! Started logfile: J1357+7643_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:50:59 2019 obs J1357+7643_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1357+7643_S_2017_05_31_pus_uva.fits ! AN table 1: 51 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.331155 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1357+7643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 3040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357+7643_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895867Jy sigma=0.007057 ! Fit after self-cal, rms=0.872663Jy sigma=0.006889 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.082 mas, bmaj=5.309 mas, bpa=65.01 degrees ! Estimated noise=2228.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102457 Jy ! Component: 100 - total flux cleaned = 0.126886 Jy ! Total flux subtracted in 100 components = 0.126886 Jy ! Clean residual min=-0.008224 max=0.009165 Jy/beam ! Clean residual mean=-0.000043 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 0.126886 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.126886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087029Jy sigma=0.000655 ! Fit after self-cal, rms=0.087056Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.761 mas, bmaj=5.963 mas, bpa=71.32 degrees ! Estimated noise=1895.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010583 Jy ! Component: 100 - total flux cleaned = 0.0155425 Jy ! Component: 150 - total flux cleaned = 0.0181892 Jy ! Component: 200 - total flux cleaned = 0.0197388 Jy ! Total flux subtracted in 200 components = 0.0197388 Jy ! Clean residual min=-0.007377 max=0.005756 Jy/beam ! Clean residual mean=0.000067 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.146625 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.146625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085911Jy sigma=0.000645 ! Fit after self-cal, rms=0.085943Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* KP 0.99 ! LA 0.98 MK 1.00* NL 0.93 OV 1.00* ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00* KP 1.05 ! LA 1.03 MK 1.00* NL 1.00 OV 1.00* ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.00* KP 0.95 ! LA 1.04 MK 1.00* NL 0.97 OV 1.00* ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.085943Jy sigma=0.000644 ! Fit after self-cal, rms=0.086224Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.793 mas, bmaj=5.999 mas, bpa=71.25 degrees ! Estimated noise=1896.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831853 Jy ! Component: 100 - total flux cleaned = 0.0007911 Jy ! Component: 150 - total flux cleaned = 0.000825549 Jy ! Component: 200 - total flux cleaned = 0.000890268 Jy ! Total flux subtracted in 200 components = 0.000890268 Jy ! Clean residual min=-0.007009 max=0.005230 Jy/beam ! Clean residual mean=0.000055 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 0.147515 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.147515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086174Jy sigma=0.000641 ! Fit after self-cal, rms=0.086195Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086195Jy sigma=0.000641 ! Fit after self-cal, rms=0.086617Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.789 mas, bmaj=5.99 mas, bpa=70.36 degrees ! Estimated noise=1902.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444251 Jy ! Component: 100 - total flux cleaned = 0.00060921 Jy ! Component: 150 - total flux cleaned = 0.000723879 Jy ! Component: 200 - total flux cleaned = 0.000742279 Jy ! Total flux subtracted in 200 components = 0.000742279 Jy ! Clean residual min=-0.005246 max=0.004558 Jy/beam ! Clean residual mean=0.000070 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.148257 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.148257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086587Jy sigma=0.000632 ! Fit after self-cal, rms=0.086697Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124747 Jy ! Component: 100 - total flux cleaned = -0.000123781 Jy ! Component: 150 - total flux cleaned = -0.000125337 Jy ! Component: 200 - total flux cleaned = -0.000126316 Jy ! Total flux subtracted in 200 components = -0.000126316 Jy ! Clean residual min=-0.005233 max=0.004593 Jy/beam ! Clean residual mean=0.000069 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.148131 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.148131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086683Jy sigma=0.000632 ! Fit after self-cal, rms=0.086681Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086681Jy sigma=0.000632 ! Fit after self-cal, rms=0.086934Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.78 mas, bmaj=5.992 mas, bpa=70.5 degrees ! Estimated noise=1905.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411574 Jy ! Component: 100 - total flux cleaned = 0.000574397 Jy ! Component: 150 - total flux cleaned = 0.000628972 Jy ! Component: 200 - total flux cleaned = 0.00064508 Jy ! Total flux subtracted in 200 components = 0.00064508 Jy ! Clean residual min=-0.005104 max=0.004515 Jy/beam ! Clean residual mean=0.000069 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.148776 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.148776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086918Jy sigma=0.000632 ! Fit after self-cal, rms=0.086926Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.64955e-05 Jy ! Component: 100 - total flux cleaned = -6.65371e-05 Jy ! Component: 150 - total flux cleaned = -5.11218e-05 Jy ! Component: 200 - total flux cleaned = -3.64466e-05 Jy ! Total flux subtracted in 200 components = -3.64466e-05 Jy ! Clean residual min=-0.005106 max=0.004524 Jy/beam ! Clean residual mean=0.000068 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.14874 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.14874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086917Jy sigma=0.000632 ! Fit after self-cal, rms=0.086918Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086918Jy sigma=0.000632 ! Fit after self-cal, rms=0.087037Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.131 mas, bmaj=10.45 mas, bpa=74.19 degrees ! Estimated noise=2181.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.31861e-06 Jy ! Component: 100 - total flux cleaned = 0.000139079 Jy ! Component: 150 - total flux cleaned = 0.000230576 Jy ! Component: 200 - total flux cleaned = 0.000311992 Jy ! Total flux subtracted in 200 components = 0.000311992 Jy ! Clean residual min=-0.003937 max=0.004674 Jy/beam ! Clean residual mean=0.000116 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.149052 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 56 components and 0.149052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087031Jy sigma=0.000632 ! Fit after self-cal, rms=0.087029Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.48556e-05 Jy ! Component: 100 - total flux cleaned = 4.9784e-05 Jy ! Component: 150 - total flux cleaned = 9.21709e-05 Jy ! Component: 200 - total flux cleaned = 9.20342e-05 Jy ! Total flux subtracted in 200 components = 9.20342e-05 Jy ! Clean residual min=-0.003961 max=0.004667 Jy/beam ! Clean residual mean=0.000117 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.149144 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 0.149144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087030Jy sigma=0.000632 ! Fit after self-cal, rms=0.087029Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.771 mas, bmaj=5.993 mas, bpa=70.59 degrees ! Estimated noise=1907.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.771 x 5.993 at 70.59 degrees (North through East) ! Clean map min=-0.0049015 max=0.12923 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.098 mas, bmaj=5.343 mas, bpa=64.96 degrees ! Estimated noise=2231.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102122 Jy ! Component: 100 - total flux cleaned = 0.127175 Jy ! Component: 150 - total flux cleaned = 0.137197 Jy ! Component: 200 - total flux cleaned = 0.142302 Jy ! Total flux subtracted in 200 components = 0.142302 Jy ! Clean residual min=-0.006416 max=0.006064 Jy/beam ! Clean residual mean=0.000043 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.142302 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.142302 Jy ! Inverting map and beam ! Estimated beam: bmin=4.771 mas, bmaj=5.993 mas, bpa=70.59 degrees ! Estimated noise=1907.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354116 Jy ! Component: 100 - total flux cleaned = 0.00535745 Jy ! Component: 150 - total flux cleaned = 0.00573411 Jy ! Component: 200 - total flux cleaned = 0.00607824 Jy ! Total flux subtracted in 200 components = 0.00607824 Jy ! Clean residual min=-0.004971 max=0.004602 Jy/beam ! Clean residual mean=0.000060 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.148381 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.148381 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.131 mas, bmaj=10.45 mas, bpa=74.19 degrees ! Estimated noise=2181.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493766 Jy ! Component: 100 - total flux cleaned = 0.000578851 Jy ! Component: 150 - total flux cleaned = 0.000622589 Jy ! Component: 200 - total flux cleaned = 0.000677694 Jy ! Total flux subtracted in 200 components = 0.000677694 Jy ! Clean residual min=-0.003950 max=0.004686 Jy/beam ! Clean residual mean=0.000116 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.149058 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.14202e-05 Jy ! Component: 100 - total flux cleaned = 1.83292e-05 Jy ! Component: 150 - total flux cleaned = 1.85754e-05 Jy ! Component: 200 - total flux cleaned = 1.86944e-05 Jy ! Total flux subtracted in 200 components = 1.86944e-05 Jy ! Clean residual min=-0.003964 max=0.004672 Jy/beam ! Clean residual mean=0.000116 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.149077 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.149077 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.771 mas, bmaj=5.993 mas, bpa=70.59 degrees ! Estimated noise=1907.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308382 Jy ! Component: 100 - total flux cleaned = 0.000240855 Jy ! Component: 150 - total flux cleaned = 0.00016526 Jy ! Component: 200 - total flux cleaned = 0.000182301 Jy ! Total flux subtracted in 200 components = 0.000182301 Jy ! Clean residual min=-0.004936 max=0.004492 Jy/beam ! Clean residual mean=0.000067 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.149259 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.149259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087048Jy sigma=0.000632 ! Fit after self-cal, rms=0.087040Jy sigma=0.000632 wmodel J1357+7643_S_2017_05_31_pus_map.mod ! Writing 51 model components to file: J1357+7643_S_2017_05_31_pus_map.mod wobs J1357+7643_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1357+7643_S_2017_05_31_pus_uvs.fits wwins J1357+7643_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1357+7643_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111183 Jy ! Component: 100 - total flux cleaned = -0.00152231 Jy ! Component: 150 - total flux cleaned = -0.00115129 Jy ! Component: 200 - total flux cleaned = -0.000795413 Jy ! Component: 250 - total flux cleaned = -0.000321592 Jy ! Component: 300 - total flux cleaned = 7.68818e-07 Jy ! Component: 350 - total flux cleaned = 0.00049384 Jy ! Component: 400 - total flux cleaned = 0.000673124 Jy ! Component: 450 - total flux cleaned = 0.000787063 Jy ! Component: 500 - total flux cleaned = 0.00084105 Jy ! Component: 550 - total flux cleaned = 0.000894457 Jy ! Component: 600 - total flux cleaned = 0.000893659 Jy ! Component: 650 - total flux cleaned = 0.000843485 Jy ! Component: 700 - total flux cleaned = 0.000795039 Jy ! Component: 750 - total flux cleaned = 0.000795446 Jy ! Component: 800 - total flux cleaned = 0.000749864 Jy ! Component: 850 - total flux cleaned = 0.000839448 Jy ! Component: 900 - total flux cleaned = 0.000796635 Jy ! Component: 950 - total flux cleaned = 0.000966843 Jy ! Component: 1000 - total flux cleaned = 0.00096597 Jy ! Component: 1050 - total flux cleaned = 0.000923677 Jy ! Component: 1100 - total flux cleaned = 0.000924147 Jy ! Component: 1150 - total flux cleaned = 0.000963743 Jy ! Component: 1200 - total flux cleaned = 0.00104068 Jy ! Component: 1250 - total flux cleaned = 0.00111581 Jy ! Component: 1300 - total flux cleaned = 0.00119024 Jy ! Component: 1350 - total flux cleaned = 0.00122675 Jy ! Component: 1400 - total flux cleaned = 0.00126208 Jy ! Component: 1450 - total flux cleaned = 0.00129674 Jy ! Component: 1500 - total flux cleaned = 0.0012972 Jy ! Component: 1550 - total flux cleaned = 0.00139909 Jy ! Component: 1600 - total flux cleaned = 0.00143273 Jy ! Component: 1650 - total flux cleaned = 0.00153168 Jy ! Component: 1700 - total flux cleaned = 0.0016291 Jy ! Component: 1750 - total flux cleaned = 0.00175635 Jy ! Component: 1800 - total flux cleaned = 0.00188203 Jy ! Component: 1850 - total flux cleaned = 0.00203653 Jy ! Component: 1900 - total flux cleaned = 0.00215857 Jy ! Component: 1950 - total flux cleaned = 0.00230923 Jy ! Component: 2000 - total flux cleaned = 0.00245767 Jy ! Component: 2050 - total flux cleaned = 0.00266244 Jy ! Component: 2100 - total flux cleaned = 0.00274847 Jy ! Component: 2150 - total flux cleaned = 0.00289092 Jy ! Component: 2200 - total flux cleaned = 0.00300367 Jy ! Component: 2250 - total flux cleaned = 0.00308707 Jy ! Component: 2300 - total flux cleaned = 0.0031146 Jy ! Component: 2350 - total flux cleaned = 0.00314183 Jy ! Component: 2400 - total flux cleaned = 0.0031957 Jy ! Component: 2450 - total flux cleaned = 0.00330235 Jy ! Component: 2500 - total flux cleaned = 0.00332886 Jy ! Component: 2550 - total flux cleaned = 0.00345871 Jy ! Component: 2600 - total flux cleaned = 0.00350991 Jy ! Component: 2650 - total flux cleaned = 0.00353517 Jy ! Component: 2700 - total flux cleaned = 0.00358528 Jy ! Component: 2750 - total flux cleaned = 0.00360998 Jy ! Component: 2800 - total flux cleaned = 0.00365946 Jy ! Component: 2850 - total flux cleaned = 0.00365962 Jy ! Component: 2900 - total flux cleaned = 0.00373239 Jy ! Component: 2950 - total flux cleaned = 0.00378029 Jy ! Component: 3000 - total flux cleaned = 0.00389874 Jy ! Component: 3050 - total flux cleaned = 0.00403973 Jy ! Component: 3100 - total flux cleaned = 0.00417973 Jy ! Component: 3150 - total flux cleaned = 0.00427233 Jy ! Component: 3200 - total flux cleaned = 0.00447875 Jy ! Component: 3250 - total flux cleaned = 0.00459254 Jy ! Component: 3300 - total flux cleaned = 0.00472795 Jy ! Component: 3350 - total flux cleaned = 0.00477254 Jy ! Component: 3400 - total flux cleaned = 0.00483927 Jy ! Component: 3450 - total flux cleaned = 0.00499391 Jy ! Component: 3500 - total flux cleaned = 0.00505973 Jy ! Component: 3550 - total flux cleaned = 0.0051252 Jy ! Component: 3600 - total flux cleaned = 0.00534209 Jy ! Component: 3650 - total flux cleaned = 0.00542807 Jy ! Component: 3700 - total flux cleaned = 0.00553521 Jy ! Component: 3750 - total flux cleaned = 0.00564153 Jy ! Component: 3800 - total flux cleaned = 0.00568397 Jy ! Component: 3850 - total flux cleaned = 0.00576822 Jy ! Component: 3900 - total flux cleaned = 0.00581022 Jy ! Component: 3950 - total flux cleaned = 0.00587283 Jy ! Component: 4000 - total flux cleaned = 0.00593494 Jy ! Component: 4050 - total flux cleaned = 0.00599687 Jy ! Total flux subtracted in 4096 components = 0.00609934 Jy ! Clean residual min=-0.001299 max=0.001210 Jy/beam ! Clean residual mean=0.000005 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.155359 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 320 components and 0.155359 Jy ![Exited script file: muppet] wmap "J1357+7643_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.771 x 5.993 at 70.59 degrees (North through East) ! Clean map min=-0.0031469 max=0.1296 Jy/beam ! Writing clean map to FITS file: J1357+7643_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000341784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.791138 0.791138 1.58228 3.16455 6.3291 12.6582 25.3164 50.6328 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.771 x 5.993 at 70.59 degrees (North through East) ! Clean map min=-0.0031469 max=0.1296 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357+7643_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:51:03 2019