! Started logfile: J1345+3823_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:50:52 2019 obs J1345+3823_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1345+3823_S_2017_05_31_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.908625 visibilities/baseline/integration-bin. ! Found source: J1345+3823 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 23388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1345+3823_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.826674Jy sigma=0.007921 ! Fit after self-cal, rms=0.799760Jy sigma=0.007674 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=4.974 mas, bpa=-7.728 degrees ! Estimated noise=838.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15568 Jy ! Component: 100 - total flux cleaned = 0.231497 Jy ! Total flux subtracted in 100 components = 0.231497 Jy ! Clean residual min=-0.015706 max=0.039996 Jy/beam ! Clean residual mean=0.000084 rms=0.005047 Jy/beam ! Combined flux in latest and established models = 0.231497 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.231497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149539Jy sigma=0.001392 ! Fit after self-cal, rms=0.148874Jy sigma=0.001386 ! Inverting map ! Added new window around map position (-3.5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466271 Jy ! Component: 100 - total flux cleaned = 0.0784229 Jy ! Total flux subtracted in 100 components = 0.0784229 Jy ! Clean residual min=-0.011911 max=0.035431 Jy/beam ! Clean residual mean=0.000054 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 0.30992 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 62 components and 0.30992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123386Jy sigma=0.001087 ! Fit after self-cal, rms=0.123174Jy sigma=0.001085 ! Inverting map ! Added new window around map position (-24, 103). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331285 Jy ! Component: 100 - total flux cleaned = 0.05478 Jy ! Total flux subtracted in 100 components = 0.05478 Jy ! Clean residual min=-0.008861 max=0.015037 Jy/beam ! Clean residual mean=0.000047 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 0.3647 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.3647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110801Jy sigma=0.000935 ! Fit after self-cal, rms=0.109627Jy sigma=0.000924 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217045 Jy ! Component: 100 - total flux cleaned = 0.0370373 Jy ! Total flux subtracted in 100 components = 0.0370373 Jy ! Clean residual min=-0.006533 max=0.014123 Jy/beam ! Clean residual mean=0.000037 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 0.401738 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.401738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103138Jy sigma=0.000842 ! Fit after self-cal, rms=0.102881Jy sigma=0.000839 ! Inverting map ! Added new window around map position (-2, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151972 Jy ! Component: 100 - total flux cleaned = 0.0264394 Jy ! Total flux subtracted in 100 components = 0.0264394 Jy ! Clean residual min=-0.005277 max=0.008229 Jy/beam ! Clean residual mean=0.000029 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.428177 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 120 components and 0.428177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099366Jy sigma=0.000790 ! Fit after self-cal, rms=0.099224Jy sigma=0.000788 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=5.948 mas, bpa=-8.48 degrees ! Estimated noise=536.869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179672 Jy ! Component: 100 - total flux cleaned = 0.0308363 Jy ! Component: 150 - total flux cleaned = 0.0405608 Jy ! Component: 200 - total flux cleaned = 0.0482595 Jy ! Total flux subtracted in 200 components = 0.0482595 Jy ! Clean residual min=-0.005558 max=0.008990 Jy/beam ! Clean residual mean=0.000032 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.476436 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 160 components and 0.476437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095193Jy sigma=0.000732 ! Fit after self-cal, rms=0.095006Jy sigma=0.000730 ! Inverting map ! Added new window around map position (-10.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102996 Jy ! Component: 100 - total flux cleaned = 0.0168881 Jy ! Component: 150 - total flux cleaned = 0.0221548 Jy ! Component: 200 - total flux cleaned = 0.0265544 Jy ! Total flux subtracted in 200 components = 0.0265544 Jy ! Clean residual min=-0.004031 max=0.005083 Jy/beam ! Clean residual mean=0.000015 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.502991 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 208 components and 0.502991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093631Jy sigma=0.000712 ! Fit after self-cal, rms=0.093433Jy sigma=0.000710 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 0.97 KP 0.99 ! LA 0.96 MK 1.00 NL 0.94 OV 1.03 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.03 KP 0.95 ! LA 0.94 MK 1.04 NL 1.08 OV 1.07 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.03 KP 0.96 ! LA 0.97 MK 1.10 NL 1.02 OV 1.00 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.01 KP 1.00* ! LA 1.03 MK 1.18 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.093433Jy sigma=0.000710 ! Fit after self-cal, rms=0.093938Jy sigma=0.000692 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=6.025 mas, bpa=-8.388 degrees ! Estimated noise=544.057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395593 Jy ! Component: 100 - total flux cleaned = 0.00532975 Jy ! Component: 150 - total flux cleaned = 0.00665545 Jy ! Component: 200 - total flux cleaned = 0.007854 Jy ! Total flux subtracted in 200 components = 0.007854 Jy ! Clean residual min=-0.003362 max=0.003938 Jy/beam ! Clean residual mean=-0.000003 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.510845 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 232 components and 0.510845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093659Jy sigma=0.000689 ! Fit after self-cal, rms=0.093634Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093634Jy sigma=0.000689 ! Fit after self-cal, rms=0.083530Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=6.012 mas, bpa=-9.438 degrees ! Estimated noise=540.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241801 Jy ! Component: 100 - total flux cleaned = 0.0042619 Jy ! Component: 150 - total flux cleaned = 0.00559949 Jy ! Component: 200 - total flux cleaned = 0.00638049 Jy ! Total flux subtracted in 200 components = 0.00638049 Jy ! Clean residual min=-0.002790 max=0.003819 Jy/beam ! Clean residual mean=-0.000004 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.517225 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 255 components and 0.517226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083419Jy sigma=0.000681 ! Fit after self-cal, rms=0.083397Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, 39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287646 Jy ! Component: 100 - total flux cleaned = 0.00359825 Jy ! Component: 150 - total flux cleaned = 0.00419961 Jy ! Component: 200 - total flux cleaned = 0.00458224 Jy ! Total flux subtracted in 200 components = 0.00458224 Jy ! Clean residual min=-0.002478 max=0.002929 Jy/beam ! Clean residual mean=-0.000004 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.521808 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 283 components and 0.521808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083208Jy sigma=0.000679 ! Fit after self-cal, rms=0.083198Jy sigma=0.000679 ! Inverting map ! Added new window around map position (44.5, -69). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210387 Jy ! Component: 100 - total flux cleaned = 0.00302714 Jy ! Component: 150 - total flux cleaned = 0.003627 Jy ! Component: 200 - total flux cleaned = 0.00399497 Jy ! Total flux subtracted in 200 components = 0.00399497 Jy ! Clean residual min=-0.002427 max=0.002379 Jy/beam ! Clean residual mean=-0.000003 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.525803 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 314 components and 0.525803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083101Jy sigma=0.000678 ! Fit after self-cal, rms=0.083095Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083095Jy sigma=0.000678 ! Fit after self-cal, rms=0.087066Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=6.006 mas, bpa=-9.789 degrees ! Estimated noise=541.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165681 Jy ! Component: 100 - total flux cleaned = 0.00292717 Jy ! Component: 150 - total flux cleaned = 0.00350094 Jy ! Component: 200 - total flux cleaned = 0.00385947 Jy ! Total flux subtracted in 200 components = 0.00385947 Jy ! Clean residual min=-0.002360 max=0.002411 Jy/beam ! Clean residual mean=-0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.529662 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 338 components and 0.529662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086974Jy sigma=0.000678 ! Fit after self-cal, rms=0.086975Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544482 Jy ! Component: 100 - total flux cleaned = 0.000876944 Jy ! Component: 150 - total flux cleaned = 0.00123213 Jy ! Component: 200 - total flux cleaned = 0.00149563 Jy ! Total flux subtracted in 200 components = 0.00149563 Jy ! Clean residual min=-0.002313 max=0.002340 Jy/beam ! Clean residual mean=-0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.531158 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 347 components and 0.531158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086920Jy sigma=0.000677 ! Fit after self-cal, rms=0.086918Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086918Jy sigma=0.000677 ! Fit after self-cal, rms=0.087327Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.813 mas, bmaj=9.543 mas, bpa=-13.94 degrees ! Estimated noise=655.464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215456 Jy ! Component: 100 - total flux cleaned = 0.00325213 Jy ! Component: 150 - total flux cleaned = 0.00399169 Jy ! Component: 200 - total flux cleaned = 0.00446696 Jy ! Total flux subtracted in 200 components = 0.00446696 Jy ! Clean residual min=-0.003017 max=0.003021 Jy/beam ! Clean residual mean=-0.000004 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.535625 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 374 components and 0.535625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087277Jy sigma=0.000677 ! Fit after self-cal, rms=0.087267Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410249 Jy ! Component: 100 - total flux cleaned = 0.000691667 Jy ! Component: 150 - total flux cleaned = 0.000874897 Jy ! Component: 200 - total flux cleaned = 0.00108037 Jy ! Total flux subtracted in 200 components = 0.00108037 Jy ! Clean residual min=-0.002925 max=0.002850 Jy/beam ! Clean residual mean=-0.000004 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.536705 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 387 components and 0.536705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087227Jy sigma=0.000677 ! Fit after self-cal, rms=0.087220Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.579 mas, bmaj=6.006 mas, bpa=-9.986 degrees ! Estimated noise=541.684 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.579 x 6.006 at -9.986 degrees (North through East) ! Clean map min=-0.0022586 max=0.19132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=5.005 mas, bpa=-9.399 degrees ! Estimated noise=851.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.157672 Jy ! Component: 100 - total flux cleaned = 0.237166 Jy ! Component: 150 - total flux cleaned = 0.289754 Jy ! Component: 200 - total flux cleaned = 0.327609 Jy ! Total flux subtracted in 200 components = 0.327609 Jy ! Clean residual min=-0.009808 max=0.021868 Jy/beam ! Clean residual mean=0.000062 rms=0.003215 Jy/beam ! Combined flux in latest and established models = 0.327609 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.327609 Jy ! Inverting map and beam ! Estimated beam: bmin=3.579 mas, bmaj=6.006 mas, bpa=-9.986 degrees ! Estimated noise=541.684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451502 Jy ! Component: 100 - total flux cleaned = 0.0755237 Jy ! Component: 150 - total flux cleaned = 0.0983933 Jy ! Component: 200 - total flux cleaned = 0.116131 Jy ! Total flux subtracted in 200 components = 0.116131 Jy ! Clean residual min=-0.006058 max=0.011046 Jy/beam ! Clean residual mean=0.000053 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.443741 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 132 components and 0.443741 Jy ! Inverting map ! Added new window around map position (3.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141689 Jy ! Component: 100 - total flux cleaned = 0.0255912 Jy ! Component: 150 - total flux cleaned = 0.0349333 Jy ! Component: 200 - total flux cleaned = 0.0427644 Jy ! Total flux subtracted in 200 components = 0.0427644 Jy ! Clean residual min=-0.004412 max=0.005394 Jy/beam ! Clean residual mean=0.000024 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.486505 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 182 components and 0.486505 Jy ! Inverting map ! Added new window around map position (-2, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674831 Jy ! Component: 100 - total flux cleaned = 0.0124715 Jy ! Component: 150 - total flux cleaned = 0.0173927 Jy ! Component: 200 - total flux cleaned = 0.0216553 Jy ! Total flux subtracted in 200 components = 0.0216553 Jy ! Clean residual min=-0.003377 max=0.003235 Jy/beam ! Clean residual mean=0.000011 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.50816 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 235 components and 0.50816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.813 mas, bmaj=9.543 mas, bpa=-13.94 degrees ! Estimated noise=655.464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631273 Jy ! Component: 100 - total flux cleaned = 0.0106607 Jy ! Component: 150 - total flux cleaned = 0.0141106 Jy ! Component: 200 - total flux cleaned = 0.016955 Jy ! Total flux subtracted in 200 components = 0.016955 Jy ! Clean residual min=-0.003497 max=0.003598 Jy/beam ! Clean residual mean=0.000006 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.525115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239617 Jy ! Component: 100 - total flux cleaned = 0.00438036 Jy ! Component: 150 - total flux cleaned = 0.00547994 Jy ! Component: 200 - total flux cleaned = 0.00627904 Jy ! Total flux subtracted in 200 components = 0.00627904 Jy ! Clean residual min=-0.003160 max=0.003385 Jy/beam ! Clean residual mean=0.000003 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.531394 Jy ! Adding 135 model components to the UV plane model. ! The established model now contains 344 components and 0.531394 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.579 mas, bmaj=6.006 mas, bpa=-9.986 degrees ! Estimated noise=541.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000683688 Jy ! Component: 100 - total flux cleaned = 0.00094713 Jy ! Component: 150 - total flux cleaned = 0.00130647 Jy ! Component: 200 - total flux cleaned = 0.00157873 Jy ! Total flux subtracted in 200 components = 0.00157873 Jy ! Clean residual min=-0.002328 max=0.002415 Jy/beam ! Clean residual mean=0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.532973 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 372 components and 0.532973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087110Jy sigma=0.000677 ! Fit after self-cal, rms=0.087088Jy sigma=0.000677 wmodel J1345+3823_S_2017_05_31_pus_map.mod ! Writing 372 model components to file: J1345+3823_S_2017_05_31_pus_map.mod wobs J1345+3823_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1345+3823_S_2017_05_31_pus_uvs.fits wwins J1345+3823_S_2017_05_31_pus_map.win ! wwins: Wrote 9 windows to J1345+3823_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475058 Jy ! Component: 100 - total flux cleaned = 0.000874224 Jy ! Component: 150 - total flux cleaned = 0.00106157 Jy ! Component: 200 - total flux cleaned = 0.00131426 Jy ! Component: 250 - total flux cleaned = 0.0014884 Jy ! Component: 300 - total flux cleaned = 0.00169063 Jy ! Component: 350 - total flux cleaned = 0.00182082 Jy ! Component: 400 - total flux cleaned = 0.00185245 Jy ! Component: 450 - total flux cleaned = 0.0018833 Jy ! Component: 500 - total flux cleaned = 0.00197313 Jy ! Component: 550 - total flux cleaned = 0.00203162 Jy ! Component: 600 - total flux cleaned = 0.00217679 Jy ! Component: 650 - total flux cleaned = 0.00234742 Jy ! Component: 700 - total flux cleaned = 0.00240284 Jy ! Component: 750 - total flux cleaned = 0.00237549 Jy ! Component: 800 - total flux cleaned = 0.0023759 Jy ! Component: 850 - total flux cleaned = 0.0023491 Jy ! Component: 900 - total flux cleaned = 0.00232262 Jy ! Component: 950 - total flux cleaned = 0.00227072 Jy ! Component: 1000 - total flux cleaned = 0.00227049 Jy ! Component: 1050 - total flux cleaned = 0.00227066 Jy ! Component: 1100 - total flux cleaned = 0.0021958 Jy ! Component: 1150 - total flux cleaned = 0.00209738 Jy ! Component: 1200 - total flux cleaned = 0.00214623 Jy ! Component: 1250 - total flux cleaned = 0.00209784 Jy ! Component: 1300 - total flux cleaned = 0.00202675 Jy ! Component: 1350 - total flux cleaned = 0.00200364 Jy ! Component: 1400 - total flux cleaned = 0.00198043 Jy ! Component: 1450 - total flux cleaned = 0.0019351 Jy ! Component: 1500 - total flux cleaned = 0.00193501 Jy ! Component: 1550 - total flux cleaned = 0.00191241 Jy ! Component: 1600 - total flux cleaned = 0.00193458 Jy ! Component: 1650 - total flux cleaned = 0.00182568 Jy ! Component: 1700 - total flux cleaned = 0.00193436 Jy ! Component: 1750 - total flux cleaned = 0.00197699 Jy ! Component: 1800 - total flux cleaned = 0.00201911 Jy ! Component: 1850 - total flux cleaned = 0.0019773 Jy ! Component: 1900 - total flux cleaned = 0.00203923 Jy ! Component: 1950 - total flux cleaned = 0.00195704 Jy ! Component: 2000 - total flux cleaned = 0.00201829 Jy ! Component: 2050 - total flux cleaned = 0.00203843 Jy ! Component: 2100 - total flux cleaned = 0.00201856 Jy ! Component: 2150 - total flux cleaned = 0.00205823 Jy ! Component: 2200 - total flux cleaned = 0.00207822 Jy ! Component: 2250 - total flux cleaned = 0.00203942 Jy ! Component: 2300 - total flux cleaned = 0.00207792 Jy ! Component: 2350 - total flux cleaned = 0.00205902 Jy ! Component: 2400 - total flux cleaned = 0.00200265 Jy ! Component: 2450 - total flux cleaned = 0.00200296 Jy ! Component: 2500 - total flux cleaned = 0.00205852 Jy ! Component: 2550 - total flux cleaned = 0.00204011 Jy ! Component: 2600 - total flux cleaned = 0.00204017 Jy ! Component: 2650 - total flux cleaned = 0.00191333 Jy ! Component: 2700 - total flux cleaned = 0.00198511 Jy ! Component: 2750 - total flux cleaned = 0.00196742 Jy ! Component: 2800 - total flux cleaned = 0.00198517 Jy ! Component: 2850 - total flux cleaned = 0.00198499 Jy ! Component: 2900 - total flux cleaned = 0.00188101 Jy ! Component: 2950 - total flux cleaned = 0.00193246 Jy ! Component: 3000 - total flux cleaned = 0.00189865 Jy ! Component: 3050 - total flux cleaned = 0.00188169 Jy ! Component: 3100 - total flux cleaned = 0.00186529 Jy ! Component: 3150 - total flux cleaned = 0.00183183 Jy ! Component: 3200 - total flux cleaned = 0.00184833 Jy ! Component: 3250 - total flux cleaned = 0.00178299 Jy ! Component: 3300 - total flux cleaned = 0.0017993 Jy ! Component: 3350 - total flux cleaned = 0.0017352 Jy ! Component: 3400 - total flux cleaned = 0.00178311 Jy ! Component: 3450 - total flux cleaned = 0.00175137 Jy ! Component: 3500 - total flux cleaned = 0.00179854 Jy ! Component: 3550 - total flux cleaned = 0.00184542 Jy ! Component: 3600 - total flux cleaned = 0.00186078 Jy ! Component: 3650 - total flux cleaned = 0.00184548 Jy ! Component: 3700 - total flux cleaned = 0.00189125 Jy ! Component: 3750 - total flux cleaned = 0.00190641 Jy ! Component: 3800 - total flux cleaned = 0.0019213 Jy ! Component: 3850 - total flux cleaned = 0.00190642 Jy ! Component: 3900 - total flux cleaned = 0.00189166 Jy ! Component: 3950 - total flux cleaned = 0.00190635 Jy ! Component: 4000 - total flux cleaned = 0.0019355 Jy ! Component: 4050 - total flux cleaned = 0.00196428 Jy ! Total flux subtracted in 4096 components = 0.00190694 Jy ! Clean residual min=-0.000882 max=0.000724 Jy/beam ! Clean residual mean=-0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.53488 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 714 components and 0.534881 Jy ![Exited script file: muppet] wmap "J1345+3823_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.579 x 6.006 at -9.986 degrees (North through East) ! Clean map min=-0.0015123 max=0.1915 Jy/beam ! Writing clean map to FITS file: J1345+3823_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.191503 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000278152 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.43574 0.43574 0.87148 1.74296 3.48592 6.97184 13.9437 27.8874 55.7747 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.191 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.579 x 6.006 at -9.986 degrees (North through East) ! Clean map min=-0.0015123 max=0.1915 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1345+3823_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:50:58 2019