! Started logfile: J1357-1527_S_2017_01_21_pus_uvs.log on Sun May 5 15:55:50 2019 obs J1357-1527_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1357-1527_S_2017_01_21_pus_uva.fits ! AN table 1: 7 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.650794 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 656 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357-1527_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.666580Jy sigma=0.004561 ! Fit after self-cal, rms=0.662304Jy sigma=0.004533 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=6.201 mas, bpa=-4.948 degrees ! Estimated noise=5084.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.262237 Jy ! Component: 100 - total flux cleaned = 0.323293 Jy ! Total flux subtracted in 100 components = 0.323293 Jy ! Clean residual min=-0.019604 max=0.026108 Jy/beam ! Clean residual mean=-0.000007 rms=0.005883 Jy/beam ! Combined flux in latest and established models = 0.323293 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.323293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119473Jy sigma=0.000750 ! Fit after self-cal, rms=0.119488Jy sigma=0.000750 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=6.962 mas, bpa=-3.331 degrees ! Estimated noise=4379.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323239 Jy ! Component: 100 - total flux cleaned = 0.047375 Jy ! Component: 150 - total flux cleaned = 0.0563433 Jy ! Component: 200 - total flux cleaned = 0.0613876 Jy ! Total flux subtracted in 200 components = 0.0613876 Jy ! Clean residual min=-0.015639 max=0.017945 Jy/beam ! Clean residual mean=0.000012 rms=0.004103 Jy/beam ! Combined flux in latest and established models = 0.384681 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.384681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111799Jy sigma=0.000681 ! Fit after self-cal, rms=0.111782Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.06 LA 1.03 ! MK 0.98 NL 1.00 OV 1.00 PT 1.00 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.97 LA 0.95 ! MK 1.05 NL 1.00 OV 1.10 PT 1.00 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.12 LA 0.93 ! MK 1.01 NL 0.97 OV 1.01 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.03 LA 0.89 ! MK 0.81 NL 1.00* OV 1.15 PT 0.92 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.111782Jy sigma=0.000681 ! Fit after self-cal, rms=0.107601Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=6.928 mas, bpa=-3.426 degrees ! Estimated noise=4358.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826281 Jy ! Component: 100 - total flux cleaned = 0.000942141 Jy ! Component: 150 - total flux cleaned = 0.000945727 Jy ! Component: 200 - total flux cleaned = 0.000952086 Jy ! Total flux subtracted in 200 components = 0.000952086 Jy ! Clean residual min=-0.012664 max=0.014707 Jy/beam ! Clean residual mean=-0.000001 rms=0.003213 Jy/beam ! Combined flux in latest and established models = 0.385633 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.385633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107412Jy sigma=0.000658 ! Fit after self-cal, rms=0.107515Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107515Jy sigma=0.000658 ! Fit after self-cal, rms=0.107554Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=6.926 mas, bpa=-3.405 degrees ! Estimated noise=4356.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454813 Jy ! Component: 100 - total flux cleaned = 0.000539082 Jy ! Component: 150 - total flux cleaned = 0.000539143 Jy ! Component: 200 - total flux cleaned = 0.000539704 Jy ! Total flux subtracted in 200 components = 0.000539704 Jy ! Clean residual min=-0.012556 max=0.014454 Jy/beam ! Clean residual mean=-0.000001 rms=0.003169 Jy/beam ! Combined flux in latest and established models = 0.386172 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.386172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107430Jy sigma=0.000657 ! Fit after self-cal, rms=0.107452Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860699 Jy ! Component: 100 - total flux cleaned = 0.00748923 Jy ! Component: 150 - total flux cleaned = 0.00731288 Jy ! Component: 200 - total flux cleaned = 0.0080042 Jy ! Total flux subtracted in 200 components = 0.0080042 Jy ! Clean residual min=-0.010717 max=0.012097 Jy/beam ! Clean residual mean=0.000006 rms=0.002708 Jy/beam ! Combined flux in latest and established models = 0.394177 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.394177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105922Jy sigma=0.000647 ! Fit after self-cal, rms=0.105814Jy sigma=0.000647 ! Inverting map ! Added new window around map position (53, -75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010648 Jy ! Component: 100 - total flux cleaned = 0.0157768 Jy ! Component: 150 - total flux cleaned = 0.0196215 Jy ! Component: 200 - total flux cleaned = 0.0220805 Jy ! Total flux subtracted in 200 components = 0.0220805 Jy ! Clean residual min=-0.009740 max=0.010462 Jy/beam ! Clean residual mean=0.000010 rms=0.002228 Jy/beam ! Combined flux in latest and established models = 0.416257 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 89 components and 0.416257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104600Jy sigma=0.000639 ! Fit after self-cal, rms=0.104516Jy sigma=0.000639 ! Inverting map ! Added new window around map position (-13.5, 57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639414 Jy ! Component: 100 - total flux cleaned = 0.00745829 Jy ! Component: 150 - total flux cleaned = 0.00871642 Jy ! Component: 200 - total flux cleaned = 0.0098516 Jy ! Total flux subtracted in 200 components = 0.0098516 Jy ! Clean residual min=-0.008238 max=0.007137 Jy/beam ! Clean residual mean=-0.000003 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 0.426109 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 117 components and 0.426109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103573Jy sigma=0.000633 ! Fit after self-cal, rms=0.103502Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103502Jy sigma=0.000632 ! Fit after self-cal, rms=0.102573Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=6.928 mas, bpa=-3.469 degrees ! Estimated noise=4326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342542 Jy ! Component: 100 - total flux cleaned = 0.00541836 Jy ! Component: 150 - total flux cleaned = 0.00623933 Jy ! Component: 200 - total flux cleaned = 0.00677873 Jy ! Total flux subtracted in 200 components = 0.00677873 Jy ! Clean residual min=-0.007377 max=0.006527 Jy/beam ! Clean residual mean=-0.000003 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.432887 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 135 components and 0.432887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102253Jy sigma=0.000629 ! Fit after self-cal, rms=0.102222Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176523 Jy ! Component: 100 - total flux cleaned = 0.00235326 Jy ! Component: 150 - total flux cleaned = 0.00271289 Jy ! Component: 200 - total flux cleaned = 0.00280026 Jy ! Total flux subtracted in 200 components = 0.00280026 Jy ! Clean residual min=-0.007021 max=0.006314 Jy/beam ! Clean residual mean=-0.000004 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.435688 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 144 components and 0.435688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102054Jy sigma=0.000628 ! Fit after self-cal, rms=0.102041Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102041Jy sigma=0.000628 ! Fit after self-cal, rms=0.101909Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.792 mas, bmaj=14.4 mas, bpa=1.298 degrees ! Estimated noise=6042.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644395 Jy ! Component: 100 - total flux cleaned = 0.000963477 Jy ! Component: 150 - total flux cleaned = 0.00124224 Jy ! Component: 200 - total flux cleaned = 0.0013096 Jy ! Total flux subtracted in 200 components = 0.0013096 Jy ! Clean residual min=-0.005335 max=0.004575 Jy/beam ! Clean residual mean=-0.000008 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.436997 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 170 components and 0.436997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101876Jy sigma=0.000628 ! Fit after self-cal, rms=0.101866Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.19233e-05 Jy ! Component: 100 - total flux cleaned = 9.15961e-05 Jy ! Component: 150 - total flux cleaned = 0.000198737 Jy ! Component: 200 - total flux cleaned = 0.000198595 Jy ! Total flux subtracted in 200 components = 0.000198595 Jy ! Clean residual min=-0.005068 max=0.004338 Jy/beam ! Clean residual mean=-0.000007 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.437196 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 177 components and 0.437196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101857Jy sigma=0.000628 ! Fit after self-cal, rms=0.101852Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=6.931 mas, bpa=-3.49 degrees ! Estimated noise=4319.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.735 x 6.931 at -3.49 degrees (North through East) ! Clean map min=-0.0064204 max=0.33769 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=6.186 mas, bpa=-5.189 degrees ! Estimated noise=5033.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.259208 Jy ! Component: 100 - total flux cleaned = 0.321347 Jy ! Component: 150 - total flux cleaned = 0.348708 Jy ! Component: 200 - total flux cleaned = 0.367164 Jy ! Total flux subtracted in 200 components = 0.367164 Jy ! Clean residual min=-0.013727 max=0.016031 Jy/beam ! Clean residual mean=-0.000009 rms=0.003859 Jy/beam ! Combined flux in latest and established models = 0.367164 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.367164 Jy ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=6.931 mas, bpa=-3.49 degrees ! Estimated noise=4319.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173404 Jy ! Component: 100 - total flux cleaned = 0.028613 Jy ! Component: 150 - total flux cleaned = 0.0358519 Jy ! Component: 200 - total flux cleaned = 0.0413616 Jy ! Total flux subtracted in 200 components = 0.0413616 Jy ! Clean residual min=-0.011096 max=0.009570 Jy/beam ! Clean residual mean=-0.000006 rms=0.002444 Jy/beam ! Combined flux in latest and established models = 0.408525 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 52 components and 0.408525 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.792 mas, bmaj=14.4 mas, bpa=1.298 degrees ! Estimated noise=6042.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915541 Jy ! Component: 100 - total flux cleaned = 0.0140101 Jy ! Component: 150 - total flux cleaned = 0.0175957 Jy ! Component: 200 - total flux cleaned = 0.0202607 Jy ! Total flux subtracted in 200 components = 0.0202607 Jy ! Clean residual min=-0.006334 max=0.005329 Jy/beam ! Clean residual mean=-0.000007 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 0.428786 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226703 Jy ! Component: 100 - total flux cleaned = 0.00421188 Jy ! Component: 150 - total flux cleaned = 0.00606607 Jy ! Component: 200 - total flux cleaned = 0.00729162 Jy ! Total flux subtracted in 200 components = 0.00729162 Jy ! Clean residual min=-0.005177 max=0.004832 Jy/beam ! Clean residual mean=-0.000006 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.436077 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 84 components and 0.436077 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=6.931 mas, bpa=-3.49 degrees ! Estimated noise=4319.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.46957e-05 Jy ! Component: 100 - total flux cleaned = -0.000201627 Jy ! Component: 150 - total flux cleaned = -0.000194285 Jy ! Component: 200 - total flux cleaned = -4.68256e-05 Jy ! Total flux subtracted in 200 components = -4.68256e-05 Jy ! Clean residual min=-0.008109 max=0.006987 Jy/beam ! Clean residual mean=-0.000003 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.436031 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 105 components and 0.436031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102375Jy sigma=0.000631 ! Fit after self-cal, rms=0.102360Jy sigma=0.000630 wmodel J1357-1527_S_2017_01_21_pus_map.mod ! Writing 105 model components to file: J1357-1527_S_2017_01_21_pus_map.mod wobs J1357-1527_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1357-1527_S_2017_01_21_pus_uvs.fits wwins J1357-1527_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1357-1527_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131598 Jy ! Component: 100 - total flux cleaned = -0.000851633 Jy ! Component: 150 - total flux cleaned = -0.000525872 Jy ! Component: 200 - total flux cleaned = -0.000420555 Jy ! Component: 250 - total flux cleaned = -2.07868e-05 Jy ! Component: 300 - total flux cleaned = -2.16972e-05 Jy ! Component: 350 - total flux cleaned = 0.000336584 Jy ! Component: 400 - total flux cleaned = 0.000508964 Jy ! Component: 450 - total flux cleaned = 0.000842858 Jy ! Component: 500 - total flux cleaned = 0.001329 Jy ! Component: 550 - total flux cleaned = 0.00226986 Jy ! Component: 600 - total flux cleaned = 0.00302948 Jy ! Component: 650 - total flux cleaned = 0.00384208 Jy ! Component: 700 - total flux cleaned = 0.00449062 Jy ! Component: 750 - total flux cleaned = 0.00512186 Jy ! Component: 800 - total flux cleaned = 0.00560326 Jy ! Component: 850 - total flux cleaned = 0.00614065 Jy ! Component: 900 - total flux cleaned = 0.00659944 Jy ! Component: 950 - total flux cleaned = 0.00704765 Jy ! Component: 1000 - total flux cleaned = 0.00729957 Jy ! Component: 1050 - total flux cleaned = 0.00760837 Jy ! Component: 1100 - total flux cleaned = 0.00784911 Jy ! Component: 1150 - total flux cleaned = 0.00796732 Jy ! Component: 1200 - total flux cleaned = 0.00808346 Jy ! Component: 1250 - total flux cleaned = 0.00825385 Jy ! Component: 1300 - total flux cleaned = 0.00830976 Jy ! Component: 1350 - total flux cleaned = 0.00847602 Jy ! Component: 1400 - total flux cleaned = 0.00863967 Jy ! Component: 1450 - total flux cleaned = 0.00880052 Jy ! Component: 1500 - total flux cleaned = 0.00890523 Jy ! Component: 1550 - total flux cleaned = 0.0086985 Jy ! Component: 1600 - total flux cleaned = 0.00875033 Jy ! Component: 1650 - total flux cleaned = 0.0085991 Jy ! Component: 1700 - total flux cleaned = 0.00864943 Jy ! Component: 1750 - total flux cleaned = 0.00850197 Jy ! Component: 1800 - total flux cleaned = 0.00850175 Jy ! Component: 1850 - total flux cleaned = 0.00826234 Jy ! Component: 1900 - total flux cleaned = 0.00826247 Jy ! Component: 1950 - total flux cleaned = 0.0081223 Jy ! Component: 2000 - total flux cleaned = 0.0080301 Jy ! Component: 2050 - total flux cleaned = 0.00789331 Jy ! Component: 2100 - total flux cleaned = 0.00771282 Jy ! Component: 2150 - total flux cleaned = 0.00753494 Jy ! Component: 2200 - total flux cleaned = 0.00744709 Jy ! Component: 2250 - total flux cleaned = 0.00731676 Jy ! Component: 2300 - total flux cleaned = 0.00731639 Jy ! Component: 2350 - total flux cleaned = 0.00714575 Jy ! Component: 2400 - total flux cleaned = 0.00706198 Jy ! Component: 2450 - total flux cleaned = 0.00710388 Jy ! Component: 2500 - total flux cleaned = 0.00706253 Jy ! Component: 2550 - total flux cleaned = 0.0070217 Jy ! Component: 2600 - total flux cleaned = 0.0070625 Jy ! Component: 2650 - total flux cleaned = 0.00706288 Jy ! Component: 2700 - total flux cleaned = 0.00726337 Jy ! Component: 2750 - total flux cleaned = 0.0072632 Jy ! Component: 2800 - total flux cleaned = 0.00730292 Jy ! Component: 2850 - total flux cleaned = 0.00738203 Jy ! Component: 2900 - total flux cleaned = 0.00746027 Jy ! Component: 2950 - total flux cleaned = 0.00746011 Jy ! Component: 3000 - total flux cleaned = 0.00734302 Jy ! Component: 3050 - total flux cleaned = 0.00738213 Jy ! Component: 3100 - total flux cleaned = 0.00738222 Jy ! Component: 3150 - total flux cleaned = 0.00730443 Jy ! Component: 3200 - total flux cleaned = 0.00734323 Jy ! Component: 3250 - total flux cleaned = 0.00726593 Jy ! Component: 3300 - total flux cleaned = 0.00714969 Jy ! Component: 3350 - total flux cleaned = 0.007111 Jy ! Component: 3400 - total flux cleaned = 0.00703341 Jy ! Component: 3450 - total flux cleaned = 0.0070723 Jy ! Component: 3500 - total flux cleaned = 0.00699423 Jy ! Component: 3550 - total flux cleaned = 0.00703326 Jy ! Component: 3600 - total flux cleaned = 0.00707237 Jy ! Component: 3650 - total flux cleaned = 0.00695467 Jy ! Component: 3700 - total flux cleaned = 0.00703329 Jy ! Component: 3750 - total flux cleaned = 0.0070333 Jy ! Component: 3800 - total flux cleaned = 0.00707268 Jy ! Component: 3850 - total flux cleaned = 0.00707248 Jy ! Component: 3900 - total flux cleaned = 0.00707236 Jy ! Component: 3950 - total flux cleaned = 0.00707221 Jy ! Component: 4000 - total flux cleaned = 0.00719266 Jy ! Component: 4050 - total flux cleaned = 0.00715224 Jy ! Total flux subtracted in 4096 components = 0.00719319 Jy ! Clean residual min=-0.002298 max=0.002345 Jy/beam ! Clean residual mean=0.000014 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.443224 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 333 components and 0.443224 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.735 x 6.931 at -3.49 degrees (North through East) ! Clean map min=-0.0060656 max=0.33703 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.337031 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000618209 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.550284 0.550284 1.10057 2.20113 4.40227 8.80454 17.6091 35.2182 70.4363 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.337 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.735 x 6.931 at -3.49 degrees (North through East) ! Clean map min=-0.0060656 max=0.33703 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357-1527_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:55:54 2019