! Started logfile: J1349-3056_S_2017_10_21_pus_uvs.log on Sat May 11 20:59:11 2019 obs J1349-3056_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1349-3056_S_2017_10_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.736355 visibilities/baseline/integration-bin. ! Found source: J1349-3056 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1349-3056_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 499 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918901Jy sigma=0.006451 ! Fit after self-cal, rms=0.879640Jy sigma=0.006196 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=13.6 mas, bpa=-20.88 degrees ! Estimated noise=1645.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0941632 Jy ! Component: 100 - total flux cleaned = 0.120908 Jy ! Total flux subtracted in 100 components = 0.120908 Jy ! Clean residual min=-0.009150 max=0.011887 Jy/beam ! Clean residual mean=-0.000108 rms=0.002337 Jy/beam ! Combined flux in latest and established models = 0.120908 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.120908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116993Jy sigma=0.000743 ! Fit after self-cal, rms=0.117038Jy sigma=0.000743 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=15.97 mas, bpa=-20.93 degrees ! Estimated noise=1022.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196271 Jy ! Component: 100 - total flux cleaned = 0.0301552 Jy ! Component: 150 - total flux cleaned = 0.0360789 Jy ! Component: 200 - total flux cleaned = 0.0395093 Jy ! Total flux subtracted in 200 components = 0.0395093 Jy ! Clean residual min=-0.004190 max=0.005019 Jy/beam ! Clean residual mean=-0.000048 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.160418 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 72 components and 0.160418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113879Jy sigma=0.000718 ! Fit after self-cal, rms=0.113860Jy sigma=0.000717 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.18 KP 1.10 ! LA 1.02 MK 1.02 NL 0.91 OV 0.96 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.06 KP 1.06 ! LA 0.97 MK 1.00 NL 1.05 OV 0.96 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.08 KP 1.05 ! LA 0.76 MK 1.04 NL 1.13 OV 0.89 ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.92 KP 1.00* ! LA 0.86 MK 1.07 NL 1.00* OV 1.00* ! PT 0.94 ! ! ! Fit before self-cal, rms=0.113860Jy sigma=0.000717 ! Fit after self-cal, rms=0.112947Jy sigma=0.000710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=16.12 mas, bpa=-21.04 degrees ! Estimated noise=1019.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139379 Jy ! Component: 100 - total flux cleaned = -0.00135195 Jy ! Component: 150 - total flux cleaned = -0.00134875 Jy ! Component: 200 - total flux cleaned = -0.00134989 Jy ! Total flux subtracted in 200 components = -0.00134989 Jy ! Clean residual min=-0.002676 max=0.002895 Jy/beam ! Clean residual mean=0.000010 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.159068 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 0.159068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112892Jy sigma=0.000710 ! Fit after self-cal, rms=0.112879Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112879Jy sigma=0.000709 ! Fit after self-cal, rms=0.114109Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=16.23 mas, bpa=-21.13 degrees ! Estimated noise=1021.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000970836 Jy ! Component: 100 - total flux cleaned = -0.000969195 Jy ! Component: 150 - total flux cleaned = -0.000994665 Jy ! Component: 200 - total flux cleaned = -0.000995333 Jy ! Total flux subtracted in 200 components = -0.000995333 Jy ! Clean residual min=-0.002523 max=0.002623 Jy/beam ! Clean residual mean=0.000009 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.158073 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.158073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114088Jy sigma=0.000709 ! Fit after self-cal, rms=0.114142Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96806e-05 Jy ! Component: 100 - total flux cleaned = -4.74538e-05 Jy ! Component: 150 - total flux cleaned = -4.74567e-05 Jy ! Component: 200 - total flux cleaned = -4.80821e-05 Jy ! Total flux subtracted in 200 components = -4.80821e-05 Jy ! Clean residual min=-0.002510 max=0.002615 Jy/beam ! Clean residual mean=0.000008 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.158024 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.158024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114131Jy sigma=0.000709 ! Fit after self-cal, rms=0.114134Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114134Jy sigma=0.000709 ! Fit after self-cal, rms=0.115385Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=16.31 mas, bpa=-21.19 degrees ! Estimated noise=1022.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000671632 Jy ! Component: 100 - total flux cleaned = -0.000760684 Jy ! Component: 150 - total flux cleaned = -0.000780606 Jy ! Component: 200 - total flux cleaned = -0.000796815 Jy ! Total flux subtracted in 200 components = -0.000796815 Jy ! Clean residual min=-0.002505 max=0.002578 Jy/beam ! Clean residual mean=0.000008 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.157228 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.157228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115374Jy sigma=0.000708 ! Fit after self-cal, rms=0.115411Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.0549e-05 Jy ! Component: 100 - total flux cleaned = -2.0495e-05 Jy ! Component: 150 - total flux cleaned = -3.69523e-05 Jy ! Component: 200 - total flux cleaned = -5.14379e-05 Jy ! Total flux subtracted in 200 components = -5.14379e-05 Jy ! Clean residual min=-0.002493 max=0.002630 Jy/beam ! Clean residual mean=0.000008 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.157176 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.157176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115406Jy sigma=0.000708 ! Fit after self-cal, rms=0.115409Jy sigma=0.000708 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115409Jy sigma=0.000708 ! Fit after self-cal, rms=0.116149Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.429 mas, bmaj=32.1 mas, bpa=-9.494 degrees ! Estimated noise=1170.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354045 Jy ! Component: 100 - total flux cleaned = -0.000379961 Jy ! Component: 150 - total flux cleaned = -0.000400003 Jy ! Component: 200 - total flux cleaned = -0.000399997 Jy ! Total flux subtracted in 200 components = -0.000399997 Jy ! Clean residual min=-0.002052 max=0.002428 Jy/beam ! Clean residual mean=0.000014 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.156776 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 114 components and 0.156776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116148Jy sigma=0.000708 ! Fit after self-cal, rms=0.116163Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.68038e-05 Jy ! Component: 100 - total flux cleaned = -2.33477e-05 Jy ! Component: 150 - total flux cleaned = -2.8592e-05 Jy ! Component: 200 - total flux cleaned = -2.35386e-05 Jy ! Total flux subtracted in 200 components = -2.35386e-05 Jy ! Clean residual min=-0.002033 max=0.002432 Jy/beam ! Clean residual mean=0.000013 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.156753 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 117 components and 0.156753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116163Jy sigma=0.000708 ! Fit after self-cal, rms=0.116162Jy sigma=0.000708 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=16.35 mas, bpa=-21.23 degrees ! Estimated noise=1023.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 16.35 at -21.23 degrees (North through East) ! Clean map min=-0.0023953 max=0.12375 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.712 mas, bmaj=13.83 mas, bpa=-21.33 degrees ! Estimated noise=1678.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.094969 Jy ! Component: 100 - total flux cleaned = 0.121106 Jy ! Component: 150 - total flux cleaned = 0.134907 Jy ! Component: 200 - total flux cleaned = 0.143529 Jy ! Total flux subtracted in 200 components = 0.143529 Jy ! Clean residual min=-0.005349 max=0.005015 Jy/beam ! Clean residual mean=-0.000033 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.143529 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.143529 Jy ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=16.35 mas, bpa=-21.23 degrees ! Estimated noise=1023.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655213 Jy ! Component: 100 - total flux cleaned = 0.00995143 Jy ! Component: 150 - total flux cleaned = 0.0112253 Jy ! Component: 200 - total flux cleaned = 0.0116136 Jy ! Total flux subtracted in 200 components = 0.0116136 Jy ! Clean residual min=-0.002549 max=0.003263 Jy/beam ! Clean residual mean=0.000003 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.155143 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 72 components and 0.155143 Jy ! Inverting map ! Added new window around map position (12, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015112 Jy ! Component: 100 - total flux cleaned = 0.00123492 Jy ! Component: 150 - total flux cleaned = 0.00106608 Jy ! Component: 200 - total flux cleaned = 0.00106614 Jy ! Total flux subtracted in 200 components = 0.00106614 Jy ! Clean residual min=-0.002374 max=0.002424 Jy/beam ! Clean residual mean=0.000007 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.156209 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.156209 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.429 mas, bmaj=32.1 mas, bpa=-9.494 degrees ! Estimated noise=1170.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405559 Jy ! Component: 100 - total flux cleaned = 0.000299159 Jy ! Component: 150 - total flux cleaned = 0.000208195 Jy ! Component: 200 - total flux cleaned = 0.000158852 Jy ! Total flux subtracted in 200 components = 0.000158852 Jy ! Clean residual min=-0.002206 max=0.002349 Jy/beam ! Clean residual mean=0.000012 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.156368 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.33349e-05 Jy ! Component: 100 - total flux cleaned = -5.3503e-05 Jy ! Component: 150 - total flux cleaned = -7.2869e-05 Jy ! Component: 200 - total flux cleaned = -8.18121e-05 Jy ! Total flux subtracted in 200 components = -8.18121e-05 Jy ! Clean residual min=-0.002199 max=0.002345 Jy/beam ! Clean residual mean=0.000012 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.156286 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 134 components and 0.156286 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=16.35 mas, bpa=-21.23 degrees ! Estimated noise=1023.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.13654e-06 Jy ! Component: 100 - total flux cleaned = -0.000109587 Jy ! Component: 150 - total flux cleaned = -0.000180526 Jy ! Component: 200 - total flux cleaned = -0.000212691 Jy ! Total flux subtracted in 200 components = -0.000212691 Jy ! Clean residual min=-0.002370 max=0.002330 Jy/beam ! Clean residual mean=0.000007 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.156073 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 150 components and 0.156073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116128Jy sigma=0.000708 ! Fit after self-cal, rms=0.116106Jy sigma=0.000708 wmodel J1349-3056_S_2017_10_21_pus_map.mod ! Writing 150 model components to file: J1349-3056_S_2017_10_21_pus_map.mod wobs J1349-3056_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1349-3056_S_2017_10_21_pus_uvs.fits wwins J1349-3056_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1349-3056_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475063 Jy ! Component: 100 - total flux cleaned = 0.00120799 Jy ! Component: 150 - total flux cleaned = 0.00186109 Jy ! Component: 200 - total flux cleaned = 0.00233436 Jy ! Component: 250 - total flux cleaned = 0.00250904 Jy ! Component: 300 - total flux cleaned = 0.00274559 Jy ! Component: 350 - total flux cleaned = 0.00287623 Jy ! Component: 400 - total flux cleaned = 0.00287652 Jy ! Component: 450 - total flux cleaned = 0.00287691 Jy ! Component: 500 - total flux cleaned = 0.00281675 Jy ! Component: 550 - total flux cleaned = 0.00281711 Jy ! Component: 600 - total flux cleaned = 0.00278765 Jy ! Component: 650 - total flux cleaned = 0.00264729 Jy ! Component: 700 - total flux cleaned = 0.00259348 Jy ! Component: 750 - total flux cleaned = 0.00262018 Jy ! Component: 800 - total flux cleaned = 0.00256778 Jy ! Component: 850 - total flux cleaned = 0.00254162 Jy ! Component: 900 - total flux cleaned = 0.0025922 Jy ! Component: 950 - total flux cleaned = 0.00259173 Jy ! Component: 1000 - total flux cleaned = 0.00268937 Jy ! Component: 1050 - total flux cleaned = 0.00276142 Jy ! Component: 1100 - total flux cleaned = 0.00280877 Jy ! Component: 1150 - total flux cleaned = 0.00280863 Jy ! Component: 1200 - total flux cleaned = 0.00292432 Jy ! Component: 1250 - total flux cleaned = 0.00303781 Jy ! Component: 1300 - total flux cleaned = 0.00305985 Jy ! Component: 1350 - total flux cleaned = 0.00314885 Jy ! Component: 1400 - total flux cleaned = 0.00321434 Jy ! Component: 1450 - total flux cleaned = 0.00325737 Jy ! Component: 1500 - total flux cleaned = 0.00330019 Jy ! Component: 1550 - total flux cleaned = 0.00344714 Jy ! Component: 1600 - total flux cleaned = 0.00346793 Jy ! Component: 1650 - total flux cleaned = 0.00356966 Jy ! Component: 1700 - total flux cleaned = 0.00365042 Jy ! Component: 1750 - total flux cleaned = 0.00382959 Jy ! Component: 1800 - total flux cleaned = 0.003869 Jy ! Component: 1850 - total flux cleaned = 0.00398558 Jy ! Component: 1900 - total flux cleaned = 0.00404282 Jy ! Component: 1950 - total flux cleaned = 0.00409969 Jy ! Component: 2000 - total flux cleaned = 0.00419359 Jy ! Component: 2050 - total flux cleaned = 0.00426752 Jy ! Component: 2100 - total flux cleaned = 0.00426774 Jy ! Component: 2150 - total flux cleaned = 0.00446755 Jy ! Component: 2200 - total flux cleaned = 0.00453943 Jy ! Component: 2250 - total flux cleaned = 0.00459263 Jy ! Component: 2300 - total flux cleaned = 0.00471574 Jy ! Component: 2350 - total flux cleaned = 0.00473333 Jy ! Component: 2400 - total flux cleaned = 0.00485364 Jy ! Component: 2450 - total flux cleaned = 0.00483668 Jy ! Component: 2500 - total flux cleaned = 0.00495488 Jy ! Component: 2550 - total flux cleaned = 0.00493832 Jy ! Component: 2600 - total flux cleaned = 0.00503757 Jy ! Component: 2650 - total flux cleaned = 0.00502095 Jy ! Component: 2700 - total flux cleaned = 0.00506942 Jy ! Component: 2750 - total flux cleaned = 0.00513352 Jy ! Component: 2800 - total flux cleaned = 0.0051494 Jy ! Component: 2850 - total flux cleaned = 0.00521239 Jy ! Component: 2900 - total flux cleaned = 0.00519672 Jy ! Component: 2950 - total flux cleaned = 0.00519675 Jy ! Component: 3000 - total flux cleaned = 0.00527332 Jy ! Component: 3050 - total flux cleaned = 0.00528857 Jy ! Component: 3100 - total flux cleaned = 0.00533372 Jy ! Component: 3150 - total flux cleaned = 0.0053485 Jy ! Component: 3200 - total flux cleaned = 0.00540761 Jy ! Component: 3250 - total flux cleaned = 0.00536362 Jy ! Component: 3300 - total flux cleaned = 0.00537828 Jy ! Component: 3350 - total flux cleaned = 0.00540725 Jy ! Component: 3400 - total flux cleaned = 0.00542173 Jy ! Component: 3450 - total flux cleaned = 0.005436 Jy ! Component: 3500 - total flux cleaned = 0.0054642 Jy ! Component: 3550 - total flux cleaned = 0.00542189 Jy ! Component: 3600 - total flux cleaned = 0.00542191 Jy ! Component: 3650 - total flux cleaned = 0.00539424 Jy ! Component: 3700 - total flux cleaned = 0.00538058 Jy ! Component: 3750 - total flux cleaned = 0.00535347 Jy ! Component: 3800 - total flux cleaned = 0.00535342 Jy ! Component: 3850 - total flux cleaned = 0.00531294 Jy ! Component: 3900 - total flux cleaned = 0.00533952 Jy ! Component: 3950 - total flux cleaned = 0.00528606 Jy ! Component: 4000 - total flux cleaned = 0.00523303 Jy ! Component: 4050 - total flux cleaned = 0.00527248 Jy ! Total flux subtracted in 4096 components = 0.00523325 Jy ! Clean residual min=-0.000675 max=0.000718 Jy/beam ! Clean residual mean=0.000006 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.161307 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 386 components and 0.161307 Jy ![Exited script file: muppet] wmap "J1349-3056_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 16.35 at -21.23 degrees (North through East) ! Clean map min=-0.0019986 max=0.12404 Jy/beam ! Writing clean map to FITS file: J1349-3056_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124044 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236507 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.571989 0.571989 1.14398 2.28796 4.57591 9.15183 18.3037 36.6073 73.2146 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 16.35 at -21.23 degrees (North through East) ! Clean map min=-0.0019986 max=0.12404 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1349-3056_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:59:16 2019