! Started logfile: J1357-1527_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:29 2019 obs J1357-1527_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1357-1527_S_2017_04_28_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.691667 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357-1527_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.630269Jy sigma=0.032811 ! Fit after self-cal, rms=0.629892Jy sigma=0.032319 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=7.367 mas, bpa=-18.16 degrees ! Estimated noise=1340.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139696 Jy ! Component: 100 - total flux cleaned = 0.200874 Jy ! Total flux subtracted in 100 components = 0.200874 Jy ! Clean residual min=-0.050075 max=0.066031 Jy/beam ! Clean residual mean=0.000454 rms=0.016734 Jy/beam ! Combined flux in latest and established models = 0.200874 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.200874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258931Jy sigma=0.005590 ! Fit after self-cal, rms=0.258315Jy sigma=0.005589 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=8.06 mas, bpa=-12.82 degrees ! Estimated noise=1259.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216078 Jy ! Component: 100 - total flux cleaned = 0.0194951 Jy ! Component: 150 - total flux cleaned = 0.0168492 Jy ! Component: 200 - total flux cleaned = 0.0153825 Jy ! Total flux subtracted in 200 components = 0.0153825 Jy ! Clean residual min=-0.060087 max=0.072735 Jy/beam ! Clean residual mean=0.000306 rms=0.019057 Jy/beam ! Combined flux in latest and established models = 0.216256 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.216256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225590Jy sigma=0.006258 ! Fit after self-cal, rms=0.225503Jy sigma=0.006258 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 0.66 HN 0.82 KP 0.70 ! LA 0.67 MK 1.00* NL 0.69 OV 0.72 ! PT 0.73 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.58 HN 0.82 KP 0.66 ! LA 0.67 MK 1.00* NL 0.85 OV 0.76 ! PT 0.74 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.63 HN 0.78 KP 0.68 ! LA 0.67 MK 4.00 NL 0.80 OV 0.70 ! PT 0.70 SC 0.95 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.69 HN 0.81 KP 1.00* ! LA 22.19 MK 0.30 NL 1.00* OV 1.00* ! PT 0.75 SC 1.00* ! ! ! Fit before self-cal, rms=0.225503Jy sigma=0.006258 ! Fit after self-cal, rms=0.061238Jy sigma=0.000736 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.988 mas, bmaj=8.287 mas, bpa=1.433 degrees ! Estimated noise=1361.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111649 Jy ! Component: 100 - total flux cleaned = 0.00128157 Jy ! Component: 150 - total flux cleaned = 0.00126735 Jy ! Component: 200 - total flux cleaned = 0.001136 Jy ! Total flux subtracted in 200 components = 0.001136 Jy ! Clean residual min=-0.006964 max=0.006608 Jy/beam ! Clean residual mean=0.000004 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.217392 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.217392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060421Jy sigma=0.000725 ! Fit after self-cal, rms=0.059750Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059750Jy sigma=0.000712 ! Fit after self-cal, rms=0.057516Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=8.289 mas, bpa=1.214 degrees ! Estimated noise=1356.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158794 Jy ! Component: 100 - total flux cleaned = 0.00184642 Jy ! Component: 150 - total flux cleaned = 0.00195496 Jy ! Component: 200 - total flux cleaned = 0.00205353 Jy ! Total flux subtracted in 200 components = 0.00205353 Jy ! Clean residual min=-0.004421 max=0.004766 Jy/beam ! Clean residual mean=-0.000003 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.219446 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.219446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056974Jy sigma=0.000669 ! Fit after self-cal, rms=0.056955Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, 38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266004 Jy ! Component: 100 - total flux cleaned = 0.00278524 Jy ! Component: 150 - total flux cleaned = 0.00278745 Jy ! Component: 200 - total flux cleaned = 0.00287691 Jy ! Total flux subtracted in 200 components = 0.00287691 Jy ! Clean residual min=-0.003817 max=0.004488 Jy/beam ! Clean residual mean=-0.000004 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.222323 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.222323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056416Jy sigma=0.000662 ! Fit after self-cal, rms=0.056394Jy sigma=0.000662 ! Inverting map ! Added new window around map position (-19.5, 73.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293096 Jy ! Component: 100 - total flux cleaned = 0.00322092 Jy ! Component: 150 - total flux cleaned = 0.0033909 Jy ! Component: 200 - total flux cleaned = 0.00346885 Jy ! Total flux subtracted in 200 components = 0.00346885 Jy ! Clean residual min=-0.003718 max=0.003974 Jy/beam ! Clean residual mean=-0.000002 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.225792 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.225792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055997Jy sigma=0.000656 ! Fit after self-cal, rms=0.055987Jy sigma=0.000656 ! Inverting map ! Added new window around map position (-82, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189485 Jy ! Component: 100 - total flux cleaned = 0.00208596 Jy ! Component: 150 - total flux cleaned = 0.00232911 Jy ! Component: 200 - total flux cleaned = 0.00247926 Jy ! Total flux subtracted in 200 components = 0.00247926 Jy ! Clean residual min=-0.003486 max=0.003048 Jy/beam ! Clean residual mean=-0.000003 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.228271 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.228271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055619Jy sigma=0.000651 ! Fit after self-cal, rms=0.055604Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055604Jy sigma=0.000651 ! Fit after self-cal, rms=0.055309Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.947 mas, bmaj=8.256 mas, bpa=0.9362 degrees ! Estimated noise=1352.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887532 Jy ! Component: 100 - total flux cleaned = 0.000678458 Jy ! Component: 150 - total flux cleaned = 0.000613353 Jy ! Component: 200 - total flux cleaned = 0.000553336 Jy ! Total flux subtracted in 200 components = 0.000553336 Jy ! Clean residual min=-0.003339 max=0.002980 Jy/beam ! Clean residual mean=-0.000003 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.228824 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 93 components and 0.228824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055122Jy sigma=0.000648 ! Fit after self-cal, rms=0.055115Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398098 Jy ! Component: 100 - total flux cleaned = 0.000284941 Jy ! Component: 150 - total flux cleaned = 0.000284166 Jy ! Component: 200 - total flux cleaned = 0.00028197 Jy ! Total flux subtracted in 200 components = 0.00028197 Jy ! Clean residual min=-0.003259 max=0.002918 Jy/beam ! Clean residual mean=-0.000003 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.229106 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 98 components and 0.229106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054998Jy sigma=0.000647 ! Fit after self-cal, rms=0.054995Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054995Jy sigma=0.000647 ! Fit after self-cal, rms=0.054944Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.051 mas, bmaj=15.32 mas, bpa=2.847 degrees ! Estimated noise=1561.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000733776 Jy ! Component: 100 - total flux cleaned = 0.000767969 Jy ! Component: 150 - total flux cleaned = 0.000833546 Jy ! Component: 200 - total flux cleaned = 0.000864439 Jy ! Total flux subtracted in 200 components = 0.000864439 Jy ! Clean residual min=-0.002774 max=0.003248 Jy/beam ! Clean residual mean=-0.000004 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.229971 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 0.229971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054903Jy sigma=0.000646 ! Fit after self-cal, rms=0.054895Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.60577e-05 Jy ! Component: 100 - total flux cleaned = 0.000198896 Jy ! Component: 150 - total flux cleaned = 0.000173794 Jy ! Component: 200 - total flux cleaned = 0.000173657 Jy ! Total flux subtracted in 200 components = 0.000173657 Jy ! Clean residual min=-0.002726 max=0.003238 Jy/beam ! Clean residual mean=-0.000004 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.230144 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.230144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054869Jy sigma=0.000646 ! Fit after self-cal, rms=0.054864Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=8.258 mas, bpa=0.9868 degrees ! Estimated noise=1352.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.942 x 8.258 at 0.9868 degrees (North through East) ! Clean map min=-0.0040902 max=0.20676 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=6.733 mas, bpa=-5.958 degrees ! Estimated noise=1696.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160098 Jy ! Component: 100 - total flux cleaned = 0.213169 Jy ! Component: 150 - total flux cleaned = 0.227181 Jy ! Component: 200 - total flux cleaned = 0.227176 Jy ! Total flux subtracted in 200 components = 0.227176 Jy ! Clean residual min=-0.008550 max=0.008111 Jy/beam ! Clean residual mean=-0.000000 rms=0.001890 Jy/beam ! Combined flux in latest and established models = 0.227176 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.227176 Jy ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=8.258 mas, bpa=0.9868 degrees ! Estimated noise=1352.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000802851 Jy ! Component: 100 - total flux cleaned = 0.000352555 Jy ! Component: 150 - total flux cleaned = 0.00155776 Jy ! Component: 200 - total flux cleaned = 0.00301738 Jy ! Total flux subtracted in 200 components = 0.00301738 Jy ! Clean residual min=-0.005461 max=0.003945 Jy/beam ! Clean residual mean=-0.000004 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.230193 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.230193 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.051 mas, bmaj=15.32 mas, bpa=2.847 degrees ! Estimated noise=1561.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161764 Jy ! Component: 100 - total flux cleaned = 0.00224752 Jy ! Component: 150 - total flux cleaned = 0.00242389 Jy ! Component: 200 - total flux cleaned = 0.0024214 Jy ! Total flux subtracted in 200 components = 0.0024214 Jy ! Clean residual min=-0.003533 max=0.003419 Jy/beam ! Clean residual mean=-0.000004 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.232615 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201286 Jy ! Component: 100 - total flux cleaned = -0.000263076 Jy ! Component: 150 - total flux cleaned = -0.000206171 Jy ! Component: 200 - total flux cleaned = -0.000264596 Jy ! Total flux subtracted in 200 components = -0.000264596 Jy ! Clean residual min=-0.003292 max=0.003224 Jy/beam ! Clean residual mean=-0.000004 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.23235 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 0.23235 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=8.258 mas, bpa=0.9868 degrees ! Estimated noise=1352.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609065 Jy ! Component: 100 - total flux cleaned = 8.97196e-06 Jy ! Component: 150 - total flux cleaned = 0.000368473 Jy ! Component: 200 - total flux cleaned = 0.000479947 Jy ! Total flux subtracted in 200 components = 0.000479947 Jy ! Clean residual min=-0.003923 max=0.003328 Jy/beam ! Clean residual mean=-0.000003 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.23283 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.23283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055802Jy sigma=0.000653 ! Fit after self-cal, rms=0.055827Jy sigma=0.000652 wmodel J1357-1527_S_2017_04_28_pus_map.mod ! Writing 82 model components to file: J1357-1527_S_2017_04_28_pus_map.mod wobs J1357-1527_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1357-1527_S_2017_04_28_pus_uvs.fits wwins J1357-1527_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J1357-1527_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141536 Jy ! Component: 100 - total flux cleaned = -0.00213924 Jy ! Component: 150 - total flux cleaned = -0.00265484 Jy ! Component: 200 - total flux cleaned = -0.0028731 Jy ! Component: 250 - total flux cleaned = -0.0029776 Jy ! Component: 300 - total flux cleaned = -0.00307937 Jy ! Component: 350 - total flux cleaned = -0.00307967 Jy ! Component: 400 - total flux cleaned = -0.00307873 Jy ! Component: 450 - total flux cleaned = -0.00303233 Jy ! Component: 500 - total flux cleaned = -0.00312294 Jy ! Component: 550 - total flux cleaned = -0.00325502 Jy ! Component: 600 - total flux cleaned = -0.00308384 Jy ! Component: 650 - total flux cleaned = -0.00308449 Jy ! Component: 700 - total flux cleaned = -0.00308472 Jy ! Component: 750 - total flux cleaned = -0.00304428 Jy ! Component: 800 - total flux cleaned = -0.00296654 Jy ! Component: 850 - total flux cleaned = -0.00296728 Jy ! Component: 900 - total flux cleaned = -0.00296697 Jy ! Component: 950 - total flux cleaned = -0.00296706 Jy ! Component: 1000 - total flux cleaned = -0.00296723 Jy ! Component: 1050 - total flux cleaned = -0.00296738 Jy ! Component: 1100 - total flux cleaned = -0.00286436 Jy ! Component: 1150 - total flux cleaned = -0.00283023 Jy ! Component: 1200 - total flux cleaned = -0.00276301 Jy ! Component: 1250 - total flux cleaned = -0.00269715 Jy ! Component: 1300 - total flux cleaned = -0.00263313 Jy ! Component: 1350 - total flux cleaned = -0.0026006 Jy ! Component: 1400 - total flux cleaned = -0.0025065 Jy ! Component: 1450 - total flux cleaned = -0.00238339 Jy ! Component: 1500 - total flux cleaned = -0.00244397 Jy ! Component: 1550 - total flux cleaned = -0.00244471 Jy ! Component: 1600 - total flux cleaned = -0.00250373 Jy ! Component: 1650 - total flux cleaned = -0.00256143 Jy ! Component: 1700 - total flux cleaned = -0.00267564 Jy ! Component: 1750 - total flux cleaned = -0.00264742 Jy ! Component: 1800 - total flux cleaned = -0.00273142 Jy ! Component: 1850 - total flux cleaned = -0.00284154 Jy ! Component: 1900 - total flux cleaned = -0.00289563 Jy ! Component: 1950 - total flux cleaned = -0.00295 Jy ! Component: 2000 - total flux cleaned = -0.00318954 Jy ! Component: 2050 - total flux cleaned = -0.00326819 Jy ! Component: 2100 - total flux cleaned = -0.00339762 Jy ! Component: 2150 - total flux cleaned = -0.00344885 Jy ! Component: 2200 - total flux cleaned = -0.00360113 Jy ! Component: 2250 - total flux cleaned = -0.00372658 Jy ! Component: 2300 - total flux cleaned = -0.00382572 Jy ! Component: 2350 - total flux cleaned = -0.00392389 Jy ! Component: 2400 - total flux cleaned = -0.00399712 Jy ! Component: 2450 - total flux cleaned = -0.00423786 Jy ! Component: 2500 - total flux cleaned = -0.00421383 Jy ! Component: 2550 - total flux cleaned = -0.00437885 Jy ! Component: 2600 - total flux cleaned = -0.00435537 Jy ! Component: 2650 - total flux cleaned = -0.00435549 Jy ! Component: 2700 - total flux cleaned = -0.00449293 Jy ! Component: 2750 - total flux cleaned = -0.00458336 Jy ! Component: 2800 - total flux cleaned = -0.00465035 Jy ! Component: 2850 - total flux cleaned = -0.00460556 Jy ! Component: 2900 - total flux cleaned = -0.00460572 Jy ! Component: 2950 - total flux cleaned = -0.00462771 Jy ! Component: 3000 - total flux cleaned = -0.00473614 Jy ! Component: 3050 - total flux cleaned = -0.00475745 Jy ! Component: 3100 - total flux cleaned = -0.00473621 Jy ! Component: 3150 - total flux cleaned = -0.00477853 Jy ! Component: 3200 - total flux cleaned = -0.00484156 Jy ! Component: 3250 - total flux cleaned = -0.00488334 Jy ! Component: 3300 - total flux cleaned = -0.00490394 Jy ! Component: 3350 - total flux cleaned = -0.00496562 Jy ! Component: 3400 - total flux cleaned = -0.00504711 Jy ! Component: 3450 - total flux cleaned = -0.00508751 Jy ! Component: 3500 - total flux cleaned = -0.00516791 Jy ! Component: 3550 - total flux cleaned = -0.00522772 Jy ! Component: 3600 - total flux cleaned = -0.00534632 Jy ! Component: 3650 - total flux cleaned = -0.00546396 Jy ! Component: 3700 - total flux cleaned = -0.00548349 Jy ! Component: 3750 - total flux cleaned = -0.00554177 Jy ! Component: 3800 - total flux cleaned = -0.00565714 Jy ! Component: 3850 - total flux cleaned = -0.0057524 Jy ! Component: 3900 - total flux cleaned = -0.00573339 Jy ! Component: 3950 - total flux cleaned = -0.00582791 Jy ! Component: 4000 - total flux cleaned = -0.00588426 Jy ! Component: 4050 - total flux cleaned = -0.00599606 Jy ! Total flux subtracted in 4096 components = -0.00599609 Jy ! Clean residual min=-0.001070 max=0.001110 Jy/beam ! Clean residual mean=-0.000002 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.226834 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 332 components and 0.226834 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.942 x 8.258 at 0.9868 degrees (North through East) ! Clean map min=-0.0032964 max=0.20589 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.205886 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000325683 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.474558 0.474558 0.949117 1.89823 3.79647 7.59294 15.1859 30.3717 60.7435 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.205 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.942 x 8.258 at 0.9868 degrees (North through East) ! Clean map min=-0.0032964 max=0.20589 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357-1527_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:34 2019