! Started logfile: J1339+6328_S_2017_06_10_pus_uvs.log on Mon May 6 14:55:04 2019 obs J1339+6328_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1339+6328_S_2017_06_10_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95754 visibilities/baseline/integration-bin. ! Found source: J1339+6328 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 19304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1339+6328_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 617 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.706913Jy sigma=0.006616 ! Fit after self-cal, rms=0.672188Jy sigma=0.006319 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=3.837 mas, bpa=-82.2 degrees ! Estimated noise=957.164 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24939 Jy ! Component: 100 - total flux cleaned = 0.333572 Jy ! Total flux subtracted in 100 components = 0.333572 Jy ! Clean residual min=-0.011669 max=0.037015 Jy/beam ! Clean residual mean=-0.000043 rms=0.003193 Jy/beam ! Combined flux in latest and established models = 0.333572 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.333572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113063Jy sigma=0.001017 ! Fit after self-cal, rms=0.112455Jy sigma=0.001012 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418959 Jy ! Component: 100 - total flux cleaned = 0.0636296 Jy ! Total flux subtracted in 100 components = 0.0636296 Jy ! Clean residual min=-0.007626 max=0.025394 Jy/beam ! Clean residual mean=-0.000013 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 0.397201 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.397201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092584Jy sigma=0.000822 ! Fit after self-cal, rms=0.092401Jy sigma=0.000820 ! Inverting map ! Added new window around map position (-2.5, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217683 Jy ! Component: 100 - total flux cleaned = 0.0315669 Jy ! Total flux subtracted in 100 components = 0.0315669 Jy ! Clean residual min=-0.005633 max=0.008573 Jy/beam ! Clean residual mean=0.000001 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.428768 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.428768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086698Jy sigma=0.000769 ! Fit after self-cal, rms=0.086018Jy sigma=0.000763 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885806 Jy ! Component: 100 - total flux cleaned = 0.0135707 Jy ! Total flux subtracted in 100 components = 0.0135707 Jy ! Clean residual min=-0.005113 max=0.005143 Jy/beam ! Clean residual mean=0.000007 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.442339 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.442339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085027Jy sigma=0.000756 ! Fit after self-cal, rms=0.084909Jy sigma=0.000755 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=4.583 mas, bpa=-86.2 degrees ! Estimated noise=619.413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309742 Jy ! Component: 100 - total flux cleaned = 0.00331122 Jy ! Component: 150 - total flux cleaned = 0.00354873 Jy ! Component: 200 - total flux cleaned = 0.00377767 Jy ! Total flux subtracted in 200 components = 0.00377767 Jy ! Clean residual min=-0.004802 max=0.004351 Jy/beam ! Clean residual mean=0.000029 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.446117 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 0.446116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084733Jy sigma=0.000753 ! Fit after self-cal, rms=0.084696Jy sigma=0.000753 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 0.99 KP 1.04 ! LA 1.02 MK 1.03 NL 0.91 OV 0.96 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.02 KP 1.00 ! LA 0.98 MK 1.03 NL 1.05 OV 1.07 ! PT 1.01 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.98 HN 1.01 KP 1.00 ! LA 1.01 MK 1.04 NL 0.99 OV 0.95 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 1.00* ! LA 1.10 MK 1.00 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.084696Jy sigma=0.000753 ! Fit after self-cal, rms=0.081649Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=4.612 mas, bpa=-86.84 degrees ! Estimated noise=624.682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188093 Jy ! Component: 100 - total flux cleaned = 0.00195465 Jy ! Component: 150 - total flux cleaned = 0.00195653 Jy ! Component: 200 - total flux cleaned = 0.00200501 Jy ! Total flux subtracted in 200 components = 0.00200501 Jy ! Clean residual min=-0.003299 max=0.003592 Jy/beam ! Clean residual mean=0.000011 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.448121 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.448121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081523Jy sigma=0.000718 ! Fit after self-cal, rms=0.081505Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081505Jy sigma=0.000718 ! Fit after self-cal, rms=0.077310Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.951 mas, bmaj=4.61 mas, bpa=-87.05 degrees ! Estimated noise=623.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085351 Jy ! Component: 100 - total flux cleaned = 0.000810144 Jy ! Component: 150 - total flux cleaned = 0.000845608 Jy ! Component: 200 - total flux cleaned = 0.00087695 Jy ! Total flux subtracted in 200 components = 0.00087695 Jy ! Clean residual min=-0.002051 max=0.001748 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.448998 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.448998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077258Jy sigma=0.000685 ! Fit after self-cal, rms=0.077250Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183946 Jy ! Component: 100 - total flux cleaned = 0.000154359 Jy ! Component: 150 - total flux cleaned = 0.000103036 Jy ! Component: 200 - total flux cleaned = 8.0433e-05 Jy ! Total flux subtracted in 200 components = 8.0433e-05 Jy ! Clean residual min=-0.002063 max=0.001749 Jy/beam ! Clean residual mean=-0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.449079 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.449079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077229Jy sigma=0.000685 ! Fit after self-cal, rms=0.077225Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077225Jy sigma=0.000685 ! Fit after self-cal, rms=0.077183Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.955 mas, bmaj=4.612 mas, bpa=-87.08 degrees ! Estimated noise=624.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89714e-05 Jy ! Component: 100 - total flux cleaned = 2.86898e-06 Jy ! Component: 150 - total flux cleaned = -7.27274e-05 Jy ! Component: 200 - total flux cleaned = -0.000137629 Jy ! Total flux subtracted in 200 components = -0.000137629 Jy ! Clean residual min=-0.001981 max=0.001676 Jy/beam ! Clean residual mean=-0.000000 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.448941 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.448941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077162Jy sigma=0.000684 ! Fit after self-cal, rms=0.077156Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.45151e-05 Jy ! Component: 100 - total flux cleaned = 2.20066e-05 Jy ! Component: 150 - total flux cleaned = 2.13688e-05 Jy ! Component: 200 - total flux cleaned = -1.59097e-05 Jy ! Total flux subtracted in 200 components = -1.59097e-05 Jy ! Clean residual min=-0.001975 max=0.001670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.448925 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.448925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077144Jy sigma=0.000684 ! Fit after self-cal, rms=0.077141Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077141Jy sigma=0.000684 ! Fit after self-cal, rms=0.077187Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.825 mas, bmaj=9.313 mas, bpa=77.33 degrees ! Estimated noise=789.979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.66238e-05 Jy ! Component: 100 - total flux cleaned = 4.02488e-05 Jy ! Component: 150 - total flux cleaned = 3.97759e-05 Jy ! Component: 200 - total flux cleaned = 3.46146e-05 Jy ! Total flux subtracted in 200 components = 3.46146e-05 Jy ! Clean residual min=-0.001769 max=0.001831 Jy/beam ! Clean residual mean=0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.44896 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.44896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077185Jy sigma=0.000684 ! Fit after self-cal, rms=0.077184Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.91009e-05 Jy ! Component: 100 - total flux cleaned = 1.93208e-05 Jy ! Component: 150 - total flux cleaned = 1.94621e-05 Jy ! Component: 200 - total flux cleaned = 1.08883e-05 Jy ! Total flux subtracted in 200 components = 1.08883e-05 Jy ! Clean residual min=-0.001765 max=0.001822 Jy/beam ! Clean residual mean=0.000000 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.448971 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.448971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077182Jy sigma=0.000684 ! Fit after self-cal, rms=0.077181Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.959 mas, bmaj=4.614 mas, bpa=-87.1 degrees ! Estimated noise=624.245 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.959 x 4.614 at -87.1 degrees (North through East) ! Clean map min=-0.0018983 max=0.32492 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=3.876 mas, bpa=-83.24 degrees ! Estimated noise=962.883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250385 Jy ! Component: 100 - total flux cleaned = 0.336843 Jy ! Component: 150 - total flux cleaned = 0.381589 Jy ! Component: 200 - total flux cleaned = 0.406573 Jy ! Total flux subtracted in 200 components = 0.406573 Jy ! Clean residual min=-0.004510 max=0.012532 Jy/beam ! Clean residual mean=-0.000018 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.406573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.406573 Jy ! Inverting map and beam ! Estimated beam: bmin=3.959 mas, bmaj=4.614 mas, bpa=-87.1 degrees ! Estimated noise=624.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190252 Jy ! Component: 100 - total flux cleaned = 0.0291674 Jy ! Component: 150 - total flux cleaned = 0.0348178 Jy ! Component: 200 - total flux cleaned = 0.0381499 Jy ! Total flux subtracted in 200 components = 0.0381499 Jy ! Clean residual min=-0.002010 max=0.001902 Jy/beam ! Clean residual mean=-0.000005 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.444723 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 0.444723 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.825 mas, bmaj=9.313 mas, bpa=77.33 degrees ! Estimated noise=789.979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243021 Jy ! Component: 100 - total flux cleaned = 0.00337946 Jy ! Component: 150 - total flux cleaned = 0.00378032 Jy ! Component: 200 - total flux cleaned = 0.00383572 Jy ! Total flux subtracted in 200 components = 0.00383572 Jy ! Clean residual min=-0.001782 max=0.001813 Jy/beam ! Clean residual mean=-0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.448558 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76625e-05 Jy ! Component: 100 - total flux cleaned = 7.73591e-05 Jy ! Component: 150 - total flux cleaned = 0.000110749 Jy ! Component: 200 - total flux cleaned = 0.000133492 Jy ! Total flux subtracted in 200 components = 0.000133492 Jy ! Clean residual min=-0.001785 max=0.001819 Jy/beam ! Clean residual mean=-0.000000 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.448692 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 63 components and 0.448692 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.959 mas, bmaj=4.614 mas, bpa=-87.1 degrees ! Estimated noise=624.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391922 Jy ! Component: 100 - total flux cleaned = -0.000204747 Jy ! Component: 150 - total flux cleaned = -0.000125462 Jy ! Component: 200 - total flux cleaned = -0.000124622 Jy ! Total flux subtracted in 200 components = -0.000124622 Jy ! Clean residual min=-0.001879 max=0.001741 Jy/beam ! Clean residual mean=-0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.448567 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.448567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077245Jy sigma=0.000684 ! Fit after self-cal, rms=0.077225Jy sigma=0.000684 wmodel J1339+6328_S_2017_06_10_pus_map.mod ! Writing 70 model components to file: J1339+6328_S_2017_06_10_pus_map.mod wobs J1339+6328_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1339+6328_S_2017_06_10_pus_uvs.fits wwins J1339+6328_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J1339+6328_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473218 Jy ! Component: 100 - total flux cleaned = -0.000442202 Jy ! Component: 150 - total flux cleaned = -0.000442607 Jy ! Component: 200 - total flux cleaned = -0.000527892 Jy ! Component: 250 - total flux cleaned = -0.000527716 Jy ! Component: 300 - total flux cleaned = -0.000528336 Jy ! Component: 350 - total flux cleaned = -0.000580562 Jy ! Component: 400 - total flux cleaned = -0.000554875 Jy ! Component: 450 - total flux cleaned = -0.000529571 Jy ! Component: 500 - total flux cleaned = -0.000480444 Jy ! Component: 550 - total flux cleaned = -0.000576721 Jy ! Component: 600 - total flux cleaned = -0.000552632 Jy ! Component: 650 - total flux cleaned = -0.000529419 Jy ! Component: 700 - total flux cleaned = -0.000436803 Jy ! Component: 750 - total flux cleaned = -0.000459381 Jy ! Component: 800 - total flux cleaned = -0.000369091 Jy ! Component: 850 - total flux cleaned = -0.000391149 Jy ! Component: 900 - total flux cleaned = -0.000236588 Jy ! Component: 950 - total flux cleaned = -0.000171983 Jy ! Component: 1000 - total flux cleaned = -0.000150823 Jy ! Component: 1050 - total flux cleaned = -0.000129735 Jy ! Component: 1100 - total flux cleaned = -8.77659e-05 Jy ! Component: 1150 - total flux cleaned = -4.60415e-05 Jy ! Component: 1200 - total flux cleaned = -5.04916e-06 Jy ! Component: 1250 - total flux cleaned = 1.52937e-05 Jy ! Component: 1300 - total flux cleaned = 9.57649e-05 Jy ! Component: 1350 - total flux cleaned = 0.000115574 Jy ! Component: 1400 - total flux cleaned = 0.000154757 Jy ! Component: 1450 - total flux cleaned = 0.000194002 Jy ! Component: 1500 - total flux cleaned = 0.000174474 Jy ! Component: 1550 - total flux cleaned = 0.000309259 Jy ! Component: 1600 - total flux cleaned = 0.000251662 Jy ! Component: 1650 - total flux cleaned = 0.000251901 Jy ! Component: 1700 - total flux cleaned = 0.000364367 Jy ! Component: 1750 - total flux cleaned = 0.000308604 Jy ! Component: 1800 - total flux cleaned = 0.00034544 Jy ! Component: 1850 - total flux cleaned = 0.00038187 Jy ! Component: 1900 - total flux cleaned = 0.000382023 Jy ! Component: 1950 - total flux cleaned = 0.00038184 Jy ! Component: 2000 - total flux cleaned = 0.000381795 Jy ! Component: 2050 - total flux cleaned = 0.00038173 Jy ! Component: 2100 - total flux cleaned = 0.000399488 Jy ! Component: 2150 - total flux cleaned = 0.00043415 Jy ! Component: 2200 - total flux cleaned = 0.000451623 Jy ! Component: 2250 - total flux cleaned = 0.000520491 Jy ! Component: 2300 - total flux cleaned = 0.000520581 Jy ! Component: 2350 - total flux cleaned = 0.000520628 Jy ! Component: 2400 - total flux cleaned = 0.000587943 Jy ! Component: 2450 - total flux cleaned = 0.000604488 Jy ! Component: 2500 - total flux cleaned = 0.000620852 Jy ! Component: 2550 - total flux cleaned = 0.000686477 Jy ! Component: 2600 - total flux cleaned = 0.00070276 Jy ! Component: 2650 - total flux cleaned = 0.000637982 Jy ! Component: 2700 - total flux cleaned = 0.000654327 Jy ! Component: 2750 - total flux cleaned = 0.000734216 Jy ! Component: 2800 - total flux cleaned = 0.000749969 Jy ! Component: 2850 - total flux cleaned = 0.000734278 Jy ! Component: 2900 - total flux cleaned = 0.000812447 Jy ! Component: 2950 - total flux cleaned = 0.000843627 Jy ! Component: 3000 - total flux cleaned = 0.000827993 Jy ! Component: 3050 - total flux cleaned = 0.000812563 Jy ! Component: 3100 - total flux cleaned = 0.000904168 Jy ! Component: 3150 - total flux cleaned = 0.000904156 Jy ! Component: 3200 - total flux cleaned = 0.000858875 Jy ! Component: 3250 - total flux cleaned = 0.000903932 Jy ! Component: 3300 - total flux cleaned = 0.000918849 Jy ! Component: 3350 - total flux cleaned = 0.000933685 Jy ! Component: 3400 - total flux cleaned = 0.000963304 Jy ! Component: 3450 - total flux cleaned = 0.000948721 Jy ! Component: 3500 - total flux cleaned = 0.00100718 Jy ! Component: 3550 - total flux cleaned = 0.000963695 Jy ! Component: 3600 - total flux cleaned = 0.000963757 Jy ! Component: 3650 - total flux cleaned = 0.000992556 Jy ! Component: 3700 - total flux cleaned = 0.0010209 Jy ! Component: 3750 - total flux cleaned = 0.00102084 Jy ! Component: 3800 - total flux cleaned = 0.00104902 Jy ! Component: 3850 - total flux cleaned = 0.00113303 Jy ! Component: 3900 - total flux cleaned = 0.00107731 Jy ! Component: 3950 - total flux cleaned = 0.001105 Jy ! Component: 4000 - total flux cleaned = 0.0011049 Jy ! Component: 4050 - total flux cleaned = 0.00110493 Jy ! Total flux subtracted in 4096 components = 0.001105 Jy ! Clean residual min=-0.000902 max=0.000722 Jy/beam ! Clean residual mean=0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.449672 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 367 components and 0.449672 Jy ![Exited script file: muppet] wmap "J1339+6328_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.959 x 4.614 at -87.1 degrees (North through East) ! Clean map min=-0.0013357 max=0.3251 Jy/beam ! Writing clean map to FITS file: J1339+6328_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.325099 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241565 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.222915 0.222915 0.44583 0.89166 1.78332 3.56664 7.13328 14.2666 28.5331 57.0662 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.325 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.959 x 4.614 at -87.1 degrees (North through East) ! Clean map min=-0.0013357 max=0.3251 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1339+6328_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:55:09 2019