! Started logfile: J1357-1527_S_2017_02_19_pus_uvs.log on Sat May 4 18:52:30 2019 obs J1357-1527_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1357-1527_S_2017_02_19_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.602778 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1736 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357-1527_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.634815Jy sigma=0.004852 ! Fit after self-cal, rms=0.631591Jy sigma=0.004829 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.72 mas, bmaj=7.528 mas, bpa=1.787 degrees ! Estimated noise=2970.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278943 Jy ! Component: 100 - total flux cleaned = 0.347272 Jy ! Total flux subtracted in 100 components = 0.347272 Jy ! Clean residual min=-0.019170 max=0.026295 Jy/beam ! Clean residual mean=0.000007 rms=0.005054 Jy/beam ! Combined flux in latest and established models = 0.347272 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.347272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129942Jy sigma=0.000868 ! Fit after self-cal, rms=0.129879Jy sigma=0.000867 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=8.311 mas, bpa=4.795 degrees ! Estimated noise=2503.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360431 Jy ! Component: 100 - total flux cleaned = 0.0524826 Jy ! Component: 150 - total flux cleaned = 0.0621484 Jy ! Component: 200 - total flux cleaned = 0.0683148 Jy ! Total flux subtracted in 200 components = 0.0683148 Jy ! Clean residual min=-0.013920 max=0.016526 Jy/beam ! Clean residual mean=-0.000008 rms=0.003893 Jy/beam ! Combined flux in latest and established models = 0.415587 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 44 components and 0.415587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117616Jy sigma=0.000805 ! Fit after self-cal, rms=0.117520Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.07 KP 1.02 ! LA 1.01 MK 0.95 NL 0.89 OV 1.02 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.09 KP 0.98 ! LA 0.98 MK 0.94 NL 1.07 OV 1.07 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 1.10 KP 0.88 ! LA 0.75 MK 0.96 NL 1.22 OV 0.98 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 1.05 KP 1.00* ! LA 0.66 MK 0.96 NL 1.00* OV 1.75 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.117520Jy sigma=0.000804 ! Fit after self-cal, rms=0.100748Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=8.295 mas, bpa=4.689 degrees ! Estimated noise=2489.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423106 Jy ! Component: 100 - total flux cleaned = 0.000508718 Jy ! Component: 150 - total flux cleaned = 0.000506007 Jy ! Component: 200 - total flux cleaned = 0.0005697 Jy ! Total flux subtracted in 200 components = 0.0005697 Jy ! Clean residual min=-0.008120 max=0.009605 Jy/beam ! Clean residual mean=-0.000003 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.416157 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.416157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100595Jy sigma=0.000681 ! Fit after self-cal, rms=0.100657Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100657Jy sigma=0.000680 ! Fit after self-cal, rms=0.094365Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=8.286 mas, bpa=4.613 degrees ! Estimated noise=2489.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730186 Jy ! Component: 100 - total flux cleaned = 0.00086225 Jy ! Component: 150 - total flux cleaned = 0.000748006 Jy ! Component: 200 - total flux cleaned = 0.000697155 Jy ! Total flux subtracted in 200 components = 0.000697155 Jy ! Clean residual min=-0.006507 max=0.007573 Jy/beam ! Clean residual mean=-0.000005 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.416854 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.416854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094273Jy sigma=0.000661 ! Fit after self-cal, rms=0.094336Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (102, 97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603645 Jy ! Component: 100 - total flux cleaned = 0.00654605 Jy ! Component: 150 - total flux cleaned = 0.00681766 Jy ! Component: 200 - total flux cleaned = 0.00692994 Jy ! Total flux subtracted in 200 components = 0.00692994 Jy ! Clean residual min=-0.006701 max=0.006561 Jy/beam ! Clean residual mean=-0.000000 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.423784 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.423784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093687Jy sigma=0.000656 ! Fit after self-cal, rms=0.093680Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093680Jy sigma=0.000656 ! Fit after self-cal, rms=0.093558Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=8.276 mas, bpa=4.459 degrees ! Estimated noise=2486.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215792 Jy ! Component: 100 - total flux cleaned = 0.00254993 Jy ! Component: 150 - total flux cleaned = 0.00280859 Jy ! Component: 200 - total flux cleaned = 0.00303924 Jy ! Total flux subtracted in 200 components = 0.00303924 Jy ! Clean residual min=-0.006162 max=0.006567 Jy/beam ! Clean residual mean=-0.000000 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.426823 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.426823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093365Jy sigma=0.000655 ! Fit after self-cal, rms=0.093370Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695663 Jy ! Component: 100 - total flux cleaned = 0.000695045 Jy ! Component: 150 - total flux cleaned = 0.000754957 Jy ! Component: 200 - total flux cleaned = 0.000753255 Jy ! Total flux subtracted in 200 components = 0.000753255 Jy ! Clean residual min=-0.006013 max=0.006452 Jy/beam ! Clean residual mean=0.000000 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.427576 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 87 components and 0.427576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093286Jy sigma=0.000654 ! Fit after self-cal, rms=0.093288Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093288Jy sigma=0.000654 ! Fit after self-cal, rms=0.093381Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.289 mas, bmaj=14.38 mas, bpa=7.468 degrees ! Estimated noise=3211.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243114 Jy ! Component: 100 - total flux cleaned = 0.00222444 Jy ! Component: 150 - total flux cleaned = 0.00205638 Jy ! Component: 200 - total flux cleaned = 0.00185192 Jy ! Total flux subtracted in 200 components = 0.00185192 Jy ! Clean residual min=-0.006709 max=0.007988 Jy/beam ! Clean residual mean=-0.000000 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 0.429428 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.429428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093389Jy sigma=0.000654 ! Fit after self-cal, rms=0.093350Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127064 Jy ! Component: 100 - total flux cleaned = 6.44359e-05 Jy ! Component: 150 - total flux cleaned = -0.00013619 Jy ! Component: 200 - total flux cleaned = -0.000320489 Jy ! Total flux subtracted in 200 components = -0.000320489 Jy ! Clean residual min=-0.006573 max=0.007938 Jy/beam ! Clean residual mean=-0.000000 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.429108 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.429108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093367Jy sigma=0.000654 ! Fit after self-cal, rms=0.093345Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=8.271 mas, bpa=4.408 degrees ! Estimated noise=2488.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 8.271 at 4.408 degrees (North through East) ! Clean map min=-0.0055431 max=0.36027 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=7.518 mas, bpa=1.369 degrees ! Estimated noise=2961.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.27779 Jy ! Component: 100 - total flux cleaned = 0.350786 Jy ! Component: 150 - total flux cleaned = 0.379721 Jy ! Component: 200 - total flux cleaned = 0.392952 Jy ! Total flux subtracted in 200 components = 0.392952 Jy ! Clean residual min=-0.010514 max=0.010642 Jy/beam ! Clean residual mean=-0.000001 rms=0.002175 Jy/beam ! Combined flux in latest and established models = 0.392952 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.392952 Jy ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=8.271 mas, bpa=4.408 degrees ! Estimated noise=2488.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126668 Jy ! Component: 100 - total flux cleaned = 0.0205071 Jy ! Component: 150 - total flux cleaned = 0.025617 Jy ! Component: 200 - total flux cleaned = 0.0278929 Jy ! Total flux subtracted in 200 components = 0.0278929 Jy ! Clean residual min=-0.007273 max=0.006720 Jy/beam ! Clean residual mean=-0.000001 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 0.420845 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 69 components and 0.420845 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.289 mas, bmaj=14.38 mas, bpa=7.468 degrees ! Estimated noise=3211.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425458 Jy ! Component: 100 - total flux cleaned = 0.00508152 Jy ! Component: 150 - total flux cleaned = 0.00571894 Jy ! Component: 200 - total flux cleaned = 0.00588537 Jy ! Total flux subtracted in 200 components = 0.00588537 Jy ! Clean residual min=-0.006758 max=0.007828 Jy/beam ! Clean residual mean=-0.000002 rms=0.001973 Jy/beam ! Combined flux in latest and established models = 0.426731 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146295 Jy ! Component: 100 - total flux cleaned = 0.000212634 Jy ! Component: 150 - total flux cleaned = 0.000338765 Jy ! Component: 200 - total flux cleaned = 0.000396855 Jy ! Total flux subtracted in 200 components = 0.000396855 Jy ! Clean residual min=-0.006687 max=0.007678 Jy/beam ! Clean residual mean=-0.000002 rms=0.001944 Jy/beam ! Combined flux in latest and established models = 0.427128 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 109 components and 0.427128 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=8.271 mas, bpa=4.408 degrees ! Estimated noise=2488.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712183 Jy ! Component: 100 - total flux cleaned = 0.00118761 Jy ! Component: 150 - total flux cleaned = 0.00129323 Jy ! Component: 200 - total flux cleaned = 0.00157947 Jy ! Total flux subtracted in 200 components = 0.00157947 Jy ! Clean residual min=-0.005893 max=0.006533 Jy/beam ! Clean residual mean=-0.000001 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.428707 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.428707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093227Jy sigma=0.000652 ! Fit after self-cal, rms=0.093125Jy sigma=0.000652 wmodel J1357-1527_S_2017_02_19_pus_map.mod ! Writing 125 model components to file: J1357-1527_S_2017_02_19_pus_map.mod wobs J1357-1527_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1357-1527_S_2017_02_19_pus_uvs.fits wwins J1357-1527_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J1357-1527_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092589 Jy ! Component: 100 - total flux cleaned = 0.00112511 Jy ! Component: 150 - total flux cleaned = 0.000583802 Jy ! Component: 200 - total flux cleaned = 0.00024834 Jy ! Component: 250 - total flux cleaned = -0.000315648 Jy ! Component: 300 - total flux cleaned = -0.000854585 Jy ! Component: 350 - total flux cleaned = -0.001373 Jy ! Component: 400 - total flux cleaned = -0.0019446 Jy ! Component: 450 - total flux cleaned = -0.00242844 Jy ! Component: 500 - total flux cleaned = -0.00283281 Jy ! Component: 550 - total flux cleaned = -0.0030295 Jy ! Component: 600 - total flux cleaned = -0.00334696 Jy ! Component: 650 - total flux cleaned = -0.00340904 Jy ! Component: 700 - total flux cleaned = -0.00377227 Jy ! Component: 750 - total flux cleaned = -0.00412698 Jy ! Component: 800 - total flux cleaned = -0.00453279 Jy ! Component: 850 - total flux cleaned = -0.00470148 Jy ! Component: 900 - total flux cleaned = -0.00464609 Jy ! Component: 950 - total flux cleaned = -0.00475641 Jy ! Component: 1000 - total flux cleaned = -0.0049171 Jy ! Component: 1050 - total flux cleaned = -0.0049169 Jy ! Component: 1100 - total flux cleaned = -0.00476225 Jy ! Component: 1150 - total flux cleaned = -0.00471201 Jy ! Component: 1200 - total flux cleaned = -0.00481284 Jy ! Component: 1250 - total flux cleaned = -0.004764 Jy ! Component: 1300 - total flux cleaned = -0.00481279 Jy ! Component: 1350 - total flux cleaned = -0.0049087 Jy ! Component: 1400 - total flux cleaned = -0.00500256 Jy ! Component: 1450 - total flux cleaned = -0.00500256 Jy ! Component: 1500 - total flux cleaned = -0.00491003 Jy ! Component: 1550 - total flux cleaned = -0.00486407 Jy ! Component: 1600 - total flux cleaned = -0.00468439 Jy ! Component: 1650 - total flux cleaned = -0.00455176 Jy ! Component: 1700 - total flux cleaned = -0.0044207 Jy ! Component: 1750 - total flux cleaned = -0.00433445 Jy ! Component: 1800 - total flux cleaned = -0.00429262 Jy ! Component: 1850 - total flux cleaned = -0.00441844 Jy ! Component: 1900 - total flux cleaned = -0.00412788 Jy ! Component: 1950 - total flux cleaned = -0.0042109 Jy ! Component: 2000 - total flux cleaned = -0.00421146 Jy ! Component: 2050 - total flux cleaned = -0.00413178 Jy ! Component: 2100 - total flux cleaned = -0.00421111 Jy ! Component: 2150 - total flux cleaned = -0.0042497 Jy ! Component: 2200 - total flux cleaned = -0.00417309 Jy ! Component: 2250 - total flux cleaned = -0.00421105 Jy ! Component: 2300 - total flux cleaned = -0.00413552 Jy ! Component: 2350 - total flux cleaned = -0.00406077 Jy ! Component: 2400 - total flux cleaned = -0.00406087 Jy ! Component: 2450 - total flux cleaned = -0.00398734 Jy ! Component: 2500 - total flux cleaned = -0.00395095 Jy ! Component: 2550 - total flux cleaned = -0.00373732 Jy ! Component: 2600 - total flux cleaned = -0.00373747 Jy ! Component: 2650 - total flux cleaned = -0.00380662 Jy ! Component: 2700 - total flux cleaned = -0.00370311 Jy ! Component: 2750 - total flux cleaned = -0.00366935 Jy ! Component: 2800 - total flux cleaned = -0.00373678 Jy ! Component: 2850 - total flux cleaned = -0.00370271 Jy ! Component: 2900 - total flux cleaned = -0.00373601 Jy ! Component: 2950 - total flux cleaned = -0.00386748 Jy ! Component: 3000 - total flux cleaned = -0.00370475 Jy ! Component: 3050 - total flux cleaned = -0.00383426 Jy ! Component: 3100 - total flux cleaned = -0.00380194 Jy ! Component: 3150 - total flux cleaned = -0.00380191 Jy ! Component: 3200 - total flux cleaned = -0.00386468 Jy ! Component: 3250 - total flux cleaned = -0.00389552 Jy ! Component: 3300 - total flux cleaned = -0.00398802 Jy ! Component: 3350 - total flux cleaned = -0.00392638 Jy ! Component: 3400 - total flux cleaned = -0.00392692 Jy ! Component: 3450 - total flux cleaned = -0.00389677 Jy ! Component: 3500 - total flux cleaned = -0.00386691 Jy ! Component: 3550 - total flux cleaned = -0.00389683 Jy ! Component: 3600 - total flux cleaned = -0.00377952 Jy ! Component: 3650 - total flux cleaned = -0.00380876 Jy ! Component: 3700 - total flux cleaned = -0.00369319 Jy ! Component: 3750 - total flux cleaned = -0.00380803 Jy ! Component: 3800 - total flux cleaned = -0.00372249 Jy ! Component: 3850 - total flux cleaned = -0.00360938 Jy ! Component: 3900 - total flux cleaned = -0.00355339 Jy ! Component: 3950 - total flux cleaned = -0.00355345 Jy ! Component: 4000 - total flux cleaned = -0.00355357 Jy ! Component: 4050 - total flux cleaned = -0.0035539 Jy ! Total flux subtracted in 4096 components = -0.00355404 Jy ! Clean residual min=-0.001615 max=0.001551 Jy/beam ! Clean residual mean=0.000002 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.425153 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 424 components and 0.425153 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 8.271 at 4.408 degrees (North through East) ! Clean map min=-0.00412 max=0.35965 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.359653 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000506643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.42261 0.42261 0.845219 1.69044 3.38088 6.76176 13.5235 27.047 54.094 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.359 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 8.271 at 4.408 degrees (North through East) ! Clean map min=-0.00412 max=0.35965 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357-1527_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:52:35 2019