! Started logfile: J1348-1704_S_2017_03_23_pus_uvs.log on Mon May 13 10:01:16 2019 obs J1348-1704_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1348-1704_S_2017_03_23_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.691204 visibilities/baseline/integration-bin. ! Found source: J1348-1704 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 17916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1348-1704_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 654 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996374Jy sigma=0.007127 ! Fit after self-cal, rms=0.945570Jy sigma=0.006784 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=7.244 mas, bpa=1.889 degrees ! Estimated noise=1564.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447909 Jy ! Component: 100 - total flux cleaned = 0.0549969 Jy ! Total flux subtracted in 100 components = 0.0549969 Jy ! Clean residual min=-0.004466 max=0.004002 Jy/beam ! Clean residual mean=-0.000016 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.0549969 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0549969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097128Jy sigma=0.000645 ! Fit after self-cal, rms=0.096229Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.319 mas, bpa=1.017 degrees ! Estimated noise=814.151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500742 Jy ! Component: 100 - total flux cleaned = 0.00709491 Jy ! Component: 150 - total flux cleaned = 0.00814141 Jy ! Component: 200 - total flux cleaned = 0.00861673 Jy ! Total flux subtracted in 200 components = 0.00861673 Jy ! Clean residual min=-0.002264 max=0.002667 Jy/beam ! Clean residual mean=-0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0636136 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 0.0636136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095914Jy sigma=0.000637 ! Fit after self-cal, rms=0.095870Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.01 KP 1.04 ! LA 1.12 MK 1.07 NL 0.81 OV 1.11 ! PT 1.12 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.05 KP 0.99 ! LA 1.00 MK 1.08 NL 1.06 OV 0.98 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.07 HN 1.03 KP 0.95 ! LA 0.81 MK 1.03 NL 1.06 OV 1.03 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.09 HN 0.80 KP 1.00* ! LA 0.76 MK 1.08 NL 1.00* OV 0.96 ! PT 1.15 SC 1.08 ! ! ! Fit before self-cal, rms=0.095870Jy sigma=0.000637 ! Fit after self-cal, rms=0.092372Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.366 mas, bpa=1.27 degrees ! Estimated noise=814.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167005 Jy ! Component: 100 - total flux cleaned = 6.95742e-05 Jy ! Component: 150 - total flux cleaned = 4.4713e-05 Jy ! Component: 200 - total flux cleaned = 3.46637e-05 Jy ! Total flux subtracted in 200 components = 3.46637e-05 Jy ! Clean residual min=-0.002100 max=0.002244 Jy/beam ! Clean residual mean=-0.000004 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0636483 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.0636483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092367Jy sigma=0.000635 ! Fit after self-cal, rms=0.092252Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092252Jy sigma=0.000635 ! Fit after self-cal, rms=0.092746Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=8.376 mas, bpa=1.252 degrees ! Estimated noise=814.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198875 Jy ! Component: 100 - total flux cleaned = 0.000280192 Jy ! Component: 150 - total flux cleaned = 0.000294322 Jy ! Component: 200 - total flux cleaned = 0.000307176 Jy ! Total flux subtracted in 200 components = 0.000307176 Jy ! Clean residual min=-0.002063 max=0.002128 Jy/beam ! Clean residual mean=-0.000004 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0639554 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.0639554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092739Jy sigma=0.000634 ! Fit after self-cal, rms=0.092762Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47.5, -78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214166 Jy ! Component: 100 - total flux cleaned = 0.00274568 Jy ! Component: 150 - total flux cleaned = 0.00300051 Jy ! Component: 200 - total flux cleaned = 0.00324876 Jy ! Total flux subtracted in 200 components = 0.00324876 Jy ! Clean residual min=-0.002021 max=0.002113 Jy/beam ! Clean residual mean=-0.000002 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0672042 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0672042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092703Jy sigma=0.000633 ! Fit after self-cal, rms=0.092685Jy sigma=0.000633 ! Inverting map ! Added new window around map position (93.5, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163894 Jy ! Component: 100 - total flux cleaned = 0.00219187 Jy ! Component: 150 - total flux cleaned = 0.00248735 Jy ! Component: 200 - total flux cleaned = 0.00259836 Jy ! Total flux subtracted in 200 components = 0.00259836 Jy ! Clean residual min=-0.001959 max=0.001776 Jy/beam ! Clean residual mean=-0.000002 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.0698026 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.0698026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092628Jy sigma=0.000633 ! Fit after self-cal, rms=0.092619Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092619Jy sigma=0.000632 ! Fit after self-cal, rms=0.092710Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=8.385 mas, bpa=1.233 degrees ! Estimated noise=811.231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124427 Jy ! Component: 100 - total flux cleaned = 0.00132585 Jy ! Component: 150 - total flux cleaned = 0.00143248 Jy ! Component: 200 - total flux cleaned = 0.00156301 Jy ! Total flux subtracted in 200 components = 0.00156301 Jy ! Clean residual min=-0.001914 max=0.001676 Jy/beam ! Clean residual mean=-0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0713656 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.0713656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092676Jy sigma=0.000632 ! Fit after self-cal, rms=0.092707Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601392 Jy ! Component: 100 - total flux cleaned = 0.000734785 Jy ! Component: 150 - total flux cleaned = 0.000888709 Jy ! Component: 200 - total flux cleaned = 0.00103018 Jy ! Total flux subtracted in 200 components = 0.00103018 Jy ! Clean residual min=-0.001894 max=0.001637 Jy/beam ! Clean residual mean=-0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0723958 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.0723957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092684Jy sigma=0.000632 ! Fit after self-cal, rms=0.092680Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092680Jy sigma=0.000632 ! Fit after self-cal, rms=0.092785Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.262 mas, bmaj=14.74 mas, bpa=7.236 degrees ! Estimated noise=1010.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461392 Jy ! Component: 100 - total flux cleaned = 0.000647863 Jy ! Component: 150 - total flux cleaned = 0.000822726 Jy ! Component: 200 - total flux cleaned = 0.000985881 Jy ! Total flux subtracted in 200 components = 0.000985881 Jy ! Clean residual min=-0.001891 max=0.001961 Jy/beam ! Clean residual mean=-0.000004 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0733816 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 121 components and 0.0733816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092778Jy sigma=0.000632 ! Fit after self-cal, rms=0.092782Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289503 Jy ! Component: 100 - total flux cleaned = 0.000449756 Jy ! Component: 150 - total flux cleaned = 0.000598969 Jy ! Component: 200 - total flux cleaned = 0.000670347 Jy ! Total flux subtracted in 200 components = 0.000670347 Jy ! Clean residual min=-0.001867 max=0.002037 Jy/beam ! Clean residual mean=-0.000003 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.074052 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 133 components and 0.074052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092780Jy sigma=0.000632 ! Fit after self-cal, rms=0.092779Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.386 mas, bpa=1.264 degrees ! Estimated noise=810.709 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.386 at 1.264 degrees (North through East) ! Clean map min=-0.002066 max=0.059013 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.316 mas, bpa=2.242 degrees ! Estimated noise=1555.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449899 Jy ! Component: 100 - total flux cleaned = 0.0552861 Jy ! Component: 150 - total flux cleaned = 0.0603465 Jy ! Component: 200 - total flux cleaned = 0.063674 Jy ! Total flux subtracted in 200 components = 0.063674 Jy ! Clean residual min=-0.004391 max=0.003482 Jy/beam ! Clean residual mean=-0.000016 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.063674 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.063674 Jy ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.386 mas, bpa=1.264 degrees ! Estimated noise=810.709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327931 Jy ! Component: 100 - total flux cleaned = 0.00499366 Jy ! Component: 150 - total flux cleaned = 0.00612794 Jy ! Component: 200 - total flux cleaned = 0.006828 Jy ! Total flux subtracted in 200 components = 0.006828 Jy ! Clean residual min=-0.001948 max=0.001798 Jy/beam ! Clean residual mean=-0.000004 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.070502 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.070502 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.262 mas, bmaj=14.74 mas, bpa=7.236 degrees ! Estimated noise=1010.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772615 Jy ! Component: 100 - total flux cleaned = 0.00119334 Jy ! Component: 150 - total flux cleaned = 0.00164156 Jy ! Component: 200 - total flux cleaned = 0.00201732 Jy ! Total flux subtracted in 200 components = 0.00201732 Jy ! Clean residual min=-0.001967 max=0.002049 Jy/beam ! Clean residual mean=-0.000006 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0725193 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287853 Jy ! Component: 100 - total flux cleaned = 0.00056451 Jy ! Component: 150 - total flux cleaned = 0.000804927 Jy ! Component: 200 - total flux cleaned = 0.00103471 Jy ! Total flux subtracted in 200 components = 0.00103471 Jy ! Clean residual min=-0.001876 max=0.002044 Jy/beam ! Clean residual mean=-0.000005 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.073554 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 0.073554 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.386 mas, bpa=1.264 degrees ! Estimated noise=810.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299838 Jy ! Component: 100 - total flux cleaned = -0.000123218 Jy ! Component: 150 - total flux cleaned = -4.76388e-06 Jy ! Component: 200 - total flux cleaned = 0.000102825 Jy ! Total flux subtracted in 200 components = 0.000102825 Jy ! Clean residual min=-0.001896 max=0.001621 Jy/beam ! Clean residual mean=-0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0736569 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 94 components and 0.0736569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092803Jy sigma=0.000632 ! Fit after self-cal, rms=0.092792Jy sigma=0.000632 wmodel J1348-1704_S_2017_03_23_pus_map.mod ! Writing 94 model components to file: J1348-1704_S_2017_03_23_pus_map.mod wobs J1348-1704_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1348-1704_S_2017_03_23_pus_uvs.fits wwins J1348-1704_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J1348-1704_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000857889 Jy ! Component: 100 - total flux cleaned = -0.00148739 Jy ! Component: 150 - total flux cleaned = -0.00196139 Jy ! Component: 200 - total flux cleaned = -0.00221594 Jy ! Component: 250 - total flux cleaned = -0.00251674 Jy ! Component: 300 - total flux cleaned = -0.00272903 Jy ! Component: 350 - total flux cleaned = -0.00285861 Jy ! Component: 400 - total flux cleaned = -0.00298443 Jy ! Component: 450 - total flux cleaned = -0.00308253 Jy ! Component: 500 - total flux cleaned = -0.00317809 Jy ! Component: 550 - total flux cleaned = -0.00320131 Jy ! Component: 600 - total flux cleaned = -0.00329362 Jy ! Component: 650 - total flux cleaned = -0.00333909 Jy ! Component: 700 - total flux cleaned = -0.00340601 Jy ! Component: 750 - total flux cleaned = -0.0034931 Jy ! Component: 800 - total flux cleaned = -0.00359974 Jy ! Component: 850 - total flux cleaned = -0.00362072 Jy ! Component: 900 - total flux cleaned = -0.00374452 Jy ! Component: 950 - total flux cleaned = -0.00376484 Jy ! Component: 1000 - total flux cleaned = -0.0038047 Jy ! Component: 1050 - total flux cleaned = -0.00384419 Jy ! Component: 1100 - total flux cleaned = -0.00390248 Jy ! Component: 1150 - total flux cleaned = -0.00390259 Jy ! Component: 1200 - total flux cleaned = -0.00403495 Jy ! Component: 1250 - total flux cleaned = -0.00409088 Jy ! Component: 1300 - total flux cleaned = -0.00416417 Jy ! Component: 1350 - total flux cleaned = -0.00420055 Jy ! Component: 1400 - total flux cleaned = -0.00421853 Jy ! Component: 1450 - total flux cleaned = -0.00428963 Jy ! Component: 1500 - total flux cleaned = -0.00430741 Jy ! Component: 1550 - total flux cleaned = -0.00427288 Jy ! Component: 1600 - total flux cleaned = -0.00435889 Jy ! Component: 1650 - total flux cleaned = -0.00434191 Jy ! Component: 1700 - total flux cleaned = -0.00440911 Jy ! Component: 1750 - total flux cleaned = -0.00432611 Jy ! Component: 1800 - total flux cleaned = -0.00434274 Jy ! Component: 1850 - total flux cleaned = -0.00439145 Jy ! Component: 1900 - total flux cleaned = -0.00431064 Jy ! Component: 1950 - total flux cleaned = -0.0043905 Jy ! Component: 2000 - total flux cleaned = -0.00437448 Jy ! Component: 2050 - total flux cleaned = -0.00435898 Jy ! Component: 2100 - total flux cleaned = -0.00440558 Jy ! Component: 2150 - total flux cleaned = -0.00440538 Jy ! Component: 2200 - total flux cleaned = -0.00437491 Jy ! Component: 2250 - total flux cleaned = -0.00437492 Jy ! Component: 2300 - total flux cleaned = -0.00437501 Jy ! Component: 2350 - total flux cleaned = -0.00438976 Jy ! Component: 2400 - total flux cleaned = -0.00441928 Jy ! Component: 2450 - total flux cleaned = -0.00436079 Jy ! Component: 2500 - total flux cleaned = -0.00437544 Jy ! Component: 2550 - total flux cleaned = -0.00438976 Jy ! Component: 2600 - total flux cleaned = -0.00437557 Jy ! Component: 2650 - total flux cleaned = -0.00436153 Jy ! Component: 2700 - total flux cleaned = -0.00436163 Jy ! Component: 2750 - total flux cleaned = -0.00437549 Jy ! Component: 2800 - total flux cleaned = -0.00438925 Jy ! Component: 2850 - total flux cleaned = -0.0043893 Jy ! Component: 2900 - total flux cleaned = -0.00443018 Jy ! Component: 2950 - total flux cleaned = -0.00445722 Jy ! Component: 3000 - total flux cleaned = -0.00436336 Jy ! Component: 3050 - total flux cleaned = -0.00437683 Jy ! Component: 3100 - total flux cleaned = -0.00444286 Jy ! Component: 3150 - total flux cleaned = -0.00440356 Jy ! Component: 3200 - total flux cleaned = -0.00435135 Jy ! Component: 3250 - total flux cleaned = -0.00431262 Jy ! Component: 3300 - total flux cleaned = -0.00433837 Jy ! Component: 3350 - total flux cleaned = -0.00431279 Jy ! Component: 3400 - total flux cleaned = -0.00433809 Jy ! Component: 3450 - total flux cleaned = -0.00428769 Jy ! Component: 3500 - total flux cleaned = -0.00423757 Jy ! Component: 3550 - total flux cleaned = -0.0042002 Jy ! Component: 3600 - total flux cleaned = -0.00417539 Jy ! Component: 3650 - total flux cleaned = -0.00416313 Jy ! Component: 3700 - total flux cleaned = -0.00407743 Jy ! Component: 3750 - total flux cleaned = -0.00405311 Jy ! Component: 3800 - total flux cleaned = -0.00401694 Jy ! Component: 3850 - total flux cleaned = -0.00400498 Jy ! Component: 3900 - total flux cleaned = -0.00395712 Jy ! Component: 3950 - total flux cleaned = -0.00393354 Jy ! Component: 4000 - total flux cleaned = -0.00387458 Jy ! Component: 4050 - total flux cleaned = -0.00380431 Jy ! Total flux subtracted in 4096 components = -0.00381604 Jy ! Clean residual min=-0.000722 max=0.000739 Jy/beam ! Clean residual mean=-0.000001 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.0698408 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 373 components and 0.0698409 Jy ![Exited script file: muppet] wmap "J1348-1704_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.386 at 1.264 degrees (North through East) ! Clean map min=-0.0021912 max=0.058853 Jy/beam ! Writing clean map to FITS file: J1348-1704_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0588535 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214617 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09399 1.09399 2.18798 4.37596 8.75191 17.5038 35.0076 70.0153 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.386 at 1.264 degrees (North through East) ! Clean map min=-0.0021912 max=0.058853 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1348-1704_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:01:23 2019