! Started logfile: J1356+4831_S_2017_08_05_pus_uvs.log on Thu May 9 19:30:12 2019 obs J1356+4831_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1356+4831_S_2017_08_05_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877973 visibilities/baseline/integration-bin. ! Found source: J1356+4831 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 18016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1356+4831_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 826 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.965290Jy sigma=0.009459 ! Fit after self-cal, rms=0.951514Jy sigma=0.009344 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=4.818 mas, bpa=-6.483 degrees ! Estimated noise=1047.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401635 Jy ! Component: 100 - total flux cleaned = 0.0489336 Jy ! Total flux subtracted in 100 components = 0.0489336 Jy ! Clean residual min=-0.003430 max=0.003556 Jy/beam ! Clean residual mean=-0.000005 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.0489336 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0489336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072155Jy sigma=0.000653 ! Fit after self-cal, rms=0.071988Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=5.772 mas, bpa=-5.26 degrees ! Estimated noise=644.138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230502 Jy ! Component: 100 - total flux cleaned = 0.00332795 Jy ! Component: 150 - total flux cleaned = 0.00358317 Jy ! Component: 200 - total flux cleaned = 0.00364902 Jy ! Total flux subtracted in 200 components = 0.00364902 Jy ! Clean residual min=-0.002117 max=0.001925 Jy/beam ! Clean residual mean=-0.000009 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0525826 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.0525826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071899Jy sigma=0.000651 ! Fit after self-cal, rms=0.071901Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 0.92 KP 1.00 ! LA 0.97 MK 1.10 NL 0.95 OV 1.00 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.15 HN 1.02 KP 1.00 ! LA 0.99 MK 0.97 NL 0.95 OV 1.05 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.25 HN 1.00 KP 0.89 ! LA 0.88 MK 1.09 NL 1.11 OV 1.03 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.91 KP 1.00* ! LA 0.72 MK 0.95 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.071901Jy sigma=0.000651 ! Fit after self-cal, rms=0.070859Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=5.745 mas, bpa=-5.317 degrees ! Estimated noise=649.877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626381 Jy ! Component: 100 - total flux cleaned = 0.0007337 Jy ! Component: 150 - total flux cleaned = 0.000810742 Jy ! Component: 200 - total flux cleaned = 0.000858724 Jy ! Total flux subtracted in 200 components = 0.000858724 Jy ! Clean residual min=-0.002084 max=0.002109 Jy/beam ! Clean residual mean=-0.000013 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0534414 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.0534414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070852Jy sigma=0.000650 ! Fit after self-cal, rms=0.070808Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070808Jy sigma=0.000650 ! Fit after self-cal, rms=0.071096Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=5.768 mas, bpa=-5.15 degrees ! Estimated noise=651.975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332335 Jy ! Component: 100 - total flux cleaned = 0.000385848 Jy ! Component: 150 - total flux cleaned = 0.000408827 Jy ! Component: 200 - total flux cleaned = 0.000429985 Jy ! Total flux subtracted in 200 components = 0.000429985 Jy ! Clean residual min=-0.001872 max=0.001876 Jy/beam ! Clean residual mean=-0.000006 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0538713 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.0538713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071094Jy sigma=0.000648 ! Fit after self-cal, rms=0.071125Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (102.5, 105.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948537 Jy ! Component: 100 - total flux cleaned = 0.000645974 Jy ! Component: 150 - total flux cleaned = 0.000336976 Jy ! Component: 200 - total flux cleaned = 0.000239568 Jy ! Total flux subtracted in 200 components = 0.000239568 Jy ! Clean residual min=-0.001760 max=0.001598 Jy/beam ! Clean residual mean=-0.000006 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0541109 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.0541109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071051Jy sigma=0.000647 ! Fit after self-cal, rms=0.071040Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071040Jy sigma=0.000647 ! Fit after self-cal, rms=0.071072Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=5.739 mas, bpa=-4.871 degrees ! Estimated noise=652.006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456277 Jy ! Component: 100 - total flux cleaned = 0.000216035 Jy ! Component: 150 - total flux cleaned = 0.000132209 Jy ! Component: 200 - total flux cleaned = 0.000107526 Jy ! Total flux subtracted in 200 components = 0.000107526 Jy ! Clean residual min=-0.001644 max=0.001556 Jy/beam ! Clean residual mean=-0.000005 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0542184 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.0542184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071037Jy sigma=0.000647 ! Fit after self-cal, rms=0.071023Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124639 Jy ! Component: 100 - total flux cleaned = 2.44351e-05 Jy ! Component: 150 - total flux cleaned = 2.52301e-05 Jy ! Component: 200 - total flux cleaned = 2.62543e-05 Jy ! Total flux subtracted in 200 components = 2.62543e-05 Jy ! Clean residual min=-0.001610 max=0.001598 Jy/beam ! Clean residual mean=-0.000004 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0542447 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.0542447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071006Jy sigma=0.000646 ! Fit after self-cal, rms=0.071004Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071004Jy sigma=0.000646 ! Fit after self-cal, rms=0.070852Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.525 mas, bmaj=9.052 mas, bpa=-1.047 degrees ! Estimated noise=824.073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165322 Jy ! Component: 100 - total flux cleaned = 0.000339699 Jy ! Component: 150 - total flux cleaned = 0.000436123 Jy ! Component: 200 - total flux cleaned = 0.000505836 Jy ! Total flux subtracted in 200 components = 0.000505836 Jy ! Clean residual min=-0.001789 max=0.001904 Jy/beam ! Clean residual mean=-0.000011 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0547505 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.0547505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070844Jy sigma=0.000646 ! Fit after self-cal, rms=0.070837Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166655 Jy ! Component: 100 - total flux cleaned = 0.000218982 Jy ! Component: 150 - total flux cleaned = 0.000276415 Jy ! Component: 200 - total flux cleaned = 0.000317369 Jy ! Total flux subtracted in 200 components = 0.000317369 Jy ! Clean residual min=-0.001739 max=0.001922 Jy/beam ! Clean residual mean=-0.000010 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0550679 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.0550679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070834Jy sigma=0.000646 ! Fit after self-cal, rms=0.070832Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=5.719 mas, bpa=-4.735 degrees ! Estimated noise=652.079 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 5.719 at -4.735 degrees (North through East) ! Clean map min=-0.0019296 max=0.050535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=4.801 mas, bpa=-5.711 degrees ! Estimated noise=1050.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040273 Jy ! Component: 100 - total flux cleaned = 0.0493187 Jy ! Component: 150 - total flux cleaned = 0.051877 Jy ! Component: 200 - total flux cleaned = 0.0528241 Jy ! Total flux subtracted in 200 components = 0.0528241 Jy ! Clean residual min=-0.003026 max=0.003350 Jy/beam ! Clean residual mean=-0.000003 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0528241 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0528241 Jy ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=5.719 mas, bpa=-4.735 degrees ! Estimated noise=652.079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415575 Jy ! Component: 100 - total flux cleaned = 0.000737938 Jy ! Component: 150 - total flux cleaned = 0.00103273 Jy ! Component: 200 - total flux cleaned = 0.00115769 Jy ! Total flux subtracted in 200 components = 0.00115769 Jy ! Clean residual min=-0.001690 max=0.001649 Jy/beam ! Clean residual mean=-0.000005 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0539817 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.0539817 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.525 mas, bmaj=9.052 mas, bpa=-1.047 degrees ! Estimated noise=824.073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269562 Jy ! Component: 100 - total flux cleaned = 0.000405638 Jy ! Component: 150 - total flux cleaned = 0.000545097 Jy ! Component: 200 - total flux cleaned = 0.000664579 Jy ! Total flux subtracted in 200 components = 0.000664579 Jy ! Clean residual min=-0.001834 max=0.001918 Jy/beam ! Clean residual mean=-0.000011 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0546463 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103234 Jy ! Component: 100 - total flux cleaned = 0.00017845 Jy ! Component: 150 - total flux cleaned = 0.000245038 Jy ! Component: 200 - total flux cleaned = 0.000315425 Jy ! Total flux subtracted in 200 components = 0.000315425 Jy ! Clean residual min=-0.001781 max=0.001921 Jy/beam ! Clean residual mean=-0.000010 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.0549617 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 51 components and 0.0549617 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=5.719 mas, bpa=-4.735 degrees ! Estimated noise=652.079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000529954 Jy ! Component: 100 - total flux cleaned = -0.000641193 Jy ! Component: 150 - total flux cleaned = -0.000710581 Jy ! Component: 200 - total flux cleaned = -0.00075071 Jy ! Total flux subtracted in 200 components = -0.00075071 Jy ! Clean residual min=-0.001570 max=0.001672 Jy/beam ! Clean residual mean=-0.000004 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.054211 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.054211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070832Jy sigma=0.000646 ! Fit after self-cal, rms=0.070828Jy sigma=0.000646 wmodel J1356+4831_S_2017_08_05_pus_map.mod ! Writing 68 model components to file: J1356+4831_S_2017_08_05_pus_map.mod wobs J1356+4831_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1356+4831_S_2017_08_05_pus_uvs.fits wwins J1356+4831_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1356+4831_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395571 Jy ! Component: 100 - total flux cleaned = 0.000664888 Jy ! Component: 150 - total flux cleaned = 0.000842142 Jy ! Component: 200 - total flux cleaned = 0.00106125 Jy ! Component: 250 - total flux cleaned = 0.0013203 Jy ! Component: 300 - total flux cleaned = 0.0015262 Jy ! Component: 350 - total flux cleaned = 0.00179424 Jy ! Component: 400 - total flux cleaned = 0.00203443 Jy ! Component: 450 - total flux cleaned = 0.00224811 Jy ! Component: 500 - total flux cleaned = 0.0024358 Jy ! Component: 550 - total flux cleaned = 0.00259993 Jy ! Component: 600 - total flux cleaned = 0.00270067 Jy ! Component: 650 - total flux cleaned = 0.00278026 Jy ! Component: 700 - total flux cleaned = 0.00291706 Jy ! Component: 750 - total flux cleaned = 0.00297454 Jy ! Component: 800 - total flux cleaned = 0.00306909 Jy ! Component: 850 - total flux cleaned = 0.00310628 Jy ! Component: 900 - total flux cleaned = 0.0032348 Jy ! Component: 950 - total flux cleaned = 0.00323489 Jy ! Component: 1000 - total flux cleaned = 0.00334239 Jy ! Component: 1050 - total flux cleaned = 0.00336016 Jy ! Component: 1100 - total flux cleaned = 0.00339524 Jy ! Component: 1150 - total flux cleaned = 0.00341273 Jy ! Component: 1200 - total flux cleaned = 0.00342969 Jy ! Component: 1250 - total flux cleaned = 0.00346371 Jy ! Component: 1300 - total flux cleaned = 0.00349731 Jy ! Component: 1350 - total flux cleaned = 0.00354675 Jy ! Component: 1400 - total flux cleaned = 0.00354675 Jy ! Component: 1450 - total flux cleaned = 0.00357926 Jy ! Component: 1500 - total flux cleaned = 0.00359521 Jy ! Component: 1550 - total flux cleaned = 0.00362703 Jy ! Component: 1600 - total flux cleaned = 0.00365858 Jy ! Component: 1650 - total flux cleaned = 0.00370489 Jy ! Component: 1700 - total flux cleaned = 0.00368945 Jy ! Component: 1750 - total flux cleaned = 0.00370481 Jy ! Component: 1800 - total flux cleaned = 0.00375027 Jy ! Component: 1850 - total flux cleaned = 0.00378027 Jy ! Component: 1900 - total flux cleaned = 0.00379523 Jy ! Component: 1950 - total flux cleaned = 0.00383933 Jy ! Component: 2000 - total flux cleaned = 0.00386871 Jy ! Component: 2050 - total flux cleaned = 0.0038974 Jy ! Component: 2100 - total flux cleaned = 0.00394035 Jy ! Component: 2150 - total flux cleaned = 0.00398282 Jy ! Component: 2200 - total flux cleaned = 0.00396876 Jy ! Component: 2250 - total flux cleaned = 0.00402463 Jy ! Component: 2300 - total flux cleaned = 0.00412206 Jy ! Component: 2350 - total flux cleaned = 0.00417715 Jy ! Component: 2400 - total flux cleaned = 0.00419081 Jy ! Component: 2450 - total flux cleaned = 0.0041909 Jy ! Component: 2500 - total flux cleaned = 0.00428539 Jy ! Component: 2550 - total flux cleaned = 0.00429859 Jy ! Component: 2600 - total flux cleaned = 0.00429858 Jy ! Component: 2650 - total flux cleaned = 0.00433825 Jy ! Component: 2700 - total flux cleaned = 0.00439084 Jy ! Component: 2750 - total flux cleaned = 0.00442986 Jy ! Component: 2800 - total flux cleaned = 0.00450742 Jy ! Component: 2850 - total flux cleaned = 0.00452028 Jy ! Component: 2900 - total flux cleaned = 0.00449478 Jy ! Component: 2950 - total flux cleaned = 0.00452009 Jy ! Component: 3000 - total flux cleaned = 0.00459525 Jy ! Component: 3050 - total flux cleaned = 0.00459518 Jy ! Component: 3100 - total flux cleaned = 0.00454575 Jy ! Component: 3150 - total flux cleaned = 0.00459507 Jy ! Component: 3200 - total flux cleaned = 0.0046195 Jy ! Component: 3250 - total flux cleaned = 0.00468017 Jy ! Component: 3300 - total flux cleaned = 0.0046319 Jy ! Component: 3350 - total flux cleaned = 0.00460798 Jy ! Component: 3400 - total flux cleaned = 0.0046794 Jy ! Component: 3450 - total flux cleaned = 0.00466746 Jy ! Component: 3500 - total flux cleaned = 0.00465571 Jy ! Component: 3550 - total flux cleaned = 0.0046791 Jy ! Component: 3600 - total flux cleaned = 0.00466748 Jy ! Component: 3650 - total flux cleaned = 0.00463284 Jy ! Component: 3700 - total flux cleaned = 0.00469032 Jy ! Component: 3750 - total flux cleaned = 0.00465613 Jy ! Component: 3800 - total flux cleaned = 0.00466743 Jy ! Component: 3850 - total flux cleaned = 0.00462226 Jy ! Component: 3900 - total flux cleaned = 0.00472333 Jy ! Component: 3950 - total flux cleaned = 0.00471213 Jy ! Component: 4000 - total flux cleaned = 0.00468981 Jy ! Component: 4050 - total flux cleaned = 0.00468986 Jy ! Total flux subtracted in 4096 components = 0.00464584 Jy ! Clean residual min=-0.000556 max=0.000660 Jy/beam ! Clean residual mean=-0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0588569 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 387 components and 0.0588569 Jy ![Exited script file: muppet] wmap "J1356+4831_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 5.719 at -4.735 degrees (North through East) ! Clean map min=-0.001985 max=0.050794 Jy/beam ! Writing clean map to FITS file: J1356+4831_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0507939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201772 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19171 1.19171 2.38342 4.76685 9.53369 19.0674 38.1348 76.2695 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 5.719 at -4.735 degrees (North through East) ! Clean map min=-0.001985 max=0.050794 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1356+4831_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:30:18 2019