! Started logfile: J1357-1527_S_2017_02_24_pus_uvs.log on Sat May 4 11:28:43 2019 obs J1357-1527_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1357-1527_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.891667 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 1284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357-1527_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.639930Jy sigma=0.004812 ! Fit after self-cal, rms=0.635977Jy sigma=0.004786 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.845 mas, bpa=0.8524 degrees ! Estimated noise=3579.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.281767 Jy ! Component: 100 - total flux cleaned = 0.351002 Jy ! Total flux subtracted in 100 components = 0.351002 Jy ! Clean residual min=-0.014881 max=0.028596 Jy/beam ! Clean residual mean=-0.000057 rms=0.004748 Jy/beam ! Combined flux in latest and established models = 0.351002 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.351002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108951Jy sigma=0.000791 ! Fit after self-cal, rms=0.108948Jy sigma=0.000791 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.058 mas, bpa=2.354 degrees ! Estimated noise=2848.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351598 Jy ! Component: 100 - total flux cleaned = 0.052255 Jy ! Component: 150 - total flux cleaned = 0.0622804 Jy ! Component: 200 - total flux cleaned = 0.0678037 Jy ! Total flux subtracted in 200 components = 0.0678037 Jy ! Clean residual min=-0.009859 max=0.013408 Jy/beam ! Clean residual mean=-0.000029 rms=0.002792 Jy/beam ! Combined flux in latest and established models = 0.418806 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 60 components and 0.418806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098191Jy sigma=0.000701 ! Fit after self-cal, rms=0.097886Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.15 KP 0.99 ! LA 0.96 MK 0.99 NL 0.94 OV 1.04 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 1.16 KP 0.92 ! LA 0.95 MK 0.99 NL 1.00 OV 1.09 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.03 KP 1.08 ! LA 1.00 MK 0.95 NL 1.15 OV 0.92 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.01 KP 1.00* ! LA 0.86 MK 1.03 NL 1.00* OV 1.02 ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.097886Jy sigma=0.000699 ! Fit after self-cal, rms=0.093182Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.055 mas, bpa=2.355 degrees ! Estimated noise=2836.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000856234 Jy ! Component: 100 - total flux cleaned = -0.00130012 Jy ! Component: 150 - total flux cleaned = -0.00166735 Jy ! Component: 200 - total flux cleaned = -0.00182862 Jy ! Total flux subtracted in 200 components = -0.00182862 Jy ! Clean residual min=-0.008059 max=0.006955 Jy/beam ! Clean residual mean=0.000001 rms=0.001890 Jy/beam ! Combined flux in latest and established models = 0.416977 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.416977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092934Jy sigma=0.000660 ! Fit after self-cal, rms=0.092960Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092960Jy sigma=0.000660 ! Fit after self-cal, rms=0.092857Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=8.046 mas, bpa=2.311 degrees ! Estimated noise=2831.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155784 Jy ! Component: 100 - total flux cleaned = -0.00029818 Jy ! Component: 150 - total flux cleaned = -0.000552196 Jy ! Component: 200 - total flux cleaned = -0.000728561 Jy ! Total flux subtracted in 200 components = -0.000728561 Jy ! Clean residual min=-0.007991 max=0.006771 Jy/beam ! Clean residual mean=0.000001 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.416249 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.416249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092744Jy sigma=0.000659 ! Fit after self-cal, rms=0.092744Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.12067e-05 Jy ! Component: 100 - total flux cleaned = -0.000169242 Jy ! Component: 150 - total flux cleaned = -0.000321274 Jy ! Component: 200 - total flux cleaned = -0.000463801 Jy ! Total flux subtracted in 200 components = -0.000463801 Jy ! Clean residual min=-0.007970 max=0.006783 Jy/beam ! Clean residual mean=0.000001 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.415785 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.415785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092682Jy sigma=0.000659 ! Fit after self-cal, rms=0.092685Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092685Jy sigma=0.000659 ! Fit after self-cal, rms=0.092588Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.039 mas, bpa=2.305 degrees ! Estimated noise=2826.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544023 Jy ! Component: 100 - total flux cleaned = -0.000597014 Jy ! Component: 150 - total flux cleaned = -0.000732787 Jy ! Component: 200 - total flux cleaned = -0.000775097 Jy ! Total flux subtracted in 200 components = -0.000775097 Jy ! Clean residual min=-0.007851 max=0.006803 Jy/beam ! Clean residual mean=0.000002 rms=0.001824 Jy/beam ! Combined flux in latest and established models = 0.41501 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.41501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092530Jy sigma=0.000658 ! Fit after self-cal, rms=0.092534Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.90334e-05 Jy ! Component: 100 - total flux cleaned = -0.000130817 Jy ! Component: 150 - total flux cleaned = -0.000169658 Jy ! Component: 200 - total flux cleaned = -0.000169036 Jy ! Total flux subtracted in 200 components = -0.000169036 Jy ! Clean residual min=-0.007825 max=0.006832 Jy/beam ! Clean residual mean=0.000001 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 0.414841 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 0.414841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092498Jy sigma=0.000658 ! Fit after self-cal, rms=0.092503Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092503Jy sigma=0.000658 ! Fit after self-cal, rms=0.092441Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.68 mas, bmaj=17.17 mas, bpa=13.34 degrees ! Estimated noise=3444.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110136 Jy ! Component: 100 - total flux cleaned = -2.87191e-05 Jy ! Component: 150 - total flux cleaned = 8.31242e-05 Jy ! Component: 200 - total flux cleaned = 0.000189857 Jy ! Total flux subtracted in 200 components = 0.000189857 Jy ! Clean residual min=-0.006861 max=0.007189 Jy/beam ! Clean residual mean=0.000007 rms=0.002055 Jy/beam ! Combined flux in latest and established models = 0.415031 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 109 components and 0.415031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092430Jy sigma=0.000658 ! Fit after self-cal, rms=0.092436Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175708 Jy ! Component: 100 - total flux cleaned = -6.88353e-05 Jy ! Component: 150 - total flux cleaned = 3.4498e-05 Jy ! Component: 200 - total flux cleaned = 0.000133801 Jy ! Total flux subtracted in 200 components = 0.000133801 Jy ! Clean residual min=-0.006794 max=0.007240 Jy/beam ! Clean residual mean=0.000007 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 0.415165 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 114 components and 0.415165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092428Jy sigma=0.000658 ! Fit after self-cal, rms=0.092433Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.033 mas, bpa=2.313 degrees ! Estimated noise=2822.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 8.033 at 2.313 degrees (North through East) ! Clean map min=-0.0073744 max=0.35343 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=6.826 mas, bpa=0.9504 degrees ! Estimated noise=3551.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.279263 Jy ! Component: 100 - total flux cleaned = 0.348798 Jy ! Component: 150 - total flux cleaned = 0.37622 Jy ! Component: 200 - total flux cleaned = 0.389622 Jy ! Total flux subtracted in 200 components = 0.389622 Jy ! Clean residual min=-0.010199 max=0.009354 Jy/beam ! Clean residual mean=-0.000016 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 0.389622 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.389622 Jy ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.033 mas, bpa=2.313 degrees ! Estimated noise=2822.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116198 Jy ! Component: 100 - total flux cleaned = 0.0184996 Jy ! Component: 150 - total flux cleaned = 0.0201701 Jy ! Component: 200 - total flux cleaned = 0.021172 Jy ! Total flux subtracted in 200 components = 0.021172 Jy ! Clean residual min=-0.008033 max=0.006437 Jy/beam ! Clean residual mean=-0.000004 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.410794 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 61 components and 0.410794 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.68 mas, bmaj=17.17 mas, bpa=13.34 degrees ! Estimated noise=3444.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232577 Jy ! Component: 100 - total flux cleaned = 0.00298258 Jy ! Component: 150 - total flux cleaned = 0.00331302 Jy ! Component: 200 - total flux cleaned = 0.00346374 Jy ! Total flux subtracted in 200 components = 0.00346374 Jy ! Clean residual min=-0.005923 max=0.007052 Jy/beam ! Clean residual mean=0.000004 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.414258 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211905 Jy ! Component: 100 - total flux cleaned = 0.000342761 Jy ! Component: 150 - total flux cleaned = 0.00052543 Jy ! Component: 200 - total flux cleaned = 0.000637568 Jy ! Total flux subtracted in 200 components = 0.000637568 Jy ! Clean residual min=-0.005598 max=0.007060 Jy/beam ! Clean residual mean=0.000006 rms=0.001926 Jy/beam ! Combined flux in latest and established models = 0.414895 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 105 components and 0.414895 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.033 mas, bpa=2.313 degrees ! Estimated noise=2822.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000560556 Jy ! Component: 100 - total flux cleaned = -0.000918002 Jy ! Component: 150 - total flux cleaned = -0.0008381 Jy ! Component: 200 - total flux cleaned = -0.000764537 Jy ! Total flux subtracted in 200 components = -0.000764537 Jy ! Clean residual min=-0.007696 max=0.006762 Jy/beam ! Clean residual mean=0.000001 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.414131 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 0.414131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092122Jy sigma=0.000656 ! Fit after self-cal, rms=0.092093Jy sigma=0.000656 wmodel J1357-1527_S_2017_02_24_pus_map.mod ! Writing 128 model components to file: J1357-1527_S_2017_02_24_pus_map.mod wobs J1357-1527_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1357-1527_S_2017_02_24_pus_uvs.fits wwins J1357-1527_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J1357-1527_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000742839 Jy ! Component: 100 - total flux cleaned = -0.00164364 Jy ! Component: 150 - total flux cleaned = -0.00269024 Jy ! Component: 200 - total flux cleaned = -0.0035757 Jy ! Component: 250 - total flux cleaned = -0.00432117 Jy ! Component: 300 - total flux cleaned = -0.00494147 Jy ! Component: 350 - total flux cleaned = -0.00554165 Jy ! Component: 400 - total flux cleaned = -0.0058711 Jy ! Component: 450 - total flux cleaned = -0.00611212 Jy ! Component: 500 - total flux cleaned = -0.00665337 Jy ! Component: 550 - total flux cleaned = -0.00680149 Jy ! Component: 600 - total flux cleaned = -0.00702186 Jy ! Component: 650 - total flux cleaned = -0.00730514 Jy ! Component: 700 - total flux cleaned = -0.00730568 Jy ! Component: 750 - total flux cleaned = -0.00757555 Jy ! Component: 800 - total flux cleaned = -0.00770554 Jy ! Component: 850 - total flux cleaned = -0.00783452 Jy ! Component: 900 - total flux cleaned = -0.00808497 Jy ! Component: 950 - total flux cleaned = -0.00826883 Jy ! Component: 1000 - total flux cleaned = -0.00862813 Jy ! Component: 1050 - total flux cleaned = -0.00892271 Jy ! Component: 1100 - total flux cleaned = -0.00921064 Jy ! Component: 1150 - total flux cleaned = -0.00932354 Jy ! Component: 1200 - total flux cleaned = -0.00948973 Jy ! Component: 1250 - total flux cleaned = -0.00970638 Jy ! Component: 1300 - total flux cleaned = -0.00970618 Jy ! Component: 1350 - total flux cleaned = -0.00996698 Jy ! Component: 1400 - total flux cleaned = -0.0101202 Jy ! Component: 1450 - total flux cleaned = -0.0102201 Jy ! Component: 1500 - total flux cleaned = -0.0104179 Jy ! Component: 1550 - total flux cleaned = -0.0105646 Jy ! Component: 1600 - total flux cleaned = -0.0106611 Jy ! Component: 1650 - total flux cleaned = -0.0109921 Jy ! Component: 1700 - total flux cleaned = -0.01113 Jy ! Component: 1750 - total flux cleaned = -0.0111751 Jy ! Component: 1800 - total flux cleaned = -0.0112642 Jy ! Component: 1850 - total flux cleaned = -0.0113538 Jy ! Component: 1900 - total flux cleaned = -0.0114413 Jy ! Component: 1950 - total flux cleaned = -0.0114843 Jy ! Component: 2000 - total flux cleaned = -0.0115271 Jy ! Component: 2050 - total flux cleaned = -0.0114856 Jy ! Component: 2100 - total flux cleaned = -0.0116929 Jy ! Component: 2150 - total flux cleaned = -0.0118967 Jy ! Component: 2200 - total flux cleaned = -0.0118568 Jy ! Component: 2250 - total flux cleaned = -0.0120559 Jy ! Component: 2300 - total flux cleaned = -0.0120556 Jy ! Component: 2350 - total flux cleaned = -0.0122112 Jy ! Component: 2400 - total flux cleaned = -0.012326 Jy ! Component: 2450 - total flux cleaned = -0.0123636 Jy ! Component: 2500 - total flux cleaned = -0.0124758 Jy ! Component: 2550 - total flux cleaned = -0.012587 Jy ! Component: 2600 - total flux cleaned = -0.012734 Jy ! Component: 2650 - total flux cleaned = -0.0129158 Jy ! Component: 2700 - total flux cleaned = -0.0129877 Jy ! Component: 2750 - total flux cleaned = -0.0132374 Jy ! Component: 2800 - total flux cleaned = -0.0133078 Jy ! Component: 2850 - total flux cleaned = -0.0134483 Jy ! Component: 2900 - total flux cleaned = -0.0135524 Jy ! Component: 2950 - total flux cleaned = -0.0136555 Jy ! Component: 3000 - total flux cleaned = -0.0136898 Jy ! Component: 3050 - total flux cleaned = -0.0137239 Jy ! Component: 3100 - total flux cleaned = -0.0137912 Jy ! Component: 3150 - total flux cleaned = -0.013891 Jy ! Component: 3200 - total flux cleaned = -0.0138912 Jy ! Component: 3250 - total flux cleaned = -0.0139573 Jy ! Component: 3300 - total flux cleaned = -0.0139901 Jy ! Component: 3350 - total flux cleaned = -0.0140551 Jy ! Component: 3400 - total flux cleaned = -0.0140552 Jy ! Component: 3450 - total flux cleaned = -0.0141504 Jy ! Component: 3500 - total flux cleaned = -0.0141185 Jy ! Component: 3550 - total flux cleaned = -0.0140871 Jy ! Component: 3600 - total flux cleaned = -0.0141809 Jy ! Component: 3650 - total flux cleaned = -0.0141498 Jy ! Component: 3700 - total flux cleaned = -0.0142734 Jy ! Component: 3750 - total flux cleaned = -0.0143039 Jy ! Component: 3800 - total flux cleaned = -0.0142735 Jy ! Component: 3850 - total flux cleaned = -0.0143949 Jy ! Component: 3900 - total flux cleaned = -0.014395 Jy ! Component: 3950 - total flux cleaned = -0.0143052 Jy ! Component: 4000 - total flux cleaned = -0.0142758 Jy ! Component: 4050 - total flux cleaned = -0.0142759 Jy ! Total flux subtracted in 4096 components = -0.0142758 Jy ! Clean residual min=-0.002100 max=0.001471 Jy/beam ! Clean residual mean=0.000001 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.399855 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 379 components and 0.399855 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 8.033 at 2.313 degrees (North through East) ! Clean map min=-0.0048276 max=0.35247 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.352468 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000502246 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.427482 0.427482 0.854964 1.70993 3.41986 6.83972 13.6794 27.3589 54.7177 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.352 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 8.033 at 2.313 degrees (North through East) ! Clean map min=-0.0048276 max=0.35247 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357-1527_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:28:47 2019