.000551313 Jy ! Component: 2700 - total flux cleaned = -0.000673969 Jy ! Component: 2750 - total flux cleaned = -0.000747143 Jy ! Component: 2800 - total flux cleaned = -0.000843861 Jy ! Component: 2850 - total flux cleaned = -0.000963854 Jy ! Component: 2900 - total flux cleaned = -0.00105899 Jy ! Component: 2950 - total flux cleaned = -0.00108264 Jy ! Component: 3000 - total flux cleaned = -0.00120043 Jy ! Component: 3050 - total flux cleaned = -0.00124726 Jy ! Component: 3100 - total flux cleaned = -0.00136361 Jy ! Component: 3150 - total flux cleaned = -0.00145594 Jy ! Component: 3200 - total flux cleaned = -0.00157038 Jy ! Component: 3250 - total flux cleaned = -0.0015249 Jy ! Component: 3300 - total flux cleaned = -0.00166088 Jy ! Component: 3350 - total flux cleaned = -0.00177353 Jy ! Component: 3400 - total flux cleaned = -0.00184091 Jy ! Component: 3450 - total flux cleaned = -0.00197458 Jy ! Component: 3500 - total flux cleaned = -0.00201888 Jy ! Component: 3550 - total flux cleaned = -0.00210704 Jy ! Component: 3600 - total flux cleaned = -0.00223834 Jy ! Component: 3650 - total flux cleaned = -0.00234707 Jy ! Component: 3700 - total flux cleaned = -0.00241203 Jy ! Component: 3750 - total flux cleaned = -0.00245525 Jy ! Component: 3800 - total flux cleaned = -0.00251958 Jy ! Component: 3850 - total flux cleaned = -0.002541 Jy ! Component: 3900 - total flux cleaned = -0.00264717 Jy ! Component: 3950 - total flux cleaned = -0.00264723 Jy ! Component: 4000 - total flux cleaned = -0.0027105 Jy ! Component: 4050 - total flux cleaned = -0.00271054 Jy ! Total flux subtracted in 4096 components = -0.00277319 Jy ! Clean residual min=-0.001164 max=0.001188 Jy/beam ! Clean residual mean=-0.000000 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.422429 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 468 components and 0.422429 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 15.97 at -13.24 degrees (North through East) ! Clean map min=-0.0028708 max=0.33421 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.334209 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000369987 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332115 0.332115 0.664231 1.32846 2.65692 5.31385 10.6277 21.2554 42.5108 85.0215 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.334 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 15.97 at -13.24 degrees (North through East) ! Clean map min=-0.0028708 max=0.33421 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357-1527_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:13:50 2019