! Started logfile: J1337-1257_S_2017_07_09_pus_uvs.log on Wed May 8 14:49:15 2019 obs J1337-1257_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1337-1257_S_2017_07_09_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.31 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1337-1257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1337-1257_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.538137Jy sigma=0.009761 ! Fit after self-cal, rms=1.510793Jy sigma=0.009578 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.839 mas, bmaj=8.501 mas, bpa=-0.6822 degrees ! Estimated noise=4442.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93162 Jy ! Component: 100 - total flux cleaned = 2.35486 Jy ! Total flux subtracted in 100 components = 2.35486 Jy ! Clean residual min=-0.063440 max=0.132316 Jy/beam ! Clean residual mean=0.000964 rms=0.024200 Jy/beam ! Combined flux in latest and established models = 2.35486 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.35486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291662Jy sigma=0.001769 ! Fit after self-cal, rms=0.291655Jy sigma=0.001769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.382 mas, bmaj=9.278 mas, bpa=-0.3472 degrees ! Estimated noise=3885.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12996 Jy ! Component: 100 - total flux cleaned = 0.169786 Jy ! Component: 150 - total flux cleaned = 0.172244 Jy ! Component: 200 - total flux cleaned = 0.170099 Jy ! Total flux subtracted in 200 components = 0.170099 Jy ! Clean residual min=-0.059131 max=0.058623 Jy/beam ! Clean residual mean=-0.000444 rms=0.016510 Jy/beam ! Combined flux in latest and established models = 2.52496 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 2.52496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227189Jy sigma=0.001436 ! Fit after self-cal, rms=0.227160Jy sigma=0.001435 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.99 KP 1.00 ! LA 1.00 MK 1.00* NL 0.88 OV 0.99 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.04 KP 0.96 ! LA 0.96 MK 1.00* NL 1.01 OV 1.02 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.03 KP 1.00* ! LA 0.96 MK 1.00* NL 0.96 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.01 KP 1.00* ! LA 1.03 MK 1.00* NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.227160Jy sigma=0.001435 ! Fit after self-cal, rms=0.115471Jy sigma=0.000737 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.366 mas, bmaj=10.63 mas, bpa=-6.29 degrees ! Estimated noise=3976.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086639 Jy ! Component: 100 - total flux cleaned = 0.00931185 Jy ! Component: 150 - total flux cleaned = 0.0097257 Jy ! Component: 200 - total flux cleaned = 0.00997987 Jy ! Total flux subtracted in 200 components = 0.00997987 Jy ! Clean residual min=-0.012564 max=0.014995 Jy/beam ! Clean residual mean=0.000196 rms=0.003511 Jy/beam ! Combined flux in latest and established models = 2.53494 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 2.53494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114784Jy sigma=0.000732 ! Fit after self-cal, rms=0.114749Jy sigma=0.000731 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114749Jy sigma=0.000731 ! Fit after self-cal, rms=0.114733Jy sigma=0.000731 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.363 mas, bmaj=10.63 mas, bpa=-6.32 degrees ! Estimated noise=3976.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479426 Jy ! Component: 100 - total flux cleaned = 0.00524389 Jy ! Component: 150 - total flux cleaned = 0.00554923 Jy ! Component: 200 - total flux cleaned = 0.00582966 Jy ! Total flux subtracted in 200 components = 0.00582966 Jy ! Clean residual min=-0.011467 max=0.013706 Jy/beam ! Clean residual mean=0.000192 rms=0.003321 Jy/beam ! Combined flux in latest and established models = 2.54077 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 2.54077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114480Jy sigma=0.000729 ! Fit after self-cal, rms=0.114490Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507961 Jy ! Component: 100 - total flux cleaned = 0.000423051 Jy ! Component: 150 - total flux cleaned = 0.000419236 Jy ! Component: 200 - total flux cleaned = 0.000489828 Jy ! Total flux subtracted in 200 components = 0.000489828 Jy ! Clean residual min=-0.011215 max=0.013093 Jy/beam ! Clean residual mean=0.000190 rms=0.003252 Jy/beam ! Combined flux in latest and established models = 2.54126 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 2.54126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114379Jy sigma=0.000728 ! Fit after self-cal, rms=0.114385Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114385Jy sigma=0.000728 ! Fit after self-cal, rms=0.114407Jy sigma=0.000728 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.362 mas, bmaj=10.62 mas, bpa=-6.33 degrees ! Estimated noise=3976.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253689 Jy ! Component: 100 - total flux cleaned = 0.0028196 Jy ! Component: 150 - total flux cleaned = 0.00300752 Jy ! Component: 200 - total flux cleaned = 0.00323494 Jy ! Total flux subtracted in 200 components = 0.00323494 Jy ! Clean residual min=-0.010900 max=0.012427 Jy/beam ! Clean residual mean=0.000187 rms=0.003191 Jy/beam ! Combined flux in latest and established models = 2.54449 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 2.54449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114322Jy sigma=0.000727 ! Fit after self-cal, rms=0.114327Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153868 Jy ! Component: 100 - total flux cleaned = 0.000103398 Jy ! Component: 150 - total flux cleaned = 0.000198445 Jy ! Component: 200 - total flux cleaned = 0.000241795 Jy ! Total flux subtracted in 200 components = 0.000241795 Jy ! Clean residual min=-0.010835 max=0.012091 Jy/beam ! Clean residual mean=0.000186 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 2.54474 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 2.54473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114282Jy sigma=0.000727 ! Fit after self-cal, rms=0.114284Jy sigma=0.000727 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114284Jy sigma=0.000727 ! Fit after self-cal, rms=0.114309Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.476 mas, bmaj=13.11 mas, bpa=-11.17 degrees ! Estimated noise=4601.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936576 Jy ! Component: 100 - total flux cleaned = 0.00108023 Jy ! Component: 150 - total flux cleaned = 0.00127252 Jy ! Component: 200 - total flux cleaned = 0.00138414 Jy ! Total flux subtracted in 200 components = 0.00138414 Jy ! Clean residual min=-0.011217 max=0.013009 Jy/beam ! Clean residual mean=0.000308 rms=0.003997 Jy/beam ! Combined flux in latest and established models = 2.54612 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 2.54612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114266Jy sigma=0.000727 ! Fit after self-cal, rms=0.114259Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.42987e-05 Jy ! Component: 100 - total flux cleaned = 0.000192498 Jy ! Component: 150 - total flux cleaned = 0.000298395 Jy ! Component: 200 - total flux cleaned = 0.000394121 Jy ! Total flux subtracted in 200 components = 0.000394121 Jy ! Clean residual min=-0.011149 max=0.012810 Jy/beam ! Clean residual mean=0.000305 rms=0.003985 Jy/beam ! Combined flux in latest and established models = 2.54651 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 2.54651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114236Jy sigma=0.000727 ! Fit after self-cal, rms=0.114230Jy sigma=0.000727 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.361 mas, bmaj=10.62 mas, bpa=-6.332 degrees ! Estimated noise=3977.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.361 x 10.62 at -6.332 degrees (North through East) ! Clean map min=-0.010465 max=2.4812 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114230Jy sigma=0.000727 ! Fit after self-cal, rms=0.099628Jy sigma=0.000626 ! Inverting map and beam ! Estimated beam: bmin=5.361 mas, bmaj=10.62 mas, bpa=-6.327 degrees ! Estimated noise=3977.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736489 Jy ! Component: 100 - total flux cleaned = 0.00104726 Jy ! Component: 150 - total flux cleaned = 0.00118458 Jy ! Component: 200 - total flux cleaned = 0.00127736 Jy ! Total flux subtracted in 200 components = 0.00127736 Jy ! Clean residual min=-0.010380 max=0.011087 Jy/beam ! Clean residual mean=0.000164 rms=0.003107 Jy/beam ! Combined flux in latest and established models = 2.54779 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 2.54779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099608Jy sigma=0.000626 ! Fit after self-cal, rms=0.099607Jy sigma=0.000626 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.79238e-05 Jy ! Component: 100 - total flux cleaned = 0.000189286 Jy ! Component: 150 - total flux cleaned = 0.000215082 Jy ! Component: 200 - total flux cleaned = 0.000239434 Jy ! Total flux subtracted in 200 components = 0.000239434 Jy ! Clean residual min=-0.010425 max=0.010944 Jy/beam ! Clean residual mean=0.000163 rms=0.003102 Jy/beam ! Combined flux in latest and established models = 2.54803 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 2.54803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099594Jy sigma=0.000626 ! Fit after self-cal, rms=0.099594Jy sigma=0.000626 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099594Jy sigma=0.000626 ! Fit after self-cal, rms=0.099587Jy sigma=0.000626 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.793 mas, bmaj=9.613 mas, bpa=-5.487 degrees ! Estimated noise=4516.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.9303 Jy ! Component: 100 - total flux cleaned = 2.35146 Jy ! Component: 150 - total flux cleaned = 2.4638 Jy ! Component: 200 - total flux cleaned = 2.50706 Jy ! Total flux subtracted in 200 components = 2.50706 Jy ! Clean residual min=-0.015689 max=0.018715 Jy/beam ! Clean residual mean=0.000431 rms=0.004694 Jy/beam ! Combined flux in latest and established models = 2.50706 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.50706 Jy ! Inverting map and beam ! Estimated beam: bmin=5.361 mas, bmaj=10.62 mas, bpa=-6.322 degrees ! Estimated noise=3977.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239967 Jy ! Component: 100 - total flux cleaned = 0.0364002 Jy ! Component: 150 - total flux cleaned = 0.0440408 Jy ! Component: 200 - total flux cleaned = 0.047224 Jy ! Total flux subtracted in 200 components = 0.047224 Jy ! Clean residual min=-0.010856 max=0.009263 Jy/beam ! Clean residual mean=0.000175 rms=0.002818 Jy/beam ! Combined flux in latest and established models = 2.55428 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 54 components and 2.55428 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.474 mas, bmaj=13.11 mas, bpa=-11.16 degrees ! Estimated noise=4602.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201286 Jy ! Component: 100 - total flux cleaned = 0.00304828 Jy ! Component: 150 - total flux cleaned = 0.00365995 Jy ! Component: 200 - total flux cleaned = 0.00386857 Jy ! Total flux subtracted in 200 components = 0.00386857 Jy ! Clean residual min=-0.010829 max=0.010452 Jy/beam ! Clean residual mean=0.000268 rms=0.003340 Jy/beam ! Combined flux in latest and established models = 2.55815 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185873 Jy ! Component: 100 - total flux cleaned = 0.000348011 Jy ! Component: 150 - total flux cleaned = 0.000493301 Jy ! Component: 200 - total flux cleaned = 0.000560216 Jy ! Total flux subtracted in 200 components = 0.000560216 Jy ! Clean residual min=-0.010402 max=0.010135 Jy/beam ! Clean residual mean=0.000265 rms=0.003278 Jy/beam ! Combined flux in latest and established models = 2.55871 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 100 components and 2.55871 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.361 mas, bmaj=10.62 mas, bpa=-6.322 degrees ! Estimated noise=3977.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444948 Jy ! Component: 100 - total flux cleaned = -0.000380273 Jy ! Component: 150 - total flux cleaned = -0.000322076 Jy ! Component: 200 - total flux cleaned = -0.000217035 Jy ! Total flux subtracted in 200 components = -0.000217035 Jy ! Clean residual min=-0.009469 max=0.008143 Jy/beam ! Clean residual mean=0.000158 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 2.5585 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 2.5585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098612Jy sigma=0.000619 ! Fit after self-cal, rms=0.098594Jy sigma=0.000619 wmodel J1337-1257_S_2017_07_09_pus_map.mod ! Writing 120 model components to file: J1337-1257_S_2017_07_09_pus_map.mod wobs J1337-1257_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1337-1257_S_2017_07_09_pus_uvs.fits wwins J1337-1257_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J1337-1257_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331243 Jy ! Component: 100 - total flux cleaned = -0.0033118 Jy ! Component: 150 - total flux cleaned = -0.00269547 Jy ! Component: 200 - total flux cleaned = -0.00246878 Jy ! Component: 250 - total flux cleaned = -0.00236435 Jy ! Component: 300 - total flux cleaned = -0.00206932 Jy ! Component: 350 - total flux cleaned = -0.00169705 Jy ! Component: 400 - total flux cleaned = -0.00108837 Jy ! Component: 450 - total flux cleaned = -0.000437383 Jy ! Component: 500 - total flux cleaned = 0.000249052 Jy ! Component: 550 - total flux cleaned = 0.000826056 Jy ! Component: 600 - total flux cleaned = 0.00144885 Jy ! Component: 650 - total flux cleaned = 0.002171 Jy ! Component: 700 - total flux cleaned = 0.00285594 Jy ! Component: 750 - total flux cleaned = 0.00368707 Jy ! Component: 800 - total flux cleaned = 0.00448824 Jy ! Component: 850 - total flux cleaned = 0.0052063 Jy ! Component: 900 - total flux cleaned = 0.00606159 Jy ! Component: 950 - total flux cleaned = 0.0067862 Jy ! Component: 1000 - total flux cleaned = 0.00753636 Jy ! Component: 1050 - total flux cleaned = 0.00816688 Jy ! Component: 1100 - total flux cleaned = 0.00891975 Jy ! Component: 1150 - total flux cleaned = 0.00956021 Jy ! Component: 1200 - total flux cleaned = 0.0103168 Jy ! Component: 1250 - total flux cleaned = 0.0108796 Jy ! Component: 1300 - total flux cleaned = 0.0115114 Jy ! Component: 1350 - total flux cleaned = 0.0121262 Jy ! Component: 1400 - total flux cleaned = 0.012685 Jy ! Component: 1450 - total flux cleaned = 0.0131516 Jy ! Component: 1500 - total flux cleaned = 0.0136079 Jy ! Component: 1550 - total flux cleaned = 0.0139799 Jy ! Component: 1600 - total flux cleaned = 0.0142716 Jy ! Component: 1650 - total flux cleaned = 0.0145588 Jy ! Component: 1700 - total flux cleaned = 0.0149108 Jy ! Component: 1750 - total flux cleaned = 0.0152558 Jy ! Component: 1800 - total flux cleaned = 0.0155605 Jy ! Component: 1850 - total flux cleaned = 0.0158262 Jy ! Component: 1900 - total flux cleaned = 0.016218 Jy ! Component: 1950 - total flux cleaned = 0.0165717 Jy ! Component: 2000 - total flux cleaned = 0.0169832 Jy ! Component: 2050 - total flux cleaned = 0.0173885 Jy ! Component: 2100 - total flux cleaned = 0.0176957 Jy ! Component: 2150 - total flux cleaned = 0.018 Jy ! Component: 2200 - total flux cleaned = 0.0182712 Jy ! Component: 2250 - total flux cleaned = 0.0185992 Jy ! Component: 2300 - total flux cleaned = 0.0189239 Jy ! Component: 2350 - total flux cleaned = 0.0191577 Jy ! Component: 2400 - total flux cleaned = 0.0194187 Jy ! Component: 2450 - total flux cleaned = 0.019678 Jy ! Component: 2500 - total flux cleaned = 0.0199639 Jy ! Component: 2550 - total flux cleaned = 0.0201913 Jy ! Component: 2600 - total flux cleaned = 0.0204457 Jy ! Component: 2650 - total flux cleaned = 0.0206705 Jy ! Component: 2700 - total flux cleaned = 0.020894 Jy ! Component: 2750 - total flux cleaned = 0.0211166 Jy ! Component: 2800 - total flux cleaned = 0.0213381 Jy ! Component: 2850 - total flux cleaned = 0.0215038 Jy ! Component: 2900 - total flux cleaned = 0.0217517 Jy ! Component: 2950 - total flux cleaned = 0.0219446 Jy ! Component: 3000 - total flux cleaned = 0.0219723 Jy ! Component: 3050 - total flux cleaned = 0.021916 Jy ! Component: 3100 - total flux cleaned = 0.0219162 Jy ! Component: 3150 - total flux cleaned = 0.0218865 Jy ! Component: 3200 - total flux cleaned = 0.0218866 Jy ! Component: 3250 - total flux cleaned = 0.0218548 Jy ! Component: 3300 - total flux cleaned = 0.0218552 Jy ! Component: 3350 - total flux cleaned = 0.0218195 Jy ! Component: 3400 - total flux cleaned = 0.0218193 Jy ! Component: 3450 - total flux cleaned = 0.0218197 Jy ! Component: 3500 - total flux cleaned = 0.0217801 Jy ! Component: 3550 - total flux cleaned = 0.0217797 Jy ! Component: 3600 - total flux cleaned = 0.0217364 Jy ! Component: 3650 - total flux cleaned = 0.021736 Jy ! Component: 3700 - total flux cleaned = 0.0217373 Jy ! Component: 3750 - total flux cleaned = 0.0217379 Jy ! Component: 3800 - total flux cleaned = 0.0217395 Jy ! Component: 3850 - total flux cleaned = 0.0217404 Jy ! Component: 3900 - total flux cleaned = 0.0218032 Jy ! Component: 3950 - total flux cleaned = 0.0218038 Jy ! Component: 4000 - total flux cleaned = 0.0218036 Jy ! Component: 4050 - total flux cleaned = 0.0218768 Jy ! Total flux subtracted in 4096 components = 0.0218755 Jy ! Clean residual min=-0.004829 max=0.005196 Jy/beam ! Clean residual mean=0.000030 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 2.58037 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 398 components and 2.58037 Jy ![Exited script file: muppet] wmap "J1337-1257_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.361 x 10.62 at -6.322 degrees (North through East) ! Clean map min=-0.0057684 max=2.4714 Jy/beam ! Writing clean map to FITS file: J1337-1257_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.47141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000861125 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.104531 0.104531 0.209061 0.418122 0.836245 1.67249 3.34498 6.68996 13.3799 26.7598 53.5197 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.471 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.361 x 10.62 at -6.322 degrees (North through East) ! Clean map min=-0.0057684 max=2.4714 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1337-1257_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:49:19 2019