! Started logfile: J1339-1819_S_2017_02_19_pus_uvs.log on Sat May 4 18:52:25 2019 obs J1339-1819_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1339-1819_S_2017_02_19_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78634 visibilities/baseline/integration-bin. ! Found source: J1339-1819 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 30856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1339-1819_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 939 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960387Jy sigma=0.007009 ! Fit after self-cal, rms=0.937328Jy sigma=0.006852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=6.517 mas, bpa=-3.515 degrees ! Estimated noise=948.195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513566 Jy ! Component: 100 - total flux cleaned = 0.0626454 Jy ! Total flux subtracted in 100 components = 0.0626454 Jy ! Clean residual min=-0.002989 max=0.003819 Jy/beam ! Clean residual mean=-0.000001 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0626454 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0626454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095199Jy sigma=0.000654 ! Fit after self-cal, rms=0.094914Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.356 mas, bpa=-3.063 degrees ! Estimated noise=606.779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383762 Jy ! Component: 100 - total flux cleaned = 0.00531924 Jy ! Component: 150 - total flux cleaned = 0.00612811 Jy ! Component: 200 - total flux cleaned = 0.00662797 Jy ! Total flux subtracted in 200 components = 0.00662797 Jy ! Clean residual min=-0.002166 max=0.002339 Jy/beam ! Clean residual mean=0.000004 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0692733 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0692733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094727Jy sigma=0.000651 ! Fit after self-cal, rms=0.094704Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.11 KP 1.04 ! LA 1.02 MK 1.01 NL 0.93 OV 1.00 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.14 KP 0.99 ! LA 0.97 MK 0.98 NL 1.09 OV 1.06 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.03 HN 1.10 KP 0.92 ! LA 0.81 MK 1.04 NL 1.13 OV 0.96 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.97 KP 1.00* ! LA 0.76 MK 1.09 NL 1.00* OV 1.01 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.094704Jy sigma=0.000651 ! Fit after self-cal, rms=0.092602Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=7.319 mas, bpa=-2.373 degrees ! Estimated noise=605.564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.60892e-06 Jy ! Component: 100 - total flux cleaned = 3.28049e-05 Jy ! Component: 150 - total flux cleaned = 1.66238e-05 Jy ! Component: 200 - total flux cleaned = 4.34566e-06 Jy ! Total flux subtracted in 200 components = 4.34566e-06 Jy ! Clean residual min=-0.001977 max=0.001945 Jy/beam ! Clean residual mean=0.000004 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0692777 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.0692777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092590Jy sigma=0.000649 ! Fit after self-cal, rms=0.092569Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092569Jy sigma=0.000648 ! Fit after self-cal, rms=0.093930Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.286 mas, bpa=-2.296 degrees ! Estimated noise=606.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436818 Jy ! Component: 100 - total flux cleaned = 0.000412314 Jy ! Component: 150 - total flux cleaned = 0.000391757 Jy ! Component: 200 - total flux cleaned = 0.000373867 Jy ! Total flux subtracted in 200 components = 0.000373867 Jy ! Clean residual min=-0.001545 max=0.001410 Jy/beam ! Clean residual mean=0.000003 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0696515 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0696516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093926Jy sigma=0.000647 ! Fit after self-cal, rms=0.093998Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.87216e-05 Jy ! Component: 100 - total flux cleaned = 7.11391e-05 Jy ! Component: 150 - total flux cleaned = 6.4187e-05 Jy ! Component: 200 - total flux cleaned = 6.40537e-05 Jy ! Total flux subtracted in 200 components = 6.40537e-05 Jy ! Clean residual min=-0.001612 max=0.001477 Jy/beam ! Clean residual mean=0.000003 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0697156 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0697156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093998Jy sigma=0.000647 ! Fit after self-cal, rms=0.093999Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093999Jy sigma=0.000647 ! Fit after self-cal, rms=0.095098Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.26 mas, bpa=-2.207 degrees ! Estimated noise=606.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165433 Jy ! Component: 100 - total flux cleaned = 0.000154373 Jy ! Component: 150 - total flux cleaned = 0.000137829 Jy ! Component: 200 - total flux cleaned = 0.000124061 Jy ! Total flux subtracted in 200 components = 0.000124061 Jy ! Clean residual min=-0.001513 max=0.001602 Jy/beam ! Clean residual mean=0.000002 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0698397 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0698397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095096Jy sigma=0.000646 ! Fit after self-cal, rms=0.095142Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.59299e-05 Jy ! Component: 100 - total flux cleaned = -6.60385e-05 Jy ! Component: 150 - total flux cleaned = -6.60483e-05 Jy ! Component: 200 - total flux cleaned = -6.08481e-05 Jy ! Total flux subtracted in 200 components = -6.08481e-05 Jy ! Clean residual min=-0.001491 max=0.001570 Jy/beam ! Clean residual mean=0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0697788 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0697788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095141Jy sigma=0.000646 ! Fit after self-cal, rms=0.095144Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095144Jy sigma=0.000646 ! Fit after self-cal, rms=0.095439Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.946 mas, bmaj=13.98 mas, bpa=6.513 degrees ! Estimated noise=812.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.36526e-05 Jy ! Component: 100 - total flux cleaned = 7.61905e-05 Jy ! Component: 150 - total flux cleaned = 7.61248e-05 Jy ! Component: 200 - total flux cleaned = 6.50194e-05 Jy ! Total flux subtracted in 200 components = 6.50194e-05 Jy ! Clean residual min=-0.002019 max=0.001829 Jy/beam ! Clean residual mean=0.000005 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0698438 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0698438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095439Jy sigma=0.000646 ! Fit after self-cal, rms=0.095449Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.88516e-05 Jy ! Component: 100 - total flux cleaned = -6.51699e-05 Jy ! Component: 150 - total flux cleaned = -6.49625e-05 Jy ! Component: 200 - total flux cleaned = -7.52869e-05 Jy ! Total flux subtracted in 200 components = -7.52869e-05 Jy ! Clean residual min=-0.002026 max=0.001819 Jy/beam ! Clean residual mean=0.000005 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0697685 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0697685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095449Jy sigma=0.000646 ! Fit after self-cal, rms=0.095449Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.241 mas, bpa=-2.117 degrees ! Estimated noise=606.198 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.94 x 7.241 at -2.117 degrees (North through East) ! Clean map min=-0.0014338 max=0.066483 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=6.385 mas, bpa=-2.424 degrees ! Estimated noise=945.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513766 Jy ! Component: 100 - total flux cleaned = 0.0626686 Jy ! Component: 150 - total flux cleaned = 0.0662638 Jy ! Component: 200 - total flux cleaned = 0.0683086 Jy ! Total flux subtracted in 200 components = 0.0683086 Jy ! Clean residual min=-0.002152 max=0.002489 Jy/beam ! Clean residual mean=-0.000000 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0683086 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0683086 Jy ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.241 mas, bpa=-2.117 degrees ! Estimated noise=606.198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134825 Jy ! Component: 100 - total flux cleaned = 0.00146367 Jy ! Component: 150 - total flux cleaned = 0.00154282 Jy ! Component: 200 - total flux cleaned = 0.00150795 Jy ! Total flux subtracted in 200 components = 0.00150795 Jy ! Clean residual min=-0.001548 max=0.001588 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0698166 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.0698166 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.946 mas, bmaj=13.98 mas, bpa=6.513 degrees ! Estimated noise=812.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.25042e-05 Jy ! Component: 100 - total flux cleaned = -8.28577e-05 Jy ! Component: 150 - total flux cleaned = -8.29864e-05 Jy ! Component: 200 - total flux cleaned = -8.3355e-05 Jy ! Total flux subtracted in 200 components = -8.3355e-05 Jy ! Clean residual min=-0.002028 max=0.001824 Jy/beam ! Clean residual mean=0.000005 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0697332 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.62593e-06 Jy ! Component: 100 - total flux cleaned = -1.59008e-05 Jy ! Component: 150 - total flux cleaned = -2.09616e-05 Jy ! Component: 200 - total flux cleaned = -3.03823e-05 Jy ! Total flux subtracted in 200 components = -3.03823e-05 Jy ! Clean residual min=-0.002026 max=0.001820 Jy/beam ! Clean residual mean=0.000005 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0697028 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.0697028 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.241 mas, bpa=-2.117 degrees ! Estimated noise=606.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.15888e-05 Jy ! Component: 100 - total flux cleaned = -2.81042e-05 Jy ! Component: 150 - total flux cleaned = -3.71176e-05 Jy ! Component: 200 - total flux cleaned = -3.7091e-05 Jy ! Total flux subtracted in 200 components = -3.7091e-05 Jy ! Clean residual min=-0.001514 max=0.001637 Jy/beam ! Clean residual mean=0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0696658 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.0696658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095451Jy sigma=0.000646 ! Fit after self-cal, rms=0.095454Jy sigma=0.000646 wmodel J1339-1819_S_2017_02_19_pus_map.mod ! Writing 50 model components to file: J1339-1819_S_2017_02_19_pus_map.mod wobs J1339-1819_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1339-1819_S_2017_02_19_pus_uvs.fits wwins J1339-1819_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1339-1819_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180043 Jy ! Component: 100 - total flux cleaned = 0.000258643 Jy ! Component: 150 - total flux cleaned = 0.000308225 Jy ! Component: 200 - total flux cleaned = 0.000500142 Jy ! Component: 250 - total flux cleaned = 0.000732685 Jy ! Component: 300 - total flux cleaned = 0.000981825 Jy ! Component: 350 - total flux cleaned = 0.00118018 Jy ! Component: 400 - total flux cleaned = 0.00139575 Jy ! Component: 450 - total flux cleaned = 0.00162682 Jy ! Component: 500 - total flux cleaned = 0.00175006 Jy ! Component: 550 - total flux cleaned = 0.00187218 Jy ! Component: 600 - total flux cleaned = 0.00199273 Jy ! Component: 650 - total flux cleaned = 0.00215018 Jy ! Component: 700 - total flux cleaned = 0.002228 Jy ! Component: 750 - total flux cleaned = 0.00241872 Jy ! Component: 800 - total flux cleaned = 0.00249425 Jy ! Component: 850 - total flux cleaned = 0.00267877 Jy ! Component: 900 - total flux cleaned = 0.00269662 Jy ! Component: 950 - total flux cleaned = 0.00280466 Jy ! Component: 1000 - total flux cleaned = 0.00291122 Jy ! Component: 1050 - total flux cleaned = 0.00299898 Jy ! Component: 1100 - total flux cleaned = 0.00312031 Jy ! Component: 1150 - total flux cleaned = 0.00317134 Jy ! Component: 1200 - total flux cleaned = 0.00334065 Jy ! Component: 1250 - total flux cleaned = 0.00335724 Jy ! Component: 1300 - total flux cleaned = 0.00343999 Jy ! Component: 1350 - total flux cleaned = 0.00360352 Jy ! Component: 1400 - total flux cleaned = 0.00368423 Jy ! Component: 1450 - total flux cleaned = 0.00377989 Jy ! Component: 1500 - total flux cleaned = 0.00390646 Jy ! Component: 1550 - total flux cleaned = 0.00401592 Jy ! Component: 1600 - total flux cleaned = 0.00412411 Jy ! Component: 1650 - total flux cleaned = 0.0041852 Jy ! Component: 1700 - total flux cleaned = 0.00423037 Jy ! Component: 1750 - total flux cleaned = 0.00433533 Jy ! Component: 1800 - total flux cleaned = 0.00443937 Jy ! Component: 1850 - total flux cleaned = 0.00452799 Jy ! Component: 1900 - total flux cleaned = 0.00457187 Jy ! Component: 1950 - total flux cleaned = 0.0046589 Jy ! Component: 2000 - total flux cleaned = 0.00470171 Jy ! Component: 2050 - total flux cleaned = 0.00477297 Jy ! Component: 2100 - total flux cleaned = 0.00482934 Jy ! Component: 2150 - total flux cleaned = 0.00492706 Jy ! Component: 2200 - total flux cleaned = 0.00494084 Jy ! Component: 2250 - total flux cleaned = 0.00503688 Jy ! Component: 2300 - total flux cleaned = 0.00510486 Jy ! Component: 2350 - total flux cleaned = 0.00518573 Jy ! Component: 2400 - total flux cleaned = 0.00522587 Jy ! Component: 2450 - total flux cleaned = 0.00529243 Jy ! Component: 2500 - total flux cleaned = 0.00535809 Jy ! Component: 2550 - total flux cleaned = 0.00543627 Jy ! Component: 2600 - total flux cleaned = 0.00546211 Jy ! Component: 2650 - total flux cleaned = 0.00550059 Jy ! Component: 2700 - total flux cleaned = 0.00553886 Jy ! Component: 2750 - total flux cleaned = 0.00562727 Jy ! Component: 2800 - total flux cleaned = 0.00561464 Jy ! Component: 2850 - total flux cleaned = 0.00562716 Jy ! Component: 2900 - total flux cleaned = 0.00568901 Jy ! Component: 2950 - total flux cleaned = 0.00576272 Jy ! Component: 3000 - total flux cleaned = 0.00576262 Jy ! Component: 3050 - total flux cleaned = 0.0057506 Jy ! Component: 3100 - total flux cleaned = 0.00576271 Jy ! Component: 3150 - total flux cleaned = 0.00578664 Jy ! Component: 3200 - total flux cleaned = 0.00577483 Jy ! Component: 3250 - total flux cleaned = 0.00581027 Jy ! Component: 3300 - total flux cleaned = 0.00585677 Jy ! Component: 3350 - total flux cleaned = 0.00587996 Jy ! Component: 3400 - total flux cleaned = 0.00584538 Jy ! Component: 3450 - total flux cleaned = 0.0058227 Jy ! Component: 3500 - total flux cleaned = 0.00590223 Jy ! Component: 3550 - total flux cleaned = 0.00584572 Jy ! Component: 3600 - total flux cleaned = 0.00587931 Jy ! Component: 3650 - total flux cleaned = 0.00586819 Jy ! Component: 3700 - total flux cleaned = 0.00585701 Jy ! Component: 3750 - total flux cleaned = 0.00586797 Jy ! Component: 3800 - total flux cleaned = 0.00587889 Jy ! Component: 3850 - total flux cleaned = 0.00584634 Jy ! Component: 3900 - total flux cleaned = 0.00582483 Jy ! Component: 3950 - total flux cleaned = 0.00583571 Jy ! Component: 4000 - total flux cleaned = 0.00584625 Jy ! Component: 4050 - total flux cleaned = 0.00585676 Jy ! Total flux subtracted in 4096 components = 0.00585677 Jy ! Clean residual min=-0.000586 max=0.000641 Jy/beam ! Clean residual mean=0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0755225 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 349 components and 0.0755226 Jy ![Exited script file: muppet] wmap "J1339-1819_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.94 x 7.241 at -2.117 degrees (North through East) ! Clean map min=-0.0010957 max=0.066388 Jy/beam ! Writing clean map to FITS file: J1339-1819_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0663877 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191321 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.864561 0.864561 1.72912 3.45824 6.91649 13.833 27.666 55.3319 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.94 x 7.241 at -2.117 degrees (North through East) ! Clean map min=-0.0010957 max=0.066388 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1339-1819_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:52:30 2019