! Started logfile: J1343-1747_S_2017_02_24_pus_uvs.log on Sat May 4 11:28:26 2019 obs J1343-1747_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1343-1747_S_2017_02_24_pus_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.868873 visibilities/baseline/integration-bin. ! Found source: J1343-1747 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 22052 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1343-1747_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.590044Jy sigma=0.004242 ! Fit after self-cal, rms=0.576030Jy sigma=0.004154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=6.8 mas, bpa=-3.739 degrees ! Estimated noise=1129.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314765 Jy ! Component: 100 - total flux cleaned = 0.425357 Jy ! Total flux subtracted in 100 components = 0.425357 Jy ! Clean residual min=-0.020657 max=0.071394 Jy/beam ! Clean residual mean=0.000054 rms=0.006808 Jy/beam ! Combined flux in latest and established models = 0.425357 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.425357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230901Jy sigma=0.001416 ! Fit after self-cal, rms=0.230490Jy sigma=0.001413 ! Inverting map ! Added new window around map position (3, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0752545 Jy ! Component: 100 - total flux cleaned = 0.120043 Jy ! Total flux subtracted in 100 components = 0.120043 Jy ! Clean residual min=-0.013771 max=0.032545 Jy/beam ! Clean residual mean=0.000016 rms=0.003995 Jy/beam ! Combined flux in latest and established models = 0.5454 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.5454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183910Jy sigma=0.000996 ! Fit after self-cal, rms=0.182744Jy sigma=0.000985 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333801 Jy ! Component: 100 - total flux cleaned = 0.0542384 Jy ! Total flux subtracted in 100 components = 0.0542384 Jy ! Clean residual min=-0.010448 max=0.016092 Jy/beam ! Clean residual mean=0.000000 rms=0.002990 Jy/beam ! Combined flux in latest and established models = 0.599638 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.599638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169405Jy sigma=0.000868 ! Fit after self-cal, rms=0.169090Jy sigma=0.000864 ! Inverting map ! Added new window around map position (-3, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187179 Jy ! Component: 100 - total flux cleaned = 0.0312679 Jy ! Total flux subtracted in 100 components = 0.0312679 Jy ! Clean residual min=-0.009836 max=0.013475 Jy/beam ! Clean residual mean=-0.000009 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 0.630906 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.630906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163958Jy sigma=0.000825 ! Fit after self-cal, rms=0.163879Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=8.216 mas, bpa=-4.689 degrees ! Estimated noise=703.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206975 Jy ! Component: 100 - total flux cleaned = 0.0329433 Jy ! Component: 150 - total flux cleaned = 0.0405855 Jy ! Component: 200 - total flux cleaned = 0.0455748 Jy ! Total flux subtracted in 200 components = 0.0455748 Jy ! Clean residual min=-0.009067 max=0.011221 Jy/beam ! Clean residual mean=-0.000022 rms=0.002551 Jy/beam ! Combined flux in latest and established models = 0.676481 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 77 components and 0.676481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159324Jy sigma=0.000803 ! Fit after self-cal, rms=0.159308Jy sigma=0.000803 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.08 KP 0.99 ! LA 0.98 MK 0.97 NL 0.99 OV 1.05 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.12 KP 0.95 ! LA 0.94 MK 0.97 NL 0.98 OV 1.09 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.08 KP 1.04 ! LA 1.03 MK 1.01 NL 1.07 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.04 KP 1.00* ! LA 0.77 MK 1.09 NL 1.00* OV 1.02 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.159308Jy sigma=0.000803 ! Fit after self-cal, rms=0.132414Jy sigma=0.000757 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=8.178 mas, bpa=-4.364 degrees ! Estimated noise=706.415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000787333 Jy ! Component: 100 - total flux cleaned = -0.00108281 Jy ! Component: 150 - total flux cleaned = -0.00131219 Jy ! Component: 200 - total flux cleaned = -0.00140393 Jy ! Total flux subtracted in 200 components = -0.00140393 Jy ! Clean residual min=-0.006161 max=0.007471 Jy/beam ! Clean residual mean=-0.000020 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 0.675077 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 0.675077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132130Jy sigma=0.000754 ! Fit after self-cal, rms=0.132091Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132091Jy sigma=0.000754 ! Fit after self-cal, rms=0.131408Jy sigma=0.000715 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=8.164 mas, bpa=-4.467 degrees ! Estimated noise=708.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336624 Jy ! Component: 100 - total flux cleaned = 0.00337302 Jy ! Component: 150 - total flux cleaned = 0.00330557 Jy ! Component: 200 - total flux cleaned = 0.00318853 Jy ! Total flux subtracted in 200 components = 0.00318853 Jy ! Clean residual min=-0.004075 max=0.003797 Jy/beam ! Clean residual mean=-0.000004 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.678266 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.678266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131200Jy sigma=0.000714 ! Fit after self-cal, rms=0.131237Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.21517e-06 Jy ! Component: 100 - total flux cleaned = -0.0001008 Jy ! Component: 150 - total flux cleaned = -0.000145753 Jy ! Component: 200 - total flux cleaned = -0.000230619 Jy ! Total flux subtracted in 200 components = -0.000230619 Jy ! Clean residual min=-0.004035 max=0.003767 Jy/beam ! Clean residual mean=-0.000004 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.678035 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.678035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131201Jy sigma=0.000714 ! Fit after self-cal, rms=0.131195Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131195Jy sigma=0.000714 ! Fit after self-cal, rms=0.123845Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=8.158 mas, bpa=-4.448 degrees ! Estimated noise=710.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187875 Jy ! Component: 100 - total flux cleaned = 0.00187872 Jy ! Component: 150 - total flux cleaned = 0.0018295 Jy ! Component: 200 - total flux cleaned = 0.00178694 Jy ! Total flux subtracted in 200 components = 0.00178694 Jy ! Clean residual min=-0.003101 max=0.003615 Jy/beam ! Clean residual mean=-0.000000 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.679822 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.679822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123755Jy sigma=0.000709 ! Fit after self-cal, rms=0.123745Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175191 Jy ! Component: 100 - total flux cleaned = 0.00212903 Jy ! Component: 150 - total flux cleaned = 0.0021281 Jy ! Component: 200 - total flux cleaned = 0.00222521 Jy ! Total flux subtracted in 200 components = 0.00222521 Jy ! Clean residual min=-0.002992 max=0.003156 Jy/beam ! Clean residual mean=-0.000000 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.682047 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 0.682047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123623Jy sigma=0.000708 ! Fit after self-cal, rms=0.123621Jy sigma=0.000708 ! Inverting map ! Added new window around map position (30, 61.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905295 Jy ! Component: 100 - total flux cleaned = 0.000826825 Jy ! Component: 150 - total flux cleaned = 0.000705033 Jy ! Component: 200 - total flux cleaned = 0.000707509 Jy ! Total flux subtracted in 200 components = 0.000707509 Jy ! Clean residual min=-0.002941 max=0.002438 Jy/beam ! Clean residual mean=-0.000000 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.682755 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 152 components and 0.682755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123522Jy sigma=0.000707 ! Fit after self-cal, rms=0.123519Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123519Jy sigma=0.000707 ! Fit after self-cal, rms=0.123871Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.916 mas, bmaj=15.91 mas, bpa=4.971 degrees ! Estimated noise=889.841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106689 Jy ! Component: 100 - total flux cleaned = 0.000927142 Jy ! Component: 150 - total flux cleaned = 0.000709317 Jy ! Component: 200 - total flux cleaned = 0.00058209 Jy ! Total flux subtracted in 200 components = 0.00058209 Jy ! Clean residual min=-0.002835 max=0.002747 Jy/beam ! Clean residual mean=-0.000001 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.683337 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 171 components and 0.683337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123782Jy sigma=0.000707 ! Fit after self-cal, rms=0.123778Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.05482e-05 Jy ! Component: 100 - total flux cleaned = -3.06382e-05 Jy ! Component: 150 - total flux cleaned = -0.000116599 Jy ! Component: 200 - total flux cleaned = -0.000195151 Jy ! Total flux subtracted in 200 components = -0.000195151 Jy ! Clean residual min=-0.002842 max=0.002820 Jy/beam ! Clean residual mean=-0.000002 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.683142 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 180 components and 0.683142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123761Jy sigma=0.000707 ! Fit after self-cal, rms=0.123761Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=8.146 mas, bpa=-4.434 degrees ! Estimated noise=712.004 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 8.146 at -4.434 degrees (North through East) ! Clean map min=-0.0028358 max=0.4242 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=6.725 mas, bpa=-3.371 degrees ! Estimated noise=1148.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.320965 Jy ! Component: 100 - total flux cleaned = 0.445357 Jy ! Component: 150 - total flux cleaned = 0.518653 Jy ! Component: 200 - total flux cleaned = 0.565789 Jy ! Total flux subtracted in 200 components = 0.565789 Jy ! Clean residual min=-0.008835 max=0.025050 Jy/beam ! Clean residual mean=0.000027 rms=0.002889 Jy/beam ! Combined flux in latest and established models = 0.565789 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.565789 Jy ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=8.146 mas, bpa=-4.434 degrees ! Estimated noise=712.004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495544 Jy ! Component: 100 - total flux cleaned = 0.075145 Jy ! Component: 150 - total flux cleaned = 0.0898837 Jy ! Component: 200 - total flux cleaned = 0.0990018 Jy ! Total flux subtracted in 200 components = 0.0990018 Jy ! Clean residual min=-0.003210 max=0.005253 Jy/beam ! Clean residual mean=0.000002 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.664791 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 108 components and 0.66479 Jy ! Inverting map ! Added new window around map position (-3, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603772 Jy ! Component: 100 - total flux cleaned = 0.0104218 Jy ! Component: 150 - total flux cleaned = 0.0130762 Jy ! Component: 200 - total flux cleaned = 0.0150684 Jy ! Total flux subtracted in 200 components = 0.0150684 Jy ! Clean residual min=-0.002953 max=0.002493 Jy/beam ! Clean residual mean=0.000001 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.679859 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 141 components and 0.679859 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.916 mas, bmaj=15.91 mas, bpa=4.971 degrees ! Estimated noise=889.841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227441 Jy ! Component: 100 - total flux cleaned = 0.00319487 Jy ! Component: 150 - total flux cleaned = 0.00336991 Jy ! Component: 200 - total flux cleaned = 0.00357066 Jy ! Total flux subtracted in 200 components = 0.00357066 Jy ! Clean residual min=-0.002724 max=0.002834 Jy/beam ! Clean residual mean=0.000001 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.683429 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130593 Jy ! Component: 100 - total flux cleaned = 0.000170791 Jy ! Component: 150 - total flux cleaned = 0.000100836 Jy ! Component: 200 - total flux cleaned = 6.87715e-05 Jy ! Total flux subtracted in 200 components = 6.87715e-05 Jy ! Clean residual min=-0.002678 max=0.002825 Jy/beam ! Clean residual mean=0.000000 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.683498 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 213 components and 0.683498 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=8.146 mas, bpa=-4.434 degrees ! Estimated noise=712.004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303746 Jy ! Component: 100 - total flux cleaned = 0.000492582 Jy ! Component: 150 - total flux cleaned = 0.000494413 Jy ! Component: 200 - total flux cleaned = 0.000442095 Jy ! Total flux subtracted in 200 components = 0.000442095 Jy ! Clean residual min=-0.002649 max=0.002234 Jy/beam ! Clean residual mean=-0.000000 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.68394 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 235 components and 0.68394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123749Jy sigma=0.000707 ! Fit after self-cal, rms=0.123727Jy sigma=0.000707 wmodel J1343-1747_S_2017_02_24_pus_map.mod ! Writing 235 model components to file: J1343-1747_S_2017_02_24_pus_map.mod wobs J1343-1747_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1343-1747_S_2017_02_24_pus_uvs.fits wwins J1343-1747_S_2017_02_24_pus_map.win ! wwins: Wrote 6 windows to J1343-1747_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000832931 Jy ! Component: 100 - total flux cleaned = -0.00107732 Jy ! Component: 150 - total flux cleaned = -0.00130991 Jy ! Component: 200 - total flux cleaned = -0.00172115 Jy ! Component: 250 - total flux cleaned = -0.00211969 Jy ! Component: 300 - total flux cleaned = -0.00254203 Jy ! Component: 350 - total flux cleaned = -0.00288531 Jy ! Component: 400 - total flux cleaned = -0.00312047 Jy ! Component: 450 - total flux cleaned = -0.00341626 Jy ! Component: 500 - total flux cleaned = -0.00370519 Jy ! Component: 550 - total flux cleaned = -0.00401881 Jy ! Component: 600 - total flux cleaned = -0.00420339 Jy ! Component: 650 - total flux cleaned = -0.00444615 Jy ! Component: 700 - total flux cleaned = -0.00477388 Jy ! Component: 750 - total flux cleaned = -0.00500775 Jy ! Component: 800 - total flux cleaned = -0.00515214 Jy ! Component: 850 - total flux cleaned = -0.00538024 Jy ! Component: 900 - total flux cleaned = -0.00552071 Jy ! Component: 950 - total flux cleaned = -0.00565926 Jy ! Component: 1000 - total flux cleaned = -0.00579592 Jy ! Component: 1050 - total flux cleaned = -0.00587703 Jy ! Component: 1100 - total flux cleaned = -0.00603737 Jy ! Component: 1150 - total flux cleaned = -0.00622194 Jy ! Component: 1200 - total flux cleaned = -0.00637804 Jy ! Component: 1250 - total flux cleaned = -0.00658332 Jy ! Component: 1300 - total flux cleaned = -0.00665924 Jy ! Component: 1350 - total flux cleaned = -0.00678493 Jy ! Component: 1400 - total flux cleaned = -0.00695861 Jy ! Component: 1450 - total flux cleaned = -0.00705686 Jy ! Component: 1500 - total flux cleaned = -0.00708099 Jy ! Component: 1550 - total flux cleaned = -0.00715319 Jy ! Component: 1600 - total flux cleaned = -0.00729592 Jy ! Component: 1650 - total flux cleaned = -0.0072484 Jy ! Component: 1700 - total flux cleaned = -0.00720129 Jy ! Component: 1750 - total flux cleaned = -0.00731687 Jy ! Component: 1800 - total flux cleaned = -0.00729365 Jy ! Component: 1850 - total flux cleaned = -0.0073392 Jy ! Component: 1900 - total flux cleaned = -0.0073398 Jy ! Component: 1950 - total flux cleaned = -0.00754136 Jy ! Component: 2000 - total flux cleaned = -0.00756341 Jy ! Component: 2050 - total flux cleaned = -0.00760774 Jy ! Component: 2100 - total flux cleaned = -0.00756401 Jy ! Component: 2150 - total flux cleaned = -0.0077372 Jy ! Component: 2200 - total flux cleaned = -0.00773722 Jy ! Component: 2250 - total flux cleaned = -0.00786477 Jy ! Component: 2300 - total flux cleaned = -0.00784386 Jy ! Component: 2350 - total flux cleaned = -0.0078649 Jy ! Component: 2400 - total flux cleaned = -0.00788592 Jy ! Component: 2450 - total flux cleaned = -0.00798911 Jy ! Component: 2500 - total flux cleaned = -0.00796842 Jy ! Component: 2550 - total flux cleaned = -0.00798896 Jy ! Component: 2600 - total flux cleaned = -0.00800905 Jy ! Component: 2650 - total flux cleaned = -0.00798916 Jy ! Component: 2700 - total flux cleaned = -0.0080493 Jy ! Component: 2750 - total flux cleaned = -0.00814845 Jy ! Component: 2800 - total flux cleaned = -0.00816825 Jy ! Component: 2850 - total flux cleaned = -0.00814874 Jy ! Component: 2900 - total flux cleaned = -0.0082847 Jy ! Component: 2950 - total flux cleaned = -0.00834249 Jy ! Component: 3000 - total flux cleaned = -0.00836152 Jy ! Component: 3050 - total flux cleaned = -0.00843795 Jy ! Component: 3100 - total flux cleaned = -0.00849443 Jy ! Component: 3150 - total flux cleaned = -0.00849449 Jy ! Component: 3200 - total flux cleaned = -0.00856925 Jy ! Component: 3250 - total flux cleaned = -0.00860652 Jy ! Component: 3300 - total flux cleaned = -0.0086803 Jy ! Component: 3350 - total flux cleaned = -0.00873547 Jy ! Component: 3400 - total flux cleaned = -0.00873535 Jy ! Component: 3450 - total flux cleaned = -0.00878969 Jy ! Component: 3500 - total flux cleaned = -0.00877158 Jy ! Component: 3550 - total flux cleaned = -0.00889666 Jy ! Component: 3600 - total flux cleaned = -0.00889674 Jy ! Component: 3650 - total flux cleaned = -0.00898529 Jy ! Component: 3700 - total flux cleaned = -0.0090205 Jy ! Component: 3750 - total flux cleaned = -0.00905553 Jy ! Component: 3800 - total flux cleaned = -0.00907283 Jy ! Component: 3850 - total flux cleaned = -0.00912471 Jy ! Component: 3900 - total flux cleaned = -0.00915915 Jy ! Component: 3950 - total flux cleaned = -0.00909076 Jy ! Component: 4000 - total flux cleaned = -0.00915897 Jy ! Component: 4050 - total flux cleaned = -0.00924343 Jy ! Total flux subtracted in 4096 components = -0.00920977 Jy ! Clean residual min=-0.000884 max=0.000986 Jy/beam ! Clean residual mean=-0.000000 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.67473 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 545 components and 0.674731 Jy ![Exited script file: muppet] wmap "J1343-1747_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 8.146 at -4.434 degrees (North through East) ! Clean map min=-0.001957 max=0.42334 Jy/beam ! Writing clean map to FITS file: J1343-1747_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.423337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324139 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.229703 0.229703 0.459406 0.918811 1.83762 3.67524 7.35049 14.701 29.402 58.8039 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.423 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 8.146 at -4.434 degrees (North through East) ! Clean map min=-0.001957 max=0.42334 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1343-1747_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:28:31 2019