! Started logfile: J1340-0137_S_2017_01_21_pus_uvs.log on Sun May 5 15:55:45 2019 obs J1340-0137_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1340-0137_S_2017_01_21_pus_uva.fits ! AN table 1: 106 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.593291 visibilities/baseline/integration-bin. ! Found source: J1340-0137 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 9056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1340-0137_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875737Jy sigma=0.006336 ! Fit after self-cal, rms=0.858823Jy sigma=0.006244 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=6.309 mas, bpa=-4.315 degrees ! Estimated noise=1465.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114947 Jy ! Component: 100 - total flux cleaned = 0.140012 Jy ! Total flux subtracted in 100 components = 0.140012 Jy ! Clean residual min=-0.005537 max=0.006992 Jy/beam ! Clean residual mean=0.000005 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.140012 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.140012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101191Jy sigma=0.000655 ! Fit after self-cal, rms=0.101176Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.784 mas, bmaj=6.739 mas, bpa=-2.776 degrees ! Estimated noise=1117.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664923 Jy ! Component: 100 - total flux cleaned = 0.00892351 Jy ! Component: 150 - total flux cleaned = 0.00886524 Jy ! Component: 200 - total flux cleaned = 0.00881767 Jy ! Total flux subtracted in 200 components = 0.00881767 Jy ! Clean residual min=-0.003467 max=0.004405 Jy/beam ! Clean residual mean=0.000004 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.14883 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.14883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100891Jy sigma=0.000651 ! Fit after self-cal, rms=0.100886Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.95 LA 1.01 ! MK 0.96 NL 0.96 OV 1.08 PT 1.00 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.02 LA 1.00 ! MK 0.98 NL 1.02 OV 1.16 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 LA 0.98 ! MK 1.05 NL 1.00 OV 1.03 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.95 LA 0.98 ! MK 1.11 NL 1.00* OV 1.04 PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.100886Jy sigma=0.000651 ! Fit after self-cal, rms=0.102557Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=6.745 mas, bpa=-2.478 degrees ! Estimated noise=1114.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203826 Jy ! Component: 100 - total flux cleaned = -4.07707e-05 Jy ! Component: 150 - total flux cleaned = -0.000210736 Jy ! Component: 200 - total flux cleaned = -0.000234091 Jy ! Total flux subtracted in 200 components = -0.000234091 Jy ! Clean residual min=-0.003217 max=0.003857 Jy/beam ! Clean residual mean=0.000002 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.148596 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.148596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102533Jy sigma=0.000649 ! Fit after self-cal, rms=0.102640Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102640Jy sigma=0.000649 ! Fit after self-cal, rms=0.105222Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=6.743 mas, bpa=-2.473 degrees ! Estimated noise=1114.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288982 Jy ! Component: 100 - total flux cleaned = 0.000124926 Jy ! Component: 150 - total flux cleaned = 6.45435e-05 Jy ! Component: 200 - total flux cleaned = 2.82602e-05 Jy ! Total flux subtracted in 200 components = 2.82602e-05 Jy ! Clean residual min=-0.002781 max=0.002805 Jy/beam ! Clean residual mean=0.000006 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.148624 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.148624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105212Jy sigma=0.000645 ! Fit after self-cal, rms=0.105255Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.92114e-05 Jy ! Component: 100 - total flux cleaned = -5.24844e-05 Jy ! Component: 150 - total flux cleaned = -0.000107235 Jy ! Component: 200 - total flux cleaned = -0.000119276 Jy ! Total flux subtracted in 200 components = -0.000119276 Jy ! Clean residual min=-0.002800 max=0.002816 Jy/beam ! Clean residual mean=0.000006 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.148505 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.148505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105250Jy sigma=0.000645 ! Fit after self-cal, rms=0.105245Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105245Jy sigma=0.000645 ! Fit after self-cal, rms=0.109692Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=6.739 mas, bpa=-2.455 degrees ! Estimated noise=1114.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321453 Jy ! Component: 100 - total flux cleaned = 0.00032127 Jy ! Component: 150 - total flux cleaned = 0.000321407 Jy ! Component: 200 - total flux cleaned = 0.00031156 Jy ! Total flux subtracted in 200 components = 0.00031156 Jy ! Clean residual min=-0.002682 max=0.002825 Jy/beam ! Clean residual mean=0.000006 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.148817 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.148817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109689Jy sigma=0.000645 ! Fit after self-cal, rms=0.109729Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55115e-05 Jy ! Component: 100 - total flux cleaned = 2.64434e-05 Jy ! Component: 150 - total flux cleaned = 8.86541e-06 Jy ! Component: 200 - total flux cleaned = 8.32279e-07 Jy ! Total flux subtracted in 200 components = 8.32279e-07 Jy ! Clean residual min=-0.002682 max=0.002833 Jy/beam ! Clean residual mean=0.000006 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.148817 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.148817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109728Jy sigma=0.000645 ! Fit after self-cal, rms=0.109726Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109726Jy sigma=0.000645 ! Fit after self-cal, rms=0.109905Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.463 mas, bmaj=11.37 mas, bpa=0.3732 degrees ! Estimated noise=1548.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984004 Jy ! Component: 100 - total flux cleaned = 0.00110582 Jy ! Component: 150 - total flux cleaned = 0.0012259 Jy ! Component: 200 - total flux cleaned = 0.0013235 Jy ! Total flux subtracted in 200 components = 0.0013235 Jy ! Clean residual min=-0.003084 max=0.003870 Jy/beam ! Clean residual mean=0.000013 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.150141 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.150141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109918Jy sigma=0.000645 ! Fit after self-cal, rms=0.109918Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.33007e-05 Jy ! Component: 100 - total flux cleaned = 0.000105799 Jy ! Component: 150 - total flux cleaned = 0.000168444 Jy ! Component: 200 - total flux cleaned = 0.000222605 Jy ! Total flux subtracted in 200 components = 0.000222605 Jy ! Clean residual min=-0.003068 max=0.003794 Jy/beam ! Clean residual mean=0.000013 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.150364 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.150364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109927Jy sigma=0.000645 ! Fit after self-cal, rms=0.109925Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.735 mas, bpa=-2.432 degrees ! Estimated noise=1114.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.773 x 6.735 at -2.432 degrees (North through East) ! Clean map min=-0.0024882 max=0.14771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=6.304 mas, bpa=-4.131 degrees ! Estimated noise=1467.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114722 Jy ! Component: 100 - total flux cleaned = 0.139739 Jy ! Component: 150 - total flux cleaned = 0.145812 Jy ! Component: 200 - total flux cleaned = 0.147267 Jy ! Total flux subtracted in 200 components = 0.147267 Jy ! Clean residual min=-0.004071 max=0.003476 Jy/beam ! Clean residual mean=0.000002 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.147267 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.147267 Jy ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.735 mas, bpa=-2.432 degrees ! Estimated noise=1114.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208123 Jy ! Component: 100 - total flux cleaned = 0.00226496 Jy ! Component: 150 - total flux cleaned = 0.00226478 Jy ! Component: 200 - total flux cleaned = 0.00219885 Jy ! Total flux subtracted in 200 components = 0.00219885 Jy ! Clean residual min=-0.002745 max=0.002756 Jy/beam ! Clean residual mean=0.000005 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.149465 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.149465 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.463 mas, bmaj=11.37 mas, bpa=0.3732 degrees ! Estimated noise=1548.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034425 Jy ! Component: 100 - total flux cleaned = 0.000435942 Jy ! Component: 150 - total flux cleaned = 0.000494161 Jy ! Component: 200 - total flux cleaned = 0.000576088 Jy ! Total flux subtracted in 200 components = 0.000576088 Jy ! Clean residual min=-0.003139 max=0.003878 Jy/beam ! Clean residual mean=0.000014 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.150042 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.88057e-05 Jy ! Component: 100 - total flux cleaned = 0.000127329 Jy ! Component: 150 - total flux cleaned = 0.000168417 Jy ! Component: 200 - total flux cleaned = 0.000187089 Jy ! Total flux subtracted in 200 components = 0.000187089 Jy ! Clean residual min=-0.003111 max=0.003828 Jy/beam ! Clean residual mean=0.000013 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.150229 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.150229 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.735 mas, bpa=-2.432 degrees ! Estimated noise=1114.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320387 Jy ! Component: 100 - total flux cleaned = -0.0005349 Jy ! Component: 150 - total flux cleaned = -0.000708794 Jy ! Component: 200 - total flux cleaned = -0.000813768 Jy ! Total flux subtracted in 200 components = -0.000813768 Jy ! Clean residual min=-0.002762 max=0.002780 Jy/beam ! Clean residual mean=0.000005 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.149415 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.149415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109915Jy sigma=0.000645 ! Fit after self-cal, rms=0.109914Jy sigma=0.000645 wmodel J1340-0137_S_2017_01_21_pus_map.mod ! Writing 36 model components to file: J1340-0137_S_2017_01_21_pus_map.mod wobs J1340-0137_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1340-0137_S_2017_01_21_pus_uvs.fits wwins J1340-0137_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1340-0137_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248709 Jy ! Component: 100 - total flux cleaned = 0.000295001 Jy ! Component: 150 - total flux cleaned = 8.47197e-05 Jy ! Component: 200 - total flux cleaned = 8.40445e-05 Jy ! Component: 250 - total flux cleaned = 0.000199587 Jy ! Component: 300 - total flux cleaned = 0.00012447 Jy ! Component: 350 - total flux cleaned = -0.000128819 Jy ! Component: 400 - total flux cleaned = -0.000233492 Jy ! Component: 450 - total flux cleaned = -0.000474445 Jy ! Component: 500 - total flux cleaned = -0.000709953 Jy ! Component: 550 - total flux cleaned = -0.000874583 Jy ! Component: 600 - total flux cleaned = -0.00110124 Jy ! Component: 650 - total flux cleaned = -0.00132301 Jy ! Component: 700 - total flux cleaned = -0.0015096 Jy ! Component: 750 - total flux cleaned = -0.00178478 Jy ! Component: 800 - total flux cleaned = -0.00205472 Jy ! Component: 850 - total flux cleaned = -0.00229031 Jy ! Component: 900 - total flux cleaned = -0.00237686 Jy ! Component: 950 - total flux cleaned = -0.00249146 Jy ! Component: 1000 - total flux cleaned = -0.00251965 Jy ! Component: 1050 - total flux cleaned = -0.00257493 Jy ! Component: 1100 - total flux cleaned = -0.00262967 Jy ! Component: 1150 - total flux cleaned = -0.0026026 Jy ! Component: 1200 - total flux cleaned = -0.0026296 Jy ! Component: 1250 - total flux cleaned = -0.00265581 Jy ! Component: 1300 - total flux cleaned = -0.00268118 Jy ! Component: 1350 - total flux cleaned = -0.00273226 Jy ! Component: 1400 - total flux cleaned = -0.0026818 Jy ! Component: 1450 - total flux cleaned = -0.00280674 Jy ! Component: 1500 - total flux cleaned = -0.00278266 Jy ! Component: 1550 - total flux cleaned = -0.00288013 Jy ! Component: 1600 - total flux cleaned = -0.0029038 Jy ! Component: 1650 - total flux cleaned = -0.00287997 Jy ! Component: 1700 - total flux cleaned = -0.00292726 Jy ! Component: 1750 - total flux cleaned = -0.00290401 Jy ! Component: 1800 - total flux cleaned = -0.00288049 Jy ! Component: 1850 - total flux cleaned = -0.00294896 Jy ! Component: 1900 - total flux cleaned = -0.00292644 Jy ! Component: 1950 - total flux cleaned = -0.00301581 Jy ! Component: 2000 - total flux cleaned = -0.00303771 Jy ! Component: 2050 - total flux cleaned = -0.00301587 Jy ! Component: 2100 - total flux cleaned = -0.002973 Jy ! Component: 2150 - total flux cleaned = -0.00316631 Jy ! Component: 2200 - total flux cleaned = -0.00318727 Jy ! Component: 2250 - total flux cleaned = -0.00318728 Jy ! Component: 2300 - total flux cleaned = -0.00327081 Jy ! Component: 2350 - total flux cleaned = -0.00329148 Jy ! Component: 2400 - total flux cleaned = -0.00325077 Jy ! Component: 2450 - total flux cleaned = -0.00337294 Jy ! Component: 2500 - total flux cleaned = -0.00343327 Jy ! Component: 2550 - total flux cleaned = -0.00349319 Jy ! Component: 2600 - total flux cleaned = -0.00349321 Jy ! Component: 2650 - total flux cleaned = -0.00365051 Jy ! Component: 2700 - total flux cleaned = -0.00363083 Jy ! Component: 2750 - total flux cleaned = -0.003747 Jy ! Component: 2800 - total flux cleaned = -0.00374726 Jy ! Component: 2850 - total flux cleaned = -0.0038616 Jy ! Component: 2900 - total flux cleaned = -0.00386149 Jy ! Component: 2950 - total flux cleaned = -0.00393667 Jy ! Component: 3000 - total flux cleaned = -0.00395535 Jy ! Component: 3050 - total flux cleaned = -0.00402956 Jy ! Component: 3100 - total flux cleaned = -0.00408467 Jy ! Component: 3150 - total flux cleaned = -0.00408461 Jy ! Component: 3200 - total flux cleaned = -0.00417563 Jy ! Component: 3250 - total flux cleaned = -0.00417575 Jy ! Component: 3300 - total flux cleaned = -0.00430133 Jy ! Component: 3350 - total flux cleaned = -0.0042834 Jy ! Component: 3400 - total flux cleaned = -0.0043367 Jy ! Component: 3450 - total flux cleaned = -0.00438953 Jy ! Component: 3500 - total flux cleaned = -0.00445962 Jy ! Component: 3550 - total flux cleaned = -0.00452916 Jy ! Component: 3600 - total flux cleaned = -0.00459804 Jy ! Component: 3650 - total flux cleaned = -0.00461505 Jy ! Component: 3700 - total flux cleaned = -0.00463191 Jy ! Component: 3750 - total flux cleaned = -0.00469975 Jy ! Component: 3800 - total flux cleaned = -0.00475038 Jy ! Component: 3850 - total flux cleaned = -0.00478394 Jy ! Component: 3900 - total flux cleaned = -0.00486729 Jy ! Component: 3950 - total flux cleaned = -0.00491708 Jy ! Component: 4000 - total flux cleaned = -0.00488408 Jy ! Component: 4050 - total flux cleaned = -0.00494967 Jy ! Total flux subtracted in 4096 components = -0.00498224 Jy ! Clean residual min=-0.001033 max=0.000999 Jy/beam ! Clean residual mean=-0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.144433 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 319 components and 0.144433 Jy ![Exited script file: muppet] wmap "J1340-0137_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.773 x 6.735 at -2.432 degrees (North through East) ! Clean map min=-0.0018662 max=0.1476 Jy/beam ! Writing clean map to FITS file: J1340-0137_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.147599 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00029337 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.596286 0.596286 1.19257 2.38514 4.77029 9.54057 19.0811 38.1623 76.3246 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.147 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.773 x 6.735 at -2.432 degrees (North through East) ! Clean map min=-0.0018662 max=0.1476 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1340-0137_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:55:49 2019