! Started logfile: J1350-1634_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:42:47 2019 obs J1350-1634_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1350-1634_S_2017_03_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.803395 visibilities/baseline/integration-bin. ! Found source: J1350-1634 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 20824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1350-1634_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 501 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963248Jy sigma=0.006969 ! Fit after self-cal, rms=0.932984Jy sigma=0.006807 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=6.185 mas, bpa=-1.292 degrees ! Estimated noise=1178.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523528 Jy ! Component: 100 - total flux cleaned = 0.066592 Jy ! Total flux subtracted in 100 components = 0.066592 Jy ! Clean residual min=-0.004757 max=0.006843 Jy/beam ! Clean residual mean=-0.000006 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.0665921 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0665921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106427Jy sigma=0.000664 ! Fit after self-cal, rms=0.106215Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=7.301 mas, bpa=-0.8467 degrees ! Estimated noise=736.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114347 Jy ! Component: 100 - total flux cleaned = 0.0173072 Jy ! Component: 150 - total flux cleaned = 0.020725 Jy ! Component: 200 - total flux cleaned = 0.0228549 Jy ! Total flux subtracted in 200 components = 0.0228549 Jy ! Clean residual min=-0.002430 max=0.003113 Jy/beam ! Clean residual mean=-0.000006 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0894469 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.0894469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105005Jy sigma=0.000653 ! Fit after self-cal, rms=0.104946Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.93 HN 1.03 KP 1.03 ! LA 0.98 MK 1.47 NL 1.07 OV 1.09 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.03 KP 0.98 ! LA 0.91 MK 1.03 NL 1.06 OV 1.07 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.97 HN 1.00 KP 1.05 ! LA 0.94 MK 1.02 NL 1.01 OV 1.04 ! PT 0.96 SC 1.14 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.90 KP 1.00* ! LA 0.76 MK 0.77 NL 1.00* OV 0.82 ! PT 0.97 SC 0.75 ! ! ! Fit before self-cal, rms=0.104946Jy sigma=0.000653 ! Fit after self-cal, rms=0.098762Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=7.334 mas, bpa=-0.4781 degrees ! Estimated noise=730.178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-77.5, -106). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260966 Jy ! Component: 100 - total flux cleaned = 0.00327291 Jy ! Component: 150 - total flux cleaned = 0.00338413 Jy ! Component: 200 - total flux cleaned = 0.00338442 Jy ! Total flux subtracted in 200 components = 0.00338442 Jy ! Clean residual min=-0.001995 max=0.002117 Jy/beam ! Clean residual mean=-0.000000 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0928314 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 62 components and 0.0928314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098668Jy sigma=0.000649 ! Fit after self-cal, rms=0.098621Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098621Jy sigma=0.000649 ! Fit after self-cal, rms=0.099172Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.391 mas, bpa=-0.4242 degrees ! Estimated noise=731.725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137268 Jy ! Component: 100 - total flux cleaned = 0.00169662 Jy ! Component: 150 - total flux cleaned = 0.00173691 Jy ! Component: 200 - total flux cleaned = 0.00180702 Jy ! Total flux subtracted in 200 components = 0.00180702 Jy ! Clean residual min=-0.001873 max=0.001822 Jy/beam ! Clean residual mean=0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0946384 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 0.0946384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099132Jy sigma=0.000647 ! Fit after self-cal, rms=0.099146Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475375 Jy ! Component: 100 - total flux cleaned = 0.000545689 Jy ! Component: 150 - total flux cleaned = 0.000578499 Jy ! Component: 200 - total flux cleaned = 0.00057837 Jy ! Total flux subtracted in 200 components = 0.00057837 Jy ! Clean residual min=-0.001789 max=0.001701 Jy/beam ! Clean residual mean=0.000001 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0952167 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.0952167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099125Jy sigma=0.000647 ! Fit after self-cal, rms=0.099121Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099121Jy sigma=0.000647 ! Fit after self-cal, rms=0.098445Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.366 mas, bpa=-0.525 degrees ! Estimated noise=728.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581858 Jy ! Component: 100 - total flux cleaned = 0.000678708 Jy ! Component: 150 - total flux cleaned = 0.000679324 Jy ! Component: 200 - total flux cleaned = 0.000627421 Jy ! Total flux subtracted in 200 components = 0.000627421 Jy ! Clean residual min=-0.001695 max=0.001574 Jy/beam ! Clean residual mean=0.000002 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0958442 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 108 components and 0.0958441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098429Jy sigma=0.000646 ! Fit after self-cal, rms=0.098434Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135913 Jy ! Component: 100 - total flux cleaned = 0.000136023 Jy ! Component: 150 - total flux cleaned = 8.71787e-05 Jy ! Component: 200 - total flux cleaned = 8.79009e-05 Jy ! Total flux subtracted in 200 components = 8.79009e-05 Jy ! Clean residual min=-0.001691 max=0.001556 Jy/beam ! Clean residual mean=0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.095932 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 116 components and 0.095932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098422Jy sigma=0.000646 ! Fit after self-cal, rms=0.098421Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098421Jy sigma=0.000646 ! Fit after self-cal, rms=0.098114Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=14.97 mas, bpa=5.77 degrees ! Estimated noise=910.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626636 Jy ! Component: 100 - total flux cleaned = 0.000582198 Jy ! Component: 150 - total flux cleaned = 0.000516309 Jy ! Component: 200 - total flux cleaned = 0.000479806 Jy ! Total flux subtracted in 200 components = 0.000479806 Jy ! Clean residual min=-0.001969 max=0.001644 Jy/beam ! Clean residual mean=0.000005 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0964118 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 130 components and 0.0964118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098114Jy sigma=0.000646 ! Fit after self-cal, rms=0.098120Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127698 Jy ! Component: 100 - total flux cleaned = 5.51713e-05 Jy ! Component: 150 - total flux cleaned = -1.05508e-05 Jy ! Component: 200 - total flux cleaned = -4.07537e-05 Jy ! Total flux subtracted in 200 components = -4.07537e-05 Jy ! Clean residual min=-0.001955 max=0.001655 Jy/beam ! Clean residual mean=0.000005 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0963711 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 134 components and 0.0963711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098119Jy sigma=0.000646 ! Fit after self-cal, rms=0.098119Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.35 mas, bpa=-0.7144 degrees ! Estimated noise=725.776 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.35 at -0.7144 degrees (North through East) ! Clean map min=-0.0018432 max=0.066735 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=6.184 mas, bpa=-1.547 degrees ! Estimated noise=1145.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504602 Jy ! Component: 100 - total flux cleaned = 0.0659744 Jy ! Component: 150 - total flux cleaned = 0.0751377 Jy ! Component: 200 - total flux cleaned = 0.0815231 Jy ! Total flux subtracted in 200 components = 0.0815231 Jy ! Clean residual min=-0.003875 max=0.004362 Jy/beam ! Clean residual mean=-0.000002 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.0815231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0815231 Jy ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.35 mas, bpa=-0.7144 degrees ! Estimated noise=725.776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605843 Jy ! Component: 100 - total flux cleaned = 0.00953483 Jy ! Component: 150 - total flux cleaned = 0.0119692 Jy ! Component: 200 - total flux cleaned = 0.0132559 Jy ! Total flux subtracted in 200 components = 0.0132559 Jy ! Clean residual min=-0.001881 max=0.001848 Jy/beam ! Clean residual mean=-0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.094779 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 62 components and 0.094779 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=14.97 mas, bpa=5.77 degrees ! Estimated noise=910.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192039 Jy ! Component: 100 - total flux cleaned = 0.00216345 Jy ! Component: 150 - total flux cleaned = 0.00224298 Jy ! Component: 200 - total flux cleaned = 0.00224173 Jy ! Total flux subtracted in 200 components = 0.00224173 Jy ! Clean residual min=-0.002177 max=0.001784 Jy/beam ! Clean residual mean=0.000004 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0970207 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.93638e-05 Jy ! Component: 100 - total flux cleaned = -0.000137871 Jy ! Component: 150 - total flux cleaned = -0.000185725 Jy ! Component: 200 - total flux cleaned = -0.000251186 Jy ! Total flux subtracted in 200 components = -0.000251186 Jy ! Clean residual min=-0.002091 max=0.001706 Jy/beam ! Clean residual mean=0.000004 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0967695 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 93 components and 0.0967695 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.35 mas, bpa=-0.7144 degrees ! Estimated noise=725.776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292316 Jy ! Component: 100 - total flux cleaned = -0.000334038 Jy ! Component: 150 - total flux cleaned = -0.000372981 Jy ! Component: 200 - total flux cleaned = -0.000373628 Jy ! Total flux subtracted in 200 components = -0.000373628 Jy ! Clean residual min=-0.001690 max=0.001652 Jy/beam ! Clean residual mean=0.000002 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0963959 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.0963959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098148Jy sigma=0.000646 ! Fit after self-cal, rms=0.098151Jy sigma=0.000646 wmodel J1350-1634_S_2017_03_27_pus_map.mod ! Writing 108 model components to file: J1350-1634_S_2017_03_27_pus_map.mod wobs J1350-1634_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1350-1634_S_2017_03_27_pus_uvs.fits wwins J1350-1634_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1350-1634_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314576 Jy ! Component: 100 - total flux cleaned = -0.000344756 Jy ! Component: 150 - total flux cleaned = -0.000288571 Jy ! Component: 200 - total flux cleaned = -0.000314928 Jy ! Component: 250 - total flux cleaned = -0.000288105 Jy ! Component: 300 - total flux cleaned = -0.000236594 Jy ! Component: 350 - total flux cleaned = -0.000186136 Jy ! Component: 400 - total flux cleaned = -0.000112317 Jy ! Component: 450 - total flux cleaned = -0.000160864 Jy ! Component: 500 - total flux cleaned = -0.000207613 Jy ! Component: 550 - total flux cleaned = -0.000184373 Jy ! Component: 600 - total flux cleaned = -0.000161986 Jy ! Component: 650 - total flux cleaned = -0.000184594 Jy ! Component: 700 - total flux cleaned = -0.000184541 Jy ! Component: 750 - total flux cleaned = -0.00014171 Jy ! Component: 800 - total flux cleaned = -0.000184066 Jy ! Component: 850 - total flux cleaned = -0.000225657 Jy ! Component: 900 - total flux cleaned = -0.000184748 Jy ! Component: 950 - total flux cleaned = -0.000286384 Jy ! Component: 1000 - total flux cleaned = -0.000306484 Jy ! Component: 1050 - total flux cleaned = -0.00040517 Jy ! Component: 1100 - total flux cleaned = -0.000443933 Jy ! Component: 1150 - total flux cleaned = -0.000539838 Jy ! Component: 1200 - total flux cleaned = -0.000520915 Jy ! Component: 1250 - total flux cleaned = -0.000577094 Jy ! Component: 1300 - total flux cleaned = -0.000577344 Jy ! Component: 1350 - total flux cleaned = -0.000650155 Jy ! Component: 1400 - total flux cleaned = -0.000632175 Jy ! Component: 1450 - total flux cleaned = -0.000649738 Jy ! Component: 1500 - total flux cleaned = -0.000597096 Jy ! Component: 1550 - total flux cleaned = -0.000649809 Jy ! Component: 1600 - total flux cleaned = -0.000597949 Jy ! Component: 1650 - total flux cleaned = -0.000632239 Jy ! Component: 1700 - total flux cleaned = -0.00056461 Jy ! Component: 1750 - total flux cleaned = -0.000564726 Jy ! Component: 1800 - total flux cleaned = -0.000498284 Jy ! Component: 1850 - total flux cleaned = -0.000448852 Jy ! Component: 1900 - total flux cleaned = -0.000383514 Jy ! Component: 1950 - total flux cleaned = -0.000335168 Jy ! Component: 2000 - total flux cleaned = -0.00023924 Jy ! Component: 2050 - total flux cleaned = -0.000144195 Jy ! Component: 2100 - total flux cleaned = -0.00014434 Jy ! Component: 2150 - total flux cleaned = -9.73257e-05 Jy ! Component: 2200 - total flux cleaned = -2.01202e-05 Jy ! Component: 2250 - total flux cleaned = 4.10656e-05 Jy ! Component: 2300 - total flux cleaned = 4.11927e-05 Jy ! Component: 2350 - total flux cleaned = 0.000101474 Jy ! Component: 2400 - total flux cleaned = 0.000146392 Jy ! Component: 2450 - total flux cleaned = 0.000235238 Jy ! Component: 2500 - total flux cleaned = 0.000279274 Jy ! Component: 2550 - total flux cleaned = 0.000308258 Jy ! Component: 2600 - total flux cleaned = 0.000279326 Jy ! Component: 2650 - total flux cleaned = 0.000322531 Jy ! Component: 2700 - total flux cleaned = 0.000393849 Jy ! Component: 2750 - total flux cleaned = 0.000379527 Jy ! Component: 2800 - total flux cleaned = 0.000435574 Jy ! Component: 2850 - total flux cleaned = 0.000435386 Jy ! Component: 2900 - total flux cleaned = 0.000421369 Jy ! Component: 2950 - total flux cleaned = 0.00049005 Jy ! Component: 3000 - total flux cleaned = 0.000449174 Jy ! Component: 3050 - total flux cleaned = 0.000449251 Jy ! Component: 3100 - total flux cleaned = 0.000462754 Jy ! Component: 3150 - total flux cleaned = 0.00051627 Jy ! Component: 3200 - total flux cleaned = 0.000516343 Jy ! Component: 3250 - total flux cleaned = 0.000529574 Jy ! Component: 3300 - total flux cleaned = 0.000568672 Jy ! Component: 3350 - total flux cleaned = 0.000555749 Jy ! Component: 3400 - total flux cleaned = 0.000581531 Jy ! Component: 3450 - total flux cleaned = 0.000555758 Jy ! Component: 3500 - total flux cleaned = 0.000581281 Jy ! Component: 3550 - total flux cleaned = 0.000581151 Jy ! Component: 3600 - total flux cleaned = 0.0005182 Jy ! Component: 3650 - total flux cleaned = 0.000580682 Jy ! Component: 3700 - total flux cleaned = 0.000617977 Jy ! Component: 3750 - total flux cleaned = 0.000593093 Jy ! Component: 3800 - total flux cleaned = 0.000605405 Jy ! Component: 3850 - total flux cleaned = 0.000641934 Jy ! Component: 3900 - total flux cleaned = 0.000641969 Jy ! Component: 3950 - total flux cleaned = 0.000665966 Jy ! Component: 4000 - total flux cleaned = 0.000641935 Jy ! Component: 4050 - total flux cleaned = 0.000701418 Jy ! Total flux subtracted in 4096 components = 0.000689568 Jy ! Clean residual min=-0.000809 max=0.000645 Jy/beam ! Clean residual mean=0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0970855 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 386 components and 0.0970854 Jy ![Exited script file: muppet] wmap "J1350-1634_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.35 at -0.7144 degrees (North through East) ! Clean map min=-0.0014779 max=0.065666 Jy/beam ! Writing clean map to FITS file: J1350-1634_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0656663 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214157 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.978387 0.978387 1.95677 3.91355 7.82709 15.6542 31.3084 62.6168 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.35 at -0.7144 degrees (North through East) ! Clean map min=-0.0014779 max=0.065666 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1350-1634_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:42:52 2019