! Started logfile: J1339-2620_S_2017_06_10_pus_uvs.log on Mon May 6 14:54:59 2019 obs J1339-2620_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1339-2620_S_2017_06_10_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.914184 visibilities/baseline/integration-bin. ! Found source: J1339-2620 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 15468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1339-2620_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 580 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.730427Jy sigma=0.005307 ! Fit after self-cal, rms=0.646934Jy sigma=0.004647 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=7.076 mas, bpa=-7.106 degrees ! Estimated noise=1469.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26586 Jy ! Component: 100 - total flux cleaned = 0.355609 Jy ! Total flux subtracted in 100 components = 0.355609 Jy ! Clean residual min=-0.017543 max=0.046432 Jy/beam ! Clean residual mean=-0.000068 rms=0.006554 Jy/beam ! Combined flux in latest and established models = 0.355609 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.355609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147622Jy sigma=0.001070 ! Fit after self-cal, rms=0.147610Jy sigma=0.001069 ! Inverting map ! Added new window around map position (3.5, -8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503758 Jy ! Component: 100 - total flux cleaned = 0.0822487 Jy ! Total flux subtracted in 100 components = 0.0822487 Jy ! Clean residual min=-0.015094 max=0.033693 Jy/beam ! Clean residual mean=-0.000029 rms=0.004609 Jy/beam ! Combined flux in latest and established models = 0.437858 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 35 components and 0.437858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123845Jy sigma=0.000869 ! Fit after self-cal, rms=0.123066Jy sigma=0.000861 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=7.865 mas, bpa=-5.709 degrees ! Estimated noise=928.559 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036963 Jy ! Component: 100 - total flux cleaned = 0.0584317 Jy ! Component: 150 - total flux cleaned = 0.0721189 Jy ! Component: 200 - total flux cleaned = 0.0812992 Jy ! Total flux subtracted in 200 components = 0.0812992 Jy ! Clean residual min=-0.012650 max=0.012078 Jy/beam ! Clean residual mean=0.000003 rms=0.003078 Jy/beam ! Combined flux in latest and established models = 0.519157 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 86 components and 0.519157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111278Jy sigma=0.000765 ! Fit after self-cal, rms=0.111154Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.11 KP 1.04 ! LA 1.02 MK 1.02 NL 0.89 OV 0.97 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.16 KP 1.01 ! LA 0.97 MK 0.99 NL 1.05 OV 0.98 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.12 KP 1.01 ! LA 0.97 MK 1.03 NL 0.99 OV 0.90 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.16 KP 1.00* ! LA 1.00* MK 1.16 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.111154Jy sigma=0.000764 ! Fit after self-cal, rms=0.110320Jy sigma=0.000733 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.861 mas, bpa=-5.069 degrees ! Estimated noise=927.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192315 Jy ! Component: 100 - total flux cleaned = -0.00254653 Jy ! Component: 150 - total flux cleaned = -0.00307449 Jy ! Component: 200 - total flux cleaned = -0.00338531 Jy ! Total flux subtracted in 200 components = -0.00338531 Jy ! Clean residual min=-0.010163 max=0.009503 Jy/beam ! Clean residual mean=-0.000012 rms=0.002501 Jy/beam ! Combined flux in latest and established models = 0.515772 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.515772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109516Jy sigma=0.000730 ! Fit after self-cal, rms=0.109540Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109540Jy sigma=0.000729 ! Fit after self-cal, rms=0.110252Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=7.841 mas, bpa=-5.369 degrees ! Estimated noise=933.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00255253 Jy ! Component: 100 - total flux cleaned = -0.00287516 Jy ! Component: 150 - total flux cleaned = -0.00328719 Jy ! Component: 200 - total flux cleaned = -0.00352048 Jy ! Total flux subtracted in 200 components = -0.00352048 Jy ! Clean residual min=-0.005303 max=0.006231 Jy/beam ! Clean residual mean=0.000001 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.512251 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 126 components and 0.512251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109834Jy sigma=0.000688 ! Fit after self-cal, rms=0.109919Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599436 Jy ! Component: 100 - total flux cleaned = 0.00783253 Jy ! Component: 150 - total flux cleaned = 0.00885222 Jy ! Component: 200 - total flux cleaned = 0.00955347 Jy ! Total flux subtracted in 200 components = 0.00955347 Jy ! Clean residual min=-0.005014 max=0.004551 Jy/beam ! Clean residual mean=0.000015 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.521804 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 150 components and 0.521805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109547Jy sigma=0.000684 ! Fit after self-cal, rms=0.109517Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109517Jy sigma=0.000684 ! Fit after self-cal, rms=0.110229Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=7.838 mas, bpa=-5.391 degrees ! Estimated noise=931.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162781 Jy ! Component: 100 - total flux cleaned = -0.00151533 Jy ! Component: 150 - total flux cleaned = -0.00141135 Jy ! Component: 200 - total flux cleaned = -0.0012247 Jy ! Total flux subtracted in 200 components = -0.0012247 Jy ! Clean residual min=-0.004254 max=0.004185 Jy/beam ! Clean residual mean=0.000006 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.52058 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 166 components and 0.52058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109991Jy sigma=0.000682 ! Fit after self-cal, rms=0.109987Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.13011e-05 Jy ! Component: 100 - total flux cleaned = 0.00049385 Jy ! Component: 150 - total flux cleaned = 0.000724786 Jy ! Component: 200 - total flux cleaned = 0.000867822 Jy ! Total flux subtracted in 200 components = 0.000867822 Jy ! Clean residual min=-0.004137 max=0.003935 Jy/beam ! Clean residual mean=0.000007 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.521448 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 173 components and 0.521448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109869Jy sigma=0.000681 ! Fit after self-cal, rms=0.109862Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109862Jy sigma=0.000681 ! Fit after self-cal, rms=0.110542Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.615 mas, bmaj=18.92 mas, bpa=-1.713 degrees ! Estimated noise=1180.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000930008 Jy ! Component: 100 - total flux cleaned = -0.000932685 Jy ! Component: 150 - total flux cleaned = -0.000937309 Jy ! Component: 200 - total flux cleaned = -0.000868078 Jy ! Total flux subtracted in 200 components = -0.000868078 Jy ! Clean residual min=-0.004174 max=0.003390 Jy/beam ! Clean residual mean=0.000008 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.52058 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 188 components and 0.52058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110431Jy sigma=0.000680 ! Fit after self-cal, rms=0.110424Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379571 Jy ! Component: 100 - total flux cleaned = 0.000506933 Jy ! Component: 150 - total flux cleaned = 0.000563957 Jy ! Component: 200 - total flux cleaned = 0.000618136 Jy ! Total flux subtracted in 200 components = 0.000618136 Jy ! Clean residual min=-0.004060 max=0.003239 Jy/beam ! Clean residual mean=0.000010 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.521198 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 192 components and 0.521198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110376Jy sigma=0.000680 ! Fit after self-cal, rms=0.110370Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=7.835 mas, bpa=-5.406 degrees ! Estimated noise=930.171 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.009 x 7.835 at -5.406 degrees (North through East) ! Clean map min=-0.0036664 max=0.34059 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=7.004 mas, bpa=-7.039 degrees ! Estimated noise=1505.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.271524 Jy ! Component: 100 - total flux cleaned = 0.363106 Jy ! Component: 150 - total flux cleaned = 0.409989 Jy ! Component: 200 - total flux cleaned = 0.436581 Jy ! Total flux subtracted in 200 components = 0.436581 Jy ! Clean residual min=-0.008063 max=0.013668 Jy/beam ! Clean residual mean=-0.000035 rms=0.002408 Jy/beam ! Combined flux in latest and established models = 0.436581 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.436581 Jy ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=7.835 mas, bpa=-5.406 degrees ! Estimated noise=930.171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237806 Jy ! Component: 100 - total flux cleaned = 0.0384697 Jy ! Component: 150 - total flux cleaned = 0.0485534 Jy ! Component: 200 - total flux cleaned = 0.0561113 Jy ! Total flux subtracted in 200 components = 0.0561113 Jy ! Clean residual min=-0.004955 max=0.005315 Jy/beam ! Clean residual mean=-0.000032 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.492692 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 83 components and 0.492692 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.615 mas, bmaj=18.92 mas, bpa=-1.713 degrees ! Estimated noise=1180.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00940817 Jy ! Component: 100 - total flux cleaned = 0.0154026 Jy ! Component: 150 - total flux cleaned = 0.0195314 Jy ! Component: 200 - total flux cleaned = 0.022437 Jy ! Total flux subtracted in 200 components = 0.022437 Jy ! Clean residual min=-0.003925 max=0.004266 Jy/beam ! Clean residual mean=-0.000007 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.515129 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207876 Jy ! Component: 100 - total flux cleaned = 0.00358282 Jy ! Component: 150 - total flux cleaned = 0.00448569 Jy ! Component: 200 - total flux cleaned = 0.00478966 Jy ! Total flux subtracted in 200 components = 0.00478966 Jy ! Clean residual min=-0.003839 max=0.003644 Jy/beam ! Clean residual mean=0.000007 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.519919 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 144 components and 0.519919 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=7.835 mas, bpa=-5.406 degrees ! Estimated noise=930.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.2149e-05 Jy ! Component: 100 - total flux cleaned = 0.000325527 Jy ! Component: 150 - total flux cleaned = 0.000467454 Jy ! Component: 200 - total flux cleaned = 0.000406113 Jy ! Total flux subtracted in 200 components = 0.000406113 Jy ! Clean residual min=-0.003725 max=0.003350 Jy/beam ! Clean residual mean=0.000006 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.520325 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 163 components and 0.520325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110311Jy sigma=0.000679 ! Fit after self-cal, rms=0.110282Jy sigma=0.000679 wmodel J1339-2620_S_2017_06_10_pus_map.mod ! Writing 163 model components to file: J1339-2620_S_2017_06_10_pus_map.mod wobs J1339-2620_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1339-2620_S_2017_06_10_pus_uvs.fits wwins J1339-2620_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1339-2620_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000627287 Jy ! Component: 100 - total flux cleaned = -0.000962278 Jy ! Component: 150 - total flux cleaned = -0.00117277 Jy ! Component: 200 - total flux cleaned = -0.00142136 Jy ! Component: 250 - total flux cleaned = -0.00166234 Jy ! Component: 300 - total flux cleaned = -0.001939 Jy ! Component: 350 - total flux cleaned = -0.00216236 Jy ! Component: 400 - total flux cleaned = -0.00224875 Jy ! Component: 450 - total flux cleaned = -0.00233428 Jy ! Component: 500 - total flux cleaned = -0.00250173 Jy ! Component: 550 - total flux cleaned = -0.00258352 Jy ! Component: 600 - total flux cleaned = -0.00258398 Jy ! Component: 650 - total flux cleaned = -0.00270102 Jy ! Component: 700 - total flux cleaned = -0.00262505 Jy ! Component: 750 - total flux cleaned = -0.00255049 Jy ! Component: 800 - total flux cleaned = -0.00255001 Jy ! Component: 850 - total flux cleaned = -0.00244238 Jy ! Component: 900 - total flux cleaned = -0.00244127 Jy ! Component: 950 - total flux cleaned = -0.00226759 Jy ! Component: 1000 - total flux cleaned = -0.00223464 Jy ! Component: 1050 - total flux cleaned = -0.00216812 Jy ! Component: 1100 - total flux cleaned = -0.00213614 Jy ! Component: 1150 - total flux cleaned = -0.00216844 Jy ! Component: 1200 - total flux cleaned = -0.00210459 Jy ! Component: 1250 - total flux cleaned = -0.00219885 Jy ! Component: 1300 - total flux cleaned = -0.00213658 Jy ! Component: 1350 - total flux cleaned = -0.00213657 Jy ! Component: 1400 - total flux cleaned = -0.0020151 Jy ! Component: 1450 - total flux cleaned = -0.00192555 Jy ! Component: 1500 - total flux cleaned = -0.00180818 Jy ! Component: 1550 - total flux cleaned = -0.00183743 Jy ! Component: 1600 - total flux cleaned = -0.00192331 Jy ! Component: 1650 - total flux cleaned = -0.00183781 Jy ! Component: 1700 - total flux cleaned = -0.00172578 Jy ! Component: 1750 - total flux cleaned = -0.00180924 Jy ! Component: 1800 - total flux cleaned = -0.00189121 Jy ! Component: 1850 - total flux cleaned = -0.00186404 Jy ! Component: 1900 - total flux cleaned = -0.00189089 Jy ! Component: 1950 - total flux cleaned = -0.00189092 Jy ! Component: 2000 - total flux cleaned = -0.00194314 Jy ! Component: 2050 - total flux cleaned = -0.00196839 Jy ! Component: 2100 - total flux cleaned = -0.00181403 Jy ! Component: 2150 - total flux cleaned = -0.00176325 Jy ! Component: 2200 - total flux cleaned = -0.00181379 Jy ! Component: 2250 - total flux cleaned = -0.00176409 Jy ! Component: 2300 - total flux cleaned = -0.00166555 Jy ! Component: 2350 - total flux cleaned = -0.00166561 Jy ! Component: 2400 - total flux cleaned = -0.0015206 Jy ! Component: 2450 - total flux cleaned = -0.00147228 Jy ! Component: 2500 - total flux cleaned = -0.00142499 Jy ! Component: 2550 - total flux cleaned = -0.00140139 Jy ! Component: 2600 - total flux cleaned = -0.00130787 Jy ! Component: 2650 - total flux cleaned = -0.0011232 Jy ! Component: 2700 - total flux cleaned = -0.00110034 Jy ! Component: 2750 - total flux cleaned = -0.00112279 Jy ! Component: 2800 - total flux cleaned = -0.000988148 Jy ! Component: 2850 - total flux cleaned = -0.000898943 Jy ! Component: 2900 - total flux cleaned = -0.000854516 Jy ! Component: 2950 - total flux cleaned = -0.000788932 Jy ! Component: 3000 - total flux cleaned = -0.000745769 Jy ! Component: 3050 - total flux cleaned = -0.000703022 Jy ! Component: 3100 - total flux cleaned = -0.000660224 Jy ! Component: 3150 - total flux cleaned = -0.000575949 Jy ! Component: 3200 - total flux cleaned = -0.000555401 Jy ! Component: 3250 - total flux cleaned = -0.000472452 Jy ! Component: 3300 - total flux cleaned = -0.000492843 Jy ! Component: 3350 - total flux cleaned = -0.000411027 Jy ! Component: 3400 - total flux cleaned = -0.000370427 Jy ! Component: 3450 - total flux cleaned = -0.00033034 Jy ! Component: 3500 - total flux cleaned = -0.000270352 Jy ! Component: 3550 - total flux cleaned = -0.000230644 Jy ! Component: 3600 - total flux cleaned = -0.000171649 Jy ! Component: 3650 - total flux cleaned = -0.000210349 Jy ! Component: 3700 - total flux cleaned = -7.50233e-05 Jy ! Component: 3750 - total flux cleaned = -1.76476e-05 Jy ! Component: 3800 - total flux cleaned = 1.01363e-06 Jy ! Component: 3850 - total flux cleaned = 1.97085e-05 Jy ! Component: 3900 - total flux cleaned = -1.78299e-05 Jy ! Component: 3950 - total flux cleaned = 9.41755e-05 Jy ! Component: 4000 - total flux cleaned = 9.42045e-05 Jy ! Component: 4050 - total flux cleaned = 0.000149437 Jy ! Total flux subtracted in 4096 components = 0.000222362 Jy ! Clean residual min=-0.001165 max=0.001142 Jy/beam ! Clean residual mean=-0.000003 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.520547 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 480 components and 0.520547 Jy ![Exited script file: muppet] wmap "J1339-2620_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.009 x 7.835 at -5.406 degrees (North through East) ! Clean map min=-0.0023665 max=0.35053 Jy/beam ! Writing clean map to FITS file: J1339-2620_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.350527 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000346056 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.296174 0.296174 0.592348 1.1847 2.36939 4.73878 9.47756 18.9551 37.9103 75.8205 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.35 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.009 x 7.835 at -5.406 degrees (North through East) ! Clean map min=-0.0023665 max=0.35053 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1339-2620_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:55:04 2019