! Started logfile: J1340-0335_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:14:54 2019 obs J1340-0335_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1340-0335_S_2017_01_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.776998 visibilities/baseline/integration-bin. ! Found source: J1340-0335 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1340-0335_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970439Jy sigma=0.005444 ! Fit after self-cal, rms=0.929883Jy sigma=0.005127 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=9.841 mas, bpa=19.53 degrees ! Estimated noise=1225.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228322 Jy ! Component: 100 - total flux cleaned = 0.323663 Jy ! Total flux subtracted in 100 components = 0.323663 Jy ! Clean residual min=-0.026325 max=0.073863 Jy/beam ! Clean residual mean=0.000014 rms=0.008560 Jy/beam ! Combined flux in latest and established models = 0.323663 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.323663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.681375Jy sigma=0.001376 ! Fit after self-cal, rms=0.680087Jy sigma=0.001369 ! Inverting map ! Added new window around map position (-6, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0757789 Jy ! Component: 100 - total flux cleaned = 0.124263 Jy ! Total flux subtracted in 100 components = 0.124263 Jy ! Clean residual min=-0.017571 max=0.033172 Jy/beam ! Clean residual mean=0.000007 rms=0.005254 Jy/beam ! Combined flux in latest and established models = 0.447925 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.447925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.662339Jy sigma=0.001018 ! Fit after self-cal, rms=0.661839Jy sigma=0.001006 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0388172 Jy ! Component: 100 - total flux cleaned = 0.0653613 Jy ! Total flux subtracted in 100 components = 0.0653613 Jy ! Clean residual min=-0.013612 max=0.029927 Jy/beam ! Clean residual mean=0.000002 rms=0.003787 Jy/beam ! Combined flux in latest and established models = 0.513287 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.513287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.655041Jy sigma=0.000886 ! Fit after self-cal, rms=0.654944Jy sigma=0.000882 ! Inverting map ! Added new window around map position (6.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291557 Jy ! Component: 100 - total flux cleaned = 0.0480576 Jy ! Total flux subtracted in 100 components = 0.0480576 Jy ! Clean residual min=-0.010998 max=0.012495 Jy/beam ! Clean residual mean=-0.000005 rms=0.002811 Jy/beam ! Combined flux in latest and established models = 0.561344 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.561344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.651164Jy sigma=0.000821 ! Fit after self-cal, rms=0.651092Jy sigma=0.000818 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.111 mas, bmaj=10.75 mas, bpa=18.26 degrees ! Estimated noise=831.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208748 Jy ! Component: 100 - total flux cleaned = 0.0353007 Jy ! Component: 150 - total flux cleaned = 0.0460458 Jy ! Component: 200 - total flux cleaned = 0.054191 Jy ! Total flux subtracted in 200 components = 0.054191 Jy ! Clean residual min=-0.007480 max=0.008520 Jy/beam ! Clean residual mean=-0.000005 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.615535 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 115 components and 0.615535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.648043Jy sigma=0.000791 ! Fit after self-cal, rms=0.648056Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 0.97 KP 1.01 ! LA 1.02 MK 1.00* NL 0.94 OV 1.01 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.98 KP 0.99 ! LA 0.99 MK 1.00* NL 1.09 OV 1.05 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.98 KP 1.02 ! LA 1.04 MK 1.00* NL 1.03 OV 0.97 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.97 KP 0.21 ! LA 0.92 MK 1.00* NL 1.00* OV 1.02 ! PT 0.97 SC 1.50 ! ! ! Fit before self-cal, rms=0.648056Jy sigma=0.000790 ! Fit after self-cal, rms=0.207605Jy sigma=0.000760 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=10.7 mas, bpa=17.78 degrees ! Estimated noise=833.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506509 Jy ! Component: 100 - total flux cleaned = 0.00702737 Jy ! Component: 150 - total flux cleaned = 0.00743104 Jy ! Component: 200 - total flux cleaned = 0.00751546 Jy ! Total flux subtracted in 200 components = 0.00751546 Jy ! Clean residual min=-0.004727 max=0.004753 Jy/beam ! Clean residual mean=-0.000010 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.623051 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 135 components and 0.623051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207301Jy sigma=0.000759 ! Fit after self-cal, rms=0.206329Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206329Jy sigma=0.000758 ! Fit after self-cal, rms=0.192611Jy sigma=0.000749 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=10.67 mas, bpa=17.68 degrees ! Estimated noise=835.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356211 Jy ! Component: 100 - total flux cleaned = 0.00550274 Jy ! Component: 150 - total flux cleaned = 0.00598491 Jy ! Component: 200 - total flux cleaned = 0.00612753 Jy ! Total flux subtracted in 200 components = 0.00612753 Jy ! Clean residual min=-0.003956 max=0.003172 Jy/beam ! Clean residual mean=-0.000007 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.629178 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 151 components and 0.629178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192422Jy sigma=0.000748 ! Fit after self-cal, rms=0.192619Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328359 Jy ! Component: 100 - total flux cleaned = 0.000260953 Jy ! Component: 150 - total flux cleaned = 0.000197699 Jy ! Component: 200 - total flux cleaned = 0.000196068 Jy ! Total flux subtracted in 200 components = 0.000196068 Jy ! Clean residual min=-0.003859 max=0.003072 Jy/beam ! Clean residual mean=-0.000007 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.629374 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 0.629374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192567Jy sigma=0.000747 ! Fit after self-cal, rms=0.192571Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192571Jy sigma=0.000747 ! Fit after self-cal, rms=0.194288Jy sigma=0.000745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=10.66 mas, bpa=17.65 degrees ! Estimated noise=838.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250021 Jy ! Component: 100 - total flux cleaned = 0.00357432 Jy ! Component: 150 - total flux cleaned = 0.00387045 Jy ! Component: 200 - total flux cleaned = 0.00402703 Jy ! Total flux subtracted in 200 components = 0.00402703 Jy ! Clean residual min=-0.003522 max=0.003012 Jy/beam ! Clean residual mean=-0.000001 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.633401 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 176 components and 0.633402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194172Jy sigma=0.000745 ! Fit after self-cal, rms=0.194241Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020992 Jy ! Component: 100 - total flux cleaned = 0.000208746 Jy ! Component: 150 - total flux cleaned = 0.000209112 Jy ! Component: 200 - total flux cleaned = 0.000125452 Jy ! Total flux subtracted in 200 components = 0.000125452 Jy ! Clean residual min=-0.003426 max=0.002918 Jy/beam ! Clean residual mean=-0.000002 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.633527 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 184 components and 0.633527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194211Jy sigma=0.000745 ! Fit after self-cal, rms=0.194213Jy sigma=0.000745 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194213Jy sigma=0.000745 ! Fit after self-cal, rms=0.195885Jy sigma=0.000745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.742 mas, bmaj=13.42 mas, bpa=8.198 degrees ! Estimated noise=975.379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259958 Jy ! Component: 100 - total flux cleaned = 0.00311117 Jy ! Component: 150 - total flux cleaned = 0.00325555 Jy ! Component: 200 - total flux cleaned = 0.00337718 Jy ! Total flux subtracted in 200 components = 0.00337718 Jy ! Clean residual min=-0.003523 max=0.003586 Jy/beam ! Clean residual mean=0.000001 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.636904 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 208 components and 0.636904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195791Jy sigma=0.000745 ! Fit after self-cal, rms=0.195809Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79853e-05 Jy ! Component: 100 - total flux cleaned = 6.31648e-05 Jy ! Component: 150 - total flux cleaned = 9.17995e-05 Jy ! Component: 200 - total flux cleaned = 0.000118076 Jy ! Total flux subtracted in 200 components = 0.000118076 Jy ! Clean residual min=-0.003441 max=0.003503 Jy/beam ! Clean residual mean=0.000001 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.637022 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 220 components and 0.637022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195795Jy sigma=0.000745 ! Fit after self-cal, rms=0.195798Jy sigma=0.000745 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=10.65 mas, bpa=17.6 degrees ! Estimated noise=841.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.132 x 10.65 at 17.6 degrees (North through East) ! Clean map min=-0.0032321 max=0.29271 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=9.707 mas, bpa=18.79 degrees ! Estimated noise=1229.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230073 Jy ! Component: 100 - total flux cleaned = 0.33971 Jy ! Component: 150 - total flux cleaned = 0.413647 Jy ! Component: 200 - total flux cleaned = 0.464696 Jy ! Total flux subtracted in 200 components = 0.464696 Jy ! Clean residual min=-0.012836 max=0.028288 Jy/beam ! Clean residual mean=0.000005 rms=0.004254 Jy/beam ! Combined flux in latest and established models = 0.464696 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.464696 Jy ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=10.65 mas, bpa=17.6 degrees ! Estimated noise=841.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527456 Jy ! Component: 100 - total flux cleaned = 0.0857836 Jy ! Component: 150 - total flux cleaned = 0.108071 Jy ! Component: 200 - total flux cleaned = 0.123735 Jy ! Total flux subtracted in 200 components = 0.123735 Jy ! Clean residual min=-0.004844 max=0.008695 Jy/beam ! Clean residual mean=0.000012 rms=0.001865 Jy/beam ! Combined flux in latest and established models = 0.58843 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 101 components and 0.588431 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111901 Jy ! Component: 100 - total flux cleaned = 0.0193946 Jy ! Component: 150 - total flux cleaned = 0.0255794 Jy ! Component: 200 - total flux cleaned = 0.0303346 Jy ! Total flux subtracted in 200 components = 0.0303346 Jy ! Clean residual min=-0.003615 max=0.004033 Jy/beam ! Clean residual mean=0.000005 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.618765 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 151 components and 0.618765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.742 mas, bmaj=13.42 mas, bpa=8.198 degrees ! Estimated noise=975.379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567456 Jy ! Component: 100 - total flux cleaned = 0.00943784 Jy ! Component: 150 - total flux cleaned = 0.0121393 Jy ! Component: 200 - total flux cleaned = 0.0141326 Jy ! Total flux subtracted in 200 components = 0.0141326 Jy ! Clean residual min=-0.003512 max=0.003461 Jy/beam ! Clean residual mean=0.000002 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.632898 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148637 Jy ! Component: 100 - total flux cleaned = 0.00259909 Jy ! Component: 150 - total flux cleaned = 0.00305892 Jy ! Component: 200 - total flux cleaned = 0.00336 Jy ! Total flux subtracted in 200 components = 0.00336 Jy ! Clean residual min=-0.003375 max=0.003341 Jy/beam ! Clean residual mean=0.000000 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.636258 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 204 components and 0.636258 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=10.65 mas, bpa=17.6 degrees ! Estimated noise=841.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075705 Jy ! Component: 100 - total flux cleaned = 0.000868532 Jy ! Component: 150 - total flux cleaned = 0.000963963 Jy ! Component: 200 - total flux cleaned = 0.000965163 Jy ! Total flux subtracted in 200 components = 0.000965163 Jy ! Clean residual min=-0.003311 max=0.002932 Jy/beam ! Clean residual mean=-0.000000 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.637223 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 223 components and 0.637223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195753Jy sigma=0.000744 ! Fit after self-cal, rms=0.195736Jy sigma=0.000744 wmodel J1340-0335_S_2017_01_16_pus_map.mod ! Writing 223 model components to file: J1340-0335_S_2017_01_16_pus_map.mod wobs J1340-0335_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1340-0335_S_2017_01_16_pus_uvs.fits wwins J1340-0335_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J1340-0335_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000428988 Jy ! Component: 100 - total flux cleaned = -0.0004292 Jy ! Component: 150 - total flux cleaned = -0.000333716 Jy ! Component: 200 - total flux cleaned = -0.000426096 Jy ! Component: 250 - total flux cleaned = -0.00055874 Jy ! Component: 300 - total flux cleaned = -0.00064495 Jy ! Component: 350 - total flux cleaned = -0.000728878 Jy ! Component: 400 - total flux cleaned = -0.000848075 Jy ! Component: 450 - total flux cleaned = -0.000886217 Jy ! Component: 500 - total flux cleaned = -0.00096115 Jy ! Component: 550 - total flux cleaned = -0.00103494 Jy ! Component: 600 - total flux cleaned = -0.00114365 Jy ! Component: 650 - total flux cleaned = -0.00125028 Jy ! Component: 700 - total flux cleaned = -0.0014244 Jy ! Component: 750 - total flux cleaned = -0.00152603 Jy ! Component: 800 - total flux cleaned = -0.00155963 Jy ! Component: 850 - total flux cleaned = -0.0016254 Jy ! Component: 900 - total flux cleaned = -0.00162633 Jy ! Component: 950 - total flux cleaned = -0.00181604 Jy ! Component: 1000 - total flux cleaned = -0.00187765 Jy ! Component: 1050 - total flux cleaned = -0.00199934 Jy ! Component: 1100 - total flux cleaned = -0.00211885 Jy ! Component: 1150 - total flux cleaned = -0.00235394 Jy ! Component: 1200 - total flux cleaned = -0.00249914 Jy ! Component: 1250 - total flux cleaned = -0.00267081 Jy ! Component: 1300 - total flux cleaned = -0.00281182 Jy ! Component: 1350 - total flux cleaned = -0.00297831 Jy ! Component: 1400 - total flux cleaned = -0.0030601 Jy ! Component: 1450 - total flux cleaned = -0.00316787 Jy ! Component: 1500 - total flux cleaned = -0.00319498 Jy ! Component: 1550 - total flux cleaned = -0.00348464 Jy ! Component: 1600 - total flux cleaned = -0.0036145 Jy ! Component: 1650 - total flux cleaned = -0.00376841 Jy ! Component: 1700 - total flux cleaned = -0.00392087 Jy ! Component: 1750 - total flux cleaned = -0.00409577 Jy ! Component: 1800 - total flux cleaned = -0.00424404 Jy ! Component: 1850 - total flux cleaned = -0.00441496 Jy ! Component: 1900 - total flux cleaned = -0.0045115 Jy ! Component: 1950 - total flux cleaned = -0.00472705 Jy ! Component: 2000 - total flux cleaned = -0.00482153 Jy ! Component: 2050 - total flux cleaned = -0.00507839 Jy ! Component: 2100 - total flux cleaned = -0.00517062 Jy ! Component: 2150 - total flux cleaned = -0.0053533 Jy ! Component: 2200 - total flux cleaned = -0.00553376 Jy ! Component: 2250 - total flux cleaned = -0.0056455 Jy ! Component: 2300 - total flux cleaned = -0.00580094 Jy ! Component: 2350 - total flux cleaned = -0.00597646 Jy ! Component: 2400 - total flux cleaned = -0.00608488 Jy ! Component: 2450 - total flux cleaned = -0.00621393 Jy ! Component: 2500 - total flux cleaned = -0.00629913 Jy ! Component: 2550 - total flux cleaned = -0.00646846 Jy ! Component: 2600 - total flux cleaned = -0.00655193 Jy ! Component: 2650 - total flux cleaned = -0.00667638 Jy ! Component: 2700 - total flux cleaned = -0.00679976 Jy ! Component: 2750 - total flux cleaned = -0.0068203 Jy ! Component: 2800 - total flux cleaned = -0.00686073 Jy ! Component: 2850 - total flux cleaned = -0.00690096 Jy ! Component: 2900 - total flux cleaned = -0.00696073 Jy ! Component: 2950 - total flux cleaned = -0.00698025 Jy ! Component: 3000 - total flux cleaned = -0.00699989 Jy ! Component: 3050 - total flux cleaned = -0.00707732 Jy ! Component: 3100 - total flux cleaned = -0.00711604 Jy ! Component: 3150 - total flux cleaned = -0.00709708 Jy ! Component: 3200 - total flux cleaned = -0.00709738 Jy ! Component: 3250 - total flux cleaned = -0.00709754 Jy ! Component: 3300 - total flux cleaned = -0.00724739 Jy ! Component: 3350 - total flux cleaned = -0.00721007 Jy ! Component: 3400 - total flux cleaned = -0.0072655 Jy ! Component: 3450 - total flux cleaned = -0.00726551 Jy ! Component: 3500 - total flux cleaned = -0.00721079 Jy ! Component: 3550 - total flux cleaned = -0.00719264 Jy ! Component: 3600 - total flux cleaned = -0.00715664 Jy ! Component: 3650 - total flux cleaned = -0.00728161 Jy ! Component: 3700 - total flux cleaned = -0.00728119 Jy ! Component: 3750 - total flux cleaned = -0.00728118 Jy ! Component: 3800 - total flux cleaned = -0.00728131 Jy ! Component: 3850 - total flux cleaned = -0.00729859 Jy ! Component: 3900 - total flux cleaned = -0.00728131 Jy ! Component: 3950 - total flux cleaned = -0.0073841 Jy ! Component: 4000 - total flux cleaned = -0.00736707 Jy ! Component: 4050 - total flux cleaned = -0.00741776 Jy ! Total flux subtracted in 4096 components = -0.00738412 Jy ! Clean residual min=-0.001044 max=0.000860 Jy/beam ! Clean residual mean=-0.000000 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.629839 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 559 components and 0.629838 Jy ![Exited script file: muppet] wmap "J1340-0335_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.132 x 10.65 at 17.6 degrees (North through East) ! Clean map min=-0.0024472 max=0.29742 Jy/beam ! Writing clean map to FITS file: J1340-0335_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297415 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000341436 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.344404 0.344404 0.688807 1.37761 2.75523 5.51046 11.0209 22.0418 44.0837 88.1673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.132 x 10.65 at 17.6 degrees (North through East) ! Clean map min=-0.0024472 max=0.29742 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1340-0335_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:15:00 2019