! Started logfile: J1337-1257_S_2017_06_10_pus_uvs.log on Mon May 6 14:54:55 2019 obs J1337-1257_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1337-1257_S_2017_06_10_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.248366 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1337-1257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1337-1257_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.428733Jy sigma=0.012838 ! Fit after self-cal, rms=1.405208Jy sigma=0.012689 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=10.07 mas, bpa=17.12 degrees ! Estimated noise=4267.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83094 Jy ! Component: 100 - total flux cleaned = 2.26252 Jy ! Total flux subtracted in 100 components = 2.26252 Jy ! Clean residual min=-0.086851 max=0.163987 Jy/beam ! Clean residual mean=0.000029 rms=0.031215 Jy/beam ! Combined flux in latest and established models = 2.26252 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.26252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271179Jy sigma=0.002364 ! Fit after self-cal, rms=0.271025Jy sigma=0.002363 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=11.61 mas, bpa=16.96 degrees ! Estimated noise=3341.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172454 Jy ! Component: 100 - total flux cleaned = 0.2378 Jy ! Component: 150 - total flux cleaned = 0.248237 Jy ! Component: 200 - total flux cleaned = 0.253384 Jy ! Total flux subtracted in 200 components = 0.253384 Jy ! Clean residual min=-0.025267 max=0.030051 Jy/beam ! Clean residual mean=0.000008 rms=0.007552 Jy/beam ! Combined flux in latest and established models = 2.51591 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 2.51591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146113Jy sigma=0.001270 ! Fit after self-cal, rms=0.146052Jy sigma=0.001269 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.96 KP 1.03 ! LA 1.02 MK 1.00* NL 0.90 OV 1.03 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.01 KP 0.99 ! LA 0.98 MK 1.00* NL 1.04 OV 1.05 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.01 KP 0.99 ! LA 0.99 MK 1.00* NL 0.98 OV 0.97 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.146052Jy sigma=0.001269 ! Fit after self-cal, rms=0.075137Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.58 mas, bpa=16.95 degrees ! Estimated noise=3329.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853335 Jy ! Component: 100 - total flux cleaned = 0.00895145 Jy ! Component: 150 - total flux cleaned = 0.00881417 Jy ! Component: 200 - total flux cleaned = 0.00870954 Jy ! Total flux subtracted in 200 components = 0.00870954 Jy ! Clean residual min=-0.009310 max=0.015143 Jy/beam ! Clean residual mean=0.000018 rms=0.003042 Jy/beam ! Combined flux in latest and established models = 2.52462 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 2.52462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073922Jy sigma=0.000666 ! Fit after self-cal, rms=0.073881Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073881Jy sigma=0.000666 ! Fit after self-cal, rms=0.073748Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.621 mas, bmaj=11.57 mas, bpa=16.95 degrees ! Estimated noise=3329.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256626 Jy ! Component: 100 - total flux cleaned = 0.00264489 Jy ! Component: 150 - total flux cleaned = 0.00251803 Jy ! Component: 200 - total flux cleaned = 0.00228504 Jy ! Total flux subtracted in 200 components = 0.00228504 Jy ! Clean residual min=-0.008999 max=0.015205 Jy/beam ! Clean residual mean=0.000016 rms=0.002910 Jy/beam ! Combined flux in latest and established models = 2.5269 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 2.5269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073555Jy sigma=0.000663 ! Fit after self-cal, rms=0.073547Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-84, 59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123437 Jy ! Component: 100 - total flux cleaned = 0.0163761 Jy ! Component: 150 - total flux cleaned = 0.0187208 Jy ! Component: 200 - total flux cleaned = 0.0207386 Jy ! Total flux subtracted in 200 components = 0.0207386 Jy ! Clean residual min=-0.006463 max=0.005972 Jy/beam ! Clean residual mean=0.000011 rms=0.001728 Jy/beam ! Combined flux in latest and established models = 2.54764 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 2.54764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071510Jy sigma=0.000645 ! Fit after self-cal, rms=0.071460Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071460Jy sigma=0.000644 ! Fit after self-cal, rms=0.071357Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.621 mas, bmaj=11.57 mas, bpa=16.94 degrees ! Estimated noise=3327.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349459 Jy ! Component: 100 - total flux cleaned = 0.00573231 Jy ! Component: 150 - total flux cleaned = 0.00726973 Jy ! Component: 200 - total flux cleaned = 0.00836585 Jy ! Total flux subtracted in 200 components = 0.00836585 Jy ! Clean residual min=-0.006023 max=0.004907 Jy/beam ! Clean residual mean=0.000006 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 2.55601 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 2.55601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071077Jy sigma=0.000641 ! Fit after self-cal, rms=0.071067Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162829 Jy ! Component: 100 - total flux cleaned = 0.00220007 Jy ! Component: 150 - total flux cleaned = 0.0025941 Jy ! Component: 200 - total flux cleaned = 0.00283782 Jy ! Total flux subtracted in 200 components = 0.00283782 Jy ! Clean residual min=-0.005980 max=0.004606 Jy/beam ! Clean residual mean=0.000005 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 2.55884 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 2.55884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070950Jy sigma=0.000640 ! Fit after self-cal, rms=0.070945Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070945Jy sigma=0.000640 ! Fit after self-cal, rms=0.070942Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.921 mas, bmaj=15.97 mas, bpa=1.243 degrees ! Estimated noise=4029.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936674 Jy ! Component: 100 - total flux cleaned = 0.00156548 Jy ! Component: 150 - total flux cleaned = 0.00197699 Jy ! Component: 200 - total flux cleaned = 0.00227943 Jy ! Total flux subtracted in 200 components = 0.00227943 Jy ! Clean residual min=-0.004802 max=0.004702 Jy/beam ! Clean residual mean=0.000007 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 2.56112 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 2.56112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070892Jy sigma=0.000639 ! Fit after self-cal, rms=0.070887Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413101 Jy ! Component: 100 - total flux cleaned = 0.000416402 Jy ! Component: 150 - total flux cleaned = 0.000258999 Jy ! Component: 200 - total flux cleaned = 0.000198813 Jy ! Total flux subtracted in 200 components = 0.000198813 Jy ! Clean residual min=-0.004592 max=0.004634 Jy/beam ! Clean residual mean=0.000006 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 2.56132 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 2.56132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070876Jy sigma=0.000639 ! Fit after self-cal, rms=0.070874Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.621 mas, bmaj=11.57 mas, bpa=16.94 degrees ! Estimated noise=3327.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.621 x 11.57 at 16.94 degrees (North through East) ! Clean map min=-0.0056518 max=2.35 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070874Jy sigma=0.000639 ! Fit after self-cal, rms=0.062284Jy sigma=0.000563 ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.57 mas, bpa=16.93 degrees ! Estimated noise=3328.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133393 Jy ! Component: 100 - total flux cleaned = 0.00158531 Jy ! Component: 150 - total flux cleaned = 0.00179998 Jy ! Component: 200 - total flux cleaned = 0.00189263 Jy ! Total flux subtracted in 200 components = 0.00189263 Jy ! Clean residual min=-0.005887 max=0.004194 Jy/beam ! Clean residual mean=0.000003 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 2.56321 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 153 components and 2.56321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062171Jy sigma=0.000562 ! Fit after self-cal, rms=0.062168Jy sigma=0.000562 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453723 Jy ! Component: 100 - total flux cleaned = 0.000540014 Jy ! Component: 150 - total flux cleaned = 0.00054049 Jy ! Component: 200 - total flux cleaned = 0.000615372 Jy ! Total flux subtracted in 200 components = 0.000615372 Jy ! Clean residual min=-0.005810 max=0.004184 Jy/beam ! Clean residual mean=0.000003 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 2.56383 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 165 components and 2.56383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062121Jy sigma=0.000562 ! Fit after self-cal, rms=0.062120Jy sigma=0.000562 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062120Jy sigma=0.000562 ! Fit after self-cal, rms=0.062118Jy sigma=0.000562 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=10.04 mas, bpa=16.99 degrees ! Estimated noise=4240.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.81931 Jy ! Component: 100 - total flux cleaned = 2.24351 Jy ! Component: 150 - total flux cleaned = 2.40207 Jy ! Component: 200 - total flux cleaned = 2.46867 Jy ! Total flux subtracted in 200 components = 2.46867 Jy ! Clean residual min=-0.021343 max=0.028809 Jy/beam ! Clean residual mean=0.000014 rms=0.006850 Jy/beam ! Combined flux in latest and established models = 2.46867 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 2.46867 Jy ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.56 mas, bpa=16.93 degrees ! Estimated noise=3328.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363603 Jy ! Component: 100 - total flux cleaned = 0.055016 Jy ! Component: 150 - total flux cleaned = 0.0649329 Jy ! Component: 200 - total flux cleaned = 0.0711309 Jy ! Total flux subtracted in 200 components = 0.0711309 Jy ! Clean residual min=-0.009468 max=0.008362 Jy/beam ! Clean residual mean=0.000008 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 2.5398 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 2.5398 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.92 mas, bmaj=15.97 mas, bpa=1.239 degrees ! Estimated noise=4029.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00878021 Jy ! Component: 100 - total flux cleaned = 0.0131032 Jy ! Component: 150 - total flux cleaned = 0.0160143 Jy ! Component: 200 - total flux cleaned = 0.0179562 Jy ! Total flux subtracted in 200 components = 0.0179562 Jy ! Clean residual min=-0.007147 max=0.004864 Jy/beam ! Clean residual mean=0.000008 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 2.55775 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176776 Jy ! Component: 100 - total flux cleaned = 0.0030286 Jy ! Component: 150 - total flux cleaned = 0.00400787 Jy ! Component: 200 - total flux cleaned = 0.00476594 Jy ! Total flux subtracted in 200 components = 0.00476594 Jy ! Clean residual min=-0.005751 max=0.004121 Jy/beam ! Clean residual mean=0.000005 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 2.56252 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 75 components and 2.56252 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.56 mas, bpa=16.93 degrees ! Estimated noise=3328.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221241 Jy ! Component: 100 - total flux cleaned = 0.00316348 Jy ! Component: 150 - total flux cleaned = 0.00343315 Jy ! Component: 200 - total flux cleaned = 0.00356322 Jy ! Total flux subtracted in 200 components = 0.00356322 Jy ! Clean residual min=-0.005227 max=0.005222 Jy/beam ! Clean residual mean=0.000001 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 2.56608 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 2.56608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062753Jy sigma=0.000567 ! Fit after self-cal, rms=0.062694Jy sigma=0.000567 wmodel J1337-1257_S_2017_06_10_pus_map.mod ! Writing 92 model components to file: J1337-1257_S_2017_06_10_pus_map.mod wobs J1337-1257_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1337-1257_S_2017_06_10_pus_uvs.fits wwins J1337-1257_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J1337-1257_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000566409 Jy ! Component: 100 - total flux cleaned = -0.000168973 Jy ! Component: 150 - total flux cleaned = 0.000510225 Jy ! Component: 200 - total flux cleaned = 0.00143483 Jy ! Component: 250 - total flux cleaned = 0.00217618 Jy ! Component: 300 - total flux cleaned = 0.002881 Jy ! Component: 350 - total flux cleaned = 0.00367535 Jy ! Component: 400 - total flux cleaned = 0.00431645 Jy ! Component: 450 - total flux cleaned = 0.00509901 Jy ! Component: 500 - total flux cleaned = 0.00579718 Jy ! Component: 550 - total flux cleaned = 0.00646789 Jy ! Component: 600 - total flux cleaned = 0.00691568 Jy ! Component: 650 - total flux cleaned = 0.00739545 Jy ! Component: 700 - total flux cleaned = 0.0077674 Jy ! Component: 750 - total flux cleaned = 0.00830644 Jy ! Component: 800 - total flux cleaned = 0.00865628 Jy ! Component: 850 - total flux cleaned = 0.00891195 Jy ! Component: 900 - total flux cleaned = 0.00924215 Jy ! Component: 950 - total flux cleaned = 0.00960146 Jy ! Component: 1000 - total flux cleaned = 0.00987484 Jy ! Component: 1050 - total flux cleaned = 0.0101804 Jy ! Component: 1100 - total flux cleaned = 0.0104778 Jy ! Component: 1150 - total flux cleaned = 0.0108405 Jy ! Component: 1200 - total flux cleaned = 0.0110177 Jy ! Component: 1250 - total flux cleaned = 0.0111926 Jy ! Component: 1300 - total flux cleaned = 0.0114656 Jy ! Component: 1350 - total flux cleaned = 0.0115991 Jy ! Component: 1400 - total flux cleaned = 0.0118297 Jy ! Component: 1450 - total flux cleaned = 0.0121211 Jy ! Component: 1500 - total flux cleaned = 0.0123441 Jy ! Component: 1550 - total flux cleaned = 0.0125952 Jy ! Component: 1600 - total flux cleaned = 0.0128112 Jy ! Component: 1650 - total flux cleaned = 0.0129331 Jy ! Component: 1700 - total flux cleaned = 0.0130535 Jy ! Component: 1750 - total flux cleaned = 0.0132902 Jy ! Component: 1800 - total flux cleaned = 0.0133778 Jy ! Component: 1850 - total flux cleaned = 0.0134641 Jy ! Component: 1900 - total flux cleaned = 0.0136058 Jy ! Component: 1950 - total flux cleaned = 0.0137734 Jy ! Component: 2000 - total flux cleaned = 0.0138565 Jy ! Component: 2050 - total flux cleaned = 0.0139934 Jy ! Component: 2100 - total flux cleaned = 0.0141552 Jy ! Component: 2150 - total flux cleaned = 0.0141283 Jy ! Component: 2200 - total flux cleaned = 0.0143395 Jy ! Component: 2250 - total flux cleaned = 0.0143128 Jy ! Component: 2300 - total flux cleaned = 0.0144176 Jy ! Component: 2350 - total flux cleaned = 0.0145479 Jy ! Component: 2400 - total flux cleaned = 0.0146774 Jy ! Component: 2450 - total flux cleaned = 0.0147808 Jy ! Component: 2500 - total flux cleaned = 0.014858 Jy ! Component: 2550 - total flux cleaned = 0.0149609 Jy ! Component: 2600 - total flux cleaned = 0.015115 Jy ! Component: 2650 - total flux cleaned = 0.0151406 Jy ! Component: 2700 - total flux cleaned = 0.0152171 Jy ! Component: 2750 - total flux cleaned = 0.0151913 Jy ! Component: 2800 - total flux cleaned = 0.0152426 Jy ! Component: 2850 - total flux cleaned = 0.0152166 Jy ! Component: 2900 - total flux cleaned = 0.0152161 Jy ! Component: 2950 - total flux cleaned = 0.0152159 Jy ! Component: 3000 - total flux cleaned = 0.015216 Jy ! Component: 3050 - total flux cleaned = 0.0152421 Jy ! Component: 3100 - total flux cleaned = 0.015295 Jy ! Component: 3150 - total flux cleaned = 0.0152953 Jy ! Component: 3200 - total flux cleaned = 0.0152953 Jy ! Component: 3250 - total flux cleaned = 0.0152416 Jy ! Component: 3300 - total flux cleaned = 0.015214 Jy ! Component: 3350 - total flux cleaned = 0.0151864 Jy ! Component: 3400 - total flux cleaned = 0.0151585 Jy ! Component: 3450 - total flux cleaned = 0.0151865 Jy ! Component: 3500 - total flux cleaned = 0.0151865 Jy ! Component: 3550 - total flux cleaned = 0.0152153 Jy ! Component: 3600 - total flux cleaned = 0.0152446 Jy ! Component: 3650 - total flux cleaned = 0.0152738 Jy ! Component: 3700 - total flux cleaned = 0.0153042 Jy ! Component: 3750 - total flux cleaned = 0.015335 Jy ! Component: 3800 - total flux cleaned = 0.0153661 Jy ! Component: 3850 - total flux cleaned = 0.0153972 Jy ! Component: 3900 - total flux cleaned = 0.0154603 Jy ! Component: 3950 - total flux cleaned = 0.015493 Jy ! Component: 4000 - total flux cleaned = 0.015493 Jy ! Component: 4050 - total flux cleaned = 0.015493 Jy ! Total flux subtracted in 4096 components = 0.0154931 Jy ! Clean residual min=-0.002014 max=0.001929 Jy/beam ! Clean residual mean=0.000002 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 2.58157 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 320 components and 2.58157 Jy ![Exited script file: muppet] wmap "J1337-1257_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.56 at 16.93 degrees (North through East) ! Clean map min=-0.0036927 max=2.3504 Jy/beam ! Writing clean map to FITS file: J1337-1257_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.35044 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000559777 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0714474 0.0714474 0.142895 0.28579 0.571579 1.14316 2.28632 4.57263 9.14527 18.2905 36.5811 73.1622 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.35 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.56 at 16.93 degrees (North through East) ! Clean map min=-0.0036927 max=2.3504 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1337-1257_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:54:59 2019