! Started logfile: J1353+0151_S_2017_07_09_pus_uvs.log on Wed May 8 14:49:52 2019 obs J1353+0151_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1353+0151_S_2017_07_09_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.900295 visibilities/baseline/integration-bin. ! Found source: J1353+0151 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 18312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1353+0151_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 639 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942123Jy sigma=0.008562 ! Fit after self-cal, rms=0.928886Jy sigma=0.008451 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=6.808 mas, bpa=-3.217 degrees ! Estimated noise=821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533939 Jy ! Component: 100 - total flux cleaned = 0.0743309 Jy ! Total flux subtracted in 100 components = 0.0743309 Jy ! Clean residual min=-0.007424 max=0.015905 Jy/beam ! Clean residual mean=0.000027 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.0743309 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0743309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089388Jy sigma=0.000792 ! Fit after self-cal, rms=0.089035Jy sigma=0.000789 ! Inverting map ! Added new window around map position (-3.5, -10.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164775 Jy ! Component: 100 - total flux cleaned = 0.0271603 Jy ! Total flux subtracted in 100 components = 0.0271603 Jy ! Clean residual min=-0.005778 max=0.008648 Jy/beam ! Clean residual mean=0.000015 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.101491 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 44 components and 0.101491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084541Jy sigma=0.000742 ! Fit after self-cal, rms=0.084203Jy sigma=0.000740 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00944492 Jy ! Component: 100 - total flux cleaned = 0.0162075 Jy ! Total flux subtracted in 100 components = 0.0162075 Jy ! Clean residual min=-0.004952 max=0.006903 Jy/beam ! Clean residual mean=0.000009 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.117699 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 69 components and 0.117699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082487Jy sigma=0.000721 ! Fit after self-cal, rms=0.082378Jy sigma=0.000721 ! Inverting map ! Added new window around map position (-11.5, -18.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771452 Jy ! Component: 100 - total flux cleaned = 0.0130329 Jy ! Total flux subtracted in 100 components = 0.0130329 Jy ! Clean residual min=-0.004359 max=0.005357 Jy/beam ! Clean residual mean=0.000007 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.130732 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 86 components and 0.130731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081291Jy sigma=0.000709 ! Fit after self-cal, rms=0.081160Jy sigma=0.000708 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=7.801 mas, bpa=-2.557 degrees ! Estimated noise=656.075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863487 Jy ! Component: 100 - total flux cleaned = 0.0143696 Jy ! Component: 150 - total flux cleaned = 0.0187119 Jy ! Component: 200 - total flux cleaned = 0.0221142 Jy ! Total flux subtracted in 200 components = 0.0221142 Jy ! Clean residual min=-0.003538 max=0.005259 Jy/beam ! Clean residual mean=0.000009 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.152846 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 153 components and 0.152846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080061Jy sigma=0.000697 ! Fit after self-cal, rms=0.079903Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.84 HN 1.18 KP 1.04 ! LA 1.03 MK 0.95 NL 0.99 OV 1.02 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.91 HN 1.04 KP 0.98 ! LA 1.03 MK 0.99 NL 1.00 OV 1.02 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.01 KP 0.99 ! LA 1.02 MK 1.11 NL 1.15 OV 0.94 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.85 KP 1.00* ! LA 0.95 MK 0.84 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.079903Jy sigma=0.000695 ! Fit after self-cal, rms=0.081211Jy sigma=0.000690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.954 mas, bpa=-2.912 degrees ! Estimated noise=656.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182171 Jy ! Component: 100 - total flux cleaned = 0.00245881 Jy ! Component: 150 - total flux cleaned = 0.00299145 Jy ! Component: 200 - total flux cleaned = 0.0031164 Jy ! Total flux subtracted in 200 components = 0.0031164 Jy ! Clean residual min=-0.002935 max=0.002979 Jy/beam ! Clean residual mean=-0.000002 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.155962 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 170 components and 0.155962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081121Jy sigma=0.000689 ! Fit after self-cal, rms=0.081223Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081223Jy sigma=0.000688 ! Fit after self-cal, rms=0.083978Jy sigma=0.000685 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=7.953 mas, bpa=-2.917 degrees ! Estimated noise=664.165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014889 Jy ! Component: 100 - total flux cleaned = 0.00188547 Jy ! Component: 150 - total flux cleaned = 0.00198496 Jy ! Component: 200 - total flux cleaned = 0.00204357 Jy ! Total flux subtracted in 200 components = 0.00204357 Jy ! Clean residual min=-0.002528 max=0.002888 Jy/beam ! Clean residual mean=0.000001 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.158006 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 182 components and 0.158006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083939Jy sigma=0.000684 ! Fit after self-cal, rms=0.084019Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002946 Jy ! Component: 100 - total flux cleaned = 0.00392696 Jy ! Component: 150 - total flux cleaned = 0.00392651 Jy ! Component: 200 - total flux cleaned = 0.00408475 Jy ! Total flux subtracted in 200 components = 0.00408475 Jy ! Clean residual min=-0.002457 max=0.002436 Jy/beam ! Clean residual mean=0.000002 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.16209 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 216 components and 0.16209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083909Jy sigma=0.000683 ! Fit after self-cal, rms=0.083876Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083876Jy sigma=0.000683 ! Fit after self-cal, rms=0.085437Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.949 mas, bpa=-2.953 degrees ! Estimated noise=660.099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161012 Jy ! Component: 100 - total flux cleaned = 0.00203121 Jy ! Component: 150 - total flux cleaned = 0.00213457 Jy ! Component: 200 - total flux cleaned = 0.00219609 Jy ! Total flux subtracted in 200 components = 0.00219609 Jy ! Clean residual min=-0.002129 max=0.002312 Jy/beam ! Clean residual mean=0.000004 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.164287 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 246 components and 0.164286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085396Jy sigma=0.000681 ! Fit after self-cal, rms=0.085416Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-49.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002271 Jy ! Component: 100 - total flux cleaned = 0.00327411 Jy ! Component: 150 - total flux cleaned = 0.00352119 Jy ! Component: 200 - total flux cleaned = 0.00367656 Jy ! Total flux subtracted in 200 components = 0.00367656 Jy ! Clean residual min=-0.002095 max=0.001918 Jy/beam ! Clean residual mean=0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.167963 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 277 components and 0.167963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085352Jy sigma=0.000681 ! Fit after self-cal, rms=0.085335Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085335Jy sigma=0.000681 ! Fit after self-cal, rms=0.085728Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.437 mas, bmaj=12.64 mas, bpa=-3.24 degrees ! Estimated noise=828.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170472 Jy ! Component: 100 - total flux cleaned = 0.00244608 Jy ! Component: 150 - total flux cleaned = 0.00263279 Jy ! Component: 200 - total flux cleaned = 0.00273687 Jy ! Total flux subtracted in 200 components = 0.00273687 Jy ! Clean residual min=-0.002257 max=0.002425 Jy/beam ! Clean residual mean=0.000002 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.1707 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 304 components and 0.1707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085712Jy sigma=0.000680 ! Fit after self-cal, rms=0.085703Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.5, -85.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232248 Jy ! Component: 100 - total flux cleaned = 0.00324903 Jy ! Component: 150 - total flux cleaned = 0.00350385 Jy ! Component: 200 - total flux cleaned = 0.00376305 Jy ! Total flux subtracted in 200 components = 0.00376305 Jy ! Clean residual min=-0.001816 max=0.001636 Jy/beam ! Clean residual mean=0.000007 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.174463 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 344 components and 0.174463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085660Jy sigma=0.000680 ! Fit after self-cal, rms=0.085657Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=7.946 mas, bpa=-2.993 degrees ! Estimated noise=658.378 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.205 x 7.946 at -2.993 degrees (North through East) ! Clean map min=-0.0017438 max=0.065893 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=6.935 mas, bpa=-3.667 degrees ! Estimated noise=827.882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05336 Jy ! Component: 100 - total flux cleaned = 0.0779443 Jy ! Component: 150 - total flux cleaned = 0.0936344 Jy ! Component: 200 - total flux cleaned = 0.105199 Jy ! Total flux subtracted in 200 components = 0.105199 Jy ! Clean residual min=-0.004670 max=0.006839 Jy/beam ! Clean residual mean=0.000013 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.105199 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.105199 Jy ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=7.946 mas, bpa=-2.993 degrees ! Estimated noise=658.378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142343 Jy ! Component: 100 - total flux cleaned = 0.0244188 Jy ! Component: 150 - total flux cleaned = 0.0320886 Jy ! Component: 200 - total flux cleaned = 0.0379916 Jy ! Total flux subtracted in 200 components = 0.0379916 Jy ! Clean residual min=-0.003539 max=0.003494 Jy/beam ! Clean residual mean=0.000013 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.14319 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 126 components and 0.14319 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.437 mas, bmaj=12.64 mas, bpa=-3.24 degrees ! Estimated noise=828.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789391 Jy ! Component: 100 - total flux cleaned = 0.0131249 Jy ! Component: 150 - total flux cleaned = 0.0170871 Jy ! Component: 200 - total flux cleaned = 0.0201675 Jy ! Total flux subtracted in 200 components = 0.0201675 Jy ! Clean residual min=-0.002606 max=0.002761 Jy/beam ! Clean residual mean=0.000009 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.163358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249704 Jy ! Component: 100 - total flux cleaned = 0.00439629 Jy ! Component: 150 - total flux cleaned = 0.00544001 Jy ! Component: 200 - total flux cleaned = 0.0062333 Jy ! Total flux subtracted in 200 components = 0.0062333 Jy ! Clean residual min=-0.002136 max=0.001889 Jy/beam ! Clean residual mean=0.000008 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.169591 Jy ! Adding 124 model components to the UV plane model. ! The established model now contains 235 components and 0.169591 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=7.946 mas, bpa=-2.993 degrees ! Estimated noise=658.378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102705 Jy ! Component: 100 - total flux cleaned = 0.00180269 Jy ! Component: 150 - total flux cleaned = 0.00224745 Jy ! Component: 200 - total flux cleaned = 0.00245104 Jy ! Total flux subtracted in 200 components = 0.00245104 Jy ! Clean residual min=-0.001896 max=0.001716 Jy/beam ! Clean residual mean=0.000003 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.172042 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 265 components and 0.172042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085724Jy sigma=0.000680 ! Fit after self-cal, rms=0.085711Jy sigma=0.000680 wmodel J1353+0151_S_2017_07_09_pus_map.mod ! Writing 265 model components to file: J1353+0151_S_2017_07_09_pus_map.mod wobs J1353+0151_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1353+0151_S_2017_07_09_pus_uvs.fits wwins J1353+0151_S_2017_07_09_pus_map.win ! wwins: Wrote 7 windows to J1353+0151_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00043567 Jy ! Component: 100 - total flux cleaned = -0.000611527 Jy ! Component: 150 - total flux cleaned = -0.000830956 Jy ! Component: 200 - total flux cleaned = -0.000857148 Jy ! Component: 250 - total flux cleaned = -0.00088317 Jy ! Component: 300 - total flux cleaned = -0.000908184 Jy ! Component: 350 - total flux cleaned = -0.000834714 Jy ! Component: 400 - total flux cleaned = -0.000739974 Jy ! Component: 450 - total flux cleaned = -0.00076294 Jy ! Component: 500 - total flux cleaned = -0.000717205 Jy ! Component: 550 - total flux cleaned = -0.000694433 Jy ! Component: 600 - total flux cleaned = -0.00071623 Jy ! Component: 650 - total flux cleaned = -0.000694639 Jy ! Component: 700 - total flux cleaned = -0.000715695 Jy ! Component: 750 - total flux cleaned = -0.000715666 Jy ! Component: 800 - total flux cleaned = -0.000777301 Jy ! Component: 850 - total flux cleaned = -0.00075688 Jy ! Component: 900 - total flux cleaned = -0.000756963 Jy ! Component: 950 - total flux cleaned = -0.000737465 Jy ! Component: 1000 - total flux cleaned = -0.000679553 Jy ! Component: 1050 - total flux cleaned = -0.000756441 Jy ! Component: 1100 - total flux cleaned = -0.000737101 Jy ! Component: 1150 - total flux cleaned = -0.000699504 Jy ! Component: 1200 - total flux cleaned = -0.000662512 Jy ! Component: 1250 - total flux cleaned = -0.000626039 Jy ! Component: 1300 - total flux cleaned = -0.000590002 Jy ! Component: 1350 - total flux cleaned = -0.000554027 Jy ! Component: 1400 - total flux cleaned = -0.00051865 Jy ! Component: 1450 - total flux cleaned = -0.000483737 Jy ! Component: 1500 - total flux cleaned = -0.00043191 Jy ! Component: 1550 - total flux cleaned = -0.000397714 Jy ! Component: 1600 - total flux cleaned = -0.000279218 Jy ! Component: 1650 - total flux cleaned = -0.000279032 Jy ! Component: 1700 - total flux cleaned = -0.000229105 Jy ! Component: 1750 - total flux cleaned = -0.000113771 Jy ! Component: 1800 - total flux cleaned = -6.50152e-05 Jy ! Component: 1850 - total flux cleaned = -3.26774e-05 Jy ! Component: 1900 - total flux cleaned = 3.1129e-05 Jy ! Component: 1950 - total flux cleaned = 0.00011018 Jy ! Component: 2000 - total flux cleaned = 0.000157186 Jy ! Component: 2050 - total flux cleaned = 0.000157067 Jy ! Component: 2100 - total flux cleaned = 0.000141762 Jy ! Component: 2150 - total flux cleaned = 0.000172578 Jy ! Component: 2200 - total flux cleaned = 0.000263575 Jy ! Component: 2250 - total flux cleaned = 0.000293695 Jy ! Component: 2300 - total flux cleaned = 0.000293678 Jy ! Component: 2350 - total flux cleaned = 0.000293738 Jy ! Component: 2400 - total flux cleaned = 0.000279136 Jy ! Component: 2450 - total flux cleaned = 0.000337688 Jy ! Component: 2500 - total flux cleaned = 0.000366707 Jy ! Component: 2550 - total flux cleaned = 0.000395532 Jy ! Component: 2600 - total flux cleaned = 0.000409674 Jy ! Component: 2650 - total flux cleaned = 0.000437992 Jy ! Component: 2700 - total flux cleaned = 0.000494135 Jy ! Component: 2750 - total flux cleaned = 0.000494217 Jy ! Component: 2800 - total flux cleaned = 0.000549645 Jy ! Component: 2850 - total flux cleaned = 0.000604596 Jy ! Component: 2900 - total flux cleaned = 0.000631835 Jy ! Component: 2950 - total flux cleaned = 0.000699533 Jy ! Component: 3000 - total flux cleaned = 0.000659205 Jy ! Component: 3050 - total flux cleaned = 0.000725906 Jy ! Component: 3100 - total flux cleaned = 0.000765535 Jy ! Component: 3150 - total flux cleaned = 0.000726236 Jy ! Component: 3200 - total flux cleaned = 0.000791439 Jy ! Component: 3250 - total flux cleaned = 0.000817544 Jy ! Component: 3300 - total flux cleaned = 0.000933556 Jy ! Component: 3350 - total flux cleaned = 0.000933392 Jy ! Component: 3400 - total flux cleaned = 0.00097168 Jy ! Component: 3450 - total flux cleaned = 0.000971596 Jy ! Component: 3500 - total flux cleaned = 0.000971593 Jy ! Component: 3550 - total flux cleaned = 0.00103406 Jy ! Component: 3600 - total flux cleaned = 0.00112087 Jy ! Component: 3650 - total flux cleaned = 0.00112085 Jy ! Component: 3700 - total flux cleaned = 0.00116977 Jy ! Component: 3750 - total flux cleaned = 0.00118202 Jy ! Component: 3800 - total flux cleaned = 0.00123038 Jy ! Component: 3850 - total flux cleaned = 0.00123031 Jy ! Component: 3900 - total flux cleaned = 0.00124246 Jy ! Component: 3950 - total flux cleaned = 0.00133772 Jy ! Component: 4000 - total flux cleaned = 0.00137324 Jy ! Component: 4050 - total flux cleaned = 0.00139679 Jy ! Total flux subtracted in 4096 components = 0.00142023 Jy ! Clean residual min=-0.000612 max=0.000690 Jy/beam ! Clean residual mean=0.000001 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.173462 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 536 components and 0.173462 Jy ![Exited script file: muppet] wmap "J1353+0151_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.205 x 7.946 at -2.993 degrees (North through East) ! Clean map min=-0.0015447 max=0.066113 Jy/beam ! Writing clean map to FITS file: J1353+0151_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0661128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213366 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.968191 0.968191 1.93638 3.87277 7.74553 15.4911 30.9821 61.9642 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.205 x 7.946 at -2.993 degrees (North through East) ! Clean map min=-0.0015447 max=0.066113 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1353+0151_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:49:57 2019