! Started logfile: J1342+1242_S_2017_10_21_pus_uvs.log on Sat May 11 20:59:06 2019 obs J1342+1242_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1342+1242_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.982759 visibilities/baseline/integration-bin. ! Found source: J1342+1242 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16416 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1342+1242_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 476 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915575Jy sigma=0.008964 ! Fit after self-cal, rms=0.892120Jy sigma=0.008734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=11.34 mas, bpa=-21.59 degrees ! Estimated noise=1195.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840041 Jy ! Component: 100 - total flux cleaned = 0.102403 Jy ! Total flux subtracted in 100 components = 0.102403 Jy ! Clean residual min=-0.004172 max=0.005481 Jy/beam ! Clean residual mean=-0.000013 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.102403 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.102403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084121Jy sigma=0.000728 ! Fit after self-cal, rms=0.084114Jy sigma=0.000728 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=12.49 mas, bpa=-20.6 degrees ! Estimated noise=660.869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756724 Jy ! Component: 100 - total flux cleaned = 0.0110717 Jy ! Component: 150 - total flux cleaned = 0.0132706 Jy ! Component: 200 - total flux cleaned = 0.014702 Jy ! Total flux subtracted in 200 components = 0.014702 Jy ! Clean residual min=-0.002712 max=0.003154 Jy/beam ! Clean residual mean=-0.000003 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.117105 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 41 components and 0.117105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083265Jy sigma=0.000723 ! Fit after self-cal, rms=0.083267Jy sigma=0.000723 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.97 KP 1.10 ! LA 1.00 MK 0.98 NL 0.93 OV 0.99 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.01 HN 1.05 KP 1.04 ! LA 1.00 MK 1.00 NL 1.01 OV 1.03 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.97 KP 1.06 ! LA 0.77 MK 1.01 NL 1.21 OV 0.94 ! PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.96 KP 1.00* ! LA 0.79 MK 1.21 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.083267Jy sigma=0.000723 ! Fit after self-cal, rms=0.081110Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=12.65 mas, bpa=-20.58 degrees ! Estimated noise=662.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000843169 Jy ! Component: 100 - total flux cleaned = -0.000992004 Jy ! Component: 150 - total flux cleaned = -0.00116965 Jy ! Component: 200 - total flux cleaned = -0.00131649 Jy ! Total flux subtracted in 200 components = -0.00131649 Jy ! Clean residual min=-0.002238 max=0.002272 Jy/beam ! Clean residual mean=0.000011 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.115789 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.115789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081075Jy sigma=0.000714 ! Fit after self-cal, rms=0.081072Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081072Jy sigma=0.000714 ! Fit after self-cal, rms=0.082362Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.81 mas, bmaj=12.68 mas, bpa=-20.57 degrees ! Estimated noise=662.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000805307 Jy ! Component: 100 - total flux cleaned = -0.000993082 Jy ! Component: 150 - total flux cleaned = -0.00107355 Jy ! Component: 200 - total flux cleaned = -0.00116213 Jy ! Total flux subtracted in 200 components = -0.00116213 Jy ! Clean residual min=-0.001866 max=0.001741 Jy/beam ! Clean residual mean=0.000016 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.114627 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.114627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082346Jy sigma=0.000711 ! Fit after self-cal, rms=0.082374Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104117 Jy ! Component: 100 - total flux cleaned = -0.000162943 Jy ! Component: 150 - total flux cleaned = -0.000189163 Jy ! Component: 200 - total flux cleaned = -0.000213081 Jy ! Total flux subtracted in 200 components = -0.000213081 Jy ! Clean residual min=-0.001862 max=0.001716 Jy/beam ! Clean residual mean=0.000016 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.114414 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.114414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082368Jy sigma=0.000710 ! Fit after self-cal, rms=0.082367Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082367Jy sigma=0.000710 ! Fit after self-cal, rms=0.082952Jy sigma=0.000710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=12.72 mas, bpa=-20.54 degrees ! Estimated noise=663.737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350184 Jy ! Component: 100 - total flux cleaned = -0.000431426 Jy ! Component: 150 - total flux cleaned = -0.000516572 Jy ! Component: 200 - total flux cleaned = -0.000566438 Jy ! Total flux subtracted in 200 components = -0.000566438 Jy ! Clean residual min=-0.001887 max=0.001707 Jy/beam ! Clean residual mean=0.000016 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.113847 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.113847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082944Jy sigma=0.000710 ! Fit after self-cal, rms=0.082951Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.69318e-05 Jy ! Component: 100 - total flux cleaned = -7.96604e-05 Jy ! Component: 150 - total flux cleaned = -9.92683e-05 Jy ! Component: 200 - total flux cleaned = -0.000117438 Jy ! Total flux subtracted in 200 components = -0.000117438 Jy ! Clean residual min=-0.001885 max=0.001693 Jy/beam ! Clean residual mean=0.000015 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.11373 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.11373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082948Jy sigma=0.000710 ! Fit after self-cal, rms=0.082947Jy sigma=0.000710 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082947Jy sigma=0.000710 ! Fit after self-cal, rms=0.083280Jy sigma=0.000710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.006 mas, bmaj=13.78 mas, bpa=-18.94 degrees ! Estimated noise=777.323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155137 Jy ! Component: 100 - total flux cleaned = -0.000229487 Jy ! Component: 150 - total flux cleaned = -0.000308549 Jy ! Component: 200 - total flux cleaned = -0.000364514 Jy ! Total flux subtracted in 200 components = -0.000364514 Jy ! Clean residual min=-0.001805 max=0.001731 Jy/beam ! Clean residual mean=0.000026 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.113365 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.113365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083277Jy sigma=0.000710 ! Fit after self-cal, rms=0.083280Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.83643e-05 Jy ! Component: 100 - total flux cleaned = -7.00653e-05 Jy ! Component: 150 - total flux cleaned = -9.78592e-05 Jy ! Component: 200 - total flux cleaned = -0.000117882 Jy ! Total flux subtracted in 200 components = -0.000117882 Jy ! Clean residual min=-0.001786 max=0.001733 Jy/beam ! Clean residual mean=0.000026 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.113247 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.113247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083278Jy sigma=0.000710 ! Fit after self-cal, rms=0.083277Jy sigma=0.000710 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=12.74 mas, bpa=-20.52 degrees ! Estimated noise=664.636 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 12.74 at -20.52 degrees (North through East) ! Clean map min=-0.0018482 max=0.10997 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=11.64 mas, bpa=-21.43 degrees ! Estimated noise=1226.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0859425 Jy ! Component: 100 - total flux cleaned = 0.104784 Jy ! Component: 150 - total flux cleaned = 0.110312 Jy ! Component: 200 - total flux cleaned = 0.112984 Jy ! Total flux subtracted in 200 components = 0.112984 Jy ! Clean residual min=-0.003179 max=0.003612 Jy/beam ! Clean residual mean=0.000007 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.112984 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.112984 Jy ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=12.74 mas, bpa=-20.52 degrees ! Estimated noise=664.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643277 Jy ! Component: 100 - total flux cleaned = 0.000642174 Jy ! Component: 150 - total flux cleaned = 0.000641258 Jy ! Component: 200 - total flux cleaned = 0.00056538 Jy ! Total flux subtracted in 200 components = 0.00056538 Jy ! Clean residual min=-0.001921 max=0.001693 Jy/beam ! Clean residual mean=0.000015 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.113549 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.113549 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.006 mas, bmaj=13.78 mas, bpa=-18.94 degrees ! Estimated noise=777.323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144171 Jy ! Component: 100 - total flux cleaned = 0.000118587 Jy ! Component: 150 - total flux cleaned = 8.86079e-05 Jy ! Component: 200 - total flux cleaned = 6.34167e-05 Jy ! Total flux subtracted in 200 components = 6.34167e-05 Jy ! Clean residual min=-0.001827 max=0.001822 Jy/beam ! Clean residual mean=0.000027 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.113613 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.27788e-05 Jy ! Component: 100 - total flux cleaned = -5.09645e-05 Jy ! Component: 150 - total flux cleaned = -7.68866e-05 Jy ! Component: 200 - total flux cleaned = -9.50405e-05 Jy ! Total flux subtracted in 200 components = -9.50405e-05 Jy ! Clean residual min=-0.001802 max=0.001812 Jy/beam ! Clean residual mean=0.000026 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.113518 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 0.113518 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=12.74 mas, bpa=-20.52 degrees ! Estimated noise=664.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88961e-05 Jy ! Component: 100 - total flux cleaned = 0.000118461 Jy ! Component: 150 - total flux cleaned = 0.000118606 Jy ! Component: 200 - total flux cleaned = 9.5667e-05 Jy ! Total flux subtracted in 200 components = 9.5667e-05 Jy ! Clean residual min=-0.001827 max=0.001712 Jy/beam ! Clean residual mean=0.000015 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.113613 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.113613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083304Jy sigma=0.000711 ! Fit after self-cal, rms=0.083290Jy sigma=0.000711 wmodel J1342+1242_S_2017_10_21_pus_map.mod ! Writing 59 model components to file: J1342+1242_S_2017_10_21_pus_map.mod wobs J1342+1242_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1342+1242_S_2017_10_21_pus_uvs.fits wwins J1342+1242_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1342+1242_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014201 Jy ! Component: 100 - total flux cleaned = -0.000229191 Jy ! Component: 150 - total flux cleaned = -0.000417495 Jy ! Component: 200 - total flux cleaned = -0.000519322 Jy ! Component: 250 - total flux cleaned = -0.000640342 Jy ! Component: 300 - total flux cleaned = -0.000733171 Jy ! Component: 350 - total flux cleaned = -0.000755044 Jy ! Component: 400 - total flux cleaned = -0.000712223 Jy ! Component: 450 - total flux cleaned = -0.000649992 Jy ! Component: 500 - total flux cleaned = -0.000568631 Jy ! Component: 550 - total flux cleaned = -0.000469459 Jy ! Component: 600 - total flux cleaned = -0.000411418 Jy ! Component: 650 - total flux cleaned = -0.000279344 Jy ! Component: 700 - total flux cleaned = -0.000224109 Jy ! Component: 750 - total flux cleaned = -9.75145e-05 Jy ! Component: 800 - total flux cleaned = 8.54577e-06 Jy ! Component: 850 - total flux cleaned = 7.80488e-05 Jy ! Component: 900 - total flux cleaned = 0.000214723 Jy ! Component: 950 - total flux cleaned = 0.00029894 Jy ! Component: 1000 - total flux cleaned = 0.00043126 Jy ! Component: 1050 - total flux cleaned = 0.000544886 Jy ! Component: 1100 - total flux cleaned = 0.000640477 Jy ! Component: 1150 - total flux cleaned = 0.000734529 Jy ! Component: 1200 - total flux cleaned = 0.000734788 Jy ! Component: 1250 - total flux cleaned = 0.000811529 Jy ! Component: 1300 - total flux cleaned = 0.000886912 Jy ! Component: 1350 - total flux cleaned = 0.000961284 Jy ! Component: 1400 - total flux cleaned = 0.00106367 Jy ! Component: 1450 - total flux cleaned = 0.00116464 Jy ! Component: 1500 - total flux cleaned = 0.00126421 Jy ! Component: 1550 - total flux cleaned = 0.00137656 Jy ! Component: 1600 - total flux cleaned = 0.00144577 Jy ! Component: 1650 - total flux cleaned = 0.00154151 Jy ! Component: 1700 - total flux cleaned = 0.00166316 Jy ! Component: 1750 - total flux cleaned = 0.00172988 Jy ! Component: 1800 - total flux cleaned = 0.00183543 Jy ! Component: 1850 - total flux cleaned = 0.00193957 Jy ! Component: 1900 - total flux cleaned = 0.00200387 Jy ! Component: 1950 - total flux cleaned = 0.00208034 Jy ! Component: 2000 - total flux cleaned = 0.00213071 Jy ! Component: 2050 - total flux cleaned = 0.00221766 Jy ! Component: 2100 - total flux cleaned = 0.00229124 Jy ! Component: 2150 - total flux cleaned = 0.00235207 Jy ! Component: 2200 - total flux cleaned = 0.00240011 Jy ! Component: 2250 - total flux cleaned = 0.00250713 Jy ! Component: 2300 - total flux cleaned = 0.00255415 Jy ! Component: 2350 - total flux cleaned = 0.00261237 Jy ! Component: 2400 - total flux cleaned = 0.00267012 Jy ! Component: 2450 - total flux cleaned = 0.00270442 Jy ! Component: 2500 - total flux cleaned = 0.00280641 Jy ! Component: 2550 - total flux cleaned = 0.00283985 Jy ! Component: 2600 - total flux cleaned = 0.00286212 Jy ! Component: 2650 - total flux cleaned = 0.00295017 Jy ! Component: 2700 - total flux cleaned = 0.00301555 Jy ! Component: 2750 - total flux cleaned = 0.00303721 Jy ! Component: 2800 - total flux cleaned = 0.00310147 Jy ! Component: 2850 - total flux cleaned = 0.00314389 Jy ! Component: 2900 - total flux cleaned = 0.00319655 Jy ! Component: 2950 - total flux cleaned = 0.00322786 Jy ! Component: 3000 - total flux cleaned = 0.00327965 Jy ! Component: 3050 - total flux cleaned = 0.00332078 Jy ! Component: 3100 - total flux cleaned = 0.00339205 Jy ! Component: 3150 - total flux cleaned = 0.00342234 Jy ! Component: 3200 - total flux cleaned = 0.00346224 Jy ! Component: 3250 - total flux cleaned = 0.00352164 Jy ! Component: 3300 - total flux cleaned = 0.00355113 Jy ! Component: 3350 - total flux cleaned = 0.00360965 Jy ! Component: 3400 - total flux cleaned = 0.00365804 Jy ! Component: 3450 - total flux cleaned = 0.00369655 Jy ! Component: 3500 - total flux cleaned = 0.00372515 Jy ! Component: 3550 - total flux cleaned = 0.00376307 Jy ! Component: 3600 - total flux cleaned = 0.00380068 Jy ! Component: 3650 - total flux cleaned = 0.00380997 Jy ! Component: 3700 - total flux cleaned = 0.0038008 Jy ! Component: 3750 - total flux cleaned = 0.00385613 Jy ! Component: 3800 - total flux cleaned = 0.00389271 Jy ! Component: 3850 - total flux cleaned = 0.00391084 Jy ! Component: 3900 - total flux cleaned = 0.00391987 Jy ! Component: 3950 - total flux cleaned = 0.00397376 Jy ! Component: 4000 - total flux cleaned = 0.00396479 Jy ! Component: 4050 - total flux cleaned = 0.00403585 Jy ! Total flux subtracted in 4096 components = 0.0040535 Jy ! Clean residual min=-0.000593 max=0.000516 Jy/beam ! Clean residual mean=0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.117667 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 334 components and 0.117667 Jy ![Exited script file: muppet] wmap "J1342+1242_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 12.74 at -20.52 degrees (North through East) ! Clean map min=-0.0015543 max=0.11033 Jy/beam ! Writing clean map to FITS file: J1342+1242_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110333 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162484 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.441801 0.441801 0.883603 1.76721 3.53441 7.06882 14.1376 28.2753 56.5506 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.811 x 12.74 at -20.52 degrees (North through East) ! Clean map min=-0.0015543 max=0.11033 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1342+1242_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:59:11 2019