! Started logfile: J1357-1527_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:43:09 2019 obs J1357-1527_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1357-1527_S_2017_03_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.697222 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357-1527_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.619275Jy sigma=0.004675 ! Fit after self-cal, rms=0.616875Jy sigma=0.004658 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=10.67 mas, bpa=8.849 degrees ! Estimated noise=3785.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294039 Jy ! Component: 100 - total flux cleaned = 0.360737 Jy ! Total flux subtracted in 100 components = 0.360737 Jy ! Clean residual min=-0.014126 max=0.025382 Jy/beam ! Clean residual mean=-0.000139 rms=0.004979 Jy/beam ! Combined flux in latest and established models = 0.360737 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.360737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109636Jy sigma=0.000771 ! Fit after self-cal, rms=0.109569Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=11.84 mas, bpa=9.684 degrees ! Estimated noise=3256.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0388712 Jy ! Component: 100 - total flux cleaned = 0.0573224 Jy ! Component: 150 - total flux cleaned = 0.067687 Jy ! Component: 200 - total flux cleaned = 0.0739748 Jy ! Total flux subtracted in 200 components = 0.0739748 Jy ! Clean residual min=-0.008710 max=0.008159 Jy/beam ! Clean residual mean=0.000023 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 0.434712 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 56 components and 0.434712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095628Jy sigma=0.000666 ! Fit after self-cal, rms=0.095453Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 0.99 KP 1.02 ! LA 0.97 MK 1.00* NL 1.02 OV 1.07 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.06 KP 0.97 ! LA 0.99 MK 1.00* NL 1.04 OV 1.09 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.03 HN 0.96 KP 1.01 ! LA 0.96 MK 1.00* NL 1.03 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.08 HN 0.99 KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 0.83 ! PT 0.98 SC 1.12 ! ! ! Fit before self-cal, rms=0.095453Jy sigma=0.000664 ! Fit after self-cal, rms=0.088645Jy sigma=0.000633 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.959 mas, bmaj=11.9 mas, bpa=9.583 degrees ! Estimated noise=3238.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132532 Jy ! Component: 100 - total flux cleaned = -0.00141057 Jy ! Component: 150 - total flux cleaned = -0.00147963 Jy ! Component: 200 - total flux cleaned = -0.00154266 Jy ! Total flux subtracted in 200 components = -0.00154266 Jy ! Clean residual min=-0.006831 max=0.006129 Jy/beam ! Clean residual mean=0.000030 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.433169 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.433169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088480Jy sigma=0.000632 ! Fit after self-cal, rms=0.088433Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088433Jy sigma=0.000631 ! Fit after self-cal, rms=0.088431Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=11.91 mas, bpa=9.557 degrees ! Estimated noise=3237.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000818618 Jy ! Component: 100 - total flux cleaned = -0.000877849 Jy ! Component: 150 - total flux cleaned = -0.000927025 Jy ! Component: 200 - total flux cleaned = -0.000925257 Jy ! Total flux subtracted in 200 components = -0.000925257 Jy ! Clean residual min=-0.006814 max=0.006130 Jy/beam ! Clean residual mean=0.000029 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.432244 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.432244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088348Jy sigma=0.000631 ! Fit after self-cal, rms=0.088336Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012423 Jy ! Component: 100 - total flux cleaned = -0.00012606 Jy ! Component: 150 - total flux cleaned = -0.000124567 Jy ! Component: 200 - total flux cleaned = -0.000124693 Jy ! Total flux subtracted in 200 components = -0.000124693 Jy ! Clean residual min=-0.006798 max=0.006144 Jy/beam ! Clean residual mean=0.000029 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.432119 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.432119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088293Jy sigma=0.000631 ! Fit after self-cal, rms=0.088285Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088285Jy sigma=0.000631 ! Fit after self-cal, rms=0.088302Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=11.91 mas, bpa=9.53 degrees ! Estimated noise=3237.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508356 Jy ! Component: 100 - total flux cleaned = -0.000586175 Jy ! Component: 150 - total flux cleaned = -0.000618621 Jy ! Component: 200 - total flux cleaned = -0.000675377 Jy ! Total flux subtracted in 200 components = -0.000675377 Jy ! Clean residual min=-0.006767 max=0.006118 Jy/beam ! Clean residual mean=0.000029 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.431444 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.431444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088269Jy sigma=0.000630 ! Fit after self-cal, rms=0.088264Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.08314e-05 Jy ! Component: 100 - total flux cleaned = -4.39421e-05 Jy ! Component: 150 - total flux cleaned = -6.9222e-05 Jy ! Component: 200 - total flux cleaned = -6.98109e-05 Jy ! Total flux subtracted in 200 components = -6.98109e-05 Jy ! Clean residual min=-0.006754 max=0.006128 Jy/beam ! Clean residual mean=0.000029 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.431374 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.431374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088244Jy sigma=0.000630 ! Fit after self-cal, rms=0.088241Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088241Jy sigma=0.000630 ! Fit after self-cal, rms=0.088243Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.447 mas, bmaj=15.61 mas, bpa=-2.821 degrees ! Estimated noise=3836.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456214 Jy ! Component: 100 - total flux cleaned = -0.000669717 Jy ! Component: 150 - total flux cleaned = -0.000874146 Jy ! Component: 200 - total flux cleaned = -0.000971166 Jy ! Total flux subtracted in 200 components = -0.000971166 Jy ! Clean residual min=-0.006322 max=0.005979 Jy/beam ! Clean residual mean=0.000046 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.430403 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 78 components and 0.430403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088249Jy sigma=0.000630 ! Fit after self-cal, rms=0.088233Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.76639e-05 Jy ! Component: 100 - total flux cleaned = -3.27531e-05 Jy ! Component: 150 - total flux cleaned = -0.000121496 Jy ! Component: 200 - total flux cleaned = -0.000183446 Jy ! Total flux subtracted in 200 components = -0.000183446 Jy ! Clean residual min=-0.006232 max=0.005911 Jy/beam ! Clean residual mean=0.000046 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 0.430219 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.430219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088241Jy sigma=0.000630 ! Fit after self-cal, rms=0.088237Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=11.91 mas, bpa=9.503 degrees ! Estimated noise=3237.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.971 x 11.91 at 9.503 degrees (North through East) ! Clean map min=-0.0064807 max=0.38554 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=10.72 mas, bpa=8.673 degrees ! Estimated noise=3772.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.292305 Jy ! Component: 100 - total flux cleaned = 0.359194 Jy ! Component: 150 - total flux cleaned = 0.387697 Jy ! Component: 200 - total flux cleaned = 0.403349 Jy ! Total flux subtracted in 200 components = 0.403349 Jy ! Clean residual min=-0.009026 max=0.009871 Jy/beam ! Clean residual mean=-0.000027 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 0.403349 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.403349 Jy ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=11.91 mas, bpa=9.503 degrees ! Estimated noise=3237.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137315 Jy ! Component: 100 - total flux cleaned = 0.0208346 Jy ! Component: 150 - total flux cleaned = 0.0236897 Jy ! Component: 200 - total flux cleaned = 0.0249913 Jy ! Total flux subtracted in 200 components = 0.0249913 Jy ! Clean residual min=-0.006664 max=0.006051 Jy/beam ! Clean residual mean=0.000024 rms=0.001701 Jy/beam ! Combined flux in latest and established models = 0.428341 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 59 components and 0.428341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.447 mas, bmaj=15.61 mas, bpa=-2.821 degrees ! Estimated noise=3836.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126841 Jy ! Component: 100 - total flux cleaned = 0.00136304 Jy ! Component: 150 - total flux cleaned = 0.00151634 Jy ! Component: 200 - total flux cleaned = 0.00157797 Jy ! Total flux subtracted in 200 components = 0.00157797 Jy ! Clean residual min=-0.006336 max=0.005564 Jy/beam ! Clean residual mean=0.000041 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.429919 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4272e-05 Jy ! Component: 100 - total flux cleaned = 0.000103063 Jy ! Component: 150 - total flux cleaned = 6.35845e-05 Jy ! Component: 200 - total flux cleaned = 2.74831e-05 Jy ! Total flux subtracted in 200 components = 2.74831e-05 Jy ! Clean residual min=-0.006106 max=0.005522 Jy/beam ! Clean residual mean=0.000041 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.429946 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 93 components and 0.429946 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=11.91 mas, bpa=9.503 degrees ! Estimated noise=3237.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104051 Jy ! Component: 100 - total flux cleaned = 0.000173468 Jy ! Component: 150 - total flux cleaned = 0.000294751 Jy ! Component: 200 - total flux cleaned = 0.000407851 Jy ! Total flux subtracted in 200 components = 0.000407851 Jy ! Clean residual min=-0.006328 max=0.006096 Jy/beam ! Clean residual mean=0.000026 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.430354 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.430354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088046Jy sigma=0.000629 ! Fit after self-cal, rms=0.088020Jy sigma=0.000629 wmodel J1357-1527_S_2017_03_27_pus_map.mod ! Writing 113 model components to file: J1357-1527_S_2017_03_27_pus_map.mod wobs J1357-1527_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1357-1527_S_2017_03_27_pus_uvs.fits wwins J1357-1527_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J1357-1527_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148133 Jy ! Component: 100 - total flux cleaned = -0.00281344 Jy ! Component: 150 - total flux cleaned = -0.003852 Jy ! Component: 200 - total flux cleaned = -0.00402751 Jy ! Component: 250 - total flux cleaned = -0.00452966 Jy ! Component: 300 - total flux cleaned = -0.00484933 Jy ! Component: 350 - total flux cleaned = -0.00515596 Jy ! Component: 400 - total flux cleaned = -0.00552333 Jy ! Component: 450 - total flux cleaned = -0.00587285 Jy ! Component: 500 - total flux cleaned = -0.00587242 Jy ! Component: 550 - total flux cleaned = -0.00593917 Jy ! Component: 600 - total flux cleaned = -0.00600471 Jy ! Component: 650 - total flux cleaned = -0.00594376 Jy ! Component: 700 - total flux cleaned = -0.00582472 Jy ! Component: 750 - total flux cleaned = -0.0057671 Jy ! Component: 800 - total flux cleaned = -0.00570949 Jy ! Component: 850 - total flux cleaned = -0.00565252 Jy ! Component: 900 - total flux cleaned = -0.0055981 Jy ! Component: 950 - total flux cleaned = -0.00554518 Jy ! Component: 1000 - total flux cleaned = -0.00549235 Jy ! Component: 1050 - total flux cleaned = -0.00534059 Jy ! Component: 1100 - total flux cleaned = -0.0052915 Jy ! Component: 1150 - total flux cleaned = -0.00519393 Jy ! Component: 1200 - total flux cleaned = -0.00509866 Jy ! Component: 1250 - total flux cleaned = -0.00477367 Jy ! Component: 1300 - total flux cleaned = -0.00482004 Jy ! Component: 1350 - total flux cleaned = -0.00468516 Jy ! Component: 1400 - total flux cleaned = -0.00459697 Jy ! Component: 1450 - total flux cleaned = -0.00468359 Jy ! Component: 1500 - total flux cleaned = -0.00459782 Jy ! Component: 1550 - total flux cleaned = -0.00459783 Jy ! Component: 1600 - total flux cleaned = -0.00455665 Jy ! Component: 1650 - total flux cleaned = -0.00459728 Jy ! Component: 1700 - total flux cleaned = -0.00459725 Jy ! Component: 1750 - total flux cleaned = -0.00459703 Jy ! Component: 1800 - total flux cleaned = -0.00467402 Jy ! Component: 1850 - total flux cleaned = -0.00455835 Jy ! Component: 1900 - total flux cleaned = -0.00455809 Jy ! Component: 1950 - total flux cleaned = -0.00459522 Jy ! Component: 2000 - total flux cleaned = -0.00444699 Jy ! Component: 2050 - total flux cleaned = -0.00444695 Jy ! Component: 2100 - total flux cleaned = -0.00437465 Jy ! Component: 2150 - total flux cleaned = -0.00430303 Jy ! Component: 2200 - total flux cleaned = -0.00419651 Jy ! Component: 2250 - total flux cleaned = -0.00398633 Jy ! Component: 2300 - total flux cleaned = -0.00391743 Jy ! Component: 2350 - total flux cleaned = -0.00384917 Jy ! Component: 2400 - total flux cleaned = -0.0037813 Jy ! Component: 2450 - total flux cleaned = -0.00368044 Jy ! Component: 2500 - total flux cleaned = -0.00354742 Jy ! Component: 2550 - total flux cleaned = -0.00351445 Jy ! Component: 2600 - total flux cleaned = -0.00335125 Jy ! Component: 2650 - total flux cleaned = -0.00331885 Jy ! Component: 2700 - total flux cleaned = -0.0031904 Jy ! Component: 2750 - total flux cleaned = -0.00309511 Jy ! Component: 2800 - total flux cleaned = -0.00296884 Jy ! Component: 2850 - total flux cleaned = -0.00284354 Jy ! Component: 2900 - total flux cleaned = -0.00262628 Jy ! Component: 2950 - total flux cleaned = -0.00250289 Jy ! Component: 3000 - total flux cleaned = -0.00238006 Jy ! Component: 3050 - total flux cleaned = -0.00225802 Jy ! Component: 3100 - total flux cleaned = -0.00204572 Jy ! Component: 3150 - total flux cleaned = -0.00189486 Jy ! Component: 3200 - total flux cleaned = -0.00177454 Jy ! Component: 3250 - total flux cleaned = -0.00162489 Jy ! Component: 3300 - total flux cleaned = -0.00144647 Jy ! Component: 3350 - total flux cleaned = -0.00138757 Jy ! Component: 3400 - total flux cleaned = -0.00124001 Jy ! Component: 3450 - total flux cleaned = -0.00115203 Jy ! Component: 3500 - total flux cleaned = -0.00109345 Jy ! Component: 3550 - total flux cleaned = -0.00100595 Jy ! Component: 3600 - total flux cleaned = -0.000889888 Jy ! Component: 3650 - total flux cleaned = -0.000745368 Jy ! Component: 3700 - total flux cleaned = -0.000658881 Jy ! Component: 3750 - total flux cleaned = -0.000601495 Jy ! Component: 3800 - total flux cleaned = -0.000458353 Jy ! Component: 3850 - total flux cleaned = -0.000372659 Jy ! Component: 3900 - total flux cleaned = -0.000258968 Jy ! Component: 3950 - total flux cleaned = -0.000173735 Jy ! Component: 4000 - total flux cleaned = -8.88569e-05 Jy ! Component: 4050 - total flux cleaned = -3.23522e-05 Jy ! Total flux subtracted in 4096 components = 2.39885e-05 Jy ! Clean residual min=-0.001805 max=0.001529 Jy/beam ! Clean residual mean=0.000005 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.430378 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 344 components and 0.430378 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.971 x 11.91 at 9.503 degrees (North through East) ! Clean map min=-0.0038382 max=0.38462 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.384619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000504475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.393487 0.393487 0.786974 1.57395 3.1479 6.29579 12.5916 25.1832 50.3663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.384 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.971 x 11.91 at 9.503 degrees (North through East) ! Clean map min=-0.0038382 max=0.38462 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357-1527_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:43:13 2019