! Started logfile: J1343+6602_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:15 2019 obs J1343+6602_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1343+6602_S_2017_04_28_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.820741 visibilities/baseline/integration-bin. ! Found source: J1343+6602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 4432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1343+6602_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.784900Jy sigma=0.040717 ! Fit after self-cal, rms=0.785158Jy sigma=0.040695 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=4.37 mas, bpa=-77.89 degrees ! Estimated noise=1062.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112121 Jy ! Component: 100 - total flux cleaned = 0.116399 Jy ! Total flux subtracted in 100 components = 0.116399 Jy ! Clean residual min=-0.034464 max=0.046216 Jy/beam ! Clean residual mean=0.000044 rms=0.011569 Jy/beam ! Combined flux in latest and established models = 0.116399 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.116399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138382Jy sigma=0.004667 ! Fit after self-cal, rms=0.138318Jy sigma=0.004666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.878 mas, bmaj=5.374 mas, bpa=88.8 degrees ! Estimated noise=824.803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139439 Jy ! Component: 100 - total flux cleaned = -0.00201888 Jy ! Component: 150 - total flux cleaned = -0.0025073 Jy ! Component: 200 - total flux cleaned = -0.00251395 Jy ! Total flux subtracted in 200 components = -0.00251395 Jy ! Clean residual min=-0.029401 max=0.045388 Jy/beam ! Clean residual mean=0.000032 rms=0.011058 Jy/beam ! Combined flux in latest and established models = 0.113885 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.113885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132286Jy sigma=0.004602 ! Fit after self-cal, rms=0.132248Jy sigma=0.004602 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.77 HN 0.96 KP 0.73 ! LA 21.85 MK 1.10 NL 0.73 OV 0.77 ! PT 0.79 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.66 HN 1.03 KP 0.70 ! LA 0.66 MK 1.19 NL 0.84 OV 0.73 ! PT 0.74 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.70 HN 1.02 KP 0.71 ! LA 0.69 MK 1.19 NL 0.77 OV 0.72 ! PT 0.72 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.71 HN 1.01 KP 1.00* ! LA 0.66 MK 1.29 NL 1.00* OV 1.00* ! PT 0.75 SC 1.00* ! ! ! Fit before self-cal, rms=0.132248Jy sigma=0.004602 ! Fit after self-cal, rms=0.982496Jy sigma=0.000931 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.843 mas, bmaj=5.141 mas, bpa=-21.79 degrees ! Estimated noise=895.269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149998 Jy ! Component: 100 - total flux cleaned = 0.0185335 Jy ! Component: 150 - total flux cleaned = 0.0187407 Jy ! Component: 200 - total flux cleaned = 0.0190887 Jy ! Total flux subtracted in 200 components = 0.0190887 Jy ! Clean residual min=-0.007739 max=0.006241 Jy/beam ! Clean residual mean=-0.000003 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.132974 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.132974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.980910Jy sigma=0.000911 ! Fit after self-cal, rms=0.980923Jy sigma=0.000876 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.980923Jy sigma=0.000876 ! Fit after self-cal, rms=0.060270Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.783 mas, bmaj=4.973 mas, bpa=-2.364 degrees ! Estimated noise=876.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407469 Jy ! Component: 100 - total flux cleaned = 0.00476938 Jy ! Component: 150 - total flux cleaned = 0.00496867 Jy ! Component: 200 - total flux cleaned = 0.00513747 Jy ! Total flux subtracted in 200 components = 0.00513747 Jy ! Clean residual min=-0.002919 max=0.003613 Jy/beam ! Clean residual mean=-0.000003 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.138111 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 22 components and 0.138111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059860Jy sigma=0.000690 ! Fit after self-cal, rms=0.059790Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236776 Jy ! Component: 100 - total flux cleaned = 0.00244304 Jy ! Component: 150 - total flux cleaned = 0.00260604 Jy ! Component: 200 - total flux cleaned = 0.00270508 Jy ! Total flux subtracted in 200 components = 0.00270508 Jy ! Clean residual min=-0.002655 max=0.002895 Jy/beam ! Clean residual mean=0.000001 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.140816 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.140816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059534Jy sigma=0.000687 ! Fit after self-cal, rms=0.059521Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059521Jy sigma=0.000686 ! Fit after self-cal, rms=0.058276Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.704 mas, bmaj=4.933 mas, bpa=-3.311 degrees ! Estimated noise=881.287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300458 Jy ! Component: 100 - total flux cleaned = 0.0037544 Jy ! Component: 150 - total flux cleaned = 0.00404124 Jy ! Component: 200 - total flux cleaned = 0.0040856 Jy ! Total flux subtracted in 200 components = 0.0040856 Jy ! Clean residual min=-0.002589 max=0.002592 Jy/beam ! Clean residual mean=0.000002 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.144902 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.144902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058060Jy sigma=0.000683 ! Fit after self-cal, rms=0.058045Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127705 Jy ! Component: 100 - total flux cleaned = 0.000163792 Jy ! Component: 150 - total flux cleaned = 0.000199584 Jy ! Component: 200 - total flux cleaned = 0.000199981 Jy ! Total flux subtracted in 200 components = 0.000199981 Jy ! Clean residual min=-0.002604 max=0.002567 Jy/beam ! Clean residual mean=0.000002 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.145102 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.145102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057988Jy sigma=0.000682 ! Fit after self-cal, rms=0.057987Jy sigma=0.000682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057987Jy sigma=0.000682 ! Fit after self-cal, rms=0.057271Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.808 mas, bmaj=9.406 mas, bpa=-85.66 degrees ! Estimated noise=1015.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179053 Jy ! Component: 100 - total flux cleaned = 0.00251568 Jy ! Component: 150 - total flux cleaned = 0.0026203 Jy ! Component: 200 - total flux cleaned = 0.00268952 Jy ! Total flux subtracted in 200 components = 0.00268952 Jy ! Clean residual min=-0.002365 max=0.002768 Jy/beam ! Clean residual mean=0.000006 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.147791 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.147791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057214Jy sigma=0.000681 ! Fit after self-cal, rms=0.057193Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293032 Jy ! Component: 100 - total flux cleaned = 0.000315865 Jy ! Component: 150 - total flux cleaned = 0.000337239 Jy ! Component: 200 - total flux cleaned = 0.000374046 Jy ! Total flux subtracted in 200 components = 0.000374046 Jy ! Clean residual min=-0.002381 max=0.002738 Jy/beam ! Clean residual mean=0.000006 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.148165 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.148165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057181Jy sigma=0.000680 ! Fit after self-cal, rms=0.057180Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.644 mas, bmaj=4.906 mas, bpa=-4.566 degrees ! Estimated noise=884.865 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.644 x 4.906 at -4.566 degrees (North through East) ! Clean map min=-0.0024512 max=0.15036 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=4.257 mas, bpa=-12.2 degrees ! Estimated noise=1098.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117015 Jy ! Component: 100 - total flux cleaned = 0.142671 Jy ! Component: 150 - total flux cleaned = 0.149501 Jy ! Component: 200 - total flux cleaned = 0.151168 Jy ! Total flux subtracted in 200 components = 0.151168 Jy ! Clean residual min=-0.003620 max=0.003882 Jy/beam ! Clean residual mean=0.000000 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.151168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.151168 Jy ! Inverting map and beam ! Estimated beam: bmin=4.644 mas, bmaj=4.906 mas, bpa=-4.566 degrees ! Estimated noise=884.865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132239 Jy ! Component: 100 - total flux cleaned = -0.00121985 Jy ! Component: 150 - total flux cleaned = -0.00113088 Jy ! Component: 200 - total flux cleaned = -0.00105646 Jy ! Total flux subtracted in 200 components = -0.00105646 Jy ! Clean residual min=-0.002688 max=0.002804 Jy/beam ! Clean residual mean=0.000002 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.150112 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.150112 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.808 mas, bmaj=9.406 mas, bpa=-85.66 degrees ! Estimated noise=1015.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103967 Jy ! Component: 100 - total flux cleaned = -0.00104108 Jy ! Component: 150 - total flux cleaned = -0.00103916 Jy ! Component: 200 - total flux cleaned = -0.00107254 Jy ! Total flux subtracted in 200 components = -0.00107254 Jy ! Clean residual min=-0.002389 max=0.002805 Jy/beam ! Clean residual mean=0.000005 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.149039 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.12175e-06 Jy ! Component: 100 - total flux cleaned = -2.9583e-05 Jy ! Component: 150 - total flux cleaned = -3.57724e-06 Jy ! Component: 200 - total flux cleaned = -2.97113e-05 Jy ! Total flux subtracted in 200 components = -2.97113e-05 Jy ! Clean residual min=-0.002369 max=0.002785 Jy/beam ! Clean residual mean=0.000005 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.149009 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.149009 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.644 mas, bmaj=4.906 mas, bpa=-4.566 degrees ! Estimated noise=884.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075425 Jy ! Component: 100 - total flux cleaned = 0.000706043 Jy ! Component: 150 - total flux cleaned = 0.000616261 Jy ! Component: 200 - total flux cleaned = 0.000493044 Jy ! Total flux subtracted in 200 components = 0.000493044 Jy ! Clean residual min=-0.002475 max=0.002534 Jy/beam ! Clean residual mean=0.000003 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.149503 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.149503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057201Jy sigma=0.000680 ! Fit after self-cal, rms=0.057204Jy sigma=0.000680 wmodel J1343+6602_S_2017_04_28_pus_map.mod ! Writing 59 model components to file: J1343+6602_S_2017_04_28_pus_map.mod wobs J1343+6602_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1343+6602_S_2017_04_28_pus_uvs.fits wwins J1343+6602_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J1343+6602_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.01287e-05 Jy ! Component: 100 - total flux cleaned = 0.000224354 Jy ! Component: 150 - total flux cleaned = 0.000474972 Jy ! Component: 200 - total flux cleaned = 0.00043344 Jy ! Component: 250 - total flux cleaned = 0.000472528 Jy ! Component: 300 - total flux cleaned = 0.000472211 Jy ! Component: 350 - total flux cleaned = 0.000398172 Jy ! Component: 400 - total flux cleaned = 0.000398053 Jy ! Component: 450 - total flux cleaned = 0.000397597 Jy ! Component: 500 - total flux cleaned = 0.000327592 Jy ! Component: 550 - total flux cleaned = 0.000362023 Jy ! Component: 600 - total flux cleaned = 0.000328103 Jy ! Component: 650 - total flux cleaned = 0.00029515 Jy ! Component: 700 - total flux cleaned = 0.000294678 Jy ! Component: 750 - total flux cleaned = 0.000166813 Jy ! Component: 800 - total flux cleaned = 0.000134835 Jy ! Component: 850 - total flux cleaned = 7.26846e-05 Jy ! Component: 900 - total flux cleaned = -0.000111561 Jy ! Component: 950 - total flux cleaned = -0.000171613 Jy ! Component: 1000 - total flux cleaned = -0.000231219 Jy ! Component: 1050 - total flux cleaned = -0.000408419 Jy ! Component: 1100 - total flux cleaned = -0.000495703 Jy ! Component: 1150 - total flux cleaned = -0.000582494 Jy ! Component: 1200 - total flux cleaned = -0.000724597 Jy ! Component: 1250 - total flux cleaned = -0.000780703 Jy ! Component: 1300 - total flux cleaned = -0.000919264 Jy ! Component: 1350 - total flux cleaned = -0.000946665 Jy ! Component: 1400 - total flux cleaned = -0.00102786 Jy ! Component: 1450 - total flux cleaned = -0.00102745 Jy ! Component: 1500 - total flux cleaned = -0.00108088 Jy ! Component: 1550 - total flux cleaned = -0.00115989 Jy ! Component: 1600 - total flux cleaned = -0.00105557 Jy ! Component: 1650 - total flux cleaned = -0.00113323 Jy ! Component: 1700 - total flux cleaned = -0.00110749 Jy ! Component: 1750 - total flux cleaned = -0.00120894 Jy ! Component: 1800 - total flux cleaned = -0.00118314 Jy ! Component: 1850 - total flux cleaned = -0.00118331 Jy ! Component: 1900 - total flux cleaned = -0.00123236 Jy ! Component: 1950 - total flux cleaned = -0.00115862 Jy ! Component: 2000 - total flux cleaned = -0.00115865 Jy ! Component: 2050 - total flux cleaned = -0.00108659 Jy ! Component: 2100 - total flux cleaned = -0.00108666 Jy ! Component: 2150 - total flux cleaned = -0.00103913 Jy ! Component: 2200 - total flux cleaned = -0.000921951 Jy ! Component: 2250 - total flux cleaned = -0.000945146 Jy ! Component: 2300 - total flux cleaned = -0.000898817 Jy ! Component: 2350 - total flux cleaned = -0.000807242 Jy ! Component: 2400 - total flux cleaned = -0.000852635 Jy ! Component: 2450 - total flux cleaned = -0.000739939 Jy ! Component: 2500 - total flux cleaned = -0.000784701 Jy ! Component: 2550 - total flux cleaned = -0.000673812 Jy ! Component: 2600 - total flux cleaned = -0.000563958 Jy ! Component: 2650 - total flux cleaned = -0.00058574 Jy ! Component: 2700 - total flux cleaned = -0.000455505 Jy ! Component: 2750 - total flux cleaned = -0.000326553 Jy ! Component: 2800 - total flux cleaned = -0.000284037 Jy ! Component: 2850 - total flux cleaned = -0.000199177 Jy ! Component: 2900 - total flux cleaned = -0.000178133 Jy ! Component: 2950 - total flux cleaned = -1.12259e-05 Jy ! Component: 3000 - total flux cleaned = -5.26036e-05 Jy ! Component: 3050 - total flux cleaned = 0.000112064 Jy ! Component: 3100 - total flux cleaned = 0.00017327 Jy ! Component: 3150 - total flux cleaned = 0.00021391 Jy ! Component: 3200 - total flux cleaned = 0.0002946 Jy ! Component: 3250 - total flux cleaned = 0.000434933 Jy ! Component: 3300 - total flux cleaned = 0.000514623 Jy ! Component: 3350 - total flux cleaned = 0.000573897 Jy ! Component: 3400 - total flux cleaned = 0.000711206 Jy ! Component: 3450 - total flux cleaned = 0.000711297 Jy ! Component: 3500 - total flux cleaned = 0.000789017 Jy ! Component: 3550 - total flux cleaned = 0.000885 Jy ! Component: 3600 - total flux cleaned = 0.00099989 Jy ! Component: 3650 - total flux cleaned = 0.00107586 Jy ! Component: 3700 - total flux cleaned = 0.00111357 Jy ! Component: 3750 - total flux cleaned = 0.00116969 Jy ! Component: 3800 - total flux cleaned = 0.00115102 Jy ! Component: 3850 - total flux cleaned = 0.00124377 Jy ! Component: 3900 - total flux cleaned = 0.00129908 Jy ! Component: 3950 - total flux cleaned = 0.00144544 Jy ! Component: 4000 - total flux cleaned = 0.00144505 Jy ! Component: 4050 - total flux cleaned = 0.00144502 Jy ! Total flux subtracted in 4096 components = 0.00142718 Jy ! Clean residual min=-0.000923 max=0.000959 Jy/beam ! Clean residual mean=0.000002 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.15093 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 327 components and 0.15093 Jy ![Exited script file: muppet] wmap "J1343+6602_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.644 x 4.906 at -4.566 degrees (North through East) ! Clean map min=-0.0022003 max=0.14939 Jy/beam ! Writing clean map to FITS file: J1343+6602_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.149393 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000317584 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.63775 0.63775 1.2755 2.551 5.102 10.204 20.408 40.816 81.632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.149 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.644 x 4.906 at -4.566 degrees (North through East) ! Clean map min=-0.0022003 max=0.14939 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1343+6602_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:19 2019