! Started logfile: J1357+4353_X_2017_08_05_pus_uvs.log on Thu May 9 18:53:28 2019 obs J1357+4353_X_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1357+4353_X_2017_08_05_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.901868 visibilities/baseline/integration-bin. ! Found source: J1357+4353 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 575 lines of history. ! ! Reading 55032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1357+4353_X_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934257Jy sigma=0.007823 ! Fit after self-cal, rms=0.916810Jy sigma=0.007684 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7346 mas, bmaj=1.304 mas, bpa=-1.637 degrees ! Estimated noise=666.432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560635 Jy ! Component: 100 - total flux cleaned = 0.0818117 Jy ! Total flux subtracted in 100 components = 0.0818117 Jy ! Clean residual min=-0.008132 max=0.023812 Jy/beam ! Clean residual mean=-0.000090 rms=0.002860 Jy/beam ! Combined flux in latest and established models = 0.0818118 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0818118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113137Jy sigma=0.000920 ! Fit after self-cal, rms=0.112658Jy sigma=0.000916 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218565 Jy ! Component: 100 - total flux cleaned = 0.0357504 Jy ! Total flux subtracted in 100 components = 0.0357504 Jy ! Clean residual min=-0.007056 max=0.017454 Jy/beam ! Clean residual mean=-0.000078 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 0.117562 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 0.117562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104586Jy sigma=0.000845 ! Fit after self-cal, rms=0.103857Jy sigma=0.000839 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-9, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185802 Jy ! Component: 100 - total flux cleaned = 0.0316577 Jy ! Total flux subtracted in 100 components = 0.0316577 Jy ! Clean residual min=-0.006484 max=0.012784 Jy/beam ! Clean residual mean=-0.000070 rms=0.001959 Jy/beam ! Combined flux in latest and established models = 0.14922 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.14922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097950Jy sigma=0.000785 ! Fit after self-cal, rms=0.097125Jy sigma=0.000778 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152045 Jy ! Component: 100 - total flux cleaned = 0.0258378 Jy ! Total flux subtracted in 100 components = 0.0258378 Jy ! Clean residual min=-0.005706 max=0.011441 Jy/beam ! Clean residual mean=-0.000062 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.175058 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.175058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092925Jy sigma=0.000740 ! Fit after self-cal, rms=0.092443Jy sigma=0.000736 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116401 Jy ! Component: 100 - total flux cleaned = 0.0199288 Jy ! Total flux subtracted in 100 components = 0.0199288 Jy ! Clean residual min=-0.005555 max=0.010579 Jy/beam ! Clean residual mean=-0.000055 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.194987 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.194987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089818Jy sigma=0.000713 ! Fit after self-cal, rms=0.089561Jy sigma=0.000711 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103811 Jy ! Component: 100 - total flux cleaned = 0.0178002 Jy ! Total flux subtracted in 100 components = 0.0178002 Jy ! Clean residual min=-0.004993 max=0.006834 Jy/beam ! Clean residual mean=-0.000050 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.212787 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.212787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087519Jy sigma=0.000694 ! Fit after self-cal, rms=0.087362Jy sigma=0.000693 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9806 mas, bmaj=1.541 mas, bpa=2.044 degrees ! Estimated noise=384.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115119 Jy ! Component: 100 - total flux cleaned = 0.019511 Jy ! Component: 150 - total flux cleaned = 0.0255748 Jy ! Component: 200 - total flux cleaned = 0.0303265 Jy ! Total flux subtracted in 200 components = 0.0303265 Jy ! Clean residual min=-0.004172 max=0.006218 Jy/beam ! Clean residual mean=-0.000090 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.243113 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 0.243113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085310Jy sigma=0.000676 ! Fit after self-cal, rms=0.085101Jy sigma=0.000674 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.11 HN 1.09 KP 1.03 ! LA 0.92 MK 0.91 NL 0.92 OV 1.06 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 1.32 KP 0.97 ! LA 0.92 MK 1.03 NL 0.88 OV 1.09 ! PT 0.97 SC 1.36 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.13 HN 1.08 KP 0.91 ! LA 0.93 MK 1.12 NL 0.92 OV 1.09 ! PT 0.91 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 1.02 KP 0.85 ! LA 0.94 MK 1.05 NL 0.94 OV 1.05 ! PT 0.95 SC 1.11 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.12 HN 1.00 KP 0.80 ! LA 0.95 MK 1.04 NL 0.91 OV 1.07 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.14 KP 0.79 ! LA 0.91 MK 1.08 NL 0.99 OV 1.09 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.11 HN 1.09 KP 0.78 ! LA 0.96 MK 0.97 NL 0.94 OV 1.15 ! PT 0.95 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.16 HN 1.11 KP 0.80 ! LA 0.92 MK 0.93 NL 0.96 OV 1.16 ! PT 0.96 SC 1.11 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.11 HN 1.17 KP 0.83 ! LA 0.94 MK 1.02 NL 0.95 OV 1.12 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.59 KP 0.87 ! LA 0.93 MK 1.09 NL 1.00 OV 1.11 ! PT 0.96 SC 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.09 HN 1.09 KP 0.91 ! LA 0.97 MK 1.04 NL 0.94 OV 1.11 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 0.96 KP 0.98 ! LA 0.93 MK 1.07 NL 0.98 OV 1.08 ! PT 0.98 SC 1.10 ! ! ! Fit before self-cal, rms=0.085101Jy sigma=0.000674 ! Fit after self-cal, rms=0.085624Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=1.001 mas, bmaj=1.574 mas, bpa=1.666 degrees ! Estimated noise=387.414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316396 Jy ! Component: 100 - total flux cleaned = 0.00179204 Jy ! Component: 150 - total flux cleaned = 0.00268929 Jy ! Component: 200 - total flux cleaned = 0.00313996 Jy ! Total flux subtracted in 200 components = 0.00313996 Jy ! Clean residual min=-0.002796 max=0.004238 Jy/beam ! Clean residual mean=-0.000012 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.246253 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.246253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085161Jy sigma=0.000658 ! Fit after self-cal, rms=0.085066Jy sigma=0.000657 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-10.6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264986 Jy ! Component: 100 - total flux cleaned = 0.00320038 Jy ! Component: 150 - total flux cleaned = 0.00372059 Jy ! Component: 200 - total flux cleaned = 0.00410203 Jy ! Total flux subtracted in 200 components = 0.00410203 Jy ! Clean residual min=-0.002571 max=0.003131 Jy/beam ! Clean residual mean=-0.000006 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.250355 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.250355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084790Jy sigma=0.000655 ! Fit after self-cal, rms=0.084719Jy sigma=0.000654 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084719Jy sigma=0.000654 ! Fit after self-cal, rms=0.084525Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9897 mas, bmaj=1.58 mas, bpa=0.1997 degrees ! Estimated noise=378.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621643 Jy ! Component: 100 - total flux cleaned = 0.00112376 Jy ! Component: 150 - total flux cleaned = 0.00133072 Jy ! Component: 200 - total flux cleaned = 0.00170527 Jy ! Total flux subtracted in 200 components = 0.00170527 Jy ! Clean residual min=-0.001905 max=0.002439 Jy/beam ! Clean residual mean=-0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.252061 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.25206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084376Jy sigma=0.000648 ! Fit after self-cal, rms=0.084414Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.6, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186677 Jy ! Component: 100 - total flux cleaned = 0.00228582 Jy ! Component: 150 - total flux cleaned = 0.00234487 Jy ! Component: 200 - total flux cleaned = 0.00251114 Jy ! Total flux subtracted in 200 components = 0.00251114 Jy ! Clean residual min=-0.001919 max=0.001943 Jy/beam ! Clean residual mean=0.000003 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.254572 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.254572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084308Jy sigma=0.000647 ! Fit after self-cal, rms=0.084289Jy sigma=0.000647 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084289Jy sigma=0.000647 ! Fit after self-cal, rms=0.083415Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9762 mas, bmaj=1.581 mas, bpa=-0.4883 degrees ! Estimated noise=372.665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000659247 Jy ! Component: 100 - total flux cleaned = 0.00113024 Jy ! Component: 150 - total flux cleaned = 0.00134021 Jy ! Component: 200 - total flux cleaned = 0.00148654 Jy ! Total flux subtracted in 200 components = 0.00148654 Jy ! Clean residual min=-0.001832 max=0.001712 Jy/beam ! Clean residual mean=-0.000000 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.256058 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 117 components and 0.256058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083345Jy sigma=0.000646 ! Fit after self-cal, rms=0.083344Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222442 Jy ! Component: 100 - total flux cleaned = 0.000324026 Jy ! Component: 150 - total flux cleaned = 0.000461988 Jy ! Component: 200 - total flux cleaned = 0.000505035 Jy ! Total flux subtracted in 200 components = 0.000505035 Jy ! Clean residual min=-0.001809 max=0.001694 Jy/beam ! Clean residual mean=0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.256563 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.256563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083295Jy sigma=0.000645 ! Fit after self-cal, rms=0.083288Jy sigma=0.000645 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083288Jy sigma=0.000645 ! Fit after self-cal, rms=0.082638Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.207 mas, bmaj=2.578 mas, bpa=3.122 degrees ! Estimated noise=460.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131477 Jy ! Component: 100 - total flux cleaned = 0.00165593 Jy ! Component: 150 - total flux cleaned = 0.00180076 Jy ! Component: 200 - total flux cleaned = 0.00192277 Jy ! Total flux subtracted in 200 components = 0.00192277 Jy ! Clean residual min=-0.001336 max=0.001369 Jy/beam ! Clean residual mean=0.000004 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.258486 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 145 components and 0.258486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082624Jy sigma=0.000645 ! Fit after self-cal, rms=0.082625Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257306 Jy ! Component: 100 - total flux cleaned = 0.000241784 Jy ! Component: 150 - total flux cleaned = 0.000256551 Jy ! Component: 200 - total flux cleaned = 0.000256266 Jy ! Total flux subtracted in 200 components = 0.000256266 Jy ! Clean residual min=-0.001301 max=0.001370 Jy/beam ! Clean residual mean=0.000005 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.258742 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 151 components and 0.258742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082616Jy sigma=0.000645 ! Fit after self-cal, rms=0.082617Jy sigma=0.000645 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9639 mas, bmaj=1.58 mas, bpa=-1.006 degrees ! Estimated noise=368.415 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9639 x 1.58 at -1.006 degrees (North through East) ! Clean map min=-0.0029184 max=0.057093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.711 mas, bmaj=1.346 mas, bpa=-3.596 degrees ! Estimated noise=638.377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520438 Jy ! Component: 100 - total flux cleaned = 0.0881046 Jy ! Component: 150 - total flux cleaned = 0.115957 Jy ! Component: 200 - total flux cleaned = 0.137955 Jy ! Total flux subtracted in 200 components = 0.137955 Jy ! Clean residual min=-0.006205 max=0.012975 Jy/beam ! Clean residual mean=-0.000049 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.137955 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.137955 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9639 mas, bmaj=1.58 mas, bpa=-1.006 degrees ! Estimated noise=368.415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281242 Jy ! Component: 100 - total flux cleaned = 0.0480629 Jy ! Component: 150 - total flux cleaned = 0.0628682 Jy ! Component: 200 - total flux cleaned = 0.0742213 Jy ! Total flux subtracted in 200 components = 0.0742213 Jy ! Clean residual min=-0.003819 max=0.007457 Jy/beam ! Clean residual mean=-0.000077 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.212176 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 58 components and 0.212176 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (2.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00909845 Jy ! Component: 100 - total flux cleaned = 0.0162755 Jy ! Component: 150 - total flux cleaned = 0.0220397 Jy ! Component: 200 - total flux cleaned = 0.0267196 Jy ! Total flux subtracted in 200 components = 0.0267196 Jy ! Clean residual min=-0.002500 max=0.002888 Jy/beam ! Clean residual mean=-0.000031 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.238895 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 87 components and 0.238895 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-0.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327255 Jy ! Component: 100 - total flux cleaned = 0.00550418 Jy ! Component: 150 - total flux cleaned = 0.00743304 Jy ! Component: 200 - total flux cleaned = 0.00911395 Jy ! Total flux subtracted in 200 components = 0.00911395 Jy ! Clean residual min=-0.001852 max=0.002125 Jy/beam ! Clean residual mean=-0.000016 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.248009 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 106 components and 0.248009 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-5.4, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187468 Jy ! Component: 100 - total flux cleaned = 0.00329252 Jy ! Component: 150 - total flux cleaned = 0.00436096 Jy ! Component: 200 - total flux cleaned = 0.00521039 Jy ! Total flux subtracted in 200 components = 0.00521039 Jy ! Clean residual min=-0.001609 max=0.001583 Jy/beam ! Clean residual mean=-0.000007 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.25322 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 128 components and 0.25322 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.207 mas, bmaj=2.578 mas, bpa=3.122 degrees ! Estimated noise=460.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206181 Jy ! Component: 100 - total flux cleaned = 0.00347401 Jy ! Component: 150 - total flux cleaned = 0.00453751 Jy ! Component: 200 - total flux cleaned = 0.00516947 Jy ! Total flux subtracted in 200 components = 0.00516947 Jy ! Clean residual min=-0.001382 max=0.001252 Jy/beam ! Clean residual mean=0.000004 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.258389 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248163 Jy ! Component: 100 - total flux cleaned = 0.000345166 Jy ! Component: 150 - total flux cleaned = 0.000433354 Jy ! Component: 200 - total flux cleaned = 0.000513464 Jy ! Total flux subtracted in 200 components = 0.000513464 Jy ! Clean residual min=-0.001309 max=0.001215 Jy/beam ! Clean residual mean=0.000005 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.258903 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 179 components and 0.258903 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9639 mas, bmaj=1.58 mas, bpa=-1.006 degrees ! Estimated noise=368.415 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739611 Jy ! Component: 100 - total flux cleaned = -0.000750697 Jy ! Component: 150 - total flux cleaned = -0.000549605 Jy ! Component: 200 - total flux cleaned = -0.000288571 Jy ! Total flux subtracted in 200 components = -0.000288571 Jy ! Clean residual min=-0.001423 max=0.001595 Jy/beam ! Clean residual mean=0.000001 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.258614 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 191 components and 0.258614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082547Jy sigma=0.000644 ! Fit after self-cal, rms=0.082461Jy sigma=0.000643 wmodel J1357+4353_X_2017_08_05_pus_map.mod ! Writing 191 model components to file: J1357+4353_X_2017_08_05_pus_map.mod wobs J1357+4353_X_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1357+4353_X_2017_08_05_pus_uvs.fits wwins J1357+4353_X_2017_08_05_pus_map.win ! wwins: Wrote 9 windows to J1357+4353_X_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.59145e-05 Jy ! Component: 100 - total flux cleaned = 0.00027636 Jy ! Component: 150 - total flux cleaned = 0.000421371 Jy ! Component: 200 - total flux cleaned = 0.00051343 Jy ! Component: 250 - total flux cleaned = 0.00055793 Jy ! Component: 300 - total flux cleaned = 0.000580184 Jy ! Component: 350 - total flux cleaned = 0.000663634 Jy ! Component: 400 - total flux cleaned = 0.000623233 Jy ! Component: 450 - total flux cleaned = 0.000662691 Jy ! Component: 500 - total flux cleaned = 0.000681939 Jy ! Component: 550 - total flux cleaned = 0.000663715 Jy ! Component: 600 - total flux cleaned = 0.000755594 Jy ! Component: 650 - total flux cleaned = 0.000809396 Jy ! Component: 700 - total flux cleaned = 0.000844693 Jy ! Component: 750 - total flux cleaned = 0.000879043 Jy ! Component: 800 - total flux cleaned = 0.000896012 Jy ! Component: 850 - total flux cleaned = 0.000929663 Jy ! Component: 900 - total flux cleaned = 0.000945989 Jy ! Component: 950 - total flux cleaned = 0.00092983 Jy ! Component: 1000 - total flux cleaned = 0.000929747 Jy ! Component: 1050 - total flux cleaned = 0.00096135 Jy ! Component: 1100 - total flux cleaned = 0.000977058 Jy ! Component: 1150 - total flux cleaned = 0.00105408 Jy ! Component: 1200 - total flux cleaned = 0.00112969 Jy ! Component: 1250 - total flux cleaned = 0.00117428 Jy ! Component: 1300 - total flux cleaned = 0.00121839 Jy ! Component: 1350 - total flux cleaned = 0.00127678 Jy ! Component: 1400 - total flux cleaned = 0.00130561 Jy ! Component: 1450 - total flux cleaned = 0.0013769 Jy ! Component: 1500 - total flux cleaned = 0.00146117 Jy ! Component: 1550 - total flux cleaned = 0.00150272 Jy ! Component: 1600 - total flux cleaned = 0.00154392 Jy ! Component: 1650 - total flux cleaned = 0.00165236 Jy ! Component: 1700 - total flux cleaned = 0.00166563 Jy ! Component: 1750 - total flux cleaned = 0.00175835 Jy ! Component: 1800 - total flux cleaned = 0.00181087 Jy ! Component: 1850 - total flux cleaned = 0.00184954 Jy ! Component: 1900 - total flux cleaned = 0.00183675 Jy ! Component: 1950 - total flux cleaned = 0.00190027 Jy ! Component: 2000 - total flux cleaned = 0.00190007 Jy ! Total flux subtracted in 2048 components = 0.00191236 Jy ! Clean residual min=-0.000620 max=0.000768 Jy/beam ! Clean residual mean=0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.260526 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 328 components and 0.260527 Jy ![Exited script file: muppet] wmap "J1357+4353_X_2017_08_05_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9639 x 1.58 at -1.006 degrees (North through East) ! Clean map min=-0.002471 max=0.055603 Jy/beam ! Writing clean map to FITS file: J1357+4353_X_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0556029 invert ! Inverting map ! Your choice of large map pixels excluded 0.0975% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227568 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22782 1.22782 2.45564 4.91128 9.82256 19.6451 39.2902 78.5805 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9639 x 1.58 at -1.006 degrees (North through East) ! Clean map min=-0.002471 max=0.055603 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357+4353_X_2017_08_05_pus_uvs.log closed on Thu May 9 18:53:33 2019