! Started logfile: J1357+7643_S_2017_07_16_pus_uvs.log on Thu May 9 11:10:10 2019 obs J1357+7643_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1357+7643_S_2017_07_16_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.739316 visibilities/baseline/integration-bin. ! Found source: J1357+7643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 3460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357+7643_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888208Jy sigma=0.007639 ! Fit after self-cal, rms=0.877800Jy sigma=0.007565 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=5.766 mas, bpa=71.16 degrees ! Estimated noise=2002.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0965846 Jy ! Component: 100 - total flux cleaned = 0.120123 Jy ! Total flux subtracted in 100 components = 0.120123 Jy ! Clean residual min=-0.006576 max=0.009058 Jy/beam ! Clean residual mean=-0.000022 rms=0.001704 Jy/beam ! Combined flux in latest and established models = 0.120123 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.120123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081858Jy sigma=0.000668 ! Fit after self-cal, rms=0.081851Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=6.527 mas, bpa=72.08 degrees ! Estimated noise=1587.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108468 Jy ! Component: 100 - total flux cleaned = 0.015959 Jy ! Component: 150 - total flux cleaned = 0.018586 Jy ! Component: 200 - total flux cleaned = 0.0199986 Jy ! Total flux subtracted in 200 components = 0.0199986 Jy ! Clean residual min=-0.004886 max=0.004394 Jy/beam ! Clean residual mean=0.000005 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.140122 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.140122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080551Jy sigma=0.000656 ! Fit after self-cal, rms=0.080540Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.99 KP 1.07 ! LA 1.06 MK 1.04 NL 0.87 OV 1.01 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.98 KP 0.99 ! LA 0.96 MK 1.06 NL 1.03 OV 1.02 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.05 KP 1.02 ! LA 1.02 MK 1.07 NL 0.89 OV 1.00 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.00* ! LA 1.03 MK 1.05 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.080540Jy sigma=0.000655 ! Fit after self-cal, rms=0.080547Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=6.588 mas, bpa=71.74 degrees ! Estimated noise=1591.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000727949 Jy ! Component: 100 - total flux cleaned = -0.000441667 Jy ! Component: 150 - total flux cleaned = -0.000402404 Jy ! Component: 200 - total flux cleaned = -0.000367101 Jy ! Total flux subtracted in 200 components = -0.000367101 Jy ! Clean residual min=-0.004000 max=0.004545 Jy/beam ! Clean residual mean=-0.000006 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.139755 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.139755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080492Jy sigma=0.000651 ! Fit after self-cal, rms=0.080496Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080496Jy sigma=0.000651 ! Fit after self-cal, rms=0.081774Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=6.59 mas, bpa=71.61 degrees ! Estimated noise=1590.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000438481 Jy ! Component: 100 - total flux cleaned = -0.000480511 Jy ! Component: 150 - total flux cleaned = -0.000449078 Jy ! Component: 200 - total flux cleaned = -0.000475583 Jy ! Total flux subtracted in 200 components = -0.000475583 Jy ! Clean residual min=-0.003799 max=0.004544 Jy/beam ! Clean residual mean=-0.000012 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.139279 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.139279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081742Jy sigma=0.000648 ! Fit after self-cal, rms=0.081772Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (109.5, -55.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383747 Jy ! Component: 100 - total flux cleaned = 0.00501879 Jy ! Component: 150 - total flux cleaned = 0.00532182 Jy ! Component: 200 - total flux cleaned = 0.00548191 Jy ! Total flux subtracted in 200 components = 0.00548191 Jy ! Clean residual min=-0.003519 max=0.003528 Jy/beam ! Clean residual mean=-0.000012 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.144761 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.144761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081555Jy sigma=0.000646 ! Fit after self-cal, rms=0.081536Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081536Jy sigma=0.000646 ! Fit after self-cal, rms=0.081614Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=6.577 mas, bpa=71.64 degrees ! Estimated noise=1585.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133061 Jy ! Component: 100 - total flux cleaned = 0.00159069 Jy ! Component: 150 - total flux cleaned = 0.00182377 Jy ! Component: 200 - total flux cleaned = 0.00195092 Jy ! Total flux subtracted in 200 components = 0.00195092 Jy ! Clean residual min=-0.003458 max=0.003186 Jy/beam ! Clean residual mean=-0.000008 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.146712 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.146712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081543Jy sigma=0.000645 ! Fit after self-cal, rms=0.081541Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257197 Jy ! Component: 100 - total flux cleaned = 0.000373967 Jy ! Component: 150 - total flux cleaned = 0.000518537 Jy ! Component: 200 - total flux cleaned = 0.000651337 Jy ! Total flux subtracted in 200 components = 0.000651337 Jy ! Clean residual min=-0.003433 max=0.003014 Jy/beam ! Clean residual mean=-0.000006 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.147363 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 79 components and 0.147363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081506Jy sigma=0.000645 ! Fit after self-cal, rms=0.081500Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081500Jy sigma=0.000645 ! Fit after self-cal, rms=0.081455Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.901 mas, bmaj=11.44 mas, bpa=66.35 degrees ! Estimated noise=2040.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429955 Jy ! Component: 100 - total flux cleaned = 0.000845319 Jy ! Component: 150 - total flux cleaned = 0.000981967 Jy ! Component: 200 - total flux cleaned = 0.00104064 Jy ! Total flux subtracted in 200 components = 0.00104064 Jy ! Clean residual min=-0.004157 max=0.003301 Jy/beam ! Clean residual mean=-0.000008 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.148404 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 0.148404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081450Jy sigma=0.000645 ! Fit after self-cal, rms=0.081438Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.2296e-05 Jy ! Component: 100 - total flux cleaned = 0.00021853 Jy ! Component: 150 - total flux cleaned = 0.000267109 Jy ! Component: 200 - total flux cleaned = 0.000311375 Jy ! Total flux subtracted in 200 components = 0.000311375 Jy ! Clean residual min=-0.004134 max=0.003290 Jy/beam ! Clean residual mean=-0.000006 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.148715 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 0.148715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081444Jy sigma=0.000645 ! Fit after self-cal, rms=0.081433Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=6.57 mas, bpa=71.62 degrees ! Estimated noise=1581.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 6.57 at 71.62 degrees (North through East) ! Clean map min=-0.0032875 max=0.1249 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=5.814 mas, bpa=71.01 degrees ! Estimated noise=1993.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0955546 Jy ! Component: 100 - total flux cleaned = 0.118938 Jy ! Component: 150 - total flux cleaned = 0.12872 Jy ! Component: 200 - total flux cleaned = 0.134719 Jy ! Total flux subtracted in 200 components = 0.134719 Jy ! Clean residual min=-0.004798 max=0.005069 Jy/beam ! Clean residual mean=-0.000010 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.134719 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.134719 Jy ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=6.57 mas, bpa=71.62 degrees ! Estimated noise=1581.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474568 Jy ! Component: 100 - total flux cleaned = 0.00740503 Jy ! Component: 150 - total flux cleaned = 0.00845119 Jy ! Component: 200 - total flux cleaned = 0.0091929 Jy ! Total flux subtracted in 200 components = 0.0091929 Jy ! Clean residual min=-0.003720 max=0.003651 Jy/beam ! Clean residual mean=-0.000013 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.143912 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.143912 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.901 mas, bmaj=11.44 mas, bpa=66.35 degrees ! Estimated noise=2040.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289669 Jy ! Component: 100 - total flux cleaned = 0.00373112 Jy ! Component: 150 - total flux cleaned = 0.00431957 Jy ! Component: 200 - total flux cleaned = 0.00480389 Jy ! Total flux subtracted in 200 components = 0.00480389 Jy ! Clean residual min=-0.004223 max=0.003094 Jy/beam ! Clean residual mean=-0.000010 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.148716 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363782 Jy ! Component: 100 - total flux cleaned = 0.000539578 Jy ! Component: 150 - total flux cleaned = 0.000602021 Jy ! Component: 200 - total flux cleaned = 0.000658354 Jy ! Total flux subtracted in 200 components = 0.000658354 Jy ! Clean residual min=-0.004163 max=0.003167 Jy/beam ! Clean residual mean=-0.000007 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.149374 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 72 components and 0.149374 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=6.57 mas, bpa=71.62 degrees ! Estimated noise=1581.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.88219e-05 Jy ! Component: 100 - total flux cleaned = 0.000213068 Jy ! Component: 150 - total flux cleaned = 0.000211883 Jy ! Component: 200 - total flux cleaned = 0.000110747 Jy ! Total flux subtracted in 200 components = 0.000110747 Jy ! Clean residual min=-0.003534 max=0.003324 Jy/beam ! Clean residual mean=0.000000 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.149485 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.149485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081544Jy sigma=0.000645 ! Fit after self-cal, rms=0.081541Jy sigma=0.000645 wmodel J1357+7643_S_2017_07_16_pus_map.mod ! Writing 84 model components to file: J1357+7643_S_2017_07_16_pus_map.mod wobs J1357+7643_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1357+7643_S_2017_07_16_pus_uvs.fits wwins J1357+7643_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1357+7643_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000942176 Jy ! Component: 100 - total flux cleaned = -0.00139927 Jy ! Component: 150 - total flux cleaned = -0.00108173 Jy ! Component: 200 - total flux cleaned = -0.000929258 Jy ! Component: 250 - total flux cleaned = -0.000733354 Jy ! Component: 300 - total flux cleaned = -0.00063774 Jy ! Component: 350 - total flux cleaned = -0.000637388 Jy ! Component: 400 - total flux cleaned = -0.000726865 Jy ! Component: 450 - total flux cleaned = -0.000814846 Jy ! Component: 500 - total flux cleaned = -0.000858066 Jy ! Component: 550 - total flux cleaned = -0.000899812 Jy ! Component: 600 - total flux cleaned = -0.000940114 Jy ! Component: 650 - total flux cleaned = -0.000899651 Jy ! Component: 700 - total flux cleaned = -0.000859432 Jy ! Component: 750 - total flux cleaned = -0.000743115 Jy ! Component: 800 - total flux cleaned = -0.000705685 Jy ! Component: 850 - total flux cleaned = -0.000557751 Jy ! Component: 900 - total flux cleaned = -0.000631148 Jy ! Component: 950 - total flux cleaned = -0.000596171 Jy ! Component: 1000 - total flux cleaned = -0.000735869 Jy ! Component: 1050 - total flux cleaned = -0.000735917 Jy ! Component: 1100 - total flux cleaned = -0.000600724 Jy ! Component: 1150 - total flux cleaned = -0.000667496 Jy ! Component: 1200 - total flux cleaned = -0.000635023 Jy ! Component: 1250 - total flux cleaned = -0.000700345 Jy ! Component: 1300 - total flux cleaned = -0.000923517 Jy ! Component: 1350 - total flux cleaned = -0.00101733 Jy ! Component: 1400 - total flux cleaned = -0.000955269 Jy ! Component: 1450 - total flux cleaned = -0.00104673 Jy ! Component: 1500 - total flux cleaned = -0.00110665 Jy ! Component: 1550 - total flux cleaned = -0.00107717 Jy ! Component: 1600 - total flux cleaned = -0.00113603 Jy ! Component: 1650 - total flux cleaned = -0.00116525 Jy ! Component: 1700 - total flux cleaned = -0.00107863 Jy ! Component: 1750 - total flux cleaned = -0.00102174 Jy ! Component: 1800 - total flux cleaned = -0.000937356 Jy ! Component: 1850 - total flux cleaned = -0.000937552 Jy ! Component: 1900 - total flux cleaned = -0.000799698 Jy ! Component: 1950 - total flux cleaned = -0.000717969 Jy ! Component: 2000 - total flux cleaned = -0.000636721 Jy ! Component: 2050 - total flux cleaned = -0.00055597 Jy ! Component: 2100 - total flux cleaned = -0.000396376 Jy ! Component: 2150 - total flux cleaned = -0.000291423 Jy ! Component: 2200 - total flux cleaned = -0.000213236 Jy ! Component: 2250 - total flux cleaned = -0.000161592 Jy ! Component: 2300 - total flux cleaned = -3.3816e-05 Jy ! Component: 2350 - total flux cleaned = 6.71048e-05 Jy ! Component: 2400 - total flux cleaned = 6.71825e-05 Jy ! Component: 2450 - total flux cleaned = 0.000166673 Jy ! Component: 2500 - total flux cleaned = 0.000363856 Jy ! Component: 2550 - total flux cleaned = 0.000314742 Jy ! Component: 2600 - total flux cleaned = 0.000387125 Jy ! Component: 2650 - total flux cleaned = 0.00038684 Jy ! Component: 2700 - total flux cleaned = 0.000387429 Jy ! Component: 2750 - total flux cleaned = 0.000505918 Jy ! Component: 2800 - total flux cleaned = 0.000529275 Jy ! Component: 2850 - total flux cleaned = 0.00066854 Jy ! Component: 2900 - total flux cleaned = 0.000668367 Jy ! Component: 2950 - total flux cleaned = 0.000668571 Jy ! Component: 3000 - total flux cleaned = 0.000827207 Jy ! Component: 3050 - total flux cleaned = 0.000782246 Jy ! Component: 3100 - total flux cleaned = 0.000782207 Jy ! Component: 3150 - total flux cleaned = 0.000804456 Jy ! Component: 3200 - total flux cleaned = 0.000804414 Jy ! Component: 3250 - total flux cleaned = 0.000891431 Jy ! Component: 3300 - total flux cleaned = 0.000826788 Jy ! Component: 3350 - total flux cleaned = 0.000891171 Jy ! Component: 3400 - total flux cleaned = 0.000997592 Jy ! Component: 3450 - total flux cleaned = 0.000997882 Jy ! Component: 3500 - total flux cleaned = 0.00106088 Jy ! Component: 3550 - total flux cleaned = 0.00112314 Jy ! Component: 3600 - total flux cleaned = 0.00110253 Jy ! Component: 3650 - total flux cleaned = 0.00112323 Jy ! Component: 3700 - total flux cleaned = 0.00116386 Jy ! Component: 3750 - total flux cleaned = 0.00114357 Jy ! Component: 3800 - total flux cleaned = 0.00116376 Jy ! Component: 3850 - total flux cleaned = 0.00112382 Jy ! Component: 3900 - total flux cleaned = 0.0011238 Jy ! Component: 3950 - total flux cleaned = 0.00116308 Jy ! Component: 4000 - total flux cleaned = 0.00116296 Jy ! Component: 4050 - total flux cleaned = 0.00122081 Jy ! Total flux subtracted in 4096 components = 0.00118223 Jy ! Clean residual min=-0.001107 max=0.001106 Jy/beam ! Clean residual mean=-0.000003 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.150667 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 359 components and 0.150667 Jy ![Exited script file: muppet] wmap "J1357+7643_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 6.57 at 71.62 degrees (North through East) ! Clean map min=-0.0019311 max=0.12417 Jy/beam ! Writing clean map to FITS file: J1357+7643_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124171 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000340162 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.821841 0.821841 1.64368 3.28736 6.57473 13.1495 26.2989 52.5978 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 6.57 at 71.62 degrees (North through East) ! Clean map min=-0.0019311 max=0.12417 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357+7643_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:10:14 2019