! Started logfile: J1344-1723_S_2017_02_24_pus_uvs.log on Sat May 4 11:28:32 2019 obs J1344-1723_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1344-1723_S_2017_02_24_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969852 visibilities/baseline/integration-bin. ! Found source: J1344-1723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 24964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1344-1723_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.745469Jy sigma=0.032531 ! Fit after self-cal, rms=0.737699Jy sigma=0.032505 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=7.455 mas, bpa=-8.062 degrees ! Estimated noise=775.922 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138772 Jy ! Component: 100 - total flux cleaned = 0.151506 Jy ! Total flux subtracted in 100 components = 0.151506 Jy ! Clean residual min=-0.050488 max=0.052420 Jy/beam ! Clean residual mean=-0.000043 rms=0.016581 Jy/beam ! Combined flux in latest and established models = 0.151506 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.151506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159783Jy sigma=0.004918 ! Fit after self-cal, rms=0.159731Jy sigma=0.004917 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=8.827 mas, bpa=-7.618 degrees ! Estimated noise=443.853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154382 Jy ! Component: 100 - total flux cleaned = 0.0131663 Jy ! Component: 150 - total flux cleaned = 0.0113007 Jy ! Component: 200 - total flux cleaned = 0.0100641 Jy ! Total flux subtracted in 200 components = 0.0100641 Jy ! Clean residual min=-0.047646 max=0.055020 Jy/beam ! Clean residual mean=-0.000057 rms=0.015197 Jy/beam ! Combined flux in latest and established models = 0.16157 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.16157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145282Jy sigma=0.005361 ! Fit after self-cal, rms=0.145228Jy sigma=0.005361 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.75 HN 0.99 KP 0.72 ! LA 0.72 MK 0.94 NL 0.78 OV 0.80 ! PT 0.75 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.70 HN 1.02 KP 0.70 ! LA 0.69 MK 0.93 NL 0.80 OV 0.82 ! PT 0.74 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.74 HN 0.97 KP 0.78 ! LA 0.75 MK 0.96 NL 0.90 OV 0.75 ! PT 0.73 SC 1.11 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.79 HN 1.03 KP 1.00* ! LA 34.73 MK 1.01 NL 1.00* OV 0.76 ! PT 0.77 SC 1.00* ! ! ! Fit before self-cal, rms=0.145228Jy sigma=0.005361 ! Fit after self-cal, rms=2.030126Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=8.598 mas, bpa=-4.879 degrees ! Estimated noise=447.072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00765481 Jy ! Component: 100 - total flux cleaned = 0.0114895 Jy ! Component: 150 - total flux cleaned = 0.01211 Jy ! Component: 200 - total flux cleaned = 0.0123233 Jy ! Total flux subtracted in 200 components = 0.0123233 Jy ! Clean residual min=-0.005662 max=0.006236 Jy/beam ! Clean residual mean=-0.000004 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.173893 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.173893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.029316Jy sigma=0.000770 ! Fit after self-cal, rms=2.029491Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.029491Jy sigma=0.000757 ! Fit after self-cal, rms=1.235801Jy sigma=0.000721 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=8.488 mas, bpa=-4.747 degrees ! Estimated noise=452.309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00515849 Jy ! Component: 100 - total flux cleaned = 0.00790077 Jy ! Component: 150 - total flux cleaned = 0.00835134 Jy ! Component: 200 - total flux cleaned = 0.00841628 Jy ! Total flux subtracted in 200 components = 0.00841628 Jy ! Clean residual min=-0.003754 max=0.004420 Jy/beam ! Clean residual mean=0.000006 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.18231 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.18231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.235305Jy sigma=0.000719 ! Fit after self-cal, rms=1.235306Jy sigma=0.000719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-68.5, 103). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366678 Jy ! Component: 100 - total flux cleaned = 0.00430107 Jy ! Component: 150 - total flux cleaned = 0.00457571 Jy ! Component: 200 - total flux cleaned = 0.00469863 Jy ! Total flux subtracted in 200 components = 0.00469863 Jy ! Clean residual min=-0.003717 max=0.003915 Jy/beam ! Clean residual mean=0.000006 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.187008 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.187008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.234835Jy sigma=0.000718 ! Fit after self-cal, rms=1.234832Jy sigma=0.000718 ! Inverting map ! Added new window around map position (-19, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258013 Jy ! Component: 100 - total flux cleaned = 0.00311493 Jy ! Component: 150 - total flux cleaned = 0.00348928 Jy ! Component: 200 - total flux cleaned = 0.00375795 Jy ! Total flux subtracted in 200 components = 0.00375795 Jy ! Clean residual min=-0.003344 max=0.003724 Jy/beam ! Clean residual mean=0.000007 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.190766 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.190766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.234497Jy sigma=0.000717 ! Fit after self-cal, rms=1.234497Jy sigma=0.000717 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.234497Jy sigma=0.000717 ! Fit after self-cal, rms=0.074487Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=8.439 mas, bpa=-4.564 degrees ! Estimated noise=452.336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163308 Jy ! Component: 100 - total flux cleaned = 0.0014236 Jy ! Component: 150 - total flux cleaned = 0.00108183 Jy ! Component: 200 - total flux cleaned = 0.000779271 Jy ! Total flux subtracted in 200 components = 0.000779271 Jy ! Clean residual min=-0.001769 max=0.001919 Jy/beam ! Clean residual mean=0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.191546 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 0.191546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074344Jy sigma=0.000673 ! Fit after self-cal, rms=0.074298Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, 83). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822452 Jy ! Component: 100 - total flux cleaned = 0.000724979 Jy ! Component: 150 - total flux cleaned = 0.000541968 Jy ! Component: 200 - total flux cleaned = 0.000457117 Jy ! Total flux subtracted in 200 components = 0.000457117 Jy ! Clean residual min=-0.001587 max=0.001728 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.192003 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 130 components and 0.192003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074220Jy sigma=0.000672 ! Fit after self-cal, rms=0.074216Jy sigma=0.000672 ! Inverting map ! Added new window around map position (-11, -48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000343817 Jy ! Component: 100 - total flux cleaned = -3.67773e-05 Jy ! Component: 150 - total flux cleaned = -0.000288966 Jy ! Component: 200 - total flux cleaned = -0.000328521 Jy ! Total flux subtracted in 200 components = -0.000328521 Jy ! Clean residual min=-0.001377 max=0.001594 Jy/beam ! Clean residual mean=0.000001 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.191674 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 152 components and 0.191674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074143Jy sigma=0.000671 ! Fit after self-cal, rms=0.074141Jy sigma=0.000671 ! Inverting map ! Added new window around map position (18.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735048 Jy ! Component: 100 - total flux cleaned = 0.0006202 Jy ! Component: 150 - total flux cleaned = 0.00051128 Jy ! Component: 200 - total flux cleaned = 0.000405308 Jy ! Total flux subtracted in 200 components = 0.000405308 Jy ! Clean residual min=-0.001298 max=0.001481 Jy/beam ! Clean residual mean=0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.192079 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 170 components and 0.19208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074086Jy sigma=0.000671 ! Fit after self-cal, rms=0.074086Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074086Jy sigma=0.000671 ! Fit after self-cal, rms=0.073661Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=16.43 mas, bpa=3.196 degrees ! Estimated noise=525.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514926 Jy ! Component: 100 - total flux cleaned = 0.000343531 Jy ! Component: 150 - total flux cleaned = 0.000171761 Jy ! Component: 200 - total flux cleaned = 4.3501e-05 Jy ! Total flux subtracted in 200 components = 4.3501e-05 Jy ! Clean residual min=-0.001175 max=0.001181 Jy/beam ! Clean residual mean=0.000003 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.192123 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 201 components and 0.192123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073637Jy sigma=0.000670 ! Fit after self-cal, rms=0.073625Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.52123e-05 Jy ! Component: 100 - total flux cleaned = 4.04481e-05 Jy ! Component: 150 - total flux cleaned = -5.00197e-05 Jy ! Component: 200 - total flux cleaned = -0.000156281 Jy ! Total flux subtracted in 200 components = -0.000156281 Jy ! Clean residual min=-0.001156 max=0.001108 Jy/beam ! Clean residual mean=0.000002 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.191967 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 214 components and 0.191967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073616Jy sigma=0.000670 ! Fit after self-cal, rms=0.073616Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=8.411 mas, bpa=-4.449 degrees ! Estimated noise=452.509 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.385 x 8.411 at -4.449 degrees (North through East) ! Clean map min=-0.0024818 max=0.19115 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=7.045 mas, bpa=-4.684 degrees ! Estimated noise=839.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150599 Jy ! Component: 100 - total flux cleaned = 0.183475 Jy ! Component: 150 - total flux cleaned = 0.186144 Jy ! Component: 200 - total flux cleaned = 0.187494 Jy ! Total flux subtracted in 200 components = 0.187494 Jy ! Clean residual min=-0.003707 max=0.004158 Jy/beam ! Clean residual mean=-0.000001 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.187494 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.187494 Jy ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=8.411 mas, bpa=-4.449 degrees ! Estimated noise=452.509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465899 Jy ! Component: 100 - total flux cleaned = 0.00116249 Jy ! Component: 150 - total flux cleaned = 0.00156455 Jy ! Component: 200 - total flux cleaned = 0.00202107 Jy ! Total flux subtracted in 200 components = 0.00202107 Jy ! Clean residual min=-0.001954 max=0.001816 Jy/beam ! Clean residual mean=0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.189515 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 0.189515 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=16.43 mas, bpa=3.196 degrees ! Estimated noise=525.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464728 Jy ! Component: 100 - total flux cleaned = 0.000804976 Jy ! Component: 150 - total flux cleaned = 0.00111571 Jy ! Component: 200 - total flux cleaned = 0.00140516 Jy ! Total flux subtracted in 200 components = 0.00140516 Jy ! Clean residual min=-0.001411 max=0.001416 Jy/beam ! Clean residual mean=0.000002 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.19092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180764 Jy ! Component: 100 - total flux cleaned = 0.000390462 Jy ! Component: 150 - total flux cleaned = 0.000429735 Jy ! Component: 200 - total flux cleaned = 0.000430477 Jy ! Total flux subtracted in 200 components = 0.000430477 Jy ! Clean residual min=-0.001345 max=0.001400 Jy/beam ! Clean residual mean=0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.191351 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 77 components and 0.191351 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=8.411 mas, bpa=-4.449 degrees ! Estimated noise=452.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461188 Jy ! Component: 100 - total flux cleaned = -0.00061295 Jy ! Component: 150 - total flux cleaned = -0.000549203 Jy ! Component: 200 - total flux cleaned = -0.0004193 Jy ! Total flux subtracted in 200 components = -0.0004193 Jy ! Clean residual min=-0.001524 max=0.001566 Jy/beam ! Clean residual mean=0.000001 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.190932 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 94 components and 0.190932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073969Jy sigma=0.000673 ! Fit after self-cal, rms=0.073972Jy sigma=0.000672 wmodel J1344-1723_S_2017_02_24_pus_map.mod ! Writing 94 model components to file: J1344-1723_S_2017_02_24_pus_map.mod wobs J1344-1723_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1344-1723_S_2017_02_24_pus_uvs.fits wwins J1344-1723_S_2017_02_24_pus_map.win ! wwins: Wrote 7 windows to J1344-1723_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410914 Jy ! Component: 100 - total flux cleaned = 0.000787643 Jy ! Component: 150 - total flux cleaned = 0.00109924 Jy ! Component: 200 - total flux cleaned = 0.0014517 Jy ! Component: 250 - total flux cleaned = 0.00177 Jy ! Component: 300 - total flux cleaned = 0.0020093 Jy ! Component: 350 - total flux cleaned = 0.0022439 Jy ! Component: 400 - total flux cleaned = 0.00245102 Jy ! Component: 450 - total flux cleaned = 0.0026548 Jy ! Component: 500 - total flux cleaned = 0.00283247 Jy ! Component: 550 - total flux cleaned = 0.00294188 Jy ! Component: 600 - total flux cleaned = 0.00305005 Jy ! Component: 650 - total flux cleaned = 0.00319884 Jy ! Component: 700 - total flux cleaned = 0.0032828 Jy ! Component: 750 - total flux cleaned = 0.00338605 Jy ! Component: 800 - total flux cleaned = 0.0035087 Jy ! Component: 850 - total flux cleaned = 0.00356935 Jy ! Component: 900 - total flux cleaned = 0.00364923 Jy ! Component: 950 - total flux cleaned = 0.00374798 Jy ! Component: 1000 - total flux cleaned = 0.00378705 Jy ! Component: 1050 - total flux cleaned = 0.00380634 Jy ! Component: 1100 - total flux cleaned = 0.00384456 Jy ! Component: 1150 - total flux cleaned = 0.00386331 Jy ! Component: 1200 - total flux cleaned = 0.00390078 Jy ! Component: 1250 - total flux cleaned = 0.00384475 Jy ! Component: 1300 - total flux cleaned = 0.00386324 Jy ! Component: 1350 - total flux cleaned = 0.00384512 Jy ! Component: 1400 - total flux cleaned = 0.00380907 Jy ! Component: 1450 - total flux cleaned = 0.00388054 Jy ! Component: 1500 - total flux cleaned = 0.00382734 Jy ! Component: 1550 - total flux cleaned = 0.00384496 Jy ! Component: 1600 - total flux cleaned = 0.00387983 Jy ! Component: 1650 - total flux cleaned = 0.00384539 Jy ! Component: 1700 - total flux cleaned = 0.00391398 Jy ! Component: 1750 - total flux cleaned = 0.00389696 Jy ! Component: 1800 - total flux cleaned = 0.00389696 Jy ! Component: 1850 - total flux cleaned = 0.00398057 Jy ! Component: 1900 - total flux cleaned = 0.0039473 Jy ! Component: 1950 - total flux cleaned = 0.00396379 Jy ! Component: 2000 - total flux cleaned = 0.00402905 Jy ! Component: 2050 - total flux cleaned = 0.00396417 Jy ! Component: 2100 - total flux cleaned = 0.00402842 Jy ! Component: 2150 - total flux cleaned = 0.00398077 Jy ! Component: 2200 - total flux cleaned = 0.00404423 Jy ! Component: 2250 - total flux cleaned = 0.00405984 Jy ! Component: 2300 - total flux cleaned = 0.00409106 Jy ! Component: 2350 - total flux cleaned = 0.00409094 Jy ! Component: 2400 - total flux cleaned = 0.0040756 Jy ! Component: 2450 - total flux cleaned = 0.00413656 Jy ! Component: 2500 - total flux cleaned = 0.0041062 Jy ! Component: 2550 - total flux cleaned = 0.00413633 Jy ! Component: 2600 - total flux cleaned = 0.00412157 Jy ! Component: 2650 - total flux cleaned = 0.00412164 Jy ! Component: 2700 - total flux cleaned = 0.00412157 Jy ! Component: 2750 - total flux cleaned = 0.00413621 Jy ! Component: 2800 - total flux cleaned = 0.00413618 Jy ! Component: 2850 - total flux cleaned = 0.00415073 Jy ! Component: 2900 - total flux cleaned = 0.00415078 Jy ! Component: 2950 - total flux cleaned = 0.00416487 Jy ! Component: 3000 - total flux cleaned = 0.00415079 Jy ! Component: 3050 - total flux cleaned = 0.00409471 Jy ! Component: 3100 - total flux cleaned = 0.00410873 Jy ! Component: 3150 - total flux cleaned = 0.00410883 Jy ! Component: 3200 - total flux cleaned = 0.00405405 Jy ! Component: 3250 - total flux cleaned = 0.00408124 Jy ! Component: 3300 - total flux cleaned = 0.00410849 Jy ! Component: 3350 - total flux cleaned = 0.00409502 Jy ! Component: 3400 - total flux cleaned = 0.00410839 Jy ! Component: 3450 - total flux cleaned = 0.00406866 Jy ! Component: 3500 - total flux cleaned = 0.0041479 Jy ! Component: 3550 - total flux cleaned = 0.00412176 Jy ! Component: 3600 - total flux cleaned = 0.00413489 Jy ! Component: 3650 - total flux cleaned = 0.00403113 Jy ! Component: 3700 - total flux cleaned = 0.00410851 Jy ! Component: 3750 - total flux cleaned = 0.00404454 Jy ! Component: 3800 - total flux cleaned = 0.00401906 Jy ! Component: 3850 - total flux cleaned = 0.00404441 Jy ! Component: 3900 - total flux cleaned = 0.00399405 Jy ! Component: 3950 - total flux cleaned = 0.00400646 Jy ! Component: 4000 - total flux cleaned = 0.00398159 Jy ! Component: 4050 - total flux cleaned = 0.00391973 Jy ! Total flux subtracted in 4096 components = 0.00396888 Jy ! Clean residual min=-0.000744 max=0.000695 Jy/beam ! Clean residual mean=-0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.1949 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 356 components and 0.1949 Jy ![Exited script file: muppet] wmap "J1344-1723_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.385 x 8.411 at -4.449 degrees (North through East) ! Clean map min=-0.0017664 max=0.19004 Jy/beam ! Writing clean map to FITS file: J1344-1723_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.190038 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224641 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.354625 0.354625 0.70925 1.4185 2.837 5.674 11.348 22.696 45.392 90.784 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.19 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.385 x 8.411 at -4.449 degrees (North through East) ! Clean map min=-0.0017664 max=0.19004 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1344-1723_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:28:37 2019