! Started logfile: J1349-3056_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:19 2019 obs J1349-3056_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1349-3056_S_2017_04_28_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.758565 visibilities/baseline/integration-bin. ! Found source: J1349-3056 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1349-3056_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 602 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895346Jy sigma=0.034668 ! Fit after self-cal, rms=0.863799Jy sigma=0.034635 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=6.922 mas, bpa=-7.692 degrees ! Estimated noise=1344.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700088 Jy ! Component: 100 - total flux cleaned = 0.0914444 Jy ! Total flux subtracted in 100 components = 0.0914444 Jy ! Clean residual min=-0.027118 max=0.030800 Jy/beam ! Clean residual mean=0.000209 rms=0.009063 Jy/beam ! Combined flux in latest and established models = 0.0914444 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0914444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149032Jy sigma=0.002968 ! Fit after self-cal, rms=0.148983Jy sigma=0.002964 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=9.085 mas, bpa=-6.613 degrees ! Estimated noise=644.616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00971452 Jy ! Component: 100 - total flux cleaned = -0.00996713 Jy ! Component: 150 - total flux cleaned = -0.0101893 Jy ! Component: 200 - total flux cleaned = -0.0103912 Jy ! Total flux subtracted in 200 components = -0.0103912 Jy ! Clean residual min=-0.029785 max=0.036574 Jy/beam ! Clean residual mean=0.000380 rms=0.010695 Jy/beam ! Combined flux in latest and established models = 0.0810532 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.0810532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150138Jy sigma=0.002709 ! Fit after self-cal, rms=0.149968Jy sigma=0.002709 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.69 HN 0.96 KP 0.68 ! LA 0.65 MK 0.71 NL 0.69 OV 0.70 ! PT 0.68 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.67 FD 0.63 HN 1.09 KP 0.65 ! LA 0.65 MK 0.65 NL 0.80 OV 0.73 ! PT 0.67 SC 1.22 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.65 HN 1.02 KP 0.68 ! LA 0.65 MK 0.67 NL 0.73 OV 0.66 ! PT 0.67 SC 1.20 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.91 HN 1.17 KP 1.00* ! LA 19.95 MK 0.80 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.149968Jy sigma=0.002709 ! Fit after self-cal, rms=0.091147Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=8.732 mas, bpa=-3.583 degrees ! Estimated noise=634.681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804356 Jy ! Component: 100 - total flux cleaned = 0.000707441 Jy ! Component: 150 - total flux cleaned = 0.000706162 Jy ! Component: 200 - total flux cleaned = 0.000745392 Jy ! Total flux subtracted in 200 components = 0.000745392 Jy ! Clean residual min=-0.002410 max=0.002143 Jy/beam ! Clean residual mean=0.000009 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0817986 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0817986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091040Jy sigma=0.000674 ! Fit after self-cal, rms=0.089905Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089905Jy sigma=0.000665 ! Fit after self-cal, rms=0.085931Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=8.686 mas, bpa=-4.48 degrees ! Estimated noise=623.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491506 Jy ! Component: 100 - total flux cleaned = 0.0004622 Jy ! Component: 150 - total flux cleaned = 0.000540058 Jy ! Component: 200 - total flux cleaned = 0.000587956 Jy ! Total flux subtracted in 200 components = 0.000587956 Jy ! Clean residual min=-0.002125 max=0.001971 Jy/beam ! Clean residual mean=0.000006 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0823865 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0823865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085893Jy sigma=0.000660 ! Fit after self-cal, rms=0.085876Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.38998e-05 Jy ! Component: 100 - total flux cleaned = 5.13419e-05 Jy ! Component: 150 - total flux cleaned = 5.29229e-05 Jy ! Component: 200 - total flux cleaned = 5.33773e-05 Jy ! Total flux subtracted in 200 components = 5.33773e-05 Jy ! Clean residual min=-0.002092 max=0.001981 Jy/beam ! Clean residual mean=0.000006 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0824399 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.0824399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085853Jy sigma=0.000660 ! Fit after self-cal, rms=0.085839Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085839Jy sigma=0.000660 ! Fit after self-cal, rms=0.093364Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=8.669 mas, bpa=-4.49 degrees ! Estimated noise=622.446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419866 Jy ! Component: 100 - total flux cleaned = 0.000444201 Jy ! Component: 150 - total flux cleaned = 0.000466286 Jy ! Component: 200 - total flux cleaned = 0.000465074 Jy ! Total flux subtracted in 200 components = 0.000465074 Jy ! Clean residual min=-0.001825 max=0.001590 Jy/beam ! Clean residual mean=0.000005 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0829049 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0829049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093338Jy sigma=0.000658 ! Fit after self-cal, rms=0.093357Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.10885e-06 Jy ! Component: 100 - total flux cleaned = 2.29761e-05 Jy ! Component: 150 - total flux cleaned = 4.0584e-05 Jy ! Component: 200 - total flux cleaned = 5.77198e-05 Jy ! Total flux subtracted in 200 components = 5.77198e-05 Jy ! Clean residual min=-0.001807 max=0.001572 Jy/beam ! Clean residual mean=0.000005 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0829627 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0829627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093340Jy sigma=0.000658 ! Fit after self-cal, rms=0.093324Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093324Jy sigma=0.000658 ! Fit after self-cal, rms=0.092766Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.428 mas, bmaj=24.53 mas, bpa=4.917 degrees ! Estimated noise=679.446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568629 Jy ! Component: 100 - total flux cleaned = 0.000607944 Jy ! Component: 150 - total flux cleaned = 0.000631309 Jy ! Component: 200 - total flux cleaned = 0.000642694 Jy ! Total flux subtracted in 200 components = 0.000642694 Jy ! Clean residual min=-0.001745 max=0.001671 Jy/beam ! Clean residual mean=0.000009 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0836054 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 38 components and 0.0836054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092754Jy sigma=0.000658 ! Fit after self-cal, rms=0.092727Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.39018e-05 Jy ! Component: 100 - total flux cleaned = 3.32448e-05 Jy ! Component: 150 - total flux cleaned = 2.21815e-05 Jy ! Component: 200 - total flux cleaned = 4.24198e-05 Jy ! Total flux subtracted in 200 components = 4.24198e-05 Jy ! Clean residual min=-0.001730 max=0.001653 Jy/beam ! Clean residual mean=0.000009 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0836478 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 38 components and 0.0836478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092720Jy sigma=0.000658 ! Fit after self-cal, rms=0.092707Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=8.647 mas, bpa=-4.518 degrees ! Estimated noise=621.617 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 8.647 at -4.518 degrees (North through East) ! Clean map min=-0.0028472 max=0.084168 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=6.911 mas, bpa=-4.739 degrees ! Estimated noise=1206.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.062671 Jy ! Component: 100 - total flux cleaned = 0.0800707 Jy ! Component: 150 - total flux cleaned = 0.082452 Jy ! Component: 200 - total flux cleaned = 0.0822468 Jy ! Total flux subtracted in 200 components = 0.0822468 Jy ! Clean residual min=-0.004089 max=0.003457 Jy/beam ! Clean residual mean=0.000004 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.0822468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0822468 Jy ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=8.647 mas, bpa=-4.518 degrees ! Estimated noise=621.617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177997 Jy ! Component: 100 - total flux cleaned = 0.00190627 Jy ! Component: 150 - total flux cleaned = 0.00190627 Jy ! Component: 200 - total flux cleaned = 0.00199166 Jy ! Total flux subtracted in 200 components = 0.00199166 Jy ! Clean residual min=-0.002030 max=0.001679 Jy/beam ! Clean residual mean=0.000006 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0842384 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.0842384 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.428 mas, bmaj=24.53 mas, bpa=4.917 degrees ! Estimated noise=679.446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825035 Jy ! Component: 100 - total flux cleaned = 0.000799968 Jy ! Component: 150 - total flux cleaned = 0.000754613 Jy ! Component: 200 - total flux cleaned = 0.00075228 Jy ! Total flux subtracted in 200 components = 0.00075228 Jy ! Clean residual min=-0.001703 max=0.001639 Jy/beam ! Clean residual mean=0.000011 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0849907 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.92861e-06 Jy ! Component: 100 - total flux cleaned = -3.56983e-06 Jy ! Component: 150 - total flux cleaned = -2.49136e-05 Jy ! Component: 200 - total flux cleaned = -2.53573e-05 Jy ! Total flux subtracted in 200 components = -2.53573e-05 Jy ! Clean residual min=-0.001683 max=0.001622 Jy/beam ! Clean residual mean=0.000011 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0849654 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.0849654 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=8.647 mas, bpa=-4.518 degrees ! Estimated noise=621.617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132095 Jy ! Component: 100 - total flux cleaned = -0.000247862 Jy ! Component: 150 - total flux cleaned = -0.000296206 Jy ! Component: 200 - total flux cleaned = -0.000296837 Jy ! Total flux subtracted in 200 components = -0.000296837 Jy ! Clean residual min=-0.001827 max=0.001589 Jy/beam ! Clean residual mean=0.000006 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0846685 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.0846685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092891Jy sigma=0.000658 ! Fit after self-cal, rms=0.093009Jy sigma=0.000658 wmodel J1349-3056_S_2017_04_28_pus_map.mod ! Writing 55 model components to file: J1349-3056_S_2017_04_28_pus_map.mod wobs J1349-3056_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1349-3056_S_2017_04_28_pus_uvs.fits wwins J1349-3056_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J1349-3056_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392982 Jy ! Component: 100 - total flux cleaned = -0.000278569 Jy ! Component: 150 - total flux cleaned = -0.000223305 Jy ! Component: 200 - total flux cleaned = -0.000300716 Jy ! Component: 250 - total flux cleaned = -0.000274606 Jy ! Component: 300 - total flux cleaned = -0.000324158 Jy ! Component: 350 - total flux cleaned = -0.000277182 Jy ! Component: 400 - total flux cleaned = -0.000276903 Jy ! Component: 450 - total flux cleaned = -0.000164038 Jy ! Component: 500 - total flux cleaned = -5.41301e-05 Jy ! Component: 550 - total flux cleaned = 5.31283e-05 Jy ! Component: 600 - total flux cleaned = 0.000158013 Jy ! Component: 650 - total flux cleaned = 0.000281754 Jy ! Component: 700 - total flux cleaned = 0.000423219 Jy ! Component: 750 - total flux cleaned = 0.000542303 Jy ! Component: 800 - total flux cleaned = 0.000620065 Jy ! Component: 850 - total flux cleaned = 0.000715866 Jy ! Component: 900 - total flux cleaned = 0.000809893 Jy ! Component: 950 - total flux cleaned = 0.000846982 Jy ! Component: 1000 - total flux cleaned = 0.000956464 Jy ! Component: 1050 - total flux cleaned = 0.0010102 Jy ! Component: 1100 - total flux cleaned = 0.00104594 Jy ! Component: 1150 - total flux cleaned = 0.00113367 Jy ! Component: 1200 - total flux cleaned = 0.00121933 Jy ! Component: 1250 - total flux cleaned = 0.00127017 Jy ! Component: 1300 - total flux cleaned = 0.00133708 Jy ! Component: 1350 - total flux cleaned = 0.00137003 Jy ! Component: 1400 - total flux cleaned = 0.00138652 Jy ! Component: 1450 - total flux cleaned = 0.00143499 Jy ! Component: 1500 - total flux cleaned = 0.00146651 Jy ! Component: 1550 - total flux cleaned = 0.00148174 Jy ! Component: 1600 - total flux cleaned = 0.00148153 Jy ! Component: 1650 - total flux cleaned = 0.00145105 Jy ! Component: 1700 - total flux cleaned = 0.00145105 Jy ! Component: 1750 - total flux cleaned = 0.00143579 Jy ! Component: 1800 - total flux cleaned = 0.00133212 Jy ! Component: 1850 - total flux cleaned = 0.00134703 Jy ! Component: 1900 - total flux cleaned = 0.00133245 Jy ! Component: 1950 - total flux cleaned = 0.00133246 Jy ! Component: 2000 - total flux cleaned = 0.00133207 Jy ! Component: 2050 - total flux cleaned = 0.00130393 Jy ! Component: 2100 - total flux cleaned = 0.00135984 Jy ! Component: 2150 - total flux cleaned = 0.00131818 Jy ! Component: 2200 - total flux cleaned = 0.00138708 Jy ! Component: 2250 - total flux cleaned = 0.0014143 Jy ! Component: 2300 - total flux cleaned = 0.00144135 Jy ! Component: 2350 - total flux cleaned = 0.00150833 Jy ! Component: 2400 - total flux cleaned = 0.00150822 Jy ! Component: 2450 - total flux cleaned = 0.00157405 Jy ! Component: 2500 - total flux cleaned = 0.00154781 Jy ! Component: 2550 - total flux cleaned = 0.00157379 Jy ! Component: 2600 - total flux cleaned = 0.00162526 Jy ! Component: 2650 - total flux cleaned = 0.00162534 Jy ! Component: 2700 - total flux cleaned = 0.00166345 Jy ! Component: 2750 - total flux cleaned = 0.00166355 Jy ! Component: 2800 - total flux cleaned = 0.00171356 Jy ! Component: 2850 - total flux cleaned = 0.00173842 Jy ! Component: 2900 - total flux cleaned = 0.00170145 Jy ! Component: 2950 - total flux cleaned = 0.0017384 Jy ! Component: 3000 - total flux cleaned = 0.0017871 Jy ! Component: 3050 - total flux cleaned = 0.00181126 Jy ! Component: 3100 - total flux cleaned = 0.00185933 Jy ! Component: 3150 - total flux cleaned = 0.00187136 Jy ! Component: 3200 - total flux cleaned = 0.00193064 Jy ! Component: 3250 - total flux cleaned = 0.00193067 Jy ! Component: 3300 - total flux cleaned = 0.00198926 Jy ! Component: 3350 - total flux cleaned = 0.00200101 Jy ! Component: 3400 - total flux cleaned = 0.0020935 Jy ! Component: 3450 - total flux cleaned = 0.00210492 Jy ! Component: 3500 - total flux cleaned = 0.00211643 Jy ! Component: 3550 - total flux cleaned = 0.00219584 Jy ! Component: 3600 - total flux cleaned = 0.00224087 Jy ! Component: 3650 - total flux cleaned = 0.00229683 Jy ! Component: 3700 - total flux cleaned = 0.00231913 Jy ! Component: 3750 - total flux cleaned = 0.00235234 Jy ! Component: 3800 - total flux cleaned = 0.00239639 Jy ! Component: 3850 - total flux cleaned = 0.00246207 Jy ! Component: 3900 - total flux cleaned = 0.00247292 Jy ! Component: 3950 - total flux cleaned = 0.00253797 Jy ! Component: 4000 - total flux cleaned = 0.00257021 Jy ! Component: 4050 - total flux cleaned = 0.00259156 Jy ! Total flux subtracted in 4096 components = 0.0026129 Jy ! Clean residual min=-0.000733 max=0.000622 Jy/beam ! Clean residual mean=-0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0872814 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 300 components and 0.0872814 Jy ![Exited script file: muppet] wmap "J1349-3056_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 8.647 at -4.518 degrees (North through East) ! Clean map min=-0.0014568 max=0.080288 Jy/beam ! Writing clean map to FITS file: J1349-3056_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0802876 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193279 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.722199 0.722199 1.4444 2.8888 5.77759 11.5552 23.1104 46.2207 92.4414 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 8.647 at -4.518 degrees (North through East) ! Clean map min=-0.0014568 max=0.080288 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1349-3056_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:24 2019