! Started logfile: J1339-1819_S_2017_10_21_pus_uvs.log on Sat May 11 20:59:01 2019 obs J1339-1819_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1339-1819_S_2017_10_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.871832 visibilities/baseline/integration-bin. ! Found source: J1339-1819 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 14312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1339-1819_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 582 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957513Jy sigma=0.008047 ! Fit after self-cal, rms=0.933757Jy sigma=0.007849 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.72 mas, bmaj=15.83 mas, bpa=-18.32 degrees ! Estimated noise=1290.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0540545 Jy ! Component: 100 - total flux cleaned = 0.0658589 Jy ! Total flux subtracted in 100 components = 0.0658589 Jy ! Clean residual min=-0.004177 max=0.004252 Jy/beam ! Clean residual mean=-0.000004 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.0658589 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0658589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092080Jy sigma=0.000717 ! Fit after self-cal, rms=0.091922Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=17.91 mas, bpa=-18.26 degrees ! Estimated noise=835.502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430055 Jy ! Component: 100 - total flux cleaned = 0.00644408 Jy ! Component: 150 - total flux cleaned = 0.00785948 Jy ! Component: 200 - total flux cleaned = 0.00884931 Jy ! Total flux subtracted in 200 components = 0.00884931 Jy ! Clean residual min=-0.002919 max=0.002899 Jy/beam ! Clean residual mean=-0.000006 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0747082 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 38 components and 0.0747082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091675Jy sigma=0.000714 ! Fit after self-cal, rms=0.091684Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.02 KP 1.16 ! LA 1.09 MK 1.03 NL 0.89 OV 1.03 ! PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.97 KP 1.07 ! LA 1.05 MK 0.98 NL 1.13 OV 1.09 ! PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.01 KP 1.08 ! LA 0.81 MK 1.04 NL 1.12 OV 1.02 ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.87 KP 1.00* ! LA 0.73 MK 0.98 NL 1.00* OV 1.00* ! PT 0.80 ! ! ! Fit before self-cal, rms=0.091684Jy sigma=0.000714 ! Fit after self-cal, rms=0.089680Jy sigma=0.000710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=17.97 mas, bpa=-18.19 degrees ! Estimated noise=842.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.36117e-05 Jy ! Component: 100 - total flux cleaned = -4.97104e-05 Jy ! Component: 150 - total flux cleaned = -4.89242e-05 Jy ! Component: 200 - total flux cleaned = -7.39061e-05 Jy ! Total flux subtracted in 200 components = -7.39061e-05 Jy ! Clean residual min=-0.002158 max=0.001875 Jy/beam ! Clean residual mean=0.000001 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0746343 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.0746343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089675Jy sigma=0.000710 ! Fit after self-cal, rms=0.089786Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089786Jy sigma=0.000710 ! Fit after self-cal, rms=0.089903Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=17.96 mas, bpa=-18.2 degrees ! Estimated noise=843.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122075 Jy ! Component: 100 - total flux cleaned = -7.46644e-05 Jy ! Component: 150 - total flux cleaned = -3.45597e-05 Jy ! Component: 200 - total flux cleaned = -1.0455e-05 Jy ! Total flux subtracted in 200 components = -1.0455e-05 Jy ! Clean residual min=-0.001960 max=0.002036 Jy/beam ! Clean residual mean=0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0746239 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.0746239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089897Jy sigma=0.000709 ! Fit after self-cal, rms=0.089969Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27706e-05 Jy ! Component: 100 - total flux cleaned = 0.00012154 Jy ! Component: 150 - total flux cleaned = 0.000151275 Jy ! Component: 200 - total flux cleaned = 0.000160528 Jy ! Total flux subtracted in 200 components = 0.000160528 Jy ! Clean residual min=-0.001986 max=0.002003 Jy/beam ! Clean residual mean=0.000000 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0747844 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.0747844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089965Jy sigma=0.000709 ! Fit after self-cal, rms=0.089969Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089969Jy sigma=0.000709 ! Fit after self-cal, rms=0.090395Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=17.92 mas, bpa=-18.19 degrees ! Estimated noise=846.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143091 Jy ! Component: 100 - total flux cleaned = 0.00020654 Jy ! Component: 150 - total flux cleaned = 0.000234351 Jy ! Component: 200 - total flux cleaned = 0.000272159 Jy ! Total flux subtracted in 200 components = 0.000272159 Jy ! Clean residual min=-0.001991 max=0.002069 Jy/beam ! Clean residual mean=0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0750566 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.0750565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090389Jy sigma=0.000709 ! Fit after self-cal, rms=0.090427Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62416e-05 Jy ! Component: 100 - total flux cleaned = 7.04142e-05 Jy ! Component: 150 - total flux cleaned = 8.08987e-05 Jy ! Component: 200 - total flux cleaned = 9.08e-05 Jy ! Total flux subtracted in 200 components = 9.08e-05 Jy ! Clean residual min=-0.001990 max=0.002051 Jy/beam ! Clean residual mean=0.000001 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0751473 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.0751473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090424Jy sigma=0.000709 ! Fit after self-cal, rms=0.090427Jy sigma=0.000709 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090427Jy sigma=0.000709 ! Fit after self-cal, rms=0.090691Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.75 mas, bmaj=25.2 mas, bpa=-9.457 degrees ! Estimated noise=1015.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379652 Jy ! Component: 100 - total flux cleaned = 0.000389963 Jy ! Component: 150 - total flux cleaned = 0.000400109 Jy ! Component: 200 - total flux cleaned = 0.000429132 Jy ! Total flux subtracted in 200 components = 0.000429132 Jy ! Clean residual min=-0.002254 max=0.002217 Jy/beam ! Clean residual mean=0.000002 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0755765 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 0.0755765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090689Jy sigma=0.000709 ! Fit after self-cal, rms=0.090708Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.86881e-05 Jy ! Component: 100 - total flux cleaned = 7.78604e-05 Jy ! Component: 150 - total flux cleaned = 7.79928e-05 Jy ! Component: 200 - total flux cleaned = 8.66355e-05 Jy ! Total flux subtracted in 200 components = 8.66355e-05 Jy ! Clean residual min=-0.002245 max=0.002210 Jy/beam ! Clean residual mean=0.000002 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0756631 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 102 components and 0.0756631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090707Jy sigma=0.000709 ! Fit after self-cal, rms=0.090710Jy sigma=0.000709 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=17.88 mas, bpa=-18.21 degrees ! Estimated noise=848.525 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 17.88 at -18.21 degrees (North through East) ! Clean map min=-0.0019704 max=0.068979 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=15.76 mas, bpa=-18.23 degrees ! Estimated noise=1326.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545118 Jy ! Component: 100 - total flux cleaned = 0.0664774 Jy ! Component: 150 - total flux cleaned = 0.0702669 Jy ! Component: 200 - total flux cleaned = 0.0724553 Jy ! Total flux subtracted in 200 components = 0.0724553 Jy ! Clean residual min=-0.003109 max=0.002968 Jy/beam ! Clean residual mean=0.000001 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0724553 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0724553 Jy ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=17.88 mas, bpa=-18.21 degrees ! Estimated noise=848.525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150163 Jy ! Component: 100 - total flux cleaned = 0.00202604 Jy ! Component: 150 - total flux cleaned = 0.00224148 Jy ! Component: 200 - total flux cleaned = 0.00241936 Jy ! Total flux subtracted in 200 components = 0.00241936 Jy ! Clean residual min=-0.002109 max=0.002165 Jy/beam ! Clean residual mean=0.000000 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0748747 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.0748747 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.75 mas, bmaj=25.2 mas, bpa=-9.457 degrees ! Estimated noise=1015.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504086 Jy ! Component: 100 - total flux cleaned = 0.000590439 Jy ! Component: 150 - total flux cleaned = 0.000613064 Jy ! Component: 200 - total flux cleaned = 0.000635002 Jy ! Total flux subtracted in 200 components = 0.000635002 Jy ! Clean residual min=-0.002242 max=0.002231 Jy/beam ! Clean residual mean=0.000001 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0755097 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04655e-05 Jy ! Component: 100 - total flux cleaned = 2.10468e-05 Jy ! Component: 150 - total flux cleaned = 3.11666e-05 Jy ! Component: 200 - total flux cleaned = 4.11337e-05 Jy ! Total flux subtracted in 200 components = 4.11337e-05 Jy ! Clean residual min=-0.002241 max=0.002221 Jy/beam ! Clean residual mean=0.000001 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0755508 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0755508 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=17.88 mas, bpa=-18.21 degrees ! Estimated noise=848.525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218333 Jy ! Component: 100 - total flux cleaned = -0.000218256 Jy ! Component: 150 - total flux cleaned = -0.000187378 Jy ! Component: 200 - total flux cleaned = -0.000158432 Jy ! Total flux subtracted in 200 components = -0.000158432 Jy ! Clean residual min=-0.002065 max=0.002112 Jy/beam ! Clean residual mean=0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0753924 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.0753924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090712Jy sigma=0.000709 ! Fit after self-cal, rms=0.090702Jy sigma=0.000709 wmodel J1339-1819_S_2017_10_21_pus_map.mod ! Writing 58 model components to file: J1339-1819_S_2017_10_21_pus_map.mod wobs J1339-1819_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1339-1819_S_2017_10_21_pus_uvs.fits wwins J1339-1819_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1339-1819_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133339 Jy ! Component: 100 - total flux cleaned = -0.000266416 Jy ! Component: 150 - total flux cleaned = -0.000114907 Jy ! Component: 200 - total flux cleaned = 8.93905e-05 Jy ! Component: 250 - total flux cleaned = 0.000341798 Jy ! Component: 300 - total flux cleaned = 0.000532451 Jy ! Component: 350 - total flux cleaned = 0.000742885 Jy ! Component: 400 - total flux cleaned = 0.000896932 Jy ! Component: 450 - total flux cleaned = 0.000996832 Jy ! Component: 500 - total flux cleaned = 0.00111846 Jy ! Component: 550 - total flux cleaned = 0.00118961 Jy ! Component: 600 - total flux cleaned = 0.00121282 Jy ! Component: 650 - total flux cleaned = 0.00121257 Jy ! Component: 700 - total flux cleaned = 0.00119039 Jy ! Component: 750 - total flux cleaned = 0.0011687 Jy ! Component: 800 - total flux cleaned = 0.00114797 Jy ! Component: 850 - total flux cleaned = 0.00116913 Jy ! Component: 900 - total flux cleaned = 0.00116916 Jy ! Component: 950 - total flux cleaned = 0.00118892 Jy ! Component: 1000 - total flux cleaned = 0.00118908 Jy ! Component: 1050 - total flux cleaned = 0.00126588 Jy ! Component: 1100 - total flux cleaned = 0.00132225 Jy ! Component: 1150 - total flux cleaned = 0.00141514 Jy ! Component: 1200 - total flux cleaned = 0.00146978 Jy ! Component: 1250 - total flux cleaned = 0.00157784 Jy ! Component: 1300 - total flux cleaned = 0.00166645 Jy ! Component: 1350 - total flux cleaned = 0.00173579 Jy ! Component: 1400 - total flux cleaned = 0.0018215 Jy ! Component: 1450 - total flux cleaned = 0.00193966 Jy ! Component: 1500 - total flux cleaned = 0.00202306 Jy ! Component: 1550 - total flux cleaned = 0.00210467 Jy ! Component: 1600 - total flux cleaned = 0.00216919 Jy ! Component: 1650 - total flux cleaned = 0.00223305 Jy ! Component: 1700 - total flux cleaned = 0.00228055 Jy ! Component: 1750 - total flux cleaned = 0.00237436 Jy ! Component: 1800 - total flux cleaned = 0.0024825 Jy ! Component: 1850 - total flux cleaned = 0.00255877 Jy ! Component: 1900 - total flux cleaned = 0.00267927 Jy ! Component: 1950 - total flux cleaned = 0.00278361 Jy ! Component: 2000 - total flux cleaned = 0.00287207 Jy ! Component: 2050 - total flux cleaned = 0.00294504 Jy ! Component: 2100 - total flux cleaned = 0.0030751 Jy ! Component: 2150 - total flux cleaned = 0.00318927 Jy ! Component: 2200 - total flux cleaned = 0.00324555 Jy ! Component: 2250 - total flux cleaned = 0.00335753 Jy ! Component: 2300 - total flux cleaned = 0.00346804 Jy ! Component: 2350 - total flux cleaned = 0.00355019 Jy ! Component: 2400 - total flux cleaned = 0.00360458 Jy ! Component: 2450 - total flux cleaned = 0.00371226 Jy ! Component: 2500 - total flux cleaned = 0.00373901 Jy ! Component: 2550 - total flux cleaned = 0.00384461 Jy ! Component: 2600 - total flux cleaned = 0.00390995 Jy ! Component: 2650 - total flux cleaned = 0.0040006 Jy ! Component: 2700 - total flux cleaned = 0.00403907 Jy ! Component: 2750 - total flux cleaned = 0.00410249 Jy ! Component: 2800 - total flux cleaned = 0.00415293 Jy ! Component: 2850 - total flux cleaned = 0.0042404 Jy ! Component: 2900 - total flux cleaned = 0.00424051 Jy ! Component: 2950 - total flux cleaned = 0.00430182 Jy ! Component: 3000 - total flux cleaned = 0.0043504 Jy ! Component: 3050 - total flux cleaned = 0.0044347 Jy ! Component: 3100 - total flux cleaned = 0.0044467 Jy ! Component: 3150 - total flux cleaned = 0.00452971 Jy ! Component: 3200 - total flux cleaned = 0.00457672 Jy ! Component: 3250 - total flux cleaned = 0.00469321 Jy ! Component: 3300 - total flux cleaned = 0.00473961 Jy ! Component: 3350 - total flux cleaned = 0.00484289 Jy ! Component: 3400 - total flux cleaned = 0.00485433 Jy ! Component: 3450 - total flux cleaned = 0.00496757 Jy ! Component: 3500 - total flux cleaned = 0.00504605 Jy ! Component: 3550 - total flux cleaned = 0.00511296 Jy ! Component: 3600 - total flux cleaned = 0.00515725 Jy ! Component: 3650 - total flux cleaned = 0.00523389 Jy ! Component: 3700 - total flux cleaned = 0.00527739 Jy ! Component: 3750 - total flux cleaned = 0.00541802 Jy ! Component: 3800 - total flux cleaned = 0.00544997 Jy ! Component: 3850 - total flux cleaned = 0.00551392 Jy ! Component: 3900 - total flux cleaned = 0.00555623 Jy ! Component: 3950 - total flux cleaned = 0.0056089 Jy ! Component: 4000 - total flux cleaned = 0.00569263 Jy ! Component: 4050 - total flux cleaned = 0.00573421 Jy ! Total flux subtracted in 4096 components = 0.00579622 Jy ! Clean residual min=-0.000568 max=0.000603 Jy/beam ! Clean residual mean=-0.000002 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0811886 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 334 components and 0.0811886 Jy ![Exited script file: muppet] wmap "J1339-1819_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 17.88 at -18.21 degrees (North through East) ! Clean map min=-0.0015485 max=0.069285 Jy/beam ! Writing clean map to FITS file: J1339-1819_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0692854 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018935 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.819871 0.819871 1.63974 3.27948 6.55897 13.1179 26.2359 52.4718 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 17.88 at -18.21 degrees (North through East) ! Clean map min=-0.0015485 max=0.069285 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1339-1819_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:59:06 2019