! Started logfile: J1357+7643_S_2017_02_19_pus_uvs.log on Sat May 4 18:52:35 2019 obs J1357+7643_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1357+7643_S_2017_02_19_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551852 visibilities/baseline/integration-bin. ! Found source: J1357+7643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357+7643_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.868437Jy sigma=0.007692 ! Fit after self-cal, rms=0.863716Jy sigma=0.007652 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=10.2 mas, bpa=50.78 degrees ! Estimated noise=2847.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10612 Jy ! Component: 100 - total flux cleaned = 0.129263 Jy ! Total flux subtracted in 100 components = 0.129263 Jy ! Clean residual min=-0.008436 max=0.008914 Jy/beam ! Clean residual mean=-0.000006 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.129263 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.129263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079554Jy sigma=0.000662 ! Fit after self-cal, rms=0.079550Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=10.67 mas, bpa=51.18 degrees ! Estimated noise=2579.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00811819 Jy ! Component: 100 - total flux cleaned = 0.0132425 Jy ! Component: 150 - total flux cleaned = 0.0167018 Jy ! Component: 200 - total flux cleaned = 0.0180237 Jy ! Total flux subtracted in 200 components = 0.0180237 Jy ! Clean residual min=-0.007704 max=0.007147 Jy/beam ! Clean residual mean=0.000001 rms=0.001942 Jy/beam ! Combined flux in latest and established models = 0.147286 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.147286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078355Jy sigma=0.000655 ! Fit after self-cal, rms=0.078331Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.06 HN 1.02 KP 0.98 ! LA 0.95 MK 1.00* NL 0.89 OV 1.05 ! PT 1.00* SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.07 HN 1.03 KP 1.04 ! LA 0.99 MK 1.00* NL 0.93 OV 1.08 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.13 HN 0.96 KP 0.84 ! LA 0.78 MK 1.00* NL 1.11 OV 1.00 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 HN 0.97 KP 1.00* ! LA 0.82 MK 1.00* NL 1.00* OV 1.11 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.078331Jy sigma=0.000655 ! Fit after self-cal, rms=0.073613Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=10.76 mas, bpa=51.09 degrees ! Estimated noise=2553.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.49352e-05 Jy ! Component: 100 - total flux cleaned = -0.000808147 Jy ! Component: 150 - total flux cleaned = -0.00125468 Jy ! Component: 200 - total flux cleaned = -0.00164062 Jy ! Total flux subtracted in 200 components = -0.00164062 Jy ! Clean residual min=-0.005577 max=0.004796 Jy/beam ! Clean residual mean=0.000004 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.145646 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.145646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073510Jy sigma=0.000637 ! Fit after self-cal, rms=0.073461Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073461Jy sigma=0.000636 ! Fit after self-cal, rms=0.073529Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=10.76 mas, bpa=50.99 degrees ! Estimated noise=2554.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549466 Jy ! Component: 100 - total flux cleaned = 0.0002873 Jy ! Component: 150 - total flux cleaned = -1.77572e-05 Jy ! Component: 200 - total flux cleaned = -0.000257175 Jy ! Total flux subtracted in 200 components = -0.000257175 Jy ! Clean residual min=-0.005343 max=0.004578 Jy/beam ! Clean residual mean=0.000003 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.145389 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.145389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073484Jy sigma=0.000636 ! Fit after self-cal, rms=0.073486Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.74373e-05 Jy ! Component: 100 - total flux cleaned = -0.000217759 Jy ! Component: 150 - total flux cleaned = -0.000356313 Jy ! Component: 200 - total flux cleaned = -0.000460044 Jy ! Total flux subtracted in 200 components = -0.000460044 Jy ! Clean residual min=-0.005263 max=0.004462 Jy/beam ! Clean residual mean=0.000003 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.144929 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.144929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073466Jy sigma=0.000636 ! Fit after self-cal, rms=0.073465Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073465Jy sigma=0.000636 ! Fit after self-cal, rms=0.073467Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=10.76 mas, bpa=50.9 degrees ! Estimated noise=2551.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035796 Jy ! Component: 100 - total flux cleaned = 0.000308672 Jy ! Component: 150 - total flux cleaned = 0.000236852 Jy ! Component: 200 - total flux cleaned = 0.000150461 Jy ! Total flux subtracted in 200 components = 0.000150461 Jy ! Clean residual min=-0.005081 max=0.004467 Jy/beam ! Clean residual mean=0.000003 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.145079 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.145079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073449Jy sigma=0.000636 ! Fit after self-cal, rms=0.073453Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.89578e-05 Jy ! Component: 100 - total flux cleaned = -0.000140042 Jy ! Component: 150 - total flux cleaned = -0.000178486 Jy ! Component: 200 - total flux cleaned = -0.00021477 Jy ! Total flux subtracted in 200 components = -0.00021477 Jy ! Clean residual min=-0.005035 max=0.004406 Jy/beam ! Clean residual mean=0.000003 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.144864 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.144864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073443Jy sigma=0.000635 ! Fit after self-cal, rms=0.073442Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073442Jy sigma=0.000635 ! Fit after self-cal, rms=0.073454Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.805 mas, bmaj=11.27 mas, bpa=53.78 degrees ! Estimated noise=3146.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.06115e-05 Jy ! Component: 100 - total flux cleaned = -0.000120234 Jy ! Component: 150 - total flux cleaned = -0.000166997 Jy ! Component: 200 - total flux cleaned = -0.000210663 Jy ! Total flux subtracted in 200 components = -0.000210663 Jy ! Clean residual min=-0.004676 max=0.005565 Jy/beam ! Clean residual mean=0.000005 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.144654 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.144654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073446Jy sigma=0.000635 ! Fit after self-cal, rms=0.073447Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.94956e-05 Jy ! Component: 100 - total flux cleaned = -7.26803e-05 Jy ! Component: 150 - total flux cleaned = -9.1335e-05 Jy ! Component: 200 - total flux cleaned = -0.000127407 Jy ! Total flux subtracted in 200 components = -0.000127407 Jy ! Clean residual min=-0.004692 max=0.005494 Jy/beam ! Clean residual mean=0.000005 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.144526 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.144526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073444Jy sigma=0.000635 ! Fit after self-cal, rms=0.073442Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=10.76 mas, bpa=50.85 degrees ! Estimated noise=2549.88 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.615 x 10.76 at 50.85 degrees (North through East) ! Clean map min=-0.0049517 max=0.13569 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=10.27 mas, bpa=50.31 degrees ! Estimated noise=2793.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104038 Jy ! Component: 100 - total flux cleaned = 0.126725 Jy ! Component: 150 - total flux cleaned = 0.13277 Jy ! Component: 200 - total flux cleaned = 0.135991 Jy ! Total flux subtracted in 200 components = 0.135991 Jy ! Clean residual min=-0.006620 max=0.005419 Jy/beam ! Clean residual mean=-0.000002 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.135991 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.135991 Jy ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=10.76 mas, bpa=50.85 degrees ! Estimated noise=2549.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452142 Jy ! Component: 100 - total flux cleaned = 0.00611419 Jy ! Component: 150 - total flux cleaned = 0.00713947 Jy ! Component: 200 - total flux cleaned = 0.0080394 Jy ! Total flux subtracted in 200 components = 0.0080394 Jy ! Clean residual min=-0.005781 max=0.004859 Jy/beam ! Clean residual mean=0.000002 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.144031 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.144031 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.805 mas, bmaj=11.27 mas, bpa=53.78 degrees ! Estimated noise=3146.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893641 Jy ! Component: 100 - total flux cleaned = 0.000997451 Jy ! Component: 150 - total flux cleaned = 0.00113299 Jy ! Component: 200 - total flux cleaned = 0.00125177 Jy ! Total flux subtracted in 200 components = 0.00125177 Jy ! Clean residual min=-0.004808 max=0.005663 Jy/beam ! Clean residual mean=0.000005 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.145282 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.61306e-05 Jy ! Component: 100 - total flux cleaned = 3.48229e-06 Jy ! Component: 150 - total flux cleaned = 4.34936e-06 Jy ! Component: 200 - total flux cleaned = -5.04474e-05 Jy ! Total flux subtracted in 200 components = -5.04474e-05 Jy ! Clean residual min=-0.004756 max=0.005561 Jy/beam ! Clean residual mean=0.000005 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.145232 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 65 components and 0.145232 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=10.76 mas, bpa=50.85 degrees ! Estimated noise=2549.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.06388e-05 Jy ! Component: 100 - total flux cleaned = 0.000106031 Jy ! Component: 150 - total flux cleaned = 0.000259566 Jy ! Component: 200 - total flux cleaned = 0.000258567 Jy ! Total flux subtracted in 200 components = 0.000258567 Jy ! Clean residual min=-0.005196 max=0.004654 Jy/beam ! Clean residual mean=0.000003 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.145491 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.145491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073481Jy sigma=0.000636 ! Fit after self-cal, rms=0.073479Jy sigma=0.000636 wmodel J1357+7643_S_2017_02_19_pus_map.mod ! Writing 76 model components to file: J1357+7643_S_2017_02_19_pus_map.mod wobs J1357+7643_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1357+7643_S_2017_02_19_pus_uvs.fits wwins J1357+7643_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1357+7643_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149501 Jy ! Component: 100 - total flux cleaned = -0.00166073 Jy ! Component: 150 - total flux cleaned = -0.00137485 Jy ! Component: 200 - total flux cleaned = -0.00169154 Jy ! Component: 250 - total flux cleaned = -0.00205178 Jy ! Component: 300 - total flux cleaned = -0.00261632 Jy ! Component: 350 - total flux cleaned = -0.00288498 Jy ! Component: 400 - total flux cleaned = -0.00314272 Jy ! Component: 450 - total flux cleaned = -0.0033898 Jy ! Component: 500 - total flux cleaned = -0.00357862 Jy ! Component: 550 - total flux cleaned = -0.00380554 Jy ! Component: 600 - total flux cleaned = -0.00384933 Jy ! Component: 650 - total flux cleaned = -0.00389185 Jy ! Component: 700 - total flux cleaned = -0.00393334 Jy ! Component: 750 - total flux cleaned = -0.00389295 Jy ! Component: 800 - total flux cleaned = -0.003738 Jy ! Component: 850 - total flux cleaned = -0.00362429 Jy ! Component: 900 - total flux cleaned = -0.00340278 Jy ! Component: 950 - total flux cleaned = -0.00333126 Jy ! Component: 1000 - total flux cleaned = -0.0031216 Jy ! Component: 1050 - total flux cleaned = -0.00291646 Jy ! Component: 1100 - total flux cleaned = -0.00258256 Jy ! Component: 1150 - total flux cleaned = -0.00235326 Jy ! Component: 1200 - total flux cleaned = -0.00222419 Jy ! Component: 1250 - total flux cleaned = -0.00206547 Jy ! Component: 1300 - total flux cleaned = -0.00187821 Jy ! Component: 1350 - total flux cleaned = -0.00166402 Jy ! Component: 1400 - total flux cleaned = -0.0015434 Jy ! Component: 1450 - total flux cleaned = -0.00139517 Jy ! Component: 1500 - total flux cleaned = -0.00127884 Jy ! Component: 1550 - total flux cleaned = -0.00113577 Jy ! Component: 1600 - total flux cleaned = -0.00105103 Jy ! Component: 1650 - total flux cleaned = -0.000911576 Jy ! Component: 1700 - total flux cleaned = -0.000801898 Jy ! Component: 1750 - total flux cleaned = -0.000639225 Jy ! Component: 1800 - total flux cleaned = -0.000532336 Jy ! Component: 1850 - total flux cleaned = -0.000373835 Jy ! Component: 1900 - total flux cleaned = -0.000191564 Jy ! Component: 1950 - total flux cleaned = -8.84714e-05 Jy ! Component: 2000 - total flux cleaned = 6.40925e-05 Jy ! Component: 2050 - total flux cleaned = 0.000214847 Jy ! Component: 2100 - total flux cleaned = 0.000388733 Jy ! Component: 2150 - total flux cleaned = 0.000535794 Jy ! Component: 2200 - total flux cleaned = 0.000705347 Jy ! Component: 2250 - total flux cleaned = 0.000825124 Jy ! Component: 2300 - total flux cleaned = 0.000991015 Jy ! Component: 2350 - total flux cleaned = 0.00115518 Jy ! Component: 2400 - total flux cleaned = 0.00127124 Jy ! Component: 2450 - total flux cleaned = 0.00145484 Jy ! Component: 2500 - total flux cleaned = 0.00154559 Jy ! Component: 2550 - total flux cleaned = 0.00168039 Jy ! Component: 2600 - total flux cleaned = 0.00181401 Jy ! Component: 2650 - total flux cleaned = 0.00194624 Jy ! Component: 2700 - total flux cleaned = 0.00214292 Jy ! Component: 2750 - total flux cleaned = 0.00225129 Jy ! Component: 2800 - total flux cleaned = 0.00238043 Jy ! Component: 2850 - total flux cleaned = 0.00250839 Jy ! Component: 2900 - total flux cleaned = 0.00259292 Jy ! Component: 2950 - total flux cleaned = 0.00265605 Jy ! Component: 3000 - total flux cleaned = 0.0027601 Jy ! Component: 3050 - total flux cleaned = 0.00284282 Jy ! Component: 3100 - total flux cleaned = 0.00298673 Jy ! Component: 3150 - total flux cleaned = 0.00312947 Jy ! Component: 3200 - total flux cleaned = 0.00327142 Jy ! Component: 3250 - total flux cleaned = 0.0034325 Jy ! Component: 3300 - total flux cleaned = 0.00349258 Jy ! Component: 3350 - total flux cleaned = 0.0036521 Jy ! Component: 3400 - total flux cleaned = 0.00381066 Jy ! Component: 3450 - total flux cleaned = 0.00388963 Jy ! Component: 3500 - total flux cleaned = 0.00400781 Jy ! Component: 3550 - total flux cleaned = 0.00410579 Jy ! Component: 3600 - total flux cleaned = 0.00420349 Jy ! Component: 3650 - total flux cleaned = 0.00428143 Jy ! Component: 3700 - total flux cleaned = 0.00435924 Jy ! Component: 3750 - total flux cleaned = 0.00443669 Jy ! Component: 3800 - total flux cleaned = 0.00451425 Jy ! Component: 3850 - total flux cleaned = 0.00459158 Jy ! Component: 3900 - total flux cleaned = 0.00468809 Jy ! Component: 3950 - total flux cleaned = 0.00472663 Jy ! Component: 4000 - total flux cleaned = 0.00486167 Jy ! Component: 4050 - total flux cleaned = 0.00490028 Jy ! Total flux subtracted in 4096 components = 0.00497752 Jy ! Clean residual min=-0.001091 max=0.001204 Jy/beam ! Clean residual mean=0.000000 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.150468 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 340 components and 0.150468 Jy ![Exited script file: muppet] wmap "J1357+7643_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.615 x 10.76 at 50.85 degrees (North through East) ! Clean map min=-0.0033835 max=0.13552 Jy/beam ! Writing clean map to FITS file: J1357+7643_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135525 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031119 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.688857 0.688857 1.37771 2.75543 5.51086 11.0217 22.0434 44.0869 88.1738 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.615 x 10.76 at 50.85 degrees (North through East) ! Clean map min=-0.0033835 max=0.13552 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357+7643_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:52:39 2019