! Started logfile: J1347-3750_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:42:43 2019 obs J1347-3750_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1347-3750_S_2017_03_27_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.615278 visibilities/baseline/integration-bin. ! Found source: J1347-3750 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 10632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1347-3750_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 498 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988787Jy sigma=0.005733 ! Fit after self-cal, rms=0.920652Jy sigma=0.005414 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=7.712 mas, bpa=4.786 degrees ! Estimated noise=2361.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655699 Jy ! Component: 100 - total flux cleaned = 0.0807288 Jy ! Total flux subtracted in 100 components = 0.0807288 Jy ! Clean residual min=-0.006403 max=0.006888 Jy/beam ! Clean residual mean=0.000024 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.0807289 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0807289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125735Jy sigma=0.000637 ! Fit after self-cal, rms=0.125180Jy sigma=0.000635 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=9.11 mas, bpa=5.173 degrees ! Estimated noise=1388.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069193 Jy ! Component: 100 - total flux cleaned = 0.00920309 Jy ! Component: 150 - total flux cleaned = 0.00947509 Jy ! Component: 200 - total flux cleaned = 0.00953947 Jy ! Total flux subtracted in 200 components = 0.00953947 Jy ! Clean residual min=-0.003802 max=0.004152 Jy/beam ! Clean residual mean=0.000032 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.0902683 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 0.0902683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124729Jy sigma=0.000633 ! Fit after self-cal, rms=0.124711Jy sigma=0.000633 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.81 KP 1.08 ! LA 0.95 MK 1.05 NL 1.00* OV 1.07 ! PT 1.07 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 HN 0.96 KP 1.04 ! LA 0.97 MK 1.10 NL 0.94 OV 0.99 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.07 HN 0.80 KP 1.06 ! LA 0.99 MK 1.04 NL 0.95 OV 0.92 ! PT 1.07 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.00* KP 1.00* ! LA 0.88 MK 0.91 NL 1.00* OV 0.74 ! PT 1.08 SC 0.79 ! ! ! Fit before self-cal, rms=0.124711Jy sigma=0.000633 ! Fit after self-cal, rms=0.117815Jy sigma=0.000631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=9.181 mas, bpa=5.507 degrees ! Estimated noise=1385.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.51474e-05 Jy ! Component: 100 - total flux cleaned = 8.65986e-05 Jy ! Component: 150 - total flux cleaned = 8.5602e-05 Jy ! Component: 200 - total flux cleaned = 7.07058e-05 Jy ! Total flux subtracted in 200 components = 7.07058e-05 Jy ! Clean residual min=-0.002888 max=0.003456 Jy/beam ! Clean residual mean=0.000042 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.090339 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.090339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117808Jy sigma=0.000631 ! Fit after self-cal, rms=0.117616Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117616Jy sigma=0.000630 ! Fit after self-cal, rms=0.117180Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=9.193 mas, bpa=5.537 degrees ! Estimated noise=1386.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222387 Jy ! Component: 100 - total flux cleaned = 0.000236461 Jy ! Component: 150 - total flux cleaned = 0.0002488 Jy ! Component: 200 - total flux cleaned = 0.000248722 Jy ! Total flux subtracted in 200 components = 0.000248722 Jy ! Clean residual min=-0.002884 max=0.003541 Jy/beam ! Clean residual mean=0.000044 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0905878 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0905878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117176Jy sigma=0.000630 ! Fit after self-cal, rms=0.117140Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (83, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300982 Jy ! Component: 100 - total flux cleaned = 0.0042863 Jy ! Component: 150 - total flux cleaned = 0.00470477 Jy ! Component: 200 - total flux cleaned = 0.00496698 Jy ! Total flux subtracted in 200 components = 0.00496698 Jy ! Clean residual min=-0.002863 max=0.003022 Jy/beam ! Clean residual mean=0.000023 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0955547 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 74 components and 0.0955547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117063Jy sigma=0.000629 ! Fit after self-cal, rms=0.117024Jy sigma=0.000629 ! Inverting map ! Added new window around map position (-62.5, -30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316692 Jy ! Component: 100 - total flux cleaned = 0.0045012 Jy ! Component: 150 - total flux cleaned = 0.00492886 Jy ! Component: 200 - total flux cleaned = 0.00506789 Jy ! Total flux subtracted in 200 components = 0.00506789 Jy ! Clean residual min=-0.002706 max=0.002575 Jy/beam ! Clean residual mean=0.000010 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.100623 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.100623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116924Jy sigma=0.000629 ! Fit after self-cal, rms=0.116886Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116886Jy sigma=0.000629 ! Fit after self-cal, rms=0.116721Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.222 mas, bpa=5.519 degrees ! Estimated noise=1381.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200252 Jy ! Component: 100 - total flux cleaned = 0.00257437 Jy ! Component: 150 - total flux cleaned = 0.00266188 Jy ! Component: 200 - total flux cleaned = 0.00270178 Jy ! Total flux subtracted in 200 components = 0.00270178 Jy ! Clean residual min=-0.002493 max=0.002615 Jy/beam ! Clean residual mean=0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.103324 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.103324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116670Jy sigma=0.000628 ! Fit after self-cal, rms=0.116676Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-111, -60.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184608 Jy ! Component: 100 - total flux cleaned = 0.00216812 Jy ! Component: 150 - total flux cleaned = 0.00249463 Jy ! Component: 200 - total flux cleaned = 0.00273893 Jy ! Total flux subtracted in 200 components = 0.00273893 Jy ! Clean residual min=-0.002118 max=0.002275 Jy/beam ! Clean residual mean=0.000000 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.106063 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.106063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116597Jy sigma=0.000628 ! Fit after self-cal, rms=0.116589Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116589Jy sigma=0.000628 ! Fit after self-cal, rms=0.116447Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=27.07 mas, bpa=5 degrees ! Estimated noise=1746.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789273 Jy ! Component: 100 - total flux cleaned = 0.00103052 Jy ! Component: 150 - total flux cleaned = 0.00116745 Jy ! Component: 200 - total flux cleaned = 0.00112082 Jy ! Total flux subtracted in 200 components = 0.00112082 Jy ! Clean residual min=-0.001839 max=0.001950 Jy/beam ! Clean residual mean=-0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.107184 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 134 components and 0.107184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116435Jy sigma=0.000627 ! Fit after self-cal, rms=0.116459Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220145 Jy ! Component: 100 - total flux cleaned = 0.000196104 Jy ! Component: 150 - total flux cleaned = 0.000153032 Jy ! Component: 200 - total flux cleaned = 0.000112348 Jy ! Total flux subtracted in 200 components = 0.000112348 Jy ! Clean residual min=-0.001813 max=0.001925 Jy/beam ! Clean residual mean=-0.000004 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.107296 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 138 components and 0.107297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116454Jy sigma=0.000627 ! Fit after self-cal, rms=0.116455Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.224 mas, bpa=5.469 degrees ! Estimated noise=1377.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 9.224 at 5.469 degrees (North through East) ! Clean map min=-0.0026657 max=0.085098 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.449 mas, bmaj=7.814 mas, bpa=5.075 degrees ! Estimated noise=2328.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652909 Jy ! Component: 100 - total flux cleaned = 0.0807666 Jy ! Component: 150 - total flux cleaned = 0.0891158 Jy ! Component: 200 - total flux cleaned = 0.0955685 Jy ! Total flux subtracted in 200 components = 0.0955685 Jy ! Clean residual min=-0.005104 max=0.005589 Jy/beam ! Clean residual mean=0.000009 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.0955685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0955685 Jy ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.224 mas, bpa=5.469 degrees ! Estimated noise=1377.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051434 Jy ! Component: 100 - total flux cleaned = 0.00780015 Jy ! Component: 150 - total flux cleaned = 0.00890394 Jy ! Component: 200 - total flux cleaned = 0.00958579 Jy ! Total flux subtracted in 200 components = 0.00958579 Jy ! Clean residual min=-0.002574 max=0.002517 Jy/beam ! Clean residual mean=0.000003 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.105154 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.105154 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=27.07 mas, bpa=5 degrees ! Estimated noise=1746.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118512 Jy ! Component: 100 - total flux cleaned = 0.00143239 Jy ! Component: 150 - total flux cleaned = 0.00162749 Jy ! Component: 200 - total flux cleaned = 0.00176941 Jy ! Total flux subtracted in 200 components = 0.00176941 Jy ! Clean residual min=-0.002074 max=0.002064 Jy/beam ! Clean residual mean=-0.000002 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.106924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.30553e-05 Jy ! Component: 100 - total flux cleaned = 9.1794e-05 Jy ! Component: 150 - total flux cleaned = 9.25418e-05 Jy ! Component: 200 - total flux cleaned = 0.000118642 Jy ! Total flux subtracted in 200 components = 0.000118642 Jy ! Clean residual min=-0.001942 max=0.002002 Jy/beam ! Clean residual mean=-0.000005 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.107042 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.107042 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=9.224 mas, bpa=5.469 degrees ! Estimated noise=1377.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406084 Jy ! Component: 100 - total flux cleaned = 0.000589565 Jy ! Component: 150 - total flux cleaned = 0.00081184 Jy ! Component: 200 - total flux cleaned = 0.00106593 Jy ! Total flux subtracted in 200 components = 0.00106593 Jy ! Clean residual min=-0.002207 max=0.002262 Jy/beam ! Clean residual mean=-0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.108108 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.108108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116455Jy sigma=0.000627 ! Fit after self-cal, rms=0.116455Jy sigma=0.000627 wmodel J1347-3750_S_2017_03_27_pus_map.mod ! Writing 92 model components to file: J1347-3750_S_2017_03_27_pus_map.mod wobs J1347-3750_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1347-3750_S_2017_03_27_pus_uvs.fits wwins J1347-3750_S_2017_03_27_pus_map.win ! wwins: Wrote 4 windows to J1347-3750_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125772 Jy ! Component: 100 - total flux cleaned = 0.000397575 Jy ! Component: 150 - total flux cleaned = 0.000472718 Jy ! Component: 200 - total flux cleaned = 0.00054504 Jy ! Component: 250 - total flux cleaned = 0.000476893 Jy ! Component: 300 - total flux cleaned = 0.000509201 Jy ! Component: 350 - total flux cleaned = 0.000508709 Jy ! Component: 400 - total flux cleaned = 0.000602536 Jy ! Component: 450 - total flux cleaned = 0.000571295 Jy ! Component: 500 - total flux cleaned = 0.000511583 Jy ! Component: 550 - total flux cleaned = 0.000541123 Jy ! Component: 600 - total flux cleaned = 0.00054114 Jy ! Component: 650 - total flux cleaned = 0.000540659 Jy ! Component: 700 - total flux cleaned = 0.000457699 Jy ! Component: 750 - total flux cleaned = 0.000403691 Jy ! Component: 800 - total flux cleaned = 0.00032422 Jy ! Component: 850 - total flux cleaned = 0.000246336 Jy ! Component: 900 - total flux cleaned = 0.000169645 Jy ! Component: 950 - total flux cleaned = 0.000119209 Jy ! Component: 1000 - total flux cleaned = 2.01062e-05 Jy ! Component: 1050 - total flux cleaned = -5.30259e-05 Jy ! Component: 1100 - total flux cleaned = -0.000172755 Jy ! Component: 1150 - total flux cleaned = -0.00031364 Jy ! Component: 1200 - total flux cleaned = -0.000452637 Jy ! Component: 1250 - total flux cleaned = -0.000566573 Jy ! Component: 1300 - total flux cleaned = -0.00070127 Jy ! Component: 1350 - total flux cleaned = -0.000878483 Jy ! Component: 1400 - total flux cleaned = -0.000922397 Jy ! Component: 1450 - total flux cleaned = -0.00105173 Jy ! Component: 1500 - total flux cleaned = -0.00124299 Jy ! Component: 1550 - total flux cleaned = -0.00134769 Jy ! Component: 1600 - total flux cleaned = -0.00147202 Jy ! Component: 1650 - total flux cleaned = -0.00159469 Jy ! Component: 1700 - total flux cleaned = -0.00175632 Jy ! Component: 1750 - total flux cleaned = -0.00189637 Jy ! Component: 1800 - total flux cleaned = -0.00201499 Jy ! Component: 1850 - total flux cleaned = -0.00219083 Jy ! Component: 1900 - total flux cleaned = -0.00222921 Jy ! Component: 1950 - total flux cleaned = -0.0022867 Jy ! Component: 2000 - total flux cleaned = -0.00240075 Jy ! Component: 2050 - total flux cleaned = -0.00253203 Jy ! Component: 2100 - total flux cleaned = -0.00260631 Jy ! Component: 2150 - total flux cleaned = -0.00269852 Jy ! Component: 2200 - total flux cleaned = -0.00278981 Jy ! Component: 2250 - total flux cleaned = -0.00286229 Jy ! Component: 2300 - total flux cleaned = -0.00298797 Jy ! Component: 2350 - total flux cleaned = -0.00309496 Jy ! Component: 2400 - total flux cleaned = -0.00316562 Jy ! Component: 2450 - total flux cleaned = -0.00328823 Jy ! Component: 2500 - total flux cleaned = -0.00337517 Jy ! Component: 2550 - total flux cleaned = -0.00347866 Jy ! Component: 2600 - total flux cleaned = -0.00359859 Jy ! Component: 2650 - total flux cleaned = -0.00375143 Jy ! Component: 2700 - total flux cleaned = -0.00383571 Jy ! Component: 2750 - total flux cleaned = -0.00395274 Jy ! Component: 2800 - total flux cleaned = -0.00403573 Jy ! Component: 2850 - total flux cleaned = -0.00410165 Jy ! Component: 2900 - total flux cleaned = -0.00423278 Jy ! Component: 2950 - total flux cleaned = -0.00431414 Jy ! Component: 3000 - total flux cleaned = -0.00439508 Jy ! Component: 3050 - total flux cleaned = -0.00447538 Jy ! Component: 3100 - total flux cleaned = -0.00458717 Jy ! Component: 3150 - total flux cleaned = -0.00468228 Jy ! Component: 3200 - total flux cleaned = -0.00477696 Jy ! Component: 3250 - total flux cleaned = -0.00487087 Jy ! Component: 3300 - total flux cleaned = -0.00494881 Jy ! Component: 3350 - total flux cleaned = -0.00494888 Jy ! Component: 3400 - total flux cleaned = -0.00507228 Jy ! Component: 3450 - total flux cleaned = -0.00513364 Jy ! Component: 3500 - total flux cleaned = -0.0051489 Jy ! Component: 3550 - total flux cleaned = -0.00522503 Jy ! Component: 3600 - total flux cleaned = -0.00530065 Jy ! Component: 3650 - total flux cleaned = -0.00534583 Jy ! Component: 3700 - total flux cleaned = -0.00537586 Jy ! Component: 3750 - total flux cleaned = -0.00546529 Jy ! Component: 3800 - total flux cleaned = -0.00549495 Jy ! Component: 3850 - total flux cleaned = -0.00549493 Jy ! Component: 3900 - total flux cleaned = -0.00553908 Jy ! Component: 3950 - total flux cleaned = -0.0055391 Jy ! Component: 4000 - total flux cleaned = -0.00559748 Jy ! Component: 4050 - total flux cleaned = -0.00559743 Jy ! Total flux subtracted in 4096 components = -0.00561193 Jy ! Clean residual min=-0.000772 max=0.000841 Jy/beam ! Clean residual mean=-0.000005 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.102496 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 338 components and 0.102496 Jy ![Exited script file: muppet] wmap "J1347-3750_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 9.224 at 5.469 degrees (North through East) ! Clean map min=-0.0021049 max=0.083548 Jy/beam ! Writing clean map to FITS file: J1347-3750_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0835478 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237715 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.853578 0.853578 1.70716 3.41431 6.82863 13.6573 27.3145 54.629 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 9.224 at 5.469 degrees (North through East) ! Clean map min=-0.0021049 max=0.083548 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1347-3750_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:42:47 2019