! Started logfile: J1357+7643_S_2017_05_27_pus_uvs.log on Fri May 3 11:08:54 2019 obs J1357+7643_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1357+7643_S_2017_05_27_pus_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.483128 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1357+7643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 2348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357+7643_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.863075Jy sigma=0.006410 ! Fit after self-cal, rms=0.856758Jy sigma=0.006411 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.729 mas, bmaj=9.851 mas, bpa=89.1 degrees ! Estimated noise=2757.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115903 Jy ! Component: 100 - total flux cleaned = 0.143431 Jy ! Total flux subtracted in 100 components = 0.143431 Jy ! Clean residual min=-0.009902 max=0.011755 Jy/beam ! Clean residual mean=-0.000010 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 0.143431 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.143431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096725Jy sigma=0.000691 ! Fit after self-cal, rms=0.096710Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=10.82 mas, bpa=88.86 degrees ! Estimated noise=2229.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109635 Jy ! Component: 100 - total flux cleaned = 0.0162076 Jy ! Component: 150 - total flux cleaned = 0.0191283 Jy ! Component: 200 - total flux cleaned = 0.0206952 Jy ! Total flux subtracted in 200 components = 0.0206952 Jy ! Clean residual min=-0.006647 max=0.005299 Jy/beam ! Clean residual mean=-0.000004 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.164126 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.164126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095487Jy sigma=0.000683 ! Fit after self-cal, rms=0.095477Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.90 HN 0.96 KP 1.03 ! LA 0.98 MK 1.05 NL 0.87 OV 1.04 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.98 KP 1.02 ! LA 0.97 MK 0.97 NL 1.03 OV 0.94 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 1.04 KP 0.91 ! LA 1.07 MK 1.02 NL 0.97 OV 0.96 ! PT 1.04 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.24 HN 1.06 KP 1.00* ! LA 1.04 MK 1.00 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.095477Jy sigma=0.000683 ! Fit after self-cal, rms=0.094290Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=10.86 mas, bpa=88.82 degrees ! Estimated noise=2233.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010578 Jy ! Component: 100 - total flux cleaned = -0.000114245 Jy ! Component: 150 - total flux cleaned = -4.91094e-05 Jy ! Component: 200 - total flux cleaned = 1.29701e-05 Jy ! Total flux subtracted in 200 components = 1.29701e-05 Jy ! Clean residual min=-0.006090 max=0.004778 Jy/beam ! Clean residual mean=-0.000010 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.164139 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.164139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094263Jy sigma=0.000675 ! Fit after self-cal, rms=0.094271Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094271Jy sigma=0.000675 ! Fit after self-cal, rms=0.094314Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=10.86 mas, bpa=88.83 degrees ! Estimated noise=2233.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263337 Jy ! Component: 100 - total flux cleaned = -0.000206293 Jy ! Component: 150 - total flux cleaned = -0.000152861 Jy ! Component: 200 - total flux cleaned = -7.88625e-05 Jy ! Total flux subtracted in 200 components = -7.88625e-05 Jy ! Clean residual min=-0.006185 max=0.004834 Jy/beam ! Clean residual mean=-0.000010 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.16406 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.16406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094299Jy sigma=0.000675 ! Fit after self-cal, rms=0.094298Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.12689e-05 Jy ! Component: 100 - total flux cleaned = -1.81451e-05 Jy ! Component: 150 - total flux cleaned = 2.67867e-05 Jy ! Component: 200 - total flux cleaned = 6.81276e-05 Jy ! Total flux subtracted in 200 components = 6.81276e-05 Jy ! Clean residual min=-0.006203 max=0.004868 Jy/beam ! Clean residual mean=-0.000010 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.164128 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.164128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094289Jy sigma=0.000675 ! Fit after self-cal, rms=0.094286Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094286Jy sigma=0.000675 ! Fit after self-cal, rms=0.094389Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=10.86 mas, bpa=88.83 degrees ! Estimated noise=2235.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229973 Jy ! Component: 100 - total flux cleaned = -0.000189402 Jy ! Component: 150 - total flux cleaned = -0.000169529 Jy ! Component: 200 - total flux cleaned = -0.000132215 Jy ! Total flux subtracted in 200 components = -0.000132215 Jy ! Clean residual min=-0.006224 max=0.004883 Jy/beam ! Clean residual mean=-0.000010 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.163996 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.163996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094382Jy sigma=0.000675 ! Fit after self-cal, rms=0.094380Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29153e-05 Jy ! Component: 100 - total flux cleaned = 3.07982e-05 Jy ! Component: 150 - total flux cleaned = 4.79943e-05 Jy ! Component: 200 - total flux cleaned = 6.33482e-05 Jy ! Total flux subtracted in 200 components = 6.33482e-05 Jy ! Clean residual min=-0.006223 max=0.004909 Jy/beam ! Clean residual mean=-0.000010 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 0.164059 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.164059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094375Jy sigma=0.000675 ! Fit after self-cal, rms=0.094373Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094373Jy sigma=0.000675 ! Fit after self-cal, rms=0.094480Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.073 mas, bmaj=13.45 mas, bpa=86.31 degrees ! Estimated noise=2773.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.21948e-05 Jy ! Component: 100 - total flux cleaned = -7.83588e-05 Jy ! Component: 150 - total flux cleaned = -0.000120821 Jy ! Component: 200 - total flux cleaned = -0.000153079 Jy ! Total flux subtracted in 200 components = -0.000153079 Jy ! Clean residual min=-0.006985 max=0.005303 Jy/beam ! Clean residual mean=-0.000019 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.163906 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.163906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094492Jy sigma=0.000675 ! Fit after self-cal, rms=0.094473Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.84961e-05 Jy ! Component: 100 - total flux cleaned = -4.83886e-05 Jy ! Component: 150 - total flux cleaned = -6.32237e-05 Jy ! Component: 200 - total flux cleaned = -7.73783e-05 Jy ! Total flux subtracted in 200 components = -7.73783e-05 Jy ! Clean residual min=-0.007005 max=0.005276 Jy/beam ! Clean residual mean=-0.000020 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.163829 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.163829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094486Jy sigma=0.000675 ! Fit after self-cal, rms=0.094474Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=10.86 mas, bpa=88.83 degrees ! Estimated noise=2237.42 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 10.86 at 88.83 degrees (North through East) ! Clean map min=-0.0060153 max=0.14849 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=9.876 mas, bpa=88.94 degrees ! Estimated noise=2756.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115592 Jy ! Component: 100 - total flux cleaned = 0.142861 Jy ! Component: 150 - total flux cleaned = 0.153618 Jy ! Component: 200 - total flux cleaned = 0.159341 Jy ! Total flux subtracted in 200 components = 0.159341 Jy ! Clean residual min=-0.007439 max=0.007889 Jy/beam ! Clean residual mean=-0.000008 rms=0.002292 Jy/beam ! Combined flux in latest and established models = 0.159341 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.159341 Jy ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=10.86 mas, bpa=88.83 degrees ! Estimated noise=2237.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330605 Jy ! Component: 100 - total flux cleaned = 0.00387672 Jy ! Component: 150 - total flux cleaned = 0.00432117 Jy ! Component: 200 - total flux cleaned = 0.00450907 Jy ! Total flux subtracted in 200 components = 0.00450907 Jy ! Clean residual min=-0.006134 max=0.004906 Jy/beam ! Clean residual mean=-0.000010 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.16385 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.16385 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.073 mas, bmaj=13.45 mas, bpa=86.31 degrees ! Estimated noise=2773.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.28626e-05 Jy ! Component: 100 - total flux cleaned = 7.7963e-05 Jy ! Component: 150 - total flux cleaned = 4.43105e-05 Jy ! Component: 200 - total flux cleaned = 1.68956e-05 Jy ! Total flux subtracted in 200 components = 1.68956e-05 Jy ! Clean residual min=-0.006954 max=0.005474 Jy/beam ! Clean residual mean=-0.000019 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.163867 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.30076e-05 Jy ! Component: 100 - total flux cleaned = -2.22223e-05 Jy ! Component: 150 - total flux cleaned = -2.27559e-05 Jy ! Component: 200 - total flux cleaned = -3.96473e-05 Jy ! Total flux subtracted in 200 components = -3.96473e-05 Jy ! Clean residual min=-0.006956 max=0.005399 Jy/beam ! Clean residual mean=-0.000020 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 0.163827 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.163827 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=10.86 mas, bpa=88.83 degrees ! Estimated noise=2237.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272758 Jy ! Component: 100 - total flux cleaned = 0.000271534 Jy ! Component: 150 - total flux cleaned = 0.000263384 Jy ! Component: 200 - total flux cleaned = 0.00035772 Jy ! Total flux subtracted in 200 components = 0.00035772 Jy ! Clean residual min=-0.006222 max=0.004924 Jy/beam ! Clean residual mean=-0.000010 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.164185 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.164185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094512Jy sigma=0.000675 ! Fit after self-cal, rms=0.094503Jy sigma=0.000675 wmodel J1357+7643_S_2017_05_27_pus_map.mod ! Writing 57 model components to file: J1357+7643_S_2017_05_27_pus_map.mod wobs J1357+7643_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1357+7643_S_2017_05_27_pus_uvs.fits wwins J1357+7643_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1357+7643_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00260394 Jy ! Component: 100 - total flux cleaned = -0.00333301 Jy ! Component: 150 - total flux cleaned = -0.00291368 Jy ! Component: 200 - total flux cleaned = -0.00196114 Jy ! Component: 250 - total flux cleaned = -0.00120959 Jy ! Component: 300 - total flux cleaned = -0.000343463 Jy ! Component: 350 - total flux cleaned = 0.000626988 Jy ! Component: 400 - total flux cleaned = 0.00142885 Jy ! Component: 450 - total flux cleaned = 0.00239904 Jy ! Component: 500 - total flux cleaned = 0.003338 Jy ! Component: 550 - total flux cleaned = 0.00394581 Jy ! Component: 600 - total flux cleaned = 0.0047732 Jy ! Component: 650 - total flux cleaned = 0.00540553 Jy ! Component: 700 - total flux cleaned = 0.00613163 Jy ! Component: 750 - total flux cleaned = 0.00645695 Jy ! Component: 800 - total flux cleaned = 0.00672256 Jy ! Component: 850 - total flux cleaned = 0.00698184 Jy ! Component: 900 - total flux cleaned = 0.00723525 Jy ! Component: 950 - total flux cleaned = 0.00748379 Jy ! Component: 1000 - total flux cleaned = 0.00782244 Jy ! Component: 1050 - total flux cleaned = 0.00801175 Jy ! Component: 1100 - total flux cleaned = 0.00819759 Jy ! Component: 1150 - total flux cleaned = 0.00851695 Jy ! Component: 1200 - total flux cleaned = 0.00882926 Jy ! Component: 1250 - total flux cleaned = 0.00913473 Jy ! Component: 1300 - total flux cleaned = 0.00947873 Jy ! Component: 1350 - total flux cleaned = 0.00981461 Jy ! Component: 1400 - total flux cleaned = 0.0101444 Jy ! Component: 1450 - total flux cleaned = 0.0103875 Jy ! Component: 1500 - total flux cleaned = 0.0107061 Jy ! Component: 1550 - total flux cleaned = 0.0109411 Jy ! Component: 1600 - total flux cleaned = 0.0112497 Jy ! Component: 1650 - total flux cleaned = 0.0114013 Jy ! Component: 1700 - total flux cleaned = 0.0115889 Jy ! Component: 1750 - total flux cleaned = 0.0117004 Jy ! Component: 1800 - total flux cleaned = 0.0118094 Jy ! Component: 1850 - total flux cleaned = 0.0117745 Jy ! Component: 1900 - total flux cleaned = 0.0119156 Jy ! Component: 1950 - total flux cleaned = 0.0118457 Jy ! Component: 2000 - total flux cleaned = 0.0117762 Jy ! Component: 2050 - total flux cleaned = 0.0116752 Jy ! Component: 2100 - total flux cleaned = 0.0116756 Jy ! Component: 2150 - total flux cleaned = 0.0115762 Jy ! Component: 2200 - total flux cleaned = 0.0115763 Jy ! Component: 2250 - total flux cleaned = 0.0115116 Jy ! Component: 2300 - total flux cleaned = 0.0114148 Jy ! Component: 2350 - total flux cleaned = 0.0111922 Jy ! Component: 2400 - total flux cleaned = 0.0110352 Jy ! Component: 2450 - total flux cleaned = 0.010973 Jy ! Component: 2500 - total flux cleaned = 0.0108188 Jy ! Component: 2550 - total flux cleaned = 0.0107882 Jy ! Component: 2600 - total flux cleaned = 0.0107578 Jy ! Component: 2650 - total flux cleaned = 0.0106078 Jy ! Component: 2700 - total flux cleaned = 0.0105189 Jy ! Component: 2750 - total flux cleaned = 0.0104308 Jy ! Component: 2800 - total flux cleaned = 0.0104307 Jy ! Component: 2850 - total flux cleaned = 0.0103733 Jy ! Component: 2900 - total flux cleaned = 0.0102875 Jy ! Component: 2950 - total flux cleaned = 0.0102306 Jy ! Component: 3000 - total flux cleaned = 0.0102587 Jy ! Component: 3050 - total flux cleaned = 0.0102023 Jy ! Component: 3100 - total flux cleaned = 0.0101741 Jy ! Component: 3150 - total flux cleaned = 0.0100912 Jy ! Component: 3200 - total flux cleaned = 0.0101458 Jy ! Component: 3250 - total flux cleaned = 0.0100098 Jy ! Component: 3300 - total flux cleaned = 0.00995614 Jy ! Component: 3350 - total flux cleaned = 0.0100097 Jy ! Component: 3400 - total flux cleaned = 0.00993018 Jy ! Component: 3450 - total flux cleaned = 0.00987742 Jy ! Component: 3500 - total flux cleaned = 0.00972063 Jy ! Component: 3550 - total flux cleaned = 0.00979885 Jy ! Component: 3600 - total flux cleaned = 0.00982457 Jy ! Component: 3650 - total flux cleaned = 0.00977327 Jy ! Component: 3700 - total flux cleaned = 0.00982425 Jy ! Component: 3750 - total flux cleaned = 0.0097991 Jy ! Component: 3800 - total flux cleaned = 0.00984965 Jy ! Component: 3850 - total flux cleaned = 0.00979934 Jy ! Component: 3900 - total flux cleaned = 0.00977431 Jy ! Component: 3950 - total flux cleaned = 0.00972469 Jy ! Component: 4000 - total flux cleaned = 0.00974955 Jy ! Component: 4050 - total flux cleaned = 0.00962649 Jy ! Total flux subtracted in 4096 components = 0.00955294 Jy ! Clean residual min=-0.001250 max=0.001721 Jy/beam ! Clean residual mean=-0.000005 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.173738 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 371 components and 0.173738 Jy ![Exited script file: muppet] wmap "J1357+7643_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 10.86 at 88.83 degrees (North through East) ! Clean map min=-0.0034766 max=0.14881 Jy/beam ! Writing clean map to FITS file: J1357+7643_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148806 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000439184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.885418 0.885418 1.77084 3.54167 7.08334 14.1667 28.3334 56.6667 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 10.86 at 88.83 degrees (North through East) ! Clean map min=-0.0034766 max=0.14881 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357+7643_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:08:58 2019