! Started logfile: J1343+6602_X_2017_05_27_pus_uvs.log on Fri May 3 10:37:37 2019 obs J1343+6602_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1343+6602_X_2017_05_27_pus_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.812757 visibilities/baseline/integration-bin. ! Found source: J1343+6602 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 23700 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1343+6602_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.735057Jy sigma=0.006054 ! Fit after self-cal, rms=0.731674Jy sigma=0.006028 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8824 mas, bmaj=0.96 mas, bpa=-29.55 degrees ! Estimated noise=870.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203578 Jy ! Component: 100 - total flux cleaned = 0.258453 Jy ! Total flux subtracted in 100 components = 0.258453 Jy ! Clean residual min=-0.006411 max=0.023598 Jy/beam ! Clean residual mean=-0.000029 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.258453 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.258453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096891Jy sigma=0.000760 ! Fit after self-cal, rms=0.096727Jy sigma=0.000759 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271757 Jy ! Component: 100 - total flux cleaned = 0.041731 Jy ! Total flux subtracted in 100 components = 0.041731 Jy ! Clean residual min=-0.004672 max=0.008303 Jy/beam ! Clean residual mean=-0.000007 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.300184 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.300184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087030Jy sigma=0.000672 ! Fit after self-cal, rms=0.086862Jy sigma=0.000671 ! Inverting map ! Added new window around map position (1, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104363 Jy ! Component: 100 - total flux cleaned = 0.0165665 Jy ! Total flux subtracted in 100 components = 0.0165665 Jy ! Clean residual min=-0.003796 max=0.003633 Jy/beam ! Clean residual mean=0.000001 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.316751 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.316751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085335Jy sigma=0.000657 ! Fit after self-cal, rms=0.085248Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=1.214 mas, bpa=-27.3 degrees ! Estimated noise=563.502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552951 Jy ! Component: 100 - total flux cleaned = 0.00717028 Jy ! Component: 150 - total flux cleaned = 0.00768055 Jy ! Component: 200 - total flux cleaned = 0.00817137 Jy ! Total flux subtracted in 200 components = 0.00817137 Jy ! Clean residual min=-0.002482 max=0.003014 Jy/beam ! Clean residual mean=0.000007 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.324922 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.324922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084885Jy sigma=0.000653 ! Fit after self-cal, rms=0.084835Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.99 KP 1.03 ! LA 0.96 MK 0.99 NL 0.98 OV 1.00 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00 KP 0.99 ! LA 0.99 MK 0.99 NL 0.98 OV 1.01 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.96 KP 1.02 ! LA 1.01 MK 1.01 NL 0.97 OV 1.00 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.98 KP 0.99 ! LA 1.02 MK 1.02 NL 0.98 OV 1.00 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.98 KP 1.01 ! LA 1.00 MK 1.04 NL 0.95 OV 1.00 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.98 KP 1.00 ! LA 1.00 MK 1.01 NL 0.99 OV 0.99 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.98 KP 0.99 ! LA 1.01 MK 1.01 NL 0.98 OV 1.01 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 HN 0.98 KP 1.00 ! LA 0.98 MK 0.98 NL 0.99 OV 1.01 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.96 KP 1.00 ! LA 0.99 MK 0.99 NL 0.96 OV 1.02 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.99 KP 0.99 ! LA 1.01 MK 1.02 NL 0.97 OV 1.01 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.01 KP 1.00 ! LA 1.01 MK 0.97 NL 0.97 OV 1.02 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.97 KP 0.99 ! LA 0.99 MK 0.97 NL 0.96 OV 1.03 ! PT 1.03 SC 1.01 ! ! ! Fit before self-cal, rms=0.084835Jy sigma=0.000653 ! Fit after self-cal, rms=0.083793Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.11 mas, bmaj=1.223 mas, bpa=-27.68 degrees ! Estimated noise=562.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103296 Jy ! Component: 100 - total flux cleaned = 5.75714e-06 Jy ! Component: 150 - total flux cleaned = 5.38016e-06 Jy ! Component: 200 - total flux cleaned = 5.21373e-06 Jy ! Total flux subtracted in 200 components = 5.21373e-06 Jy ! Clean residual min=-0.001915 max=0.002498 Jy/beam ! Clean residual mean=0.000006 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.324927 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.324927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083711Jy sigma=0.000648 ! Fit after self-cal, rms=0.083680Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083680Jy sigma=0.000648 ! Fit after self-cal, rms=0.083893Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.225 mas, bpa=-26.48 degrees ! Estimated noise=562.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158819 Jy ! Component: 100 - total flux cleaned = 0.000445041 Jy ! Component: 150 - total flux cleaned = 0.000518481 Jy ! Component: 200 - total flux cleaned = 0.00051832 Jy ! Total flux subtracted in 200 components = 0.00051832 Jy ! Clean residual min=-0.001675 max=0.001669 Jy/beam ! Clean residual mean=-0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.325446 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.325446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083843Jy sigma=0.000640 ! Fit after self-cal, rms=0.083852Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.08296e-05 Jy ! Component: 100 - total flux cleaned = 0.000211787 Jy ! Component: 150 - total flux cleaned = 0.000211948 Jy ! Component: 200 - total flux cleaned = 0.000212521 Jy ! Total flux subtracted in 200 components = 0.000212521 Jy ! Clean residual min=-0.001574 max=0.001522 Jy/beam ! Clean residual mean=-0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.325658 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.325658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083829Jy sigma=0.000639 ! Fit after self-cal, rms=0.083820Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083820Jy sigma=0.000639 ! Fit after self-cal, rms=0.083982Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.226 mas, bpa=-25.87 degrees ! Estimated noise=563.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.85468e-05 Jy ! Component: 100 - total flux cleaned = 0.000147675 Jy ! Component: 150 - total flux cleaned = 0.000170287 Jy ! Component: 200 - total flux cleaned = 0.000170464 Jy ! Total flux subtracted in 200 components = 0.000170464 Jy ! Clean residual min=-0.001432 max=0.001469 Jy/beam ! Clean residual mean=-0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.325829 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.325829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083964Jy sigma=0.000639 ! Fit after self-cal, rms=0.083959Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.42538e-05 Jy ! Component: 100 - total flux cleaned = 0.000102326 Jy ! Component: 150 - total flux cleaned = 0.000103262 Jy ! Component: 200 - total flux cleaned = 0.000104155 Jy ! Total flux subtracted in 200 components = 0.000104155 Jy ! Clean residual min=-0.001401 max=0.001396 Jy/beam ! Clean residual mean=-0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.325933 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.325933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083949Jy sigma=0.000639 ! Fit after self-cal, rms=0.083945Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083945Jy sigma=0.000639 ! Fit after self-cal, rms=0.084045Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=2.599 mas, bpa=-23.17 degrees ! Estimated noise=713.574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380136 Jy ! Component: 100 - total flux cleaned = 0.000423532 Jy ! Component: 150 - total flux cleaned = 0.000463765 Jy ! Component: 200 - total flux cleaned = 0.000485893 Jy ! Total flux subtracted in 200 components = 0.000485893 Jy ! Clean residual min=-0.001954 max=0.001723 Jy/beam ! Clean residual mean=-0.000004 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.326419 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.326419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084043Jy sigma=0.000639 ! Fit after self-cal, rms=0.084041Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.33577e-05 Jy ! Component: 100 - total flux cleaned = 9.47325e-05 Jy ! Component: 150 - total flux cleaned = 0.000117459 Jy ! Component: 200 - total flux cleaned = 0.000130075 Jy ! Total flux subtracted in 200 components = 0.000130075 Jy ! Clean residual min=-0.001933 max=0.001697 Jy/beam ! Clean residual mean=-0.000003 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.326549 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.326549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084039Jy sigma=0.000639 ! Fit after self-cal, rms=0.084037Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.227 mas, bpa=-25.43 degrees ! Estimated noise=563.158 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.108 x 1.227 at -25.43 degrees (North through East) ! Clean map min=-0.0012618 max=0.26478 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=0.9708 mas, bpa=-26.89 degrees ! Estimated noise=869.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202502 Jy ! Component: 100 - total flux cleaned = 0.26073 Jy ! Component: 150 - total flux cleaned = 0.287856 Jy ! Component: 200 - total flux cleaned = 0.302706 Jy ! Total flux subtracted in 200 components = 0.302706 Jy ! Clean residual min=-0.002769 max=0.007393 Jy/beam ! Clean residual mean=-0.000009 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.302705 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.302705 Jy ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.227 mas, bpa=-25.43 degrees ! Estimated noise=563.158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114759 Jy ! Component: 100 - total flux cleaned = 0.0171087 Jy ! Component: 150 - total flux cleaned = 0.0202477 Jy ! Component: 200 - total flux cleaned = 0.0220957 Jy ! Total flux subtracted in 200 components = 0.0220957 Jy ! Clean residual min=-0.001455 max=0.001469 Jy/beam ! Clean residual mean=-0.000004 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.324801 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.324801 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=2.599 mas, bpa=-23.17 degrees ! Estimated noise=713.574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134178 Jy ! Component: 100 - total flux cleaned = 0.00180948 Jy ! Component: 150 - total flux cleaned = 0.00185255 Jy ! Component: 200 - total flux cleaned = 0.0018886 Jy ! Total flux subtracted in 200 components = 0.0018886 Jy ! Clean residual min=-0.001933 max=0.001654 Jy/beam ! Clean residual mean=-0.000003 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.32669 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.26151e-05 Jy ! Component: 100 - total flux cleaned = 3.61545e-05 Jy ! Component: 150 - total flux cleaned = 3.60126e-05 Jy ! Component: 200 - total flux cleaned = 3.5749e-05 Jy ! Total flux subtracted in 200 components = 3.5749e-05 Jy ! Clean residual min=-0.001934 max=0.001656 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.326725 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.326725 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.227 mas, bpa=-25.43 degrees ! Estimated noise=563.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.68099e-05 Jy ! Component: 100 - total flux cleaned = -2.58521e-05 Jy ! Component: 150 - total flux cleaned = -6.86234e-05 Jy ! Component: 200 - total flux cleaned = -0.000107303 Jy ! Total flux subtracted in 200 components = -0.000107303 Jy ! Clean residual min=-0.001391 max=0.001371 Jy/beam ! Clean residual mean=-0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.326618 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.326618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084048Jy sigma=0.000639 ! Fit after self-cal, rms=0.084040Jy sigma=0.000639 wmodel J1343+6602_X_2017_05_27_pus_map.mod ! Writing 61 model components to file: J1343+6602_X_2017_05_27_pus_map.mod wobs J1343+6602_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1343+6602_X_2017_05_27_pus_uvs.fits wwins J1343+6602_X_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1343+6602_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.77876e-05 Jy ! Component: 100 - total flux cleaned = -0.000324755 Jy ! Component: 150 - total flux cleaned = -0.000347248 Jy ! Component: 200 - total flux cleaned = -0.00039077 Jy ! Component: 250 - total flux cleaned = -0.000348639 Jy ! Component: 300 - total flux cleaned = -0.000287294 Jy ! Component: 350 - total flux cleaned = -0.000287164 Jy ! Component: 400 - total flux cleaned = -0.000209029 Jy ! Component: 450 - total flux cleaned = -0.000170734 Jy ! Component: 500 - total flux cleaned = -0.000152037 Jy ! Component: 550 - total flux cleaned = -0.000133622 Jy ! Component: 600 - total flux cleaned = -9.70879e-05 Jy ! Component: 650 - total flux cleaned = -4.32187e-05 Jy ! Component: 700 - total flux cleaned = -4.30557e-05 Jy ! Component: 750 - total flux cleaned = 2.7273e-05 Jy ! Component: 800 - total flux cleaned = 0.000113843 Jy ! Component: 850 - total flux cleaned = 0.000181987 Jy ! Component: 900 - total flux cleaned = 0.000198692 Jy ! Component: 950 - total flux cleaned = 0.00026526 Jy ! Component: 1000 - total flux cleaned = 0.000248722 Jy ! Component: 1050 - total flux cleaned = 0.000297451 Jy ! Component: 1100 - total flux cleaned = 0.000345562 Jy ! Component: 1150 - total flux cleaned = 0.000361551 Jy ! Component: 1200 - total flux cleaned = 0.000424833 Jy ! Component: 1250 - total flux cleaned = 0.000487289 Jy ! Component: 1300 - total flux cleaned = 0.000518152 Jy ! Component: 1350 - total flux cleaned = 0.000610363 Jy ! Component: 1400 - total flux cleaned = 0.000656126 Jy ! Component: 1450 - total flux cleaned = 0.000746672 Jy ! Component: 1500 - total flux cleaned = 0.0008364 Jy ! Component: 1550 - total flux cleaned = 0.000866029 Jy ! Component: 1600 - total flux cleaned = 0.000969093 Jy ! Component: 1650 - total flux cleaned = 0.00108577 Jy ! Component: 1700 - total flux cleaned = 0.00117244 Jy ! Component: 1750 - total flux cleaned = 0.00124413 Jy ! Component: 1800 - total flux cleaned = 0.00128694 Jy ! Component: 1850 - total flux cleaned = 0.00134353 Jy ! Component: 1900 - total flux cleaned = 0.00146975 Jy ! Component: 1950 - total flux cleaned = 0.00149745 Jy ! Component: 2000 - total flux cleaned = 0.00151129 Jy ! Total flux subtracted in 2048 components = 0.00160743 Jy ! Clean residual min=-0.000915 max=0.000685 Jy/beam ! Clean residual mean=-0.000000 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.328226 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 209 components and 0.328226 Jy ![Exited script file: muppet] wmap "J1343+6602_X_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.108 x 1.227 at -25.43 degrees (North through East) ! Clean map min=-0.0010366 max=0.26453 Jy/beam ! Writing clean map to FITS file: J1343+6602_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.264531 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.294468 0.294468 0.588937 1.17787 2.35575 4.7115 9.42299 18.846 37.692 75.3839 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.264 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.108 x 1.227 at -25.43 degrees (North through East) ! Clean map min=-0.0010366 max=0.26453 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1343+6602_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:37:39 2019